devices enable/disable are controled by dip-switch on bonito board.
If bonito core board is connected to base board,
you can check the settings from FPGA.
This patch adds basic code and controls SCIFA5 settings
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This adds basic bonito board (R-Mobile A1) support
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

R8A7740 GIC can not get external IRQx interrupt directly
without GIC - INTC demux support.

Current AG5 is using GIC - INTCS demux with
special irq relocation. but GIC - INTCA demux
is still not supported and it needs irq number re-mapping.

OTOH, normal INTC support as before is very enough for R8A7740,
because it is not SMP CPU.
This patch adds INTCA/INTCS support instead of GIC.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch adds I2C support to r8a7740 CPU
which has lasting errata on I2C I/O pad reset.
This patch is including work-around.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This adds PFC support for the R8A7740 (R-Mobile A1) CPU
This patch is based on v0.1 manual
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This adds preliminary support for the R8A7740 (R-Mobile A1) CPU

Timer, serial, gic, clock are supported at this point.
This patch is based on v0.1 manual
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The following commits break cpuidle on SH-Mobile ARM:

46bcfad7 cpuidle: Single/Global registration of idle states
e978aa7d cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state

This patch remedies these issues by up-porting the SH-Mobile
code to fit with the above introduced framework changes.

It is worth noting that the new code becomes significantly cleaner,
so these framework changes are very welcome. At the same time this
breakage could probably have been avoided by grepping for "last_state"
and "cpuidle_register_driver".
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch moves PORT_xx helper macro to sh_pfc.h,
and it expects CPU_ALL_PORT() macro for each CPU
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch move PORT_DATA_xx helper macro to sh_pfc.h.
and pfc-sh7372.c used it
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

it is not necessary to have sh7372_xxxx index on static variable
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch adds MMC data pin pull-up option for pfc-sh73a0.c,
and select it on ag5evm board.
The MMC read/write will be error without this patch.

Cc: Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Tested-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This reverts commit aa6afca5.

It escalates of some of the google-chrome SELinux problems with ptrace
("Check failed: pid_ > 0.  Did not find zygote process"), and Andrew
says that it is also causing mystery lockdep reports.
Reported-by: NAlex Villacís Lasso <a_villacis@palosanto.com>
Requested-by: NJames Morris <jmorris@namei.org>
Requested-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  drivers/media: video/a5k6aa is a module and so needs module.h
  mfd: fix build failures in recently added ab5500 code
  hwspinlock/u8500: include linux/module.h
  MTD: MAPS: bcm963xx-flash.c: explicitly include module.h

* 'for-linus' of git://neil.brown.name/md:
  md/raid5: STRIPE_ACTIVE has lock semantics, add barriers
  md/raid5: abort any pending parity operations when array fails.

* 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs: (45 commits)
  DocBook/drm: Clean up a todo-note
  DocBook/drm: `device aware' -> `device-aware'
  DocBook/drm: `(device|driver) specific' -> `(device|driver)-specific'
  DocBook/drm: Clean up the paragraph on framebuffer objects
  DocBook/drm: Use `; otherwise,'
  DocBook/drm: Better flow with `, and then'
  DocBook/drm: Refer to the domain-setting function as a device-specific ioctl
  DocBook/drm: Improve flow of GPU/CPU coherence sentence
  DocBook/drm: Use an <itemizelist> for fundamental GEM operations
  DocBook/drm: Insert a comma
  DocBook/drm: Use a <variablelist> for vblank ioctls
  DocBook/drm: Use an itemizedlist for what an encoder needs to provide
  DocBook/drm: Insert `the' for readability, and change `set' to `setting'
  DocBook/drm: Remove extraneous commas
  DocBook/drm: Use a colon
  DocBook/drm: Clarify `final initialization' via better formatting
  DocBook/drm: Remove redundancy
  DocBook/drm: Insert `it' for smooth reading
  DocBook/drm: The word `so-called'; I do not think it connotes what you think it connotes
  DocBook/drm: Use a singular subject for grammatical cleanliness
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: (21 commits)
  ktest: Evaluate variables entered on the command line
  ktest: Add variable ${PWD}
  ktest: Add another monitor flush before installing kernel
  ktest: Do not opencode reboot in grub setting
  ktest: Add processing of complex conditionals
  ktest: Fix parsing of config section lines
  ktest: Sort make_min_config configs by dependecies
  ktest: Add DEFINED keyword for IF statements
  ktest: Add OVERRIDE keyword to DEFAULTS section
  ktest: Consolidate TEST_TYPE and DEFAULT code
  ktest: Add INCLUDE keyword to include other config files
  ktest: Let IF keyword take comparisons
  ktest: Add IF and ELSE to config sections
  ktest: Do not reboot on config or build issues
  ktest: Add option REBOOT_SUCCESS_LINE to stop waiting after a reboot
  ktest: Add NO_INSTALL option to not install for a test
  ktest: Fail when grub menu not found
  ktest: Include monitor in reboot code
  ktest: Only need to save .config when doing mrproper
  ktest: Create outputdir if it does not exist
  ...

