These failed due to a bug in verifier bounds handling.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix the few existing test cases that used mixed signed/unsigned
bounds and switch them only to one flavor. Reason why we need this
is that proper boundaries cannot be derived from mixed tests.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For the test_verifier case, it's quite hard to parse log level 2 to
figure out what's causing an issue when used to log level 1. We do
want to use bpf_verify_program() in order to simulate some of the
tests with strict alignment. So just add an argument to pass the level
and put it to 1 for test_verifier.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Edward reported that there's an issue in min/max value bounds
tracking when signed and unsigned compares both provide hints
on limits when having unknown variables. E.g. a program such
as the following should have been rejected:

   0: (7a) *(u64 *)(r10 -8) = 0
   1: (bf) r2 = r10
   2: (07) r2 += -8
   3: (18) r1 = 0xffff8a94cda93400
   5: (85) call bpf_map_lookup_elem#1
   6: (15) if r0 == 0x0 goto pc+7
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp
   7: (7a) *(u64 *)(r10 -16) = -8
   8: (79) r1 = *(u64 *)(r10 -16)
   9: (b7) r2 = -1
  10: (2d) if r1 > r2 goto pc+3
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0
  R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
  11: (65) if r1 s> 0x1 goto pc+2
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=1
  R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
  12: (0f) r0 += r1
  13: (72) *(u8 *)(r0 +0) = 0
  R0=map_value_adj(ks=8,vs=8,id=0),min_value=0,max_value=1 R1=inv,min_value=0,max_value=1
  R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
  14: (b7) r0 = 0
  15: (95) exit

What happens is that in the first part ...

   8: (79) r1 = *(u64 *)(r10 -16)
   9: (b7) r2 = -1
  10: (2d) if r1 > r2 goto pc+3

... r1 carries an unsigned value, and is compared as unsigned
against a register carrying an immediate. Verifier deduces in
reg_set_min_max() that since the compare is unsigned and operation
is greater than (>), that in the fall-through/false case, r1's
minimum bound must be 0 and maximum bound must be r2. Latter is
larger than the bound and thus max value is reset back to being
'invalid' aka BPF_REGISTER_MAX_RANGE. Thus, r1 state is now
'R1=inv,min_value=0'. The subsequent test ...

  11: (65) if r1 s> 0x1 goto pc+2

... is a signed compare of r1 with immediate value 1. Here,
verifier deduces in reg_set_min_max() that since the compare
is signed this time and operation is greater than (>), that
in the fall-through/false case, we can deduce that r1's maximum
bound must be 1, meaning with prior test, we result in r1 having
the following state: R1=inv,min_value=0,max_value=1. Given that
the actual value this holds is -8, the bounds are wrongly deduced.
When this is being added to r0 which holds the map_value(_adj)
type, then subsequent store access in above case will go through
check_mem_access() which invokes check_map_access_adj(), that
will then probe whether the map memory is in bounds based
on the min_value and max_value as well as access size since
the actual unknown value is min_value <= x <= max_value; commit
fce366a9 ("bpf, verifier: fix alu ops against map_value{,
_adj} register types") provides some more explanation on the
semantics.

It's worth to note in this context that in the current code,
min_value and max_value tracking are used for two things, i)
dynamic map value access via check_map_access_adj() and since
commit 06c1c049 ("bpf: allow helpers access to variable memory")
ii) also enforced at check_helper_mem_access() when passing a
memory address (pointer to packet, map value, stack) and length
pair to a helper and the length in this case is an unknown value
defining an access range through min_value/max_value in that
case. The min_value/max_value tracking is /not/ used in the
direct packet access case to track ranges. However, the issue
also affects case ii), for example, the following crafted program
based on the same principle must be rejected as well:

