free_msi_irqs() is leaking memory, since list_for_each_entry(entry,
&dev->msi_list, list) {...} is never executed, because dev->msi_list is
made empty by the loop just above this one.

Fix it by relying on zero termination of attribute array like
populate_msi_sysfs() does.

Fixes: 1c51b50c ("PCI/MSI: Export MSI mode using attributes, not kobjects")
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: stable@vger.kernel.org	# v3.14+

Merge branches 'pci/host-designware', 'pci/host-imx6', 'pci/host-mvebu' and 'pci/host-tegra' into next

* pci/host-designware:
  PCI: designware: Remove unnecessary use of 'conf_lock' spinlock
  PCI: designware: Use new OF interrupt mapping when possible
  PCI: designware: Fix iATU programming for cfg1, io and mem viewport
  PCI: designware: Fix comment for setting number of lanes

* pci/host-imx6:
  PCI: designware: Split Exynos and i.MX bindings

* pci/host-mvebu:
  PCI: mvebu: Use '%pa' for printing 'phys_addr_t' type
  PCI: mvebu: Remove unnecessary use of 'conf_lock' spinlock
  PCI: mvebu: split PCIe BARs into multiple MBus windows when needed
  bus: mvebu-mbus: allow several windows with the same target/attribute
  bus: mvebu-mbus: Avoid setting an undefined window size
  PCI: mvebu: fix off-by-one in the computed size of the mbus windows

* pci/host-tegra:
  PCI: tegra: Use new OF interrupt mapping when possible

The glue around the core designware IP is significantly different between
the Exynos and i.MX implementation, which is reflected in the DT bindings.

This changes the i.MX6 binding to reuse as much as possible from the common
designware binding and removes old cruft.

I removed the optional GPIOs with the following reasoning:
- disable-gpio: endpoint specific GPIO, not currently wired up in any code.
  Should be handled by the PCI device driver, not the host controller
  driver.
- wake-up-gpio: same as above.
- power-on-gpio: No user in any upstream DT.  This should be handled by a
  regulator which shouldn't be controlled by the host driver, but rather by
  the PCI device driver.

[bhelgaas: whitespace fixes]
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

* pci/iommu:
  PCI: Add bridge DMA alias quirk for ASMedia and Tundra bridges
  PCI: Add support for PCIe-to-PCI bridge DMA alias quirks
  PCI: Add function 1 DMA alias quirk for Marvell devices
  PCI: Add function 0 DMA alias quirk for Ricoh devices
  PCI: Add support for DMA alias quirks
  PCI: Convert pci_dev_flags definitions to bit shifts
  PCI: Add DMA alias iterator

* pci/host-exynos:
  PCI: exynos: Fix add_pcie_port() section mismatch warning

* pci/host-imx6:
  PCI: imx6: Add support for MSI
  PCI: designware: Make MSI ISR shared IRQ aware
  PCI: imx6: Remove optional (and unused) IRQs
  PCI: imx6: Drop old IRQ mapping
  PCI: imx6: Use new clock names
  PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning

* pci/resource:
  i82875p_edac: Assign PCI resources before adding device

* pci/misc:
  ARM/PCI: Call pcie_bus_configure_settings() to set MPS
  PCI: Make pci_bus_add_device() void

Conflicts:
	drivers/edac/i82875p_edac.c

* pci/host-generic:
  MAINTAINERS: Add generic PCI host controller driver
  PCI: generic: Add generic PCI host controller driver

Conflicts:
	drivers/pci/host/Kconfig
	drivers/pci/host/Makefile

Add myself as the maintainer for the generic PCI host controller driver.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>

Add support for a generic PCI host controller, such as a
firmware-initialised device with static windows or an emulation by
something such as kvmtool.

The controller itself has no configuration registers and has its address
spaces described entirely by the device-tree (using the bindings from
ePAPR).  Both CAM and ECAM are supported for Config Space accesses.

Add corresponding documentation for the DT binding.

