In all of Samsung platform, the setup-i2c0.c file for I2C channel 0
is always compiled. So when supporting new SoC,it should be updated
for it. Since EXYNOS5 GPIO will be supported after this, there is no
setup gpio in there now. It will be implemented with that, of course.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds clock-exynos5.c for EXYNOS5250 now
and that can be used for other EXYNOS5 SoCs later.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Since exynos4_init_uarts() can be used for EXYNOS5 SoCs,
this patch changes the name of function to exynos_init_uarts().
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

According to commit cc511b8d ("ARM: 7257/1: EXYNOS: introduce
arch/arm/mach-exynos/common.[ch]"), we don't need to declare extern
for exynos4_map_io(), exynos4_init_clocks(), exynos4_init_uarts(),
and exynos_init(). And the exynos4210_register_clocks() and
exynos4212_register_clocks depend on each SoC not ARCH_EXYNOS4.
So this patch fixed above.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The framebuffer driver needs the clock named 'lcd' as its bus
clock but the equivalent clock on Exynos4 is named as 'fimd'.
Hence, create a clkdev lookup entry with the name 'lcd' that
references the 'fimd' clock.
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
[kgene.kim@samsung.com: rebased on top of latest samsung tree]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Amba core assumes the pclk to be named as apb_pclk. During device probe,
it tries to get that clock and enable that. When PM_RUNTIME is enabled,
dma clock is not explicitly enabled in pl330_probe, which causes device
probe to fail. Adding a clkdev entry for apb_pclk for mdma1 fixes the
problem.

This patch fixes following runtime error.

dma-pl330 dma-pl330.2: PERIPH_ID 0x0, PCELL_ID 0x0 !
dma-pl330: probe of dma-pl330.2 failed with error -22
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds MDMA platform data and enables
MDMA for DMA memcpy operation for EXYNOS SoCs.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

EXYNOS4212/4412 memory bus devfreq driver requires some register
addresses that were not defined with EXYNOS4210 support.
This patch adds the required register addresses and shift/mask data.
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NJaecheol Lee <jc.lee@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch changes prefix of the clk register from S5P_ to
EXYNOS4_ for new EXYNOS SoCs such as EXYNOS5 and adds prefix
exynos4_ on clk declarations.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch uses static declaration struct which is not
used in other file and re-arrange with group in header
file.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch changes the name of clock.c to clock-exynos4.c for other
EXYNOS series such as EXYNOS5. And since the header file of clock
is used only in arch/arm/mach-exynos, moves it in the local directory.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This commit brings exynos4-dt in line with recent changes to
mach-exynos tree, specifically:

 - Fixes build break related to replacing plat/exynos4.h with
   common.h in commit cc511b8d ("ARM: 7257/1: EXYNOS:
   introduce arch/arm/mach-exynos/common.[ch]")

 - Converts machine to use CONFIG_MULTI_IRQ_HANDLER as done for
   other machines in commit 4e44d2cb ("ARM: exynos4: convert
   to CONFIG_MULTI_IRQ_HANDLER")

 - Adds restart specifier as done for other machines in commit
   9eb48595 ("ARM: 7262/1: restart: EXYNOS: use new restart hook")
Signed-off-by: NKarol Lewandowski <k.lewandowsk@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

In order to keep the sensor's master clock frequency in valid range
when FIMC parent clock is xusbxti, the specified frequency must be
exactly 24MHZ, otherwise it's being set to too low value due to
rounding.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The real LCD resolution on Nuri is 1024x600, not 1280x800. This change
fixes the color distortion (green shadows) on half of the screen.
Also increase framebuffer virtual size for display panning support.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Fix the wrong function prototype.
Signed-off-by: NJonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Fixed following build warning with exynos4_defconfig.
arch/arm/mach-exynos/clock.c:33: warning: 'exynos4_clock_save' defined but not used
arch/arm/mach-exynos/clock-exynos4210.c:35: warning: 'exynos4210_clock_save' defined but not used
arch/arm/mach-exynos/clock-exynos4212.c:35: warning: 'exynos4212_clock_save' defined but not used
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch fixes the following build issue, which happens only if
SMP has been disabled:

arch/arm/mach-exynos/built-in.o: In function `exynos4_pm_resume':
arch/arm/mach-exynos/pm.c:387: undefined reference to `scu_enable'
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