   0: (b7) r2 = 0
   1: (bf) r3 = r10
   2: (07) r3 += -512
   3: (7a) *(u64 *)(r10 -16) = -8
   4: (79) r4 = *(u64 *)(r10 -16)
   5: (b7) r6 = -1
   6: (2d) if r4 > r6 goto pc+5
  R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512
  R4=inv,min_value=0 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
   7: (65) if r4 s> 0x1 goto pc+4
  R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512
  R4=inv,min_value=0,max_value=1 R6=imm-1,max_value=18446744073709551615,min_align=1
  R10=fp
   8: (07) r4 += 1
   9: (b7) r5 = 0
  10: (6a) *(u16 *)(r10 -512) = 0
  11: (85) call bpf_skb_load_bytes#26
  12: (b7) r0 = 0
  13: (95) exit

Meaning, while we initialize the max_value stack slot that the
verifier thinks we access in the [1,2] range, in reality we
pass -7 as length which is interpreted as u32 in the helper.
Thus, this issue is relevant also for the case of helper ranges.
Resetting both bounds in check_reg_overflow() in case only one
of them exceeds limits is also not enough as similar test can be
created that uses values which are within range, thus also here
learned min value in r1 is incorrect when mixed with later signed
test to create a range:

   0: (7a) *(u64 *)(r10 -8) = 0
   1: (bf) r2 = r10
   2: (07) r2 += -8
   3: (18) r1 = 0xffff880ad081fa00
   5: (85) call bpf_map_lookup_elem#1
   6: (15) if r0 == 0x0 goto pc+7
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp
   7: (7a) *(u64 *)(r10 -16) = -8
   8: (79) r1 = *(u64 *)(r10 -16)
   9: (b7) r2 = 2
  10: (3d) if r2 >= r1 goto pc+3
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
  R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
  11: (65) if r1 s> 0x4 goto pc+2
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0
  R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
  12: (0f) r0 += r1
  13: (72) *(u8 *)(r0 +0) = 0
  R0=map_value_adj(ks=8,vs=8,id=0),min_value=3,max_value=4
  R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
  14: (b7) r0 = 0
  15: (95) exit

This leaves us with two options for fixing this: i) to invalidate
all prior learned information once we switch signed context, ii)
to track min/max signed and unsigned boundaries separately as
done in [0]. (Given latter introduces major changes throughout
the whole verifier, it's rather net-next material, thus this
patch follows option i), meaning we can derive bounds either
from only signed tests or only unsigned tests.) There is still the
case of adjust_reg_min_max_vals(), where we adjust bounds on ALU
operations, meaning programs like the following where boundaries
on the reg get mixed in context later on when bounds are merged
on the dst reg must get rejected, too:

   0: (7a) *(u64 *)(r10 -8) = 0
   1: (bf) r2 = r10
   2: (07) r2 += -8
   3: (18) r1 = 0xffff89b2bf87ce00
   5: (85) call bpf_map_lookup_elem#1
   6: (15) if r0 == 0x0 goto pc+6
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp
   7: (7a) *(u64 *)(r10 -16) = -8
   8: (79) r1 = *(u64 *)(r10 -16)
   9: (b7) r2 = 2
  10: (3d) if r2 >= r1 goto pc+2
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
  R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
  11: (b7) r7 = 1
  12: (65) if r7 s> 0x0 goto pc+2
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
  R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,max_value=0 R10=fp
  13: (b7) r0 = 0
  14: (95) exit

  from 12 to 15: R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0
  R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,min_value=1 R10=fp
  15: (0f) r7 += r1
  16: (65) if r7 s> 0x4 goto pc+2
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
  R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp
  17: (0f) r0 += r7
  18: (72) *(u8 *)(r0 +0) = 0
  R0=map_value_adj(ks=8,vs=8,id=0),min_value=4,max_value=4 R1=inv,min_value=3
  R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp
  19: (b7) r0 = 0
  20: (95) exit

Meaning, in adjust_reg_min_max_vals() we must also reset range
values on the dst when src/dst registers have mixed signed/
unsigned derived min/max value bounds with one unbounded value
as otherwise they can be added together deducing false boundaries.
Once both boundaries are established from either ALU ops or
compare operations w/o mixing signed/unsigned insns, then they
can safely be added to other regs also having both boundaries
established. Adding regs with one unbounded side to a map value
where the bounded side has been learned w/o mixing ops is
possible, but the resulting map value won't recover from that,
meaning such op is considered invalid on the time of actual
access. Invalid bounds are set on the dst reg in case i) src reg,
or ii) in case dst reg already had them. The only way to recover
would be to perform i) ALU ops but only 'add' is allowed on map
value types or ii) comparisons, but these are disallowed on
pointers in case they span a range. This is fine as only BPF_JEQ
and BPF_JNE may be performed on PTR_TO_MAP_VALUE_OR_NULL registers
which potentially turn them into PTR_TO_MAP_VALUE type depending
on the branch, so only here min/max value cannot be invalidated
for them.

