- 15 10月, 2011 2 次提交
-
-
由 Gustavo F. Padovan 提交于
Improve error handling in mgmt load_keys() Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Improve error handling at cmd_status() and cmd_complete() Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 21 9月, 2011 7 次提交
-
-
由 Andre Guedes 提交于
The mgmt_device_found event will be used to report LE devices found during discovery procedure. Since LE advertising reports events doesn't have class of device information, we need to check if 'dev_class' is not NULL before copying it. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
This reverts commit 5a0a8b49. If we use separate messages and list for SMP specific keys we can simplify the code. Conflicts: net/bluetooth/mgmt.c Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Antti Julku 提交于
Add management interface events for blocking/unblocking a device. Sender of the block device command gets cmd complete and other mgmt sockets get the event. Event is also sent to mgmt sockets when blocking is done with ioctl, e.g when blocking a device with hciconfig. This makes it possible for bluetoothd to track status of blocked devices when a third party block or unblocks a device. Event sending is handled in mgmt_device_blocked function which gets called from hci_blacklist_add in hci_core.c. A pending command is added in mgmt_block_device, so that it can found when sending the event - the event is not sent to the socket from which the pending command came. Locks were moved out from hci_core.c to hci_sock.c and mgmt.c, because locking is needed also for mgmt_pending_add in mgmt.c. Signed-off-by: NAntti Julku <antti.julku@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
This lifts the requirement of 16 digits pin codes when pairing with devices that do not support SSP when using the mgmt interface. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Antti Julku 提交于
Add command to management interface for enabling/disabling the fast connectable mode. Signed-off-by: NAntti Julku <antti.julku@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
One piece of information that was lost when using the mgmt interface, was the type of the connection. Using HCI events we used to know the type of the connection based on the type of the event, e.g. HCI_LE_Connection_Complete for LE links. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
Using the advertising cache we are able to infer the type of the remote device, and so trigger pairing over the correct link type. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 09 7月, 2011 2 次提交
-
-
由 Vinicius Costa Gomes 提交于
In some cases it will be useful having the key size used for encrypting the link. For example, some profiles may restrict some operations depending on the key length. The key size is stored in the key that is passed to userspace using the pin_length field in the key structure. For now this field is only valid for LE controllers. 3.0+HS controllers define the Read Encryption Key Size command, this field is intended for storing the value returned by that command. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
As the key format has changed to something that has a dynamic size, the way that keys are received and sent must be changed. The structure fields order is changed to make the parsing of the information received from the Management Interface easier. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 08 7月, 2011 1 次提交
-
-
由 Andre Guedes 提交于
All threads running in process context should disable local bottom halve before locking hdev->lock. This patch fix the following message generated when Bluetooh module is loaded with enable_mgmt=y (CONFIG_PROVE_LOCKING enabled). [ 107.880781] ================================= [ 107.881631] [ INFO: inconsistent lock state ] [ 107.881631] 2.6.39+ #1 [ 107.881631] --------------------------------- [ 107.881631] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 107.881631] rcuc0/7 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 107.881631] (&(&hdev->lock)->rlock){+.?...}, at: [<ffffffffa0012c8d>] mgmt_set_local_name_complete+0x84/0x10b [bluetooth] [ 107.881631] {SOFTIRQ-ON-W} state was registered at: [ 107.881631] [<ffffffff8105188b>] __lock_acquire+0x347/0xd52 [ 107.881631] [<ffffffff810526ac>] lock_acquire+0x8a/0xa7 [ 107.881631] [<ffffffff812b3758>] _raw_spin_lock+0x2c/0x3b [ 107.881631] [<ffffffffa0011cc2>] mgmt_control+0xd4d/0x175b [bluetooth] [ 107.881631] [<ffffffffa0013275>] hci_sock_sendmsg+0x97/0x293 [bluetooth] [ 107.881631] [<ffffffff8121940c>] sock_aio_write+0x126/0x13a [ 107.881631] [<ffffffff810a35fa>] do_sync_write+0xba/0xfa [ 107.881631] [<ffffffff810a3beb>] vfs_write+0xaa/0xca [ 107.881631] [<ffffffff810a3d80>] sys_write+0x45/0x69 [ 107.881631] [<ffffffff812b4892>] system_call_fastpath+0x16/0x1b [ 107.881631] irq event stamp: 2100876 [ 107.881631] hardirqs last enabled at (2100876): [<ffffffff812b40d4>] restore_args+0x0/0x30 [ 107.881631] hardirqs last disabled at (2100875): [<ffffffff812b3f6a>] save_args+0x6a/0x70 [ 107.881631] softirqs last enabled at (2100862): [<ffffffff8106a805>] rcu_cpu_kthread+0x2b5/0x2e2 [ 107.881631] softirqs last disabled at (2100863): [<ffffffff812b56bc>] call_softirq+0x1c/0x26 [ 107.881631] [ 107.881631] other info that might help us debug this: [ 107.881631] Possible unsafe locking scenario: [ 107.881631] [ 107.881631] CPU0 [ 107.881631] ---- [ 107.881631] lock(&(&hdev->lock)->rlock); [ 107.881631] <Interrupt> [ 107.881631] lock(&(&hdev->lock)->rlock); [ 107.881631] [ 107.881631] *** DEADLOCK *** [ 107.881631] [ 107.881631] 1 lock held by rcuc0/7: [ 107.881631] #0: (hci_task_lock){++.