- 05 3月, 2012 1 次提交
-
-
由 Magnus Damm 提交于
Fix pm_genpd_init() arguments and make sure dev_gpd_data() and simple_qos_governor exist regardless of CONFIG_PM_GENERIC_DOMAINS setting. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
- 10 2月, 2012 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
dev_gpd_data() is a generic macro, also useful for drivers. Hence it should be available also when CONFIG_PM_GENERIC_DOMAINS is not selected. OTOH, to_gpd_data() is so far unused outside of the generic PM domain code and does not seem to be very useful without CONFIG_PM_GENERIC_DOMAINS. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
- 02 2月, 2012 1 次提交
-
-
由 Rafael J. Wysocki 提交于
Merge branch 'v3.4-for-rafael' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into pm-domains * 'v3.4-for-rafael' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Hook up power domains to generic power domain infrastructure PM / Domains: Add OF support
-
- 30 1月, 2012 4 次提交
-
-
由 Rafael J. Wysocki 提交于
After the introduction of the late/early phases of device suspend/resume during system-wide power transitions it is possible to make the generic PM domains code execute its default late/early device suspend/resume callbacks during those phases instead of the corresponding _noirq phases. The _noirq device suspend/resume phases were only used for executing those callbacks, because this was the only way it could be done, but now we can do better. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Rafael J. Wysocki 提交于
Introduce generic subsystem callbacks for the new phases of device suspend/resume during system power transitions: "late suspend", "early resume", "late freeze", "early thaw", "late poweroff", "early restore". Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Rafael J. Wysocki 提交于
The current device suspend/resume phases during system-wide power transitions appear to be insufficient for some platforms that want to use the same callback routines for saving device states and related operations during runtime suspend/resume as well as during system suspend/resume. In principle, they could point their .suspend_noirq() and .resume_noirq() to the same callback routines as their .runtime_suspend() and .runtime_resume(), respectively, but at least some of them require device interrupts to be enabled while the code in those routines is running. It also makes sense to have device suspend-resume callbacks that will be executed with runtime PM disabled and with device interrupts enabled in case someone needs to run some special code in that context during system-wide power transitions. Apart from this, .suspend_noirq() and .resume_noirq() were introduced as a workaround for drivers using shared interrupts and failing to prevent their interrupt handlers from accessing suspended hardware. It appears to be better not to use them for other porposes, or we may have to deal with some serious confusion (which seems to be happening already). For the above reasons, introduce new device suspend/resume phases, "late suspend" and "early resume" (and analogously for hibernation) whose callback will be executed with runtime PM disabled and with device interrupts enabled and whose callback pointers generally may point to runtime suspend/resume routines. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Reviewed-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: NKevin Hilman <khilman@ti.com>
-
由 Rafael J. Wysocki 提交于
Commit 2aede851 PM / Hibernate: Freeze kernel threads after preallocating memory introduced a mechanism by which kernel threads were frozen after the preallocation of hibernate image memory to avoid problems with frozen kernel threads not responding to memory freeing requests. However, it overlooked the s2disk code path in which the SNAPSHOT_CREATE_IMAGE ioctl was run directly after SNAPSHOT_FREE, which caused freeze_workqueues_begin() to BUG(), because it saw that worqueues had been already frozen. Although in principle this issue might be addressed by removing the relevant BUG_ON() from freeze_workqueues_begin(), that would reintroduce the very problem that commit 2aede851 attempted to avoid into that particular code path. For this reason, to fix the issue at hand, introduce thaw_kernel_threads() and make the SNAPSHOT_FREE ioctl execute it. Special thanks to Srivatsa S. Bhat for detailed analysis of the problem. Reported-and-tested-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: stable@kernel.org
-
- 29 1月, 2012 7 次提交