In terms of state pruning, value_from_signed is considered
as well in states_equal() when dealing with adjusted map values.
With regards to breaking existing programs, there is a small
risk, but use-cases are rather quite narrow where this could
occur and mixing compares probably unlikely.

Joint work with Josef and Edward.

  [0] https://lists.iovisor.org/pipermail/iovisor-dev/2017-June/000822.html

Fixes: 48461135 ("bpf: allow access into map value arrays")
Reported-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In some cases, offset can overflow and can cause an infinite loop in
ip6_find_1stfragopt(). Make it unsigned int to prevent the overflow, and
cap it at IPV6_MAXPLEN, since packets larger than that should be invalid.

This problem has been here since before the beginning of git history.
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The array data is only populated with valid information from userspace
if cmd != SIOCDEVPRIVATE, other cases the array contains garbage on
the stack. The subsequent switch statement acts on a subcommand in
data[0] which could be any garbage value if cmd is SIOCDEVPRIVATE which
seems incorrect to me.  Instead, just return EOPNOTSUPP for the case
where cmd == SIOCDEVPRIVATE to avoid this issue.

As a side note, I suspect that the original intention of the code
was for this ioctl to work just for cmd == SIOCDEVPRIVATE (and the
current logic is reversed). However, I don't wont to change the current
semantics in case any userspace code relies on this existing behaviour.

Detected by CoverityScan, CID#139647 ("Uninitialized scalar variable")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit cd8966e7.

The duplicate CHANGEADDR event message is sent regardless of link
status whereas the setlink changes only generate a notification when
the link is up. Not sending a notification when the link is down breaks
dhcpcd which only processes hwaddr changes when the link is down.

Fixes reported regression:
    https://bugzilla.kernel.org/show_bug.cgi?id=196355Reported-by: NYaroslav Isakov <yaroslav.isakov@gmail.com>
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit f39908d3 ('net: dsa: mv88e6xxx: Set the CMODE for mv88e6390
ports 9 & 10') added support for setting the CMODE for the 6390X family,
but only enabled it for 9290 and 6390 - and left out 6390X.

Fix support for setting the CMODE on 6390X also by assigning
mv88e6390x_port_set_cmode() to the .port_set_cmode function pointer in
mv88e6390x_ops too.

Fixes: f39908d3 ("net: dsa: mv88e6xxx: Set the CMODE for mv88e6390 ports 9 & 10")
Signed-off-by: NMartin Hundebøll <mnhu@prevas.dk>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add SoC specific compatibility strings to the Broadcom DTE
based PTP clock binding document.

Fixed the document heading and node name.

Fixes: 80d60761 ("dt-binding: ptp: add bindings document for dte based ptp clock")
Signed-off-by: NArun Parameswaran <arun.parameswaran@broadcom.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unconditional reset dwmac before HW init if reset controller is present.

In existing implementation we reset dwmac only after second module
probing:
(module load -> unload -> load again [reset happens])

Now we reset dwmac at every module load:
(module load [reset happens] -> unload -> load again [reset happens])

Also some reset controllers have only reset callback instead of
assert + deassert callbacks pair, so handle this case.
Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ifr.ifr_name is passed around and assumed to be NULL terminated.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ifr name is assumed to be a valid string by the kernel, but nothing
was forcing username to pass a valid string.

In turn, this would cause panics as we tried to access the string
past it's valid memory.
Signed-off-by: NSasha Levin <alexander.levin@verizon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We accidentally return an uninitialized variable.

Fixes: cf56c2f8 ("netfilter: remove old pre-netns era hook api")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree,
they are:

1) Missing netlink message sanity check in nfnetlink, patch from
   Mateusz Jurczyk.