-..}, at: [<ffffffffa0008353>] hci_rx_task+0x49/0x2f3 [bluetooth] [ 107.881631] [ 107.881631] stack backtrace: [ 107.881631] Pid: 7, comm: rcuc0 Not tainted 2.6.39+ #1 [ 107.881631] Call Trace: [ 107.881631] <IRQ> [<ffffffff812ae901>] print_usage_bug+0x1e7/0x1f8 [ 107.881631] [<ffffffff8100a796>] ? save_stack_trace+0x27/0x44 [ 107.881631] [<ffffffff8104fc3f>] ? print_irq_inversion_bug.part.26+0x19a/0x19a [ 107.881631] [<ffffffff810504bb>] mark_lock+0x106/0x258 [ 107.881631] [<ffffffff81051817>] __lock_acquire+0x2d3/0xd52 [ 107.881631] [<ffffffff8102be73>] ? vprintk+0x3ab/0x3d7 [ 107.881631] [<ffffffff810526ac>] lock_acquire+0x8a/0xa7 [ 107.881631] [<ffffffffa0012c8d>] ? mgmt_set_local_name_complete+0x84/0x10b [bluetooth] [ 107.881631] [<ffffffff81052615>] ? lock_release+0x16c/0x179 [ 107.881631] [<ffffffff812b3952>] _raw_spin_lock_bh+0x31/0x40 [ 107.881631] [<ffffffffa0012c8d>] ? mgmt_set_local_name_complete+0x84/0x10b [bluetooth] [ 107.881631] [<ffffffffa0012c8d>] mgmt_set_local_name_complete+0x84/0x10b [bluetooth] [ 107.881631] [<ffffffffa000d3fe>] hci_event_packet+0x122b/0x3e12 [bluetooth] [ 107.881631] [<ffffffff81050658>] ? mark_held_locks+0x4b/0x6d [ 107.881631] [<ffffffff812b3cff>] ? _raw_spin_unlock_irqrestore+0x40/0x4d [ 107.881631] [<ffffffff810507b9>] ? trace_hardirqs_on_caller+0x13f/0x172 [ 107.881631] [<ffffffff812b3d07>] ? _raw_spin_unlock_irqrestore+0x48/0x4d [ 107.881631] [<ffffffffa00083d2>] hci_rx_task+0xc8/0x2f3 [bluetooth] [ 107.881631] [<ffffffff8102f836>] ? __local_bh_enable+0x90/0xa4 [ 107.881631] [<ffffffff8102f5a9>] tasklet_action+0x87/0xe6 [ 107.881631] [<ffffffff8102fa11>] __do_softirq+0x9f/0x13f [ 107.881631] [<ffffffff812b56bc>] call_softirq+0x1c/0x26 [ 107.881631] <EOI> [<ffffffff810033b8>] ? do_softirq+0x46/0x9a [ 107.881631] [<ffffffff8106a805>] ? rcu_cpu_kthread+0x2b5/0x2e2 [ 107.881631] [<ffffffff8102f906>] _local_bh_enable_ip+0xac/0xc9 [ 107.881631] [<ffffffff8102f93b>] local_bh_enable+0xd/0xf [ 107.881631] [<ffffffff8106a805>] rcu_cpu_kthread+0x2b5/0x2e2 [ 107.881631] [<ffffffff81041586>] ? __init_waitqueue_head+0x46/0x46 [ 107.881631] [<ffffffff8106a550>] ? rcu_yield.constprop.42+0x98/0x98 [ 107.881631] [<ffffffff81040f0a>] kthread+0x7f/0x87 [ 107.881631] [<ffffffff812b55c4>] kernel_thread_helper+0x4/0x10 [ 107.881631] [<ffffffff812b40d4>] ? retint_restore_args+0x13/0x13 [ 107.881631] [<ffffffff81040e8b>] ? __init_kthread_worker+0x53/0x53 [ 107.881631] [<ffffffff812b55c0>] ? gs_change+0x13/0x13 Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 17 6月, 2011 1 次提交
-
-
由 Antti Julku 提交于
Management interface commands for blocking and unblocking devices. Signed-off-by: NAntti Julku <antti.julku@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 14 6月, 2011 1 次提交
-
-
由 Anderson Lizardo 提交于
The "dc" variable is initialized but not passed to hci_send_cmd(). Signed-off-by: NAnderson Lizardo <anderson.lizardo@openbossa.org> Signed-off-by: NBruna Moreira <bruna.moreira@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 09 6月, 2011 4 次提交
-
-
由 Waldemar Rymarkiewicz 提交于
As we cannot relay on a userspace mgmt api implementation we should verify if pin_code_reply in fact contains the secure pin code. If userspace replied with unsecure pincode when secure was required we will send pin_code_neg_reply to the controller. Signed-off-by: NWaldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Waldemar Rymarkiewicz 提交于
Signed-off-by: NWaldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johannes Berg 提交于
sparse complains about a few things that should be static. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
The get_connections function has no need to use hci_dev_list_lock. The code was there probably because of a copy-paste mistake. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 12 5月, 2011 1 次提交
-
-
由 Vinicius Costa Gomes 提交于
If we can't find a ACL link between the devices, we search the connection list one second time looking for LE links. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 29 4月, 2011 5 次提交
-
-
由 Johan Hedberg 提交于
Even for keys that shouldn't be stored some use cases require the knowledge of a new key having been created so that the conclusion of a successful pairing can be made. Therefore, always send the mgmt_new_key event but add a store_hint parameter to it to indicate to user space whether the key should be stored or not. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
User space shouldn't have any need for the old key type so remove it from the corresponding Management interface event. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