-
-
由 Linus Torvalds 提交于
Merge tag 'driver-core-3.3-rc1-bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Here are some patches for the 3.3-rc1 tree. It contains the removal of the sysdev code, now that all users of it are gone, as well as some sysfs bugfixes that have been reported by users. There are also some documentation updates here as well. * tag 'driver-core-3.3-rc1-bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: Complain bitterly about attempts to remove files from nonexistent directories. stable: update documentation to ask for kernel version base/core.c:fix typo in comment in function device_add Documentation: devres: add allocation functions to list of supported calls Documentation update for the driver model core kernel-doc: fix new warnings in driver-core kernel-doc: fix new warnings in debugfs kernel-doc: fix new warnings in device.h driver core: remove drivers/base/sys.c and include/linux/sysdev.h
-
git://github.com/rustyrussell/linux由 Linus Torvalds 提交于
* tag 'for-linus' of git://github.com/rustyrussell/linux: lguest: remove reference from Documentation/virtual/00-INDEX virtio: correct the memory barrier in virtqueue_kick_prepare() virtio: fix typos of memory barriers
-
由 Linus Torvalds 提交于
Merge branch 'stable/for-linus-fixes-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/for-linus-fixes-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/granttable: Disable grant v2 for HVM domains. x86: xen: size struct xen_spinlock to always fit in arch_spinlock_t
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix reservations in btrfs_page_mkwrite Btrfs: advance window_start if we're using a bitmap btrfs: mask out gfp flags in releasepage Btrfs: fix enospc error caused by wrong checks of the chunk Btrfs: do not defrag a file partially Btrfs: fix warning for 32-bit build of fs/btrfs/check-integrity.c Btrfs: use cluster->window_start when allocating from a cluster bitmap Btrfs: Check for NULL page in extent_range_uptodate btrfs: Fix busyloops in transaction waiting code Btrfs: make sure a bitmap has enough bytes Btrfs: fix uninit warning in backref.c
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
* git://www.linux-watchdog.org/linux-watchdog: watchdog: iTCO_wdt: add Intel Lynx Point DeviceIDs watchdog: via_wdt: Set min_timeout and max_timeout for wdt_dev watchdog: Fix typo "unexpectdly" watchdog: wafer5823wdt: Fix handling WDIOS_DISABLECARD/WDIOS_ENABLECARD options watchdog: wm8350_wdt: Fix handling WDIOS_DISABLECARD/WDIOS_ENABLECARD options watchdog: Return proper error in nuc900wdt_probe if misc_register fails watchdog: Staticise nuc900_wdt watchdog: via_wdt: Staticise wdt_pci_table watchdog: omap_wdt.c: Fix the mismatch of pm_runtime enable and disable watchdog: dw_wdt.c: use devm_request_and_ioremap watchdog: imx2_wdt.c: use devm_request_and_ioremap
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm: (31 commits) ARM: 7304/1: ioremap: fix boundary check when reusing static mapping ARM: 7301/1: Rename the T() macro to TUSER() to avoid namespace conflicts ARM: 7299/1: ftrace: clear zero bit in reported IPs for Thumb-2 ARM: 7298/1: realview: fix mapping of MPCore private memory region PCMCIA: fix sa1111 oops on remove ARM: 7288/1: mach-sa1100: add missing module_init() call ARM: 7297/1: smp_twd: make sure timer is stopped before registering it ARM: 7296/1: proc-v7.S: remove HARVARD_CACHE preprocessor guards ARM: 7295/1: cortex-a7: move proc_info out of !CONFIG_ARM_LPAE block ARM: 7293/1: logical_cpu_map: decouple CPU mapping from SMP ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUs ARM: 7290/1: vmlinux.lds.S: align the exception fixup table to a 4-byte boundary ARM: 7289/1: vmlinux.lds.S: do not hardcode cacheline size as 32 bytes MFD: ucb1x00-ts: fix resume failure MFD: ucb1x00-core: fix gpiolib direction_output handling MFD: ucb1x00-core: fix missing restore of io output data on resume MFD: mcp-core: fix mcp_priv() to be more type safe MFD: mcp-core: fix complaints from the genirq layer Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus." Revert "ARM: sa1100: Refactor mcp-sa11x0 to use platform resources." ... Fix up conflict due to arch/arm/mach-mx5/Kconfig having been merged into mach-imx5 (commit 784a90c0: "ARM i.MX: Merge i.MX5 support into mach-imx"), but the ARM_L1_CACHE_SHIFT_6 entry was moved to be driven by the CPU_V7 logic from it in the old location in rmk's branch (commit a092f2b1: "ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUs").