2) We now have netfilter per-netns hooks, so let's kill global hook
   infrastructure, this infrastructure is known to be racy with netns.
   We don't care about out of tree modules. Patch from Florian Westphal.

3) find_appropriate_src() is buggy when colissions happens after the
   conversion of the nat bysource to rhashtable. Also from Florian.

4) Remove forward chain in nf_tables arp family, it's useless and it is
   causing quite a bit of confusion, from Florian Westphal.

5) nf_ct_remove_expect() is called with the wrong parameter, causing
   kernel oops, patch from Florian Westphal.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric noticed that in udp_recvmsg() we still need to access
skb->dst while processing the IP options.
Since commit 0a463c78 ("udp: avoid a cache miss on dequeue")
skb->dst is no more available at recvmsg() time and bad things
will happen if we enter the relevant code path.

This commit address the issue, avoid clearing skb->dst if
any IP options are present into the relevant skb.
Since the IP CB is contained in the first skb cacheline, we can
test it to decide to leverage the consume_stateless_skb()
optimization, without measurable additional cost in the faster
path.

v1 -> v2: updated commit message tags

Fixes: 0a463c78 ("udp: avoid a cache miss on dequeue")
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Reported-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If 'dma_set_mask_and_coherent()' fails, we must undo the previous
'pci_request_regions()' call.
Adjust corresponding 'goto' to jump at the right place of the error
handling path.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

KMSAN reported use of uninitialized memory in skb_set_hash_from_sk(),
which originated from the TCP request socket created in
cookie_v6_check():

