Don't populate the read-only arrays prop2 and prop4 on the stack, instead
make them static const.  Makes the object code smaller by over 230 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  28235	   5820	    192	  34247	   85c7	drivers/pinctrl/pinctrl-single.o

After:
   text	   data	    bss	    dec	    hex	filename
  27839	   5980	    192	  34011	   84db	drivers/pinctrl/pinctrl-single.o
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use of_device_get_match_data() instead of of_match_device().
It allows us to remove the forward declaration of pcs_of_match.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Recent pinctrl changes to allow dynamic allocation of pins exposed one
more issue with the pinctrl pins claimed early by the controller itself.
This caused a regression for IMX6 pinctrl hogs.

Before enabling the pin controller driver we need to wait until it has
been properly initialized, then claim the hogs, and only then enable it.

To fix the regression, split the code into pinctrl_claim_hogs() and
pinctrl_enable(). And then let's require that pinctrl_enable() is always
called by the pin controller driver when ready after calling
pinctrl_register_and_init().

Depends-on: 950b0d91 ("pinctrl: core: Fix regression caused by delayed
work for hogs")
Fixes: df61b366af26 ("pinctrl: core: Use delayed work for hogs")
Fixes: e566fc11 ("pinctrl: imx: use generic pinctrl helpers for
managing groups")
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Tested-by: NGary Bisson <gary.bisson@boundarydevices.com>
Tested-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The current pinconf packed format allows only 16-bit argument limiting
the maximum value 65535. For most types this is enough. However,
debounce time can be in range of hundreths of milliseconds in case of
mechanical switches so we cannot represent the worst case using the
current format.

In order to support larger values change the packed format so that the
lower 8 bits are used as type which leaves 24 bits for the argument.
This allows representing values up to 16777215 and debounce times up to
16 seconds.

We also convert the existing users to use 32-bit integer when extracting
argument from the packed configuration value.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Commit df61b366af26 ("pinctrl: core: Use delayed work for hogs") caused a
regression at least with sh-pfc that is also a GPIO controller as
noted by Geert Uytterhoeven <geert@linux-m68k.org>.

As the original pinctrl_register() has issues calling pin controller
driver functions early before the controller has finished registering,
we can't just revert commit df61b366af26. That would break the drivers
using GENERIC_PINCTRL_GROUPS or GENERIC_PINMUX_FUNCTIONS.

So let's fix the issue with the following steps as a single patch:

1. Revert the late_init parts of commit df61b366af26.

   The late_init clearly won't work and we have to just give up
   on fixing pinctrl_register() for GENERIC_PINCTRL_GROUPS and
   GENERIC_PINMUX_FUNCTIONS.

2. Split pinctrl_register() into two parts

   By splitting pinctrl_register() into pinctrl_init_controller()
   and pinctrl_create_and_start() we have better control over when
   it's safe to call pinctrl_create().

3. Introduce a new pinctrl_register_and_init() function

   As suggested by Linus Walleij <linus.walleij@linaro.org>, we
   can just introduce a new function for the controllers that need
   pinctrl_create() called later.

4. Convert the four known problem cases to use new function

   Let's convert pinctrl-imx, pinctrl-single, sh-pfc and ti-iodelay
   to use the new function to fix the issues. The rest of the drivers
   can be converted later. Let's also update Documentation/pinctrl.txt
   accordingly because of the known issues with pinctrl_register().

Fixes: df61b366af26 ("pinctrl: core: Use delayed work for hogs")
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

We can now drop the driver specific code for managing functions.
Signed-off-by: NTony Lindgren <tony@atomide.com>
[Replaces GENERIC_PINMUX with GENERIC_PINMUX_FUNCTIONS]
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

We can now drop the driver specific code for managing groups.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Trivial fixe to spelling mistake "Ivalid" to "Invalid" in
dev_err  error message.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

We should return -ENOMEM instead of success if pcs_add_function() fails.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The pcs_parse_bits_in_pinctrl_entry function should search
for the "pinctrl-single,bits" and not "pinctrl-single,pins"
Signed-off-by: NAxel Haslam <ahaslam@baylibre.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

pinctrl_count_index_with_args returns -ENOENT not
-EINVAL. The return check would pass, and we would
try to kzalloc with a negative error size throwing
a warning.

Instead of checking for -EINVAL specifically, lets
check for any error and avoid negative size allocations.
Signed-off-by: NAxel Haslam <ahaslam@baylibre.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

We can now use generic parser and keep things compatible with the
old binding.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

We can now use generic parser. To support the legacy binding without
#pinctrl-cells, add pcs_quirk_missing_pinctrl_cells() and warn about
missing #pinctrl-cells.

Let's also update the documentation for struct pcs_soc_data while at it
as that seems to be out of date.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This is left over from initial experiments with more properties.
It's only used in one place, so let's just get rid of it to make
the code more readable.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

>From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Tue, 25 Oct 2016 08:33:34 -0700
Subject: [PATCHv2] pinctrl: single: Drop custom names

We no longer need to allocate custom names as those are dynamically
generated in pinctrl_register_one_pin() if no name is passed to
pinctrl_register_pins().
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

With many repeated suspend resume cycles, the pin specific wakeirq
may not always work on omaps. This is because the write to enable the
pin interrupt may not have reached the device over the interconnect
before suspend happens.

