Pull power management fixes from Rafael Wysocki:
 "These address a corner case in the menu cpuidle governor and fix error
  handling in the PM core's generic clock management code.

  Specifics:

   - Make the menu cpuidle governor avoid stopping the scheduler tick if
     the predicted idle duration exceeds the tick period length, but the
     selected idle state is shallow and deeper idle states with high
     target residencies are available (Rafael Wysocki).

   - Make the PM core's generic clock management code use a proper data
     type for one variable to make error handling work (Dan Carpenter)"

* tag 'pm-4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: menu: Retain tick when shallow state is selected
  PM / clk: signedness bug in of_pm_clk_add_clks()

Merge a generic clock management fix for 4.19-rc2.

* pm-core:
  PM / clk: signedness bug in of_pm_clk_add_clks()

Pull block fixes from Jens Axboe:
 "Small collection of fixes that should go into this series. This pull
  contains:

   - NVMe pull request with three small fixes (via Christoph)

   - Kill useless NULL check before kmem_cache_destroy (Chengguang Xu)

   - Xen block driver pull request with persistent grant flushing fixes
     (Juergen Gross)

   - Final wbt fixes, wrapping up the changes for this series. These
     have been heavily tested (me)

   - cdrom info leak fix (Scott Bauer)

   - ATA dma quirk for SQ201 (Linus Walleij)

   - Straight forward bsg refcount_t conversion (John Pittman)"

* tag 'for-linus-20180830' of git://git.kernel.dk/linux-block:
  cdrom: Fix info leak/OOB read in cdrom_ioctl_drive_status
  nvmet: free workqueue object if module init fails
  nvme-fcloop: Fix dropped LS's to removed target port
  nvme-pci: add a memory barrier to nvme_dbbuf_update_and_check_event
  block: bsg: move atomic_t ref_count variable to refcount API
  block: remove unnecessary condition check
  ata: ftide010: Add a quirk for SQ201
  blk-wbt: remove dead code
  blk-wbt: improve waking of tasks
  blk-wbt: abstract out end IO completion handler
  xen/blkback: remove unused pers_gnts_lock from struct xen_blkif_ring
  xen/blkback: move persistent grants flags to bool
  xen/blkfront: reorder tests in xlblk_init()
  xen/blkfront: cleanup stale persistent grants
  xen/blkback: don't keep persistent grants too long

Pull mtd fixes from Boris Brezillon:
 "Raw NAND fixes:

   - denali: Fix a regression caused by the nand_scan() rework

   - docg4: Fix a build error when gcc decides to not iniline some
     functions (can be reproduced with gcc 4.1.2):

* tag 'mtd/for-4.19-rc2' of git://git.infradead.org/linux-mtd:
  mtd: rawnand: denali: do not pass zero maxchips to nand_scan()
  mtd: rawnand: docg4: Remove wrong __init annotations

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix unsupported parallel dispatch of requests

  MMC host:
   - atmel-mci/android-goldfish: Fixup logic of sg_copy_{from,to}_buffer
   - renesas_sdhi_internal_dmac: Prevent IRQ-storm due of DMAC IRQs
   - renesas_sdhi_internal_dmac: Fixup bad register offset"

* tag 'mmc-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: renesas_sdhi_internal_dmac: mask DMAC interrupts
  mmc: renesas_sdhi_internal_dmac: fix #define RST_RESERVED_BITS
  mmc: block: Fix unsupported parallel dispatch of requests
  mmc: android-goldfish: fix bad logic of sg_copy_{from,to}_buffer conversion
  mmc: atmel-mci: fix bad logic of sg_copy_{from,to}_buffer conversion

Merge tag 'riscv-for-linus-4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V fixes from Palmer Dabbelt:
 "RISC-V Fixes and Cleanups for 4.19-rc2

  This contains a handful of patches that filtered their way in during
  the merge window but just didn't make the deadline. It includes:

   - Additional documentation in the riscv,cpu-intc device tree binding
     that resulted from some feedback I missed in the original patch
     set.

   - A build fix that provides the definition of tlb_flush() before
     including tlb.h, which fixes a RISC-V build regression introduced
     during this merge window.