 ==================================================================
 BUG: KMSAN: use of uninitialized memory in tcp_transmit_skb+0xf77/0x3ec0
 CPU: 1 PID: 2949 Comm: syz-execprog Not tainted 4.11.0-rc5+ #2931
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
 TCP: request_sock_TCPv6: Possible SYN flooding on port 20028. Sending cookies.  Check SNMP counters.
 Call Trace:
  <IRQ>
  __dump_stack lib/dump_stack.c:16
  dump_stack+0x172/0x1c0 lib/dump_stack.c:52
  kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:927
  __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:469
  skb_set_hash_from_sk ./include/net/sock.h:2011
  tcp_transmit_skb+0xf77/0x3ec0 net/ipv4/tcp_output.c:983
  tcp_send_ack+0x75b/0x830 net/ipv4/tcp_output.c:3493
  tcp_delack_timer_handler+0x9a6/0xb90 net/ipv4/tcp_timer.c:284
  tcp_delack_timer+0x1b0/0x310 net/ipv4/tcp_timer.c:309
  call_timer_fn+0x240/0x520 kernel/time/timer.c:1268
  expire_timers kernel/time/timer.c:1307
  __run_timers+0xc13/0xf10 kernel/time/timer.c:1601
  run_timer_softirq+0x36/0xa0 kernel/time/timer.c:1614
  __do_softirq+0x485/0x942 kernel/softirq.c:284
  invoke_softirq kernel/softirq.c:364
  irq_exit+0x1fa/0x230 kernel/softirq.c:405
  exiting_irq+0xe/0x10 ./arch/x86/include/asm/apic.h:657
  smp_apic_timer_interrupt+0x5a/0x80 arch/x86/kernel/apic/apic.c:966
  apic_timer_interrupt+0x86/0x90 arch/x86/entry/entry_64.S:489
 RIP: 0010:native_restore_fl ./arch/x86/include/asm/irqflags.h:36
 RIP: 0010:arch_local_irq_restore ./arch/x86/include/asm/irqflags.h:77
 RIP: 0010:__msan_poison_alloca+0xed/0x120 mm/kmsan/kmsan_instr.c:440
 RSP: 0018:ffff880024917cd8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
 RAX: 0000000000000246 RBX: ffff8800224c0000 RCX: 0000000000000005
 RDX: 0000000000000004 RSI: ffff880000000000 RDI: ffffea0000b6d770
 RBP: ffff880024917d58 R08: 0000000000000dd8 R09: 0000000000000004
 R10: 0000160000000000 R11: 0000000000000000 R12: ffffffff85abf810
 R13: ffff880024917dd8 R14: 0000000000000010 R15: ffffffff81cabde4
  </IRQ>
  poll_select_copy_remaining+0xac/0x6b0 fs/select.c:293
  SYSC_select+0x4b4/0x4e0 fs/select.c:653
  SyS_select+0x76/0xa0 fs/select.c:634
  entry_SYSCALL_64_fastpath+0x13/0x94 arch/x86/entry/entry_64.S:204
 RIP: 0033:0x4597e7
 RSP: 002b:000000c420037ee0 EFLAGS: 00000246 ORIG_RAX: 0000000000000017
 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004597e7
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
 RBP: 000000c420037ef0 R08: 000000c420037ee0 R09: 0000000000000059
 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000042dc20
 R13: 00000000000000f3 R14: 0000000000000030 R15: 0000000000000003
 chained origin:
  save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59
  kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302
  kmsan_save_stack mm/kmsan/kmsan.c:317
  kmsan_internal_chain_origin+0x12a/0x1f0 mm/kmsan/kmsan.c:547
  __msan_store_shadow_origin_4+0xac/0x110 mm/kmsan/kmsan_instr.c:259
  tcp_create_openreq_child+0x709/0x1ae0 net/ipv4/tcp_minisocks.c:472
  tcp_v6_syn_recv_sock+0x7eb/0x2a30 net/ipv6/tcp_ipv6.c:1103
  tcp_get_cookie_sock+0x136/0x5f0 net/ipv4/syncookies.c:212
  cookie_v6_check+0x17a9/0x1b50 net/ipv6/syncookies.c:245
  tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:989
  tcp_v6_do_rcv+0xdd8/0x1c60 net/ipv6/tcp_ipv6.c:1298
  tcp_v6_rcv+0x41a3/0x4f00 net/ipv6/tcp_ipv6.c:1487
  ip6_input_finish+0x82f/0x1ee0 net/ipv6/ip6_input.c:279
  NF_HOOK ./include/linux/netfilter.h:257
  ip6_input+0x239/0x290 net/ipv6/ip6_input.c:322
  dst_input ./include/net/dst.h:492
  ip6_rcv_finish net/ipv6/ip6_input.c:69
  NF_HOOK ./include/linux/netfilter.h:257
  ipv6_rcv+0x1dbd/0x22e0 net/ipv6/ip6_input.c:203
  __netif_receive_skb_core+0x2f6f/0x3a20 net/core/dev.c:4208
  __netif_receive_skb net/core/dev.c:4246
  process_backlog+0x667/0xba0 net/core/dev.c:4866
  napi_poll net/core/dev.c:5268
  net_rx_action+0xc95/0x1590 net/core/dev.c:5333
  __do_softirq+0x485/0x942 kernel/softirq.c:284
 origin:
  save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59
  kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302
  kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:198
  kmsan_kmalloc+0x7f/0xe0 mm/kmsan/kmsan.c:337
  kmem_cache_alloc+0x1c2/0x1e0 mm/slub.c:2766
  reqsk_alloc ./include/net/request_sock.h:87
  inet_reqsk_alloc+0xa4/0x5b0 net/ipv4/tcp_input.c:6200
  cookie_v6_check+0x4f4/0x1b50 net/ipv6/syncookies.c:169
  tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:989
  tcp_v6_do_rcv+0xdd8/0x1c60 net/ipv6/tcp_ipv6.c:1298
  tcp_v6_rcv+0x41a3/0x4f00 net/ipv6/tcp_ipv6.c:1487
  ip6_input_finish+0x82f/0x1ee0 net/ipv6/ip6_input.c:279
  NF_HOOK ./include/linux/netfilter.h:257
  ip6_input+0x239/0x290 net/ipv6/ip6_input.c:322
  dst_input ./include/net/dst.h:492
  ip6_rcv_finish net/ipv6/ip6_input.c:69
  NF_HOOK ./include/linux/netfilter.h:257
  ipv6_rcv+0x1dbd/0x22e0 net/ipv6/ip6_input.c:203
  __netif_receive_skb_core+0x2f6f/0x3a20 net/core/dev.c:4208
  __netif_receive_skb net/core/dev.c:4246
  process_backlog+0x667/0xba0 net/core/dev.c:4866
  napi_poll net/core/dev.c:5268
  net_rx_action+0xc95/0x1590 net/core/dev.c:5333
  __do_softirq+0x485/0x942 kernel/softirq.c:284
 ==================================================================

Similar error is reported for cookie_v4_check().