Let's fix the issue with a flush of posted write with a readback.

Cc: stable@vger.kernel.org
Reported-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

pcs_parse_bits_in_pinctrl_entry uses ffs which gives bit indices
ranging from 1 to MAX. This leads to a corner case where we try to request
the pin number = MAX and fails.

bit_pos value is being calculted using ffs. pin_num_from_lsb uses
bit_pos value. pins array is populated with:

pin + pin_num_from_lsb.

The above is 1 more than usual bit indices as bit_pos uses ffs to compute
first set bit. Hence the last of the pins array is populated with the MAX
value and not MAX - 1 which causes error when we call pin_request.

mask_pos is rightly calculated as ((pcs->fmask) << (bit_pos - 1))
Consequently val_pos and submask are correct.

Hence use __ffs which gives (ffs(x) - 1) as the first bit set.

fixes: 4e7e8017 ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules")
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The single pinmux controller can be cascaded to the other interrupt
controllers. Hence when propagating wake-up settings to its parent
interrupt controller, there's possiblity of detecting possible recursive
locking and getting lockdep warning.

This patch avoids this false positive by using a separate lockdep class
for this single pinctrl interrupts.

Cc: linux-gpio@vger.kernel.org
Suggested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>
Reviewed-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The pinctrl_unregister() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.

Remove the argument.

Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>

set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:

IRQF_VALID -> !IRQ_NOREQUEST
IRQF_PROBE -> !IRQ_NOPROBE
IRQF_NOAUTOEN -> IRQ_NOAUTOEN

For IRQs managed by an irqdomain, the irqdomain core code handles clearing
and setting IRQ_NOREQUEST already, so there is no need to do this in
.map() functions and we can simply remove the set_irq_flags calls. Some
users also modify IRQ_NOPROBE and this has been maintained although it
is not clear that is really needed. There appears to be a great deal of
blind copy and paste of this code.
Signed-off-by: NRob Herring <robh@kernel.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The PSC IRQ is requested using request_irq() API and as result it can
be forced to be threaded IRQ in RT-Kernel if PCS_QUIRK_HAS_SHARED_IRQ
is enabled for pinctrl domain.

As result, following 'possible irq lock inversion dependency' report
can be seen:
=========================================================
[ INFO: possible irq lock inversion dependency detected ]
3.14.43-rt42-00360-g96ff499-dirty #24 Not tainted
---------------------------------------------------------
irq/369-pinctrl/927 just changed the state of lock:
 (&pcs->lock){+.....}, at: [<c0375b54>] pcs_irq_handle+0x48/0x9c
but this lock was taken by another, HARDIRQ-safe lock in the past:
 (&irq_desc_lock_class){-.....}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&pcs->lock);
                               local_irq_disable();
                               lock(&irq_desc_lock_class);
                               lock(&pcs->lock);
  <Interrupt>
    lock(&irq_desc_lock_class);

 *** DEADLOCK ***

no locks held by irq/369-pinctrl/927.