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
arm-soc fixes for 3.3-rc: AT91 needed reset fixes which resulted in some minor code refactoring, it also adds a feature-removal for one of their platforms for 3.4. The USB patches have been acked by Greg K-H. i.MX and ux500 both have some minor fixes, nothing controversial. * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arch/arm/mach-imx/mach-mx53_ard.c: add missing iounmap ARM: imx: iomux-v1.h: Fix build error due to __init annotation ARM: at91: Fix at91sam9g45 and at91cap9 reset ARM: at91: make rstc soc independent ARM: at91: introduce AT91_SAM9_ALT_RESET to select the at91sam9 alternative reset ARM: at91: merge at91cap9_ddrsdr.h in at91sam9_ddrsdr.h ARM: at91: fix cap9 ddrsdr register ARM/USB: at91/ohci-at91: rename vbus_pin_inverted to vbus_pin_active_low USB: at91: fix clk_get error handling ARM: at91: removal of CAP9 SoC family ARM: at91: fix at91rm9200 soc subtype handling mach-ux500: no MMC_CAP_SD_HIGHSPEED on Snowball mach-ux500: enable ARM errata 764369 mach-ux500: do not override outer.inv_all mach-ux500: musb: now musb is always in OTG mode ARM: imx6: add missing twd_clk for imx6q clock
-
- 28 1月, 2012 6 次提交
-
-
由 Rusty Russell 提交于
We're in tools/lguest now. Reported-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Jason Wang 提交于
Use virtio_mb() to make sure the available index to be exposed before checking the the avail event. Otherwise we may get stale value of avail event in guest and never kick the host after. Note: this fixes a bug introduced by ee7cd898. Signed-off-by: NJason Wang <jasowang@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org
-
由 Jason Wang 提交于
Note: this fixes a bug introduced recently in 7b21e34f. Signed-off-by: NJason Wang <jasowang@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Pawel Moll 提交于
Since commit 576d2f25 "ARM: add generic ioremap optimization by reusing static mappings" ioremap() is trying to reuse existing static mapping when possible. The condition checking boundaries of the requested and existing mappings didn't take in-page offset into consideration though, which lead to obscure and hard to debug problems when requested mapping crossed end of the static one. Signed-off-by: NPawel Moll <pawel.moll@arm.com> Acked-by: NNicolas Pitre <nico@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Konrad Rzeszutek Wilk 提交于
As proper scaffolding for supporting error status is not yet implemented. BUG: unable to handle kernel NULL pointer dereference at 0000000000000400 IP: [<ffffffff81375ae9>] gnttab_end_foreign_access_ref_v2+0x29/0x40 PGD 32aa3067 PUD 32a87067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU 0 Modules linked in: sg sr_mod cdrom ata_generic ata_piix libata scsi_mod xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront cmd Pid: 2307, comm: ip Not tainted 3.3.0-rc1 #1 Xen HVM domU RIP: 0010:[<ffffffff81375ae9>] [<ffffffff81375ae9>] gnttab_end_foreign_access_ref_v2+0x29/0x40 RSP: 0018:ffff88003be03d38 EFLAGS: 00010206 RAX: 0000000000000000 RBX: ffff880033210640 RCX: 0000000000000040 RDX: 0000000000002000 RSI: 0000000000000000 RDI: 0000000000000200 RBP: ffff88003be03d38 R08: 0000000000000101 R09: 0000000000000000 R10: dead000000100100 R11: 0000000000000000 R12: ffff88003be03e48 R13: 0000000000000001 R14: ffff880039461c00 R15: 0000000000000200 FS: 00007fb1f84ec700(0000) GS:ffff88003be00000(0000) knlGS:0000000000000000 ... Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
* commit 'v3.3-rc1': (9775 commits) Linux 3.3-rc1 x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits qnx4: don't leak ->BitMap on late failure exits qnx4: reduce the insane nesting in qnx4_checkroot() qnx4: di_fname is an array, for crying out loud... KEYS: Permit key_serial() to be called with a const key pointer keys: fix user_defined key sparse messages ima: fix cred sparse warning uml: fix compile for x86-64 MPILIB: Add a missing ENOMEM check tpm: fix (ACPI S3) suspend regression nvme: fix merge error due to change of 'make_request_fn' fn type xen: using EXPORT_SYMBOL requires including export.h gpio: tps65910: Use correct offset for gpio initialization acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec intel_idle: Split up and provide per CPU initialization func ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2 tg3: Fix single-vector MSI-X code openvswitch: Fix multipart datapath dumps. ipv6: fix per device IP snmp counters ...