It turns out that the logical CPU mapping is useful even when !CONFIG_SMP
for manipulation of devices like interrupt and power controllers when
running a UP kernel on a CPU other than 0. This can happen when kexecing
a UP image from an SMP kernel.

In the future, multi-cluster systems running AMP configurations will
require something similar for mapping cluster IDs, so it makes sense to
decouple this logic in preparation for this support.
Acked-by: NYang Bai <hamo.by@gmail.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Reported-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

When this is the only content remaining in mach/system.h then the
whole file is removed.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-and-tested-by: NJamie Iles <jamie@jamieiles.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NDavid Brown <davidb@codeaurora.org>
Acked-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

This is equivalent and more similar to existing architectures.
Signed-off-by: NNicolas Pitre <nico@linaro.org>

BSYM macro is only needed for assembly files and its usage in c files is
wrong, so remove it. The linker will correctly set bit 0 for Thumb2
kernels.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Cc: Dave Martin <dave.martin@linaro.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>

Framebuffer driver needs to fetch the video data during the rising
edge of the VCLK. Otherwise, there are some glitches in the LCD
display.
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

To support various EXYNOS series SoCs commonly,
added exynos common structure.
exynos-cpufreq.c => EXYNOS series common cpufreq driver
exynos4210-cpufreq.c => EXYNOS4210 support cpufreq driver
Signed-off-by: NJaecheol Lee <jc.lee@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NDave Jones <davej@redhat.com>

Remove the now empty arch_reset() from all the mach/system.h includes,
and remove its callsite.  Remove arm_machine_restart() as this function
no longer does anything useful.

For samsung platforms, remove the include of mach/system-reset.h and
plat/system-reset.h from their respective mach/system.h headers as these
just define their arch_reset functions.  As a result, the s3c2410 and
plat-samsung system-reset.h files are no longer referenced, so remove
these files entirely.
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NJamie Iles <jamie@jamieiles.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Hook these platforms restart code into the new restart hook rather
than using arch_reset().

[kgene.kim@samsung.com: according to local header, updated]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch introduces common.[ch] which are used only in the
arch/arm/mach-exynos/ directory. The common.c file merges
the cpu.c, init.c, irq-combiner.c and irq-eint.c files which
are used commonly on EXYNOS SoCs and the common.h file replaces
with plat/exynos4.h file.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

SROMC static memory mapping is included in the common s5p initialization
code. Hence, remove the duplicated SROMC static memory mapping for EXYNOS.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Cc: stable@kernel.org
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

As SPI platform devices are consolidated to plat-samsung, some
corresponding changes are required in the respective machine folder.
Setup files are added for SPI GPIO configurations and platform data
initialization.
Signed-off-by: NPadmavathi Venna <padma.v@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Signed-off-by: NAngus Ainslie <angus.ainslie@linaro.org>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

By using gpio_request_one it is possible to set the direction
and initial value in one shot. Thus, using gpio_request_one can
make the code simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add support for lookup of sdhci-s3c controller clocks using generic names
for s3c2416, s3c64xx, s5pc100, s5pv210 and exynos4 SoC's.
Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com>
[kgene.kim@samsung.com: fixed trailing whitespace]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The bus clocks previously sent through platform data to SDHCI controller
are removed.
Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add a new EXYNOS4 compatible device tree enabled board file. Boards
based on the EXYNOS4 family of SoC's can use this as the machine/board
file. When using this machine fike, a corresponding device tree blob
which describes the board's properties should be supplied at boot time
to the kernel.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>