Fixes: 58d607d3 ("tcp: provide skb->hash to synack packets")
Signed-off-by: NAlexander Potapenko <glider@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The global percpu variable ppp_xmit_recursion is used to detect the ppp
xmit recursion to avoid the deadlock, which is caused by one CPU tries to
lock the xmit lock twice. But it would report false recursion when one CPU
wants to send the skb from two different PPP devices, like one L2TP on the
PPPoE. It is a normal case actually.

Now use one percpu member of struct ppp instead of the gloable variable to
detect the xmit recursion of one ppp device.

Fixes: 55454a56 ("ppp: avoid dealock on recursive xmit")
Signed-off-by: NGao Feng <gfree.wind@vip.163.com>
Signed-off-by: NLiu Jianying <jianying.liu@ikuai8.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When req->rsk_listener is NULL, sk_to_full_sk() returns
NULL too, so we have to check its return value against
NULL here.

Fixes: 40304b2a ("bpf: BPF support for sock_ops")
Reported-by: NDavid Ahern <dsahern@gmail.com>
Tested-by: NDavid Ahern <dsahern@gmail.com>
Cc: Lawrence Brakmo <brakmo@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

GCC 7 added a new -Wimplicit-fallthrough warning.  It's only enabled
with W=1, but since linux/jhash.h is included in over hundred places
(including other global headers) it seems worthwhile fixing this
warning.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We crash in __nf_ct_expect_check, it calls nf_ct_remove_expect on the
uninitialised expectation instead of existing one, so del_timer chokes
on random memory address.

Fixes: ec0e3f01 ("netfilter: nf_ct_expect: Add nf_ct_remove_expect()")
Reported-by: NSergey Kvachonok <ravenexp@gmail.com>
Tested-by: NSergey Kvachonok <ravenexp@gmail.com>
Cc: Gao Feng <fgao@ikuai8.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

arp packets cannot be forwarded.

They can be bridged, but then they can be filtered using
either ebtables or nftables bridge family.

The bridge netfilter exposes a "call-arptables" switch which
pushes packets into arptables, but lets not expose this for nftables, so better
close this asap.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

When doing initial conversion to rhashtable I replaced the bucket
walk with a single rhashtable_lookup_fast().

When moving to rhlist I failed to properly walk the list of identical
tuples, but that is what is needed for this to work correctly.
The table contains the original tuples, so the reply tuples are all
distinct.

We currently decide that mapping is (not) in range only based on the
first entry, but in case its not we need to try the reply tuple of the
next entry until we either find an in-range mapping or we checked
all the entries.

This bug makes nat core attempt collision resolution while it might be
able to use the mapping as-is.

Fixes: 870190a9 ("netfilter: nat: convert nat bysrc hash to rhashtable")
Reported-by: NJaco Kroon <jaco@uls.co.za>
Tested-by: NJaco Kroon <jaco@uls.co.za>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

no more users in the tree, remove this.

The old api is racy wrt. module removal, all users have been converted
to the netns-aware api.

The old api pretended we still have global hooks but that has not been
true for a long time.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Verify that the length of the socket buffer is sufficient to cover the
nlmsghdr structure before accessing the nlh->nlmsg_len field for further
input sanitization. If the client only supplies 1-3 bytes of data in
sk_buff, then nlh->nlmsg_len remains partially uninitialized and
contains leftover memory from the corresponding kernel allocation.
Operating on such data may result in indeterminate evaluation of the
nlmsg_len < NLMSG_HDRLEN expression.