[bhelgaas: currently uses the ARM-specific pci_common_init_dev() interface]
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NLiviu Dudau <liviu.dudau@arm.com>

This patch adds support for Message Signaled Interrupts in the imx6-pcie
driver.
Signed-off-by: NHarro Haan <hrhaan@gmail.com>
Signed-off-by: NJuergen Beisert <jbe@pengutronix.de>
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRichard Zhu <r65037@freescale.com>

On i.MX6 the host controller MSI IRQ is shared with PCI legacy INTD.  Make
sure we don't bail too early from the IRQ handler.

The issue is fairly theoretical as it would require a system setup with a
PCIe switch where one connected device is using legacy INTD and another one
using MSI, but better fix it now.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NRichard Zhu <r65037@freescale.com>

They are dropped with the new binding.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRichard Zhu <r65037@freescale.com>

We don't need this anymore.  The IRQs are now properly mapped through the
DT.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRichard Zhu <r65037@freescale.com>

As defined in the new binding.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRichard Zhu <r65037@freescale.com>

Assign PCI resources before pci_bus_add_device().  The resources must be
assigned before a driver can claim the device.

[bhelgaas: changelog]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Call pcie_bus_configure_settings() on ARM, like for other platforms.
pcie_bus_configure_settings() makes sure the MPS across the bus is uniform
and provides the ability to tune the MRSS and MPS to higher performance
values.  This is particularly important for embedded where there is no
firmware to program these PCIe settings for the OS.
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
CC: Santosh Shilimkar <santosh.shilimkar@ti.com>

imx6_add_pcie_port() is called only from from imx6_pcie_probe() which is
annotated with __init.  Thus it makes sense to annotate
imx6_add_pcie_port() with __init to avoid section mismatch warnings.

[bhelgaas: changelog]
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Sean Cross <xobs@kosagi.com>

pci_bus_add_device() always returns 0, so there's no point in returning
anything at all.  Make it a void function and remove the tests of the
return value from the callers.

[bhelgaas: changelog, remove unused "err" from i82875p_setup_overfl_dev()]
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

add_pcie_port() is called only from exynos_pcie_probe(), which is annotated
with __init.  Thus it makes sense to annotate add_pcie_port() with __init
to avoid the following section mismatch warning:

  WARNING: drivers/pci/built-in.o(.text.unlikely+0xf8): Section mismatch in reference from the function add_pcie_port() to the function .init.text:dw_pcie_host_init()
    The function add_pcie_port() references
    the function __init dw_pcie_host_init().
    This is often because add_pcie_port lacks a __init
    annotation or the annotation of dw_pcie_host_init is wrong.

[bhelgaas: changelog]
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>

* pci/misc:
  PCI: Fix return value from pci_user_{read,write}_config_*()
  PCI: Turn pcibios_penalize_isa_irq() into a weak function
  PCI: Test for std config alias when testing extended config space

* pci/hotplug:
  PCI: cpqphp: Fix possible null pointer dereference
  NVMe: Implement PCIe reset notification callback
  PCI: Notify driver before and after device reset

* pci/pci_is_bridge:
  pcmcia: Use pci_is_bridge() to simplify code
  PCI: pciehp: Use pci_is_bridge() to simplify code
  PCI: acpiphp: Use pci_is_bridge() to simplify code
  PCI: cpcihp: Use pci_is_bridge() to simplify code
  PCI: shpchp: Use pci_is_bridge() to simplify code
  PCI: rpaphp: Use pci_is_bridge() to simplify code
  sparc/PCI: Use pci_is_bridge() to simplify code
  powerpc/PCI: Use pci_is_bridge() to simplify code
  ia64/PCI: Use pci_is_bridge() to simplify code
  x86/PCI: Use pci_is_bridge() to simplify code
  PCI: Use pci_is_bridge() to simplify code
  PCI: Add new pci_is_bridge() interface
  PCI: Rename pci_is_bridge() to pci_has_subordinate()

* pci/virtualization:
  PCI: Introduce new device binding path using pci_dev.driver_override

Conflicts:
	drivers/pci/pci-sysfs.c

* pci/host-exynos:
  PCI: exynos: Remove unnecessary OOM messages

* pci/host-rcar:
  PCI: rcar: Add gen2 device tree support
  PCI: rcar: Add R-Car PCIe device tree bindings
  PCI: rcar: Add MSI support for PCIe
  PCI: rcar: Add Renesas R-Car PCIe driver
  PCI: rcar: Use new OF interrupt mapping when possible