   - A cosmetic cleanup to sys_riscv_flush_icache()"

* tag 'riscv-for-linus-4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  RISC-V: Use a less ugly workaround for unused variable warnings
  riscv: tlb: Provide definition of tlb_flush() before including tlb.h
  dt-bindings: riscv,cpu-intc: Cleanups from a missed review

The newly added code that emits ksymtab entries as pairs of 32-bit
relative references interacts poorly with the way powerpc lays out its
address space: when a module exports a per-CPU variable, the primary
module region covering the ksymtab entry -and thus the 32-bit relative
reference- is too far away from the actual per-CPU variable's base
address (to which the per-CPU offsets are applied to obtain the
respective address of each CPU's copy), resulting in corruption when the
module loader attempts to resolve symbol references of modules that are
loaded on top and link to the exported per-CPU symbol.

So let's disable this feature on powerpc.  Even though it implements
CONFIG_RELOCATABLE, it does not implement CONFIG_RANDOMIZE_BASE and so
KASLR kernels (which are the main target of the feature) do not exist on
powerpc anyway.
Reported-by: NAndreas Schwab <schwab@linux-m68k.org>
Suggested-by: NNicholas Piggin <nicholas.piggin@gmail.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge tag 'hwmon-for-linus-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Fix potential Spectre v1 in nct6775

 - Add error checking to adt7475 driver

 - Fix reading shunt resistor value in ina2xx driver

* tag 'hwmon-for-linus-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (nct6775) Fix potential Spectre v1
  hwmon: (adt7475) Make adt7475_read_word() return errors
  hwmon: (adt7475) Potential error pointer dereferences
  hwmon: (ina2xx) fix sysfs shunt resistor read access

Pull misc fs fixes from Jan Kara:

 - make UDF to properly mount media created by Win7

 - make isofs to properly refuse devices with large physical block size

 - fix a Spectre gadget in quotactl(2)

 - fix a warning in fsnotify code hit by syzkaller

* tag 'for_v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Fix mounting of Win7 created UDF filesystems
  udf: Remove dead code from udf_find_fileset()
  fs/quota: Fix spectre gadget in do_quotactl
  fs/quota: Replace XQM_MAXQUOTAS usage with MAXQUOTAS
  isofs: reject hardware sector size > 2048 bytes
  fsnotify: fix false positive warning on inode delete

Pull nios2 fix from Ley Foon Tan:
 "remove duplicate DEBUG_STACK_USAGE symbol defintions"

* tag 'nios2-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: kconfig: remove duplicate DEBUG_STACK_USAGE symbol defintions

Pull crypto fixes from Herbert Xu:

 - Check for the right CPU feature bit in sm4-ce on arm64.

 - Fix scatterwalk WARN_ON in aes-gcm-ce on arm64.

 - Fix unaligned fault in aesni on x86.

 - Fix potential NULL pointer dereference on exit in chtls.

 - Fix DMA mapping direction for RSA in caam.

 - Fix error path return value for xts setkey in caam.

 - Fix address endianness when DMA unmapping in caam.

 - Fix sleep-in-atomic in vmx.

 - Fix command corruption when queue is full in cavium/nitrox.

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: cavium/nitrox - fix for command corruption in queue full case with backlog submissions.
  crypto: vmx - Fix sleep-in-atomic bugs
  crypto: arm64/aes-gcm-ce - fix scatterwalk API violation
  crypto: aesni - Use unaligned loads from gcm_context_data
  crypto: chtls - fix null dereference chtls_free_uld()
  crypto: arm64/sm4-ce - check for the right CPU feature bit
  crypto: caam - fix DMA mapping direction for RSA forms 2 & 3
  crypto: caam/qi - fix error path in xts setkey
  crypto: caam/jr - fix descriptor DMA unmapping

Pull NVMe fixes from Christoph.