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / OPP: Use ERR_CAST instead of ERR_PTR(PTR_ERR())
  PM / devfreq: fix private_data
  Documentation: Fix typo in freezer-subsystem.txt
  PM / QoS: Set cpu_dma_pm_qos->name

Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...))

[The semantic patch that makes this change is available
 in scripts/coccinelle/api/err_cast.cocci.

 More information about semantic patching is available at
 http://coccinelle.lip6.fr/]
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock:
  hwspinlock/u8500: fix build error due to undefined label
  hwspinlock: Don't return a value in __hwspin_unlock

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Hook up process_vm_{readv,writev} syscalls.

The Kconfig loop detection goes crazy without this.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Otherwise we get compile errors like this:

  ERROR: "led_classdev_unregister" [drivers/platform/x86/dell-laptop.ko] undefined!
  ERROR: "led_classdev_register" [drivers/platform/x86/dell-laptop.ko] undefined!
  make[1]: *** [__modpost] Error 1
  make: *** [modules] Error 2

when the dell-laptop support is enabled without the necessary LED
support being enabled.
Reported-by: NAlessandro Suardi <alessandro.suardi@gmail.com>
Acked-by: NMatthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This file uses core functions like module_init() and module_exit()
and so it explicitly needs to include the module.h header.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Alek Du reported that the code erroneously applies time to jiffies
conversions twice to the t1 and t2 values. In normal use on a modem link
this cases no visible problem but on a slower link it will break as with
HZ=1000 as is typical we are running t1/t2 ten times too fast.

Alek's original patch removed the conversion from the timer setting but we
in fact have to be more careful as the contents of t1/t2 are visible via
the device API and we thus need to correct the constants.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix below build error:

  CC      drivers/hwspinlock/u8500_hsem.o
drivers/hwspinlock/u8500_hsem.c: In function 'u8500_hsem_probe':
drivers/hwspinlock/u8500_hsem.c:113: error: label 'free_state' used but not defined
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>

Fix below build warning:

  CC      arch/arm/mach-omap2/hwspinlock.o
In file included from arch/arm/mach-omap2/hwspinlock.c:22:
include/linux/hwspinlock.h: In function '__hwspin_unlock':
include/linux/hwspinlock.h:121: warning: 'return' with a value, in function returning void
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>

All updates that occur under STRIPE_ACTIVE should be globally visible
when STRIPE_ACTIVE clears.  test_and_set_bit() implies a barrier, but
clear_bit() does not.

This is suitable for 3.1-stable.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>
Cc: stable@kernel.org

When the number of failed devices exceeds the allowed number
we must abort any active parity operations (checks or updates) as they
are no longer meaningful, and can lead to a BUG_ON in
handle_parity_checks6.