* pci/amd-numa:
  x86/PCI: Clean up and mark early_root_info_init() as deprecated
  x86/PCI: Work around AMD Fam15h BIOSes that fail to provide _PXM
  x86/PCI: Warn if we have to "guess" host bridge node information

The driver_override field allows us to specify the driver for a device
rather than relying on the driver to provide a positive match of the
device.  This shortcuts the existing process of looking up the vendor and
device ID, adding them to the driver new_id, binding the device, then
removing the ID, but it also provides a couple advantages.

First, the above existing process allows the driver to bind to any device
matching the new_id for the window where it's enabled.  This is often not
desired, such as the case of trying to bind a single device to a meta
driver like pci-stub or vfio-pci.  Using driver_override we can do this
deterministically using:

  echo pci-stub > /sys/bus/pci/devices/0000:03:00.0/driver_override
  echo 0000:03:00.0 > /sys/bus/pci/devices/0000:03:00.0/driver/unbind
  echo 0000:03:00.0 > /sys/bus/pci/drivers_probe

Previously we could not invoke drivers_probe after adding a device to
new_id for a driver as we get non-deterministic behavior whether the driver
we intend or the standard driver will claim the device.  Now it becomes a
deterministic process, only the driver matching driver_override will probe
the device.

To return the device to the standard driver, we simply clear the
driver_override and reprobe the device:

  echo > /sys/bus/pci/devices/0000:03:00.0/driver_override
  echo 0000:03:00.0 > /sys/bus/pci/devices/0000:03:00.0/driver/unbind
  echo 0000:03:00.0 > /sys/bus/pci/drivers_probe

Another advantage to this approach is that we can specify a driver override
to force a specific binding or prevent any binding.  For instance when an
IOMMU group is exposed to userspace through VFIO we require that all
devices within that group are owned by VFIO.  However, devices can be
hot-added into an IOMMU group, in which case we want to prevent the device
from binding to any driver (override driver = "none") or perhaps have it
automatically bind to vfio-pci.  With driver_override it's a simple matter
for this field to be set internally when the device is first discovered to
prevent driver matches.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The quirk is intended to be extremely generic, but we only apply it to
known offending devices.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=44881Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Several PCIe-to-PCI bridges fail to provide a PCIe capability, causing us
to handle them as conventional PCI devices when they really use the
requester ID of the secondary bus.  We need to differentiate these from
PCIe-to-PCI bridges that actually use the conventional PCI ID when a PCIe
capability is not present, such as those found on the root complex of may
Intel chipsets.  Add a dev_flag bit to identify devices to be handled as
standard PCIe-to-PCI bridges.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Several Marvell devices and a JMicron device have a similar DMA requester
ID problem to Ricoh, except they use function 1 as the PCIe requester ID.
Add a quirk for these to populate the DMA alias with the correct devfn.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679Tested-by: NGeorge Spelvin <linux@horizon.com>
Tested-by: NAndreas Schrägle <ajs124.ajs124@gmail.com>
Tested-by: NTobias N <qemu@suppser.de>
Tested-by: <daxcore@online.de>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The existing quirk for these devices (pci_get_dma_source()) doesn't really
solve the problem; re-implement it using the DMA alias iterator.  We'll
come back later and remove the existing quirk and dma_source interface.
Note that device ID 0xe822 is typically function 0 and 0xe230 has been
tested to not need the quirk and are therefore removed versus the
equivalent dma_source quirk.  If there exist in other configurations we can
re-add them.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=605888Tested-by: NPat Erley <pat-lkml@erley.org>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Some devices are broken and use a requester ID other than their physical
devfn.  Add a byte, using an existing gap in the pci_dev structure, to
store an alternate "alias" devfn.  A bit in the dev_flags tells us when
this is valid.  We then add the alias as one more step in the
pci_for_each_dma_alias() iterator.
Tested-by: NGeorge Spelvin <linux@horizon.com>
Tested-by: NPat Erley <pat-lkml@erley.org>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Convert the pci_dev_flags definitions from decimal constants to bit shifts.
We're only a few entries away from where using the decimal value becomes
cumbersome.  No functional change.
Tested-by: NGeorge Spelvin <linux@horizon.com>
Tested-by: NPat Erley <pat-lkml@erley.org>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