-
- 27 1月, 2012 20 次提交
-
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits) gma500: Fix suspend/resume functions drm/exynos: fixed pm feature for fimd module. MAINTAINERS: added maintainer entry for Exynos DRM Driver. drm/exynos: fixed build dependency for DRM_EXYNOS_FIMD drm/exynos: fix build dependency for DRM_EXYNOS_HDMI drm/exynos: use release_mem_region instead of release_resource agp: fix scratch page cleanup drm/i915: fixup forcewake spinlock fallout in drpc debugfs function drm/i915: debugfs: show semaphore registers also on gen7 drm/i915: allow userspace forcewake references also on gen7 drm/i915: Re-enable gen7 RC6 and GPU turbo after resume. drm/i915: Correct debugfs printout for RC1e. Revert "drm/i915: Work around gen7 BLT ring synchronization issues." drm/i915: rip out the HWSTAM missed irq workaround drm/i915: paper over missed irq issues with force wake voodoo drm/i915: Hold gt_lock across forcewake register reads drm/i915: Hold gt_lock during reset drm/i915: Move reset forcewake processing to gen6_do_reset drm/i915: protect force_wake_(get|put) with the gt_lock drm/i915: convert force_wake_get to func pointer in the gpu reset code ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix silent output on Haier W18 laptop ALSA: hda: set mute led polarity for laptops with buggy BIOS based on SSID ALSA: hda - Fix silent output on ASUS A6Rp ALSA: Fix memory leak on error in snd_compr_set_params() ALSA: ymfpci - Don't create invalid PCM & mixers when AC97 doesn't support
-
由 Chris Mason 提交于
Josef fixed btrfs_page_mkwrite to properly release reserved extents if there was an error. But if we fail to get a reservation and we fail to dirty the inode (for ENOSPC reasons), we'll end up trying to release a reservation we never had. This makes sure we only release if we were able to reserve. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Ryan Mallon 提交于
Both the suspend and resume functions incorrectly set psbfb = to_psb_fb(NULL) outside of the loop over all of the framebuffers. Fix this by moving the assignment of psbfb inside the loop and removing the initialisation of fb. Signed-off-by: NRyan Mallon <rmallon@gmail.com> Acked-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Seth Heasley 提交于
This patch adds the TCO Watchdog DeviceIDs for the Intel Lynx Point PCH. Signed-off-by: NSeth Heasley <seth.heasley@intel.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Axel Lin 提交于
Let the watchdog core to check the valid value range of min_timeout/max_timeout. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Masanari Iida 提交于
Correct typo "unexpectdly" to "unexpectedly" in pnx4008_wdt.c and stmp3xxx_wdt.c Signed-off-by: Masanari Iida<standby24x7@gmail.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Axel Lin 提交于
While receiving WDIOS_DISABLECARD option for WDIOC_SETOPTIONS command, call wafwdt_stop() to disable watchdog. Call wafwdt_start() while receiving WDIOS_ENABLECARD option. Current code has reverse behavior. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Axel Lin 提交于
While receiving WDIOS_DISABLECARD option for WDIOC_SETOPTIONS command, call wm8350_wdt_stop() to disable watchdog. Call wm8350_wdt_start() while receiving WDIOS_ENABLECARD option. Current code has reverse behavior. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Axel Lin 提交于
Return proper error instead of 0 if misc_register fails Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Axel Lin 提交于
It is only used in this driver, so no need to make the symbol global. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Axel Lin 提交于
It is only used in this driver, so no need to make the symbol global. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NMarc Vertes <marc.vertes@sigfox.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Shubhrajyoti D 提交于