Link keys should only be stored if very specific criteria of the authentication process are fulfilled. This patch essentially copies the criteria that user space has so far been using to the kernel side so that the management interface works properly. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
When accepting a pairing request which fulfills the SSP auto-accept criteria we need to push the request all the way to the user for confirmation. This patch adds a new hint to the user_confirm_request management event so user space can know when to show a numeric comparison dialog and when to show a simple yes/no confirmation dialog. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Waldemar Rymarkiewicz 提交于
Extend the mgmt_pin_code_request interface to require secure pin code (16 digit) for authentication. This is a kernel part of the secure pin code requirement notification to user space agent. Code styling fix by Johan Hedberg. Signed-off-by: NWaldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 28 4月, 2011 2 次提交
-
-
由 Johan Hedberg 提交于
This patch adds a new event to the Management interface to track when local adapters are discovering remote devices. For now this only tracks BR/EDR discovery procedures. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NAnderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds start_discovery and stop_discovery commands to the management interface. Right now their implementation is fairly simplistic and the parameters are fixed to what user space has defaulted to so far. This is the very initial phase for discovery implementation into the kernel. Next steps include name resolution, LE scanning and bdaddr type handling. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NAnderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 06 4月, 2011 1 次提交
-
-
由 Gustavo F. Padovan 提交于
The allocation in mgmt_control() code are in user context and not locked by any spinlock, so it's not recommended the use of GFP_ATOMIC there. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 05 4月, 2011 3 次提交
-
-
由 Gustavo F. Padovan 提交于
spin_lock() and spin_unlock() are more apropiated for user context. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds a new remote_name event to the Management interface which is sent every time the name of a remote device is resolved (over BR/EDR). Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds a device_found event to the Management interface. For now the event only maps to BR/EDR inquiry result HCI events, but in the future the plan is to also use it for the LE device discovery process. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 01 4月, 2011 8 次提交
-
-
由 Johan Hedberg 提交于
The code was correctly calling _unlock at the end of the function but there was no actual _lock call anywhere. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds automated creation of the local EIR data based on what 16-bit UUIDs are registered and what the device name is. This should cover the majority use cases, however things like 32/128-bit UUIDs, TX power and Device ID will need to be added later to be on par with what bluetoothd is capable of doing (without the Management interface). Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Szymon Janc 提交于
This patch adds commands to add and remove remote OOB data to the managment interface. Remote data is stored in kernel and can be used by corresponding HCI commands and events when needed. Signed-off-by: NSzymon Janc <szymon.janc@tieto.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Szymon Janc 提交于
This patch adds a command to read local OOB data to the managment interface. The command maps directly to the Read Local OOB Data HCI command. Signed-off-by: NSzymon Janc <szymon.janc@tieto.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Szymon Janc 提交于
Since index is in mgmt_hdr it is possible to have mgmt command with no parameters that still needs to add itself to pending list. Signed-off-by: NSzymon Janc <szymon.janc@tieto.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Szymon Janc 提交于
This field holds not whole command but only command specific parameters. Signed-off-by: NSzymon Janc <szymon.janc@tieto.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds a new set_local_name management command as well as a local_name_changed management event. With these user space can both change the local name as well as monitor changes to it by others. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds the name of the adapter to the reply of the read_info management command. The management messages reserve 249 bytes for the name instead of 248 (like in the HCI spec) so that there is always a guarantee that it is nul-terminated. That way it can safely be passed onto string manipulation functions. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 25 3月, 2011 1 次提交
-
-
由 Johan Hedberg 提交于
The code was correctly calling _unlock at the end of the function but there was no actual _lock call anywhere. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 02 3月, 2011 1 次提交
-
-
由 Szymon Janc 提交于
Signed-off-by: NSzymon Janc <szymon.janc@tieto.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-