* 'nvme-4.19' of git://git.infradead.org/nvme:
  nvmet: free workqueue object if module init fails
  nvme-fcloop: Fix dropped LS's to removed target port
  nvme-pci: add a memory barrier to nvme_dbbuf_update_and_check_event

Like d88b6d04: "cdrom: information leak in cdrom_ioctl_media_changed()"

There is another cast from unsigned long to int which causes
a bounds check to fail with specially crafted input. The value is
then used as an index in the slot array in cdrom_slot_status().
Signed-off-by: NScott Bauer <scott.bauer@intel.com>
Signed-off-by: NScott Bauer <sbauer@plzdonthack.me>
Cc: stable@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull thermal fixes from Eduardo Valentin:
 "Minor fixes to OF thermal, qoriq, and rcar drivers"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: of-thermal: disable passive polling when thermal zone is disabled
  thermal: rcar_gen3_thermal: convert to SPDX identifiers
  thermal: rcar_thermal: convert to SPDX identifiers
  thermal: qoriq: Switch to SPDX identifier
  thermal: qoriq: Simplify the 'site' variable assignment
  thermal: qoriq: Use devm_thermal_zone_of_sensor_register()

Thanks to Christoph Hellwig for pointing out a cleaner way to do this,
as my approach was quite ugly.

CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>

As of commit fd1102f0 ("mm: mmu_notifier fix for tlb_end_vma"),
asm-generic/tlb.h now calls tlb_flush() from a static inline function,
so we need to make sure that it's declared before #including the
asm-generic header in the arch header.
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Fixes: fd1102f0 ("mm: mmu_notifier fix for tlb_end_vma")
Signed-off-by: NWill Deacon <will.deacon@arm.com>
[groeck: Use forward declaration instead of moving inline function]
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>

I managed to miss one of Rob's code reviews on the mailing list
<http://lists.infradead.org/pipermail/linux-riscv/2018-August/001139.html>.
The patch has already been merged, so I'm submitting a fixup.

Sorry!

Fixes: b67bc7cb ("dt-bindings: interrupt-controller: RISC-V local interrupt controller")
Cc: Rob Herring <robh@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Karsten Merker <merker@debian.org>
Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>

Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

When a targetport is removed from the config, fcloop will avoid calling
the LS done() routine thinking the targetport is gone. This leaves the
initiator reset/reconnect hanging as it waits for a status on the
Create_Association LS for the reconnect.

Change the filter in the LS callback path. If tport null (set when
failed validation before "sending to remote port"), be sure to call
done. This was the main bug. But, continue the logic that only calls
done if tport was set but there is no remoteport (e.g. case where
remoteport has been removed, thus host doesn't expect a completion).
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

In many architectures loads may be reordered with older stores to
different locations.  In the nvme driver the following two operations
could be reordered:

 - Write shadow doorbell (dbbuf_db) into memory.
 - Read EventIdx (dbbuf_ei) from memory.

This can result in a potential race condition between driver and VM host
processing requests (if given virtual NVMe controller has a support for
shadow doorbell).  If that occurs, then the NVMe controller may decide to
wait for MMIO doorbell from guest operating system, and guest driver may
decide not to issue MMIO doorbell on any of subsequent commands.

This issue is purely timing-dependent one, so there is no easy way to
reproduce it. Currently the easiest known approach is to run "Oracle IO
Numbers" (orion) that is shipped with Oracle DB:

orion -run advanced -num_large 0 -size_small 8 -type rand -simulate \
	concat -write 40 -duration 120 -matrix row -testname nvme_test

Where nvme_test is a .lun file that contains a list of NVMe block
devices to run test against. Limiting number of vCPUs assigned to given
VM instance seems to increase chances for this bug to occur. On test
environment with VM that got 4 NVMe drives and 1 vCPU assigned the
virtual NVMe controller hang could be observed within 10-20 minutes.
That correspond to about 400-500k IO operations processed (or about
100GB of IO read/writes).

Orion tool was used as a validation and set to run in a loop for 36
hours (equivalent of pushing 550M IO operations). No issues were
observed. That suggest that the patch fixes the issue.

Fixes: f9f38e33 ("nvme: improve performance for virtual NVMe devices")
Signed-off-by: NMichal Wnukowski <wnukowski@google.com>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
[hch: updated changelog and comment a bit]
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Currently, variable ref_count within the bsg_device struct is of
type atomic_t.  For variables being used as reference counters,
the refcount API should be used instead of atomic.  The newer
refcount API works to prevent counter overflows and use-after-free
bugs.  So, move this varable from the atomic API to refcount,
potentially avoiding the issues mentioned.
Signed-off-by: NJohn Pittman <jpittman@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

kmem_cache_destroy() can handle NULL pointer correctly, so there is
no need to check e->icq_cache before calling kmem_cache_destroy().
Signed-off-by: NChengguang Xu <cgxu519@gmx.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The DMA is broken on this specific device for some unknown
reason (probably badly designed or plain broken interface
electronics) and will only work with PIO. Other users of
the same hardware does not have this problem.