The bug was discovered by a runtime instrumentation designed to detect
use of uninitialized memory in the kernel. The patch prevents this and
other similar tools (e.g. KMSAN) from flagging this behavior in the future.
Signed-off-by: NMateusz Jurczyk <mjurczyk@google.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Doug Berger says:

====================
bcmgenet: Fragmented SKB corrections

Two issues were observed in a review of the bcmgenet driver support for
fragmented SKBs which are addressed by this patch set.

The first addresses a problem that could occur if the driver is not able
to DMA map a fragment of the SKB.  This would be a highly unusual event
but it would leave the hardware descriptors in an invalid state which
should be prevented.

The second is a hazard that could occur if the driver is able to reclaim
the first control block of a fragmented SKB before all of its fragments
have completed processing by the hardware.  In this case the SKB could
be freed leading to reuse of memory that is still in use by hardware.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since the skb is attached to the first control block of a fragmented
skb it is possible that the skb could be freed when reclaiming that
control block before all fragments of the skb have been consumed by
the hardware and unmapped.

This commit introduces first_cb and last_cb pointers to the skb
control block used by the driver to keep track of which transmit
control blocks within a transmit ring are the first and last ones
associated with the skb.

It then splits the bcmgenet_free_cb() function into transmit
(bcmgenet_free_tx_cb) and receive (bcmgenet_free_rx_cb) versions
that can handle the unmapping of dma mapped memory and cleaning up
the corresponding control block structure so that the skb is only
freed after the last associated transmit control block is reclaimed.

Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case we fail to map a single fragment, we would be leaving the
transmit ring populated with stale entries.

This commit introduces the helper function bcmgenet_put_txcb()
which takes care of rewinding the per-ring write pointer back to
where we left.

It also consolidates the functionality of bcmgenet_xmit_single()
and bcmgenet_xmit_frag() into the bcmgenet_xmit() function to
make the unmapping of control blocks cleaner.

Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Suggested-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 07d4510f ("dt-bindings: net: bgmac: add bindings documentation for
bgmac") added both brcm,amac-nsp.txt and brcm,bgmac-nsp.txt. The former is
actually the one that got updated and is in use by the bgmac driver while the
latter is duplicating the former and is not used nor updated.

Fixes: 07d4510f ("dt-bindings: net: bgmac: add bindings documentation for bgmac")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Arvind Yadav says:

====================
Constify isdn pci_device_id's.

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  11803	    544	      1	  12348	   303c	isdn/hardware/avm/c4.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  11931	    416	      1	  12348	   303c	isdn/hardware/avm/c4.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  21656	   1024	     96	  22776	   58f8	isdn/hardware/mISDN/hfcpci.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  22424	    256	     96	  22776	   58f8	isdn/hardware/mISDN/hfcpci.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   9963	   1936	     16	  11915	   2e8b	isdn/hardware/mISDN/avmfritz.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  10091	   1808	     16	  11915	   2e8b	isdn/hardware/mISDN/avmfritz.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  13959	   4080	     24	  18063	   468f isdn/hardware/mISDN/w6692.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  14087	   3952	     24	  18063	   468f isdn/hardware/mISDN/w6692.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  63450	   1536	   1492	  66478	  103ae	isdn/hardware/mISDN/hfcmulti.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  64698	    288	   1492	  66478	  103ae	isdn/hardware/mISDN/hfcmulti.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  10941	   1776	     16	  12733	   31bd isdn/hardware/mISDN/netjet.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  11005	   1712	     16	  12733	   31bd isdn/hardware/mISDN/netjet.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   6224	    655	      8	   6887	   1ae7	isdn/hardware/eicon/divasmain.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   6608	    271	      8	   6887	   1ae7	isdn/hardware/eicon/divasmain.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   5989	    576	      0	   6565	   19a5 isdn/hisax/hisax_fcpcipnp.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   6085	    480	      0	   6565	   19a5 isdn/hisax/hisax_fcpcipnp.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  10512	    536	      4	  11052	   2b2c	drivers/isdn/hisax/hfc4s8s_l1.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  10672	    376	      4	  11052	   2b2c	drivers/isdn/hisax/hfc4s8s_l1.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  13686	   2064	   4416	  20166	   4ec6	drivers/isdn/hisax/config.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  15030	    720	   4416	  20166	   4ec6	drivers/isdn/hisax/config.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>