Currently the watchdog driver calls the pm_runtime_enable and never the disable. This may cause a warning when pm_runtime_enable checks for the count match. Also fixes the error /build/watchdog # insmod omap_wdt.ko [ 44.999389] omap_wdt omap_wdt: Unbalanced pm_runtime_enable! [ 45.011047] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec /build/watchdog # Attempting to fix the same by calling pm_runtime_disable. Signed-off-by: NShubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Julia Lawall 提交于
Reimplement a call to devm_request_mem_region followed by a call to ioremap or ioremap_nocache by a call to devm_request_and_ioremap. The semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @nm@ expression myname; identifier i; @@ struct platform_driver i = { .driver = { .name = myname } }; @@ expression dev,res,size; expression nm.myname; @@ -if (!devm_request_mem_region(dev, res->start, size, - \(res->name\|dev_name(dev)\|myname\))) { - ... - return ...; -} ... when != res->start ( -devm_ioremap(dev,res->start,size) +devm_request_and_ioremap(dev,res) | -devm_ioremap_nocache(dev,res->start,size) +devm_request_and_ioremap(dev,res) ) ... when any when != res->start // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Julia Lawall 提交于
Reimplement a call to devm_request_mem_region followed by a call to ioremap or ioremap_nocache by a call to devm_request_and_ioremap. The variable res_size is then no longer needed. The semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @nm@ expression myname; identifier i; @@ struct platform_driver i = { .driver = { .name = myname } }; @@ expression dev,res,size; expression nm.myname; @@ -if (!devm_request_mem_region(dev, res->start, size, - \(res->name\|dev_name(dev)\|myname\))) { - ... - return ...; -} ... when != res->start ( -devm_ioremap(dev,res->start,size) +devm_request_and_ioremap(dev,res) | -devm_ioremap_nocache(dev,res->start,size) +devm_request_and_ioremap(dev,res) ) ... when any when != res->start // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Dave Airlie 提交于
Merge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung into drm-fixes * 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung: drm/exynos: fixed pm feature for fimd module. MAINTAINERS: added maintainer entry for Exynos DRM Driver. drm/exynos: fixed build dependency for DRM_EXYNOS_FIMD drm/exynos: fix build dependency for DRM_EXYNOS_HDMI drm/exynos: use release_mem_region instead of release_resource
-
git://git.pengutronix.de/git/imx/linux-2.6由 Olof Johansson 提交于
* 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: arch/arm/mach-imx/mach-mx53_ard.c: add missing iounmap ARM: imx: iomux-v1.h: Fix build error due to __init annotation
-
由 Olof Johansson 提交于
Merge branch 'fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes * 'fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: mach-ux500: no MMC_CAP_SD_HIGHSPEED on Snowball mach-ux500: enable ARM errata 764369 mach-ux500: do not override outer.inv_all mach-ux500: musb: now musb is always in OTG mode
-
git://git.linaro.org/people/shawnguo/linux-2.6由 Olof Johansson 提交于
* 'imx6/fixes' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx6: add missing twd_clk for imx6q clock
-
git://github.com/at91linux/linux-at91由 Olof Johansson 提交于
* 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91: Fix at91sam9g45 and at91cap9 reset ARM: at91: make rstc soc independent ARM: at91: introduce AT91_SAM9_ALT_RESET to select the at91sam9 alternative reset ARM: at91: merge at91cap9_ddrsdr.h in at91sam9_ddrsdr.h ARM: at91: fix cap9 ddrsdr register ARM/USB: at91/ohci-at91: rename vbus_pin_inverted to vbus_pin_active_low USB: at91: fix clk_get error handling ARM: at91: removal of CAP9 SoC family ARM: at91: fix at91rm9200 soc subtype handling
-