Add a specific quirk so that this Gemini device gets
DMA turned off. Also fix up some code around passing the
port information around in probe while we're at it.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We already note and mark discard and swap IO from bio_to_wbt_flags().
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull networking fixes from David Miller:

 1) ICE, E1000, IGB, IXGBE, and I40E bug fixes from the Intel folks.

 2) Better fix for AB-BA deadlock in packet scheduler code, from Cong
    Wang.

 3) bpf sockmap fixes (zero sized key handling, etc.) from Daniel
    Borkmann.

 4) Send zero IPID in TCP resets and SYN-RECV state ACKs, to prevent
    attackers using it as a side-channel. From Eric Dumazet.

 5) Memory leak in mediatek bluetooth driver, from Gustavo A. R. Silva.

 6) Hook up rt->dst.input of ipv6 anycast routes properly, from Hangbin
    Liu.

 7) hns and hns3 bug fixes from Huazhong Tan.

 8) Fix RIF leak in mlxsw driver, from Ido Schimmel.

 9) iova range check fix in vhost, from Jason Wang.

10) Fix hang in do_tcp_sendpages() with tls, from John Fastabend.

11) More r8152 chips need to disable RX aggregation, from Kai-Heng Feng.

12) Memory exposure in TCA_U32_SEL handling, from Kees Cook.

13) TCP BBR congestion control fixes from Kevin Yang.

14) hv_netvsc, ignore non-PCI devices, from Stephen Hemminger.

15) qed driver fixes from Tomer Tayar.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits)
  net: sched: Fix memory exposure from short TCA_U32_SEL
  qed: fix spelling mistake "comparsion" -> "comparison"
  vhost: correctly check the iova range when waking virtqueue
  qlge: Fix netdev features configuration.
  net: macb: do not disable MDIO bus at open/close time
  Revert "net: stmmac: fix build failure due to missing COMMON_CLK dependency"
  net: macb: Fix regression breaking non-MDIO fixed-link PHYs
  mlxsw: spectrum_switchdev: Do not leak RIFs when removing bridge
  i40e: fix condition of WARN_ONCE for stat strings
  i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled
  ixgbe: fix driver behaviour after issuing VFLR
  ixgbe: Prevent unsupported configurations with XDP
  ixgbe: Replace GFP_ATOMIC with GFP_KERNEL
  igb: Replace mdelay() with msleep() in igb_integrated_phy_loopback()
  igb: Replace GFP_ATOMIC with GFP_KERNEL in igb_sw_init()
  igb: Use an advanced ctx descriptor for launchtime
  e1000: ensure to free old tx/rx rings in set_ringparam()
  e1000: check on netif_running() before calling e1000_up()
  ixgb: use dma_zalloc_coherent instead of allocator/memset
  ice: Trivial formatting fixes
  ...

Commit 49aa76b1 ("mtd: rawnand: do not execute nand_scan_ident()
if maxchips is zero") gave a new meaning for calling nand_scan_ident()
with maxchips=0.

It is a special usage for some drivers such as docg4, but actually
the Denali driver may pass maxchips=0 to nand_scan() when the driver
is enabled but no NAND chip is found on the board for some reasons.

If nand_scan_with_ids() is called with maxchips=0, nand_scan_ident()
is skipped, then nand_set_defaults() is skipped as well.  Thus, the
driver must set chip->controller beforehand.  Otherwise, nand_attach()
causes NULL pointer dereference.

In fact, the Denali controller knows the number of connected chips
before calling nand_scan_ident(); if DEVICE_RESET fails, there is no
chip in that chip select.  Then, denali_reset_banks() sets the maxchips
to the number of detected chips.  If no chip is found, maxchips is zero.

In this case, there is no point for calling nand_scan() because we know
it will fail for sure.  Let's make the probe function fail immediately.

