HDA Codec driver,HDA Intel driver
Merged the work of pshou <pshou@realtek.com.tw> for the support of
more models with ALC codecs: ALC880 ASUS, Uniwill, FSC1734, generic 6-stack,
and ALC260 HP.  Tests with the real hardwares are appreciated.

The codec patch is cleaned up:  The preset configuration of codecs are
stored in the table and copied to the spec instance.

Added/fixed comments.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Allow sub_device=0 in board config check.  This means that every device
with the given sub vendor ID will match.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Clean up and fix ALC-codec support code.

The last addition of bound volume is fixed now to handle correctly
the bound 'mute switches'.  The analog loopback should work better.
The init verbs are fixed together with this change.

The numbers are replaced with macros for better readability.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Feed front signals to all surround channels if no data is given
for surround channels.

It seems that CLFE works as expected (only center outputs) even if
connected from the front line - at least on my test system.
If this change causes problems on other system (e.g. only the left
channel is transferred to the center channel), please let me know...
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA generic driver
Print all AMP IN values when multiple nodes are connected.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Trident driver
Disable MPU401 support on SIS7018 since it results in kernel freeze.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Fix the analog loopback volumes of ALC codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Fix the PCM mixer switch for AD1986a (it was a typo).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Fixed the handling of amp cache in hda-codec driver.
The confliction of cache values with different indices should be fixed now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

VIA82xx driver
As the original reporter noted, the NO_VRA must be used for loud volumes.
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

CA0106 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

HDSPM driver,PCI drivers,RME9652 driver
Added RME Hammerfall DSP MADI driver by Winfried Ritsch.
(Moved from alsa-driver tree to mainline.)
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Intel8x0 driver
Added ac97_quirk for FSC T3010.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Intel driver
Fixed Oops in the error path from probe function of snd-hda-intel driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,Memalloc module,RME HDSP driver,RME9652 driver
Add the write support to snd-page-alloc proc file for buffer pre-allocation.
Removed the pre-allocation codes via module options.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Timer Midlevel,ALSA sequencer,ALSA<-OSS sequencer,Digigram VX core
I2C tea6330t,GUS Library,VIA82xx driver,VIA82xx-modem driver
CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,YMFPCI driver
Digigram VX Pocket driver,Common EMU synth,USB generic driver,USB USX2Y
Checking a pointer for NULL before calling kfree() on it is redundant,
kfree() deals with NULL pointers just fine.
This patch removes such checks from sound/

This patch also makes another, but closely related, change.
It avoids casting pointers about to be kfree()'ed.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Intel8x0 driver
To avoid confusion, the structure members vendor/device were renamed
to subvendor/subdevice, because we compare them with PCI subsystem vendor
and subsystem device.
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

AC97 Codec,ATIIXP driver,VIA82xx driver
To avoid confusion, the structure members vendor/device were renamed
to subvendor/subdevice, because we compare them with PCI subsystem vendor
and subsystem device.
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

VIA82xx driver
- 0x1071, 0x8399 == VIA_DXS_ENABLE
- Umax AB 595T (VIA K8N800A - VT8237)
- reporter: Honza Machacek <Hloupy.Honza@centrum.cz>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

ALI5451 driver
This patch adds modem support for ali5451. Since it is same pci device
all is done in ali5451.c.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

CA0106 driver
Use the DMA_32BIT_MASK constant from dma-mapping.h
when calling pci_set_dma_mask() or pci_set_consistent_dma_mask()
See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details
Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

ATIIXP-modem driver,Intel8x0-modem driver,VIA82xx-modem driver
Modem drivers (atiixp-modem, intel8x0m, via82xx-modem) migration
for using MC97 generic modem mixer for off-hook operation.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

AC97 Codec
Simple MC97 modem mixer with two common controls: Off-hook and CID,
and Si3056 MC specific control: Modem Speaker.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

CA0106 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

CA0106 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

CA0106 driver
Notes: This adds a new mixer item to switch between Mic and Line-in.
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

CA0106 driver
Notes: MIC capture not tested yet.
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

EMU10K1/EMU10K2 driver
Add details for the audigy player box version.
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,ICE1724 driver
Add the support of Chaintech AV-710 to ice1724 driver.
The patch includes the WM-codec initialization fix by
Jaanus Kivistik <jaanus@no.spam.ee>.

Since both AV-710 and AMP Audio2000 have the same SSID, initialize
WM codecs as default for both devices.  In case it breaks Audio2000,
you can pass 'model=amp2000' option to avoid WM codec initialization.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALS4000 driver
Fix kernel panic with als4000 when MPU401 is accessed.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

VIA82xx driver
Added dxs_support=4 for a Twinhead mobo.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
Fixed a wrong bit set in AD1985 surround jack controls.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Fixed the capture on some ALC880 devices.
The node 0x07 is sometimes invalid as an ADC.  Also, the intialization
of ADC nodes are fixed on some models.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Fixed the wrong array size of the codec pointer list.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,ICE1712 driver
Updated the documentation for ice1712 and ice1724 drivers.
Added the device description for shuttle SN25P missing in the last patch.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ICE1712 driver
Added the support for Shuttle SN25P.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ES1968 driver
Added the vendor id 0x1558 to the power management whitelist of es1968 driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

CA0106 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

[ALSA] When the alsamixer says 'SPDIF Out [Off]', SPDIF output should be off and Analog output should be on.

CA0106 driver
         This fixes a bug whereby when the snd-ca0106 module first loads,
         alsamixer says 'SPDIF Out [Off]' but no analog sound comes from the speakers.

         This covers any bug reports that said things like
         'mixer fails to remember analog output on, when the system is rebooted.'
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

CA0106 driver
Notes: Requires updated alsa-lib.
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>