In a mixed PCI/PCI-X/PCIe topology, bridges can take ownership of
transactions, replacing the original requester ID with their own.
Sometimes we just want to know the resulting device or resulting alias;
other times we want each step in the chain.  This iterator allows either
usage.  When an endpoint is connected via an unbroken chain of PCIe
switches and root ports, it has no alias and its requester ID is visible to
the root bus.  When PCI/X get in the way, we pick up aliases for bridges.

The reason why we potentially care about each step in the path is because
of PCI-X.  PCI-X has the concept of a requester ID, but bridges may or may
not take ownership of various types of transactions.  We therefore leave it
to the consumer of this function to prune out what they don't care about
rather than attempt to flatten the alias ourselves.
Tested-by: NGeorge Spelvin <linux@horizon.com>
Tested-by: NPat Erley <pat-lkml@erley.org>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add device tree probing support to the 'pci-rcar-gen2' driver.

[Sergei: numerous fixes/cleanups/additions]
[bhelgaas: whitespace fix]
Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>

There is otherwise a risk of a null pointer dereference.

Found by cppcheck, a static code analysis program.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

This patch adds the bindings for the R-Car PCIe driver.  The driver resides
under drivers/pci/host/pcie-rcar.c
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NLucas Stach <l.stach@pengutronix.de>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>

Add MSI support to the R-Car PCIe driver.
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NLucas Stach <l.stach@pengutronix.de>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>

This PCIe Host driver currently does not support MSI, so cards fall back to
INTx interrupts.
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>

The PCI user-space config accessors pci_user_{read,write}_config_*() return
negative error numbers, which were introduced by commit 34e32072
("PCI: handle positive error codes").  That patch converted all positive
error numbers from platform-specific PCI config accessors to -EINVAL, which
means the callers don't know anything about the specific cause of the
failure.

The patch fixes the issue by converting the positive PCIBIOS_* error values
to generic negative error numbers with pcibios_err_to_errno().

[bhelgaas: changelog]
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NGreg Thelen <gthelen@google.com>

The site-specific OOM messages are unnecessary, because they duplicate the
MM subsystem generic OOM message.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

pcibios_penalize_isa_irq() is only implemented by x86 now, and legacy ISA
is not used by some architectures.  Make pcibios_penalize_isa_irq() a
__weak function to simplify the code.  This removes the need for new
platforms to add stub implementations of pcibios_penalize_isa_irq().

[bhelgaas: changelog, comments]
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

When a PCI-to-PCIe bridge is stacked on a PCIe-to-PCI bridge, we can have
PCIe endpoints masked by a conventional PCI bus.  This makes the extended
config space of the PCIe endpoint inaccessible.  The PCIe-to-PCI bridge is
supposed to handle any type 1 configuration transactions where the extended
config offset bits are non-zero as an Unsupported Request rather than
forward it to the secondary interface.  As noted here, there are a couple
known offenders to this rule.  These bridges drop the extended offset bits,
resulting in the conventional config space being aliased many times across
the extended config space.  For Intel NICs, this alias often seems to
expose a bogus SR-IOV cap.

Stacking bridges may seem like an uncommon scenario, but note that any
conventional PCI slot in a modern PC is already the secondary interface of
an onboard PCIe-to-PCI bridge.  The user need only add a PCI-to-PCIe
adapter and PCIe device to encounter this problem.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Use pci_is_bridge() to simplify code.  No functional change.

Requires: 326c1cda PCI: Rename pci_is_bridge() to pci_has_subordinate()
Requires: 1c86438c PCI: Add new pci_is_bridge() interface
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Use pci_is_bridge() to simplify code.  No functional change.

Requires: 326c1cda PCI: Rename pci_is_bridge() to pci_has_subordinate()
Requires: 1c86438c PCI: Add new pci_is_bridge() interface
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>