This bug was introduce by commit 6c0069c0
in 2.6.29.
Reported-by: NManish Katiyar <mkatiyar@gmail.com>
Tested-by: NManish Katiyar <mkatiyar@gmail.com>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>
Cc: stable@kernel.org

These files had implicit dependencies on modular support
which now show up as build failures with the module cleanup
work merged to mainline.
Reported-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Include module.h to fix below build error:

  CC      drivers/hwspinlock/u8500_hsem.o
drivers/hwspinlock/u8500_hsem.c:177: error: 'THIS_MODULE' undeclared here (not in a function)
 [...]
drivers/hwspinlock/u8500_hsem.c:196: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
drivers/hwspinlock/u8500_hsem.c:196: warning: function declaration isn't a prototype
make[2]: *** [drivers/hwspinlock/u8500_hsem.o] Error 1
make[1]: *** [drivers/hwspinlock] Error 2
make: *** [drivers] Error 2
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

module.h was previously implicitly included through mtd/mtd.h.

Fixes the following build failure after the module.h cleanup:

  CC      drivers/mtd/maps/bcm963xx-flash.o
drivers/mtd/maps/bcm963xx-flash.c: In function 'bcm963xx_probe':
drivers/mtd/maps/bcm963xx-flash.c:208:29: error: 'THIS_MODULE' undeclared (first use in this function)
 [...]
drivers/mtd/maps/bcm963xx-flash.c:276:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
drivers/mtd/maps/bcm963xx-flash.c:276:15: warning: function declaration isn't a prototype
make[7]: *** [drivers/mtd/maps/bcm963xx-flash.o] Error 1
Signed-off-by: NJonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

.. with new name.  Because nothing says "really solid kernel release"
like naming it after an extinct animal that just happened to be in the
news lately.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits)
  ARM: OMAP: Fix export.h or module.h includes
  ARM: OMAP: omap_device: Include linux/export.h
  ARM: OMAP2: Fix H4 matrix keyboard warning
  ARM: OMAP1: Remove unused omap-alsa.h
  ARM: OMAP1: Fix warnings about enabling 32 KiHz timer
  ARM: OMAP2+: timer: Remove omap_device_pm_latency
  ARM: OMAP2+: clock data: Remove redundant timer clkdev
  ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio
  ARM: OMAP: usb: musb: OMAP: Delete unused function
  MAINTAINERS: Update linux-omap git repository
  ARM: OMAP: change get_context_loss_count ret value to int
  ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly
  ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF
  ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list
  ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success
  ARM: OMAP: dmtimer: Include linux/module.h
  ARM: OMAP2+: l3-noc: Include linux/module.h
  ARM: OMAP2+: devices: Fixes for McPDM
  ARM: OMAP: Fix errors and warnings when building for one board
  ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only
  ...

Mountpoint crossing is similar to following procfs symlinks - we do
not get ->d_revalidate() called for dentry we have arrived at, with
unpleasant consequences for NFS4.

Simple way to reproduce the problem in mainline:

    cat >/tmp/a.c <<'EOF'
    #include <unistd.h>
    #include <fcntl.h>
    #include <stdio.h>
    main()
    {
            struct flock fl = {.l_type = F_RDLCK, .l_whence = SEEK_SET, .l_len = 1};
            if (fcntl(0, F_SETLK, &fl))
                    perror("setlk");
    }
    EOF
    cc /tmp/a.c -o /tmp/test

then on nfs4:

    mount --bind file1 file2
    /tmp/test < file1		# ok
    /tmp/test < file2		# spews "setlk: No locks available"...

What happens is the missing call of ->d_revalidate() after mountpoint
crossing and that's where NFS4 would issue OPEN request to server.

The fix is simple - treat mountpoint crossing the same way we deal with
following procfs-style symlinks.  I.e.  set LOOKUP_JUMPED...

Cc: stable@kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The "private_date" field in struct devfreq_dev_status almost certainly
wants to be "private_data"; since there are no in-tree users of this
functionality, now seems like an easy time to make the fix.
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Fix a typo in Documentation/cgroups/freezer-subsystem.txt.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>

Since commit 4a31a334, the name of this misc device is not initialized,
which leads to a funny device named /dev/(null) being created and
/proc/misc containing an entry with just a number but no name. The latter
leads to complaints by cryptsetup, which caused me to investigate this
matter.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>