Fixes: 49aa76b1 ("mtd: rawnand: do not execute nand_scan_ident() if maxchips is zero")
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Merge branch 'stable/for-jens-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus

Pull Xen block driver fixes from Konrad:

"Fix for flushing out persistent pages at a deterministic rate"

* 'stable/for-jens-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/blkback: remove unused pers_gnts_lock from struct xen_blkif_ring
  xen/blkback: move persistent grants flags to bool
  xen/blkfront: reorder tests in xlblk_init()
  xen/blkfront: cleanup stale persistent grants
  xen/blkback: don't keep persistent grants too long

We have two potential issues:

1) After commit 2887e41b, we only wake one process at the time when
   we finish an IO. We really want to wake up as many tasks as can
   queue IO. Before this commit, we woke up everyone, which could cause
   a thundering herd issue.

2) A task can potentially consume two wakeups, causing us to (in
   practice) miss a wakeup.

Fix both by providing our own wakeup function, which stops
__wake_up_common() from waking up more tasks if we fail to get a
queueing token. With the strict ordering we have on the wait list, this
wakes the right tasks and the right amount of tasks.

Based on a patch from Jianchao Wang <jianchao.w.wang@oracle.com>.
Tested-by: NAgarwal, Anchal <anchalag@amazon.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Prep patch for calling the handler from a different context,
no functional changes in this patch.
Tested-by: NAgarwal, Anchal <anchalag@amazon.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

pers_gnts_lock isn't being used anywhere. Remove it.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NRoger Pau Monné <roger.pau@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The struct persistent_gnt flags member is meant to be a bitfield of
different flags. There is only PERSISTENT_GNT_ACTIVE flag left, so
convert it to a bool named "active".
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NRoger Pau Monné <roger.pau@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

In case we don't want pv block devices we should not test parameters
for sanity and eventually print out error messages. So test precluding
conditions before checking parameters.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NRoger Pau Monné <roger.pau@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Add a periodic cleanup function to remove old persistent grants which
are no longer in use on the backend side. This avoids starvation in
case there are lots of persistent grants for a device which no longer
is involved in I/O business.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NRoger Pau Monné <roger.pau@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Persistent grants are allocated until a threshold per ring is being
reached. Those grants won't be freed until the ring is being destroyed
meaning there will be resources kept busy which might no longer be
used.

Instead of freeing only persistent grants until the threshold is
reached add a timestamp and remove all persistent grants not having
been in use for a minute.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NRoger Pau Monné <roger.pau@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The email was botched in one entry, and I also forgot to update the
location of the git tree. It'll be under the linux-block umbrella, just
with different branches.
Reported-by: NBaruch Siach <baruch@tkos.co.il>
Fixes: 7634ccd2 ("libata: maintainership update")
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If gcc (e.g. 4.1.2) decides not to inline init_mtd_structs() and
read_id_reg(), this will cause section mismatches, and crashes:

    WARNING: drivers/mtd/nand/raw/docg4.o(.text+0xc10): Section mismatch in reference from the function docg4_attach_chip() to the function .init.text:init_mtd_structs()
    The function docg4_attach_chip() references
    the function __init init_mtd_structs().
    This is often because docg4_attach_chip lacks a __init
    annotation or the annotation of init_mtd_structs is wrong.

    WARNING: drivers/mtd/nand/raw/docg4.o(.text+0xc3e): Section mismatch in reference from the function docg4_attach_chip() to the function .init.text:read_id_reg()
    The function docg4_attach_chip() references
    the function __init read_id_reg().
    This is often because docg4_attach_chip lacks a __init
    annotation or the annotation of read_id_reg is wrong.

Fix this by dropping the now incorrect __init annotations from
init_mtd_structs() and read_id_reg().

Fixes: 66a38478 ("mtd: rawnand: docg4: convert driver to nand_scan()")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

DEBUG_STACK_USAGE is already defined in lib/Kconfig.debug
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>

val can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

vers/hwmon/nct6775.c:2698 store_pwm_weight_temp_sel() warn: potential
spectre issue 'data->temp_src' [r]

Fix this by sanitizing val before using it to index data->temp_src

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

The adt7475_read_word() function was meant to return negative error
codes on failure.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NTokunori Ikegami <ikegami@allied-telesis.co.jp>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

The adt7475_update_device() function returns error pointers.  The
problem is that in show_pwmfreq() we dereference it before the check.
And then in pwm_use_point2_pwm_at_crit_show() there isn't a check at
all.  I don't know if it's required, but it silences a static checker
warning and it's doesn't hurt anything to check.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NTokunori Ikegami <ikegami@allied-telesis.co.jp>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>