the shortest dependencies between 2nd lock and 1st lock:
  -> (&irq_desc_lock_class){-.....} ops: 58724 {
     IN-HARDIRQ-W at:
                       [<c0090040>] lock_acquire+0x9c/0x158
                       [<c07065c8>] _raw_spin_lock+0x48/0x58
                       [<c009edac>] handle_fasteoi_irq+0x24/0x15c
                       [<c009abb0>] generic_handle_irq+0x3c/0x4c
                       [<c000f83c>] handle_IRQ+0x50/0xa0
                       [<c0008674>] gic_handle_irq+0x3c/0x6c
                       [<c0707a04>] __irq_svc+0x44/0x8c
                       [<c000fc44>] arch_cpu_idle+0x40/0x4c
                       [<c009aadc>] cpu_startup_entry+0x270/0x2e0
                       [<c06fcbf8>] rest_init+0xd4/0xe4
                       [<c0a44bfc>] start_kernel+0x3d0/0x3dc
                       [<80008084>] 0x80008084
     INITIAL USE at:
                      [<c0090040>] lock_acquire+0x9c/0x158
                      [<c070674c>] _raw_spin_lock_irqsave+0x54/0x68
                      [<c009aff8>] __irq_get_desc_lock+0x64/0xa4
                      [<c009e38c>] irq_set_chip+0x30/0x78
                      [<c009ec30>] irq_set_chip_and_handler_name+0x24/0x3c
                      [<c036ca10>] gic_irq_domain_map+0x48/0xb4
                      [<c00a0a80>] irq_domain_associate+0x84/0x1d4
                      [<c00a1154>] irq_create_mapping+0x80/0x11c
                      [<c00a1270>] irq_create_of_mapping+0x80/0x120
                      [<c05cdaa8>] irq_of_parse_and_map+0x34/0x3c
                      [<c0a4ea24>] omap_dm_timer_init_one+0x90/0x30c
                      [<c0a4eef0>] omap5_realtime_timer_init+0x8c/0x48c
                      [<c0a486b0>] time_init+0x28/0x38
                      [<c0a44a6c>] start_kernel+0x240/0x3dc
                      [<80008084>] 0x80008084
   }
   ... key      at: [<c1049ce0>] irq_desc_lock_class+0x0/0x8
   ... acquired at:
   [<c07065c8>] _raw_spin_lock+0x48/0x58
   [<c0375a90>] pcs_irq_unmask+0x58/0xa0
   [<c009ea48>] irq_enable+0x38/0x48
   [<c009ead0>] irq_startup+0x78/0x7c
   [<c009d440>] __setup_irq+0x4a8/0x4f4
   [<c009d5dc>] request_threaded_irq+0xb8/0x138
   [<c0415a5c>] omap_8250_startup+0x4c/0x148
   [<c041276c>] serial8250_startup+0x24/0x30
   [<c040d0ec>] uart_startup.part.9+0x5c/0x1b4
   [<c040dbcc>] uart_open+0xf4/0x16c
   [<c03f0540>] tty_open+0x170/0x61c
   [<c0157028>] chrdev_open+0xbc/0x1b4
   [<c0150494>] do_dentry_open+0x1e8/0x2bc
   [<c0150a84>] finish_open+0x44/0x5c
   [<c0160d50>] do_last.isra.47+0x710/0xca0
   [<c01613a4>] path_openat+0xc4/0x640
   [<c0162904>] do_filp_open+0x3c/0x98
   [<c0151bdc>] do_sys_open+0x114/0x1d8
   [<c0151cc8>] SyS_open+0x28/0x2c
   [<c0a44d70>] kernel_init_freeable+0x168/0x1e4
   [<c06fcc24>] kernel_init+0x1c/0xf8
   [<c000eee8>] ret_from_fork+0x14/0x20

-> (&pcs->lock){+.....} ops: 65 {
   HARDIRQ-ON-W at:
                    [<c0090040>] lock_acquire+0x9c/0x158
                    [<c07065c8>] _raw_spin_lock+0x48/0x58
                    [<c0375b54>] pcs_irq_handle+0x48/0x9c
                    [<c0375c5c>] pcs_irq_handler+0x1c/0x28
                    [<c009c458>] irq_forced_thread_fn+0x30/0x74
                    [<c009c784>] irq_thread+0x158/0x1c4
                    [<c0063fc4>] kthread+0xd4/0xe8
                    [<c000eee8>] ret_from_fork+0x14/0x20
   INITIAL USE at:
                   [<c0090040>] lock_acquire+0x9c/0x158
                   [<c070674c>] _raw_spin_lock_irqsave+0x54/0x68
                   [<c0375344>] pcs_enable+0x7c/0xe8
                   [<c0372a44>] pinmux_enable_setting+0x178/0x220
                   [<c036fecc>] pinctrl_select_state+0x110/0x194
                   [<c04732dc>] pinctrl_bind_pins+0x7c/0x108
                   [<c045853c>] driver_probe_device+0x70/0x254
                   [<c0458810>] __driver_attach+0x9c/0xa0
                   [<c045674c>] bus_for_each_dev+0x78/0xac
                   [<c0458030>] driver_attach+0x2c/0x30
                   [<c0457c78>] bus_add_driver+0x15c/0x204
                   [<c0458ee0>] driver_register+0x88/0x108
                   [<c045a168>] __platform_driver_register+0x64/0x6c
                   [<c0a8170c>] omap_hsmmc_driver_init+0x1c/0x20
                   [<c0008a94>] do_one_initcall+0x110/0x170
                   [<c0a44d48>] kernel_init_freeable+0x140/0x1e4
                   [<c06fcc24>] kernel_init+0x1c/0xf8
                   [<c000eee8>] ret_from_fork+0x14/0x20
 }
 ... key      at: [<c1088a8c>] __key.18572+0x0/0x8
 ... acquired at:
   [<c008cdd4>] mark_lock+0x388/0x76c
   [<c008df40>] __lock_acquire+0x6d0/0x1f98
   [<c0090040>] lock_acquire+0x9c/0x158
   [<c07065c8>] _raw_spin_lock+0x48/0x58
   [<c0375b54>] pcs_irq_handle+0x48/0x9c
   [<c0375c5c>] pcs_irq_handler+0x1c/0x28
   [<c009c458>] irq_forced_thread_fn+0x30/0x74
   [<c009c784>] irq_thread+0x158/0x1c4
   [<c0063fc4>] kthread+0xd4/0xe8
   [<c000eee8>] ret_from_fork+0x14/0x20

stack backtrace:
CPU: 1 PID: 927 Comm: irq/369-pinctrl Not tainted 3.14.43-rt42-00360-g96ff499-dirty #24
[<c00177e0>] (unwind_backtrace) from [<c00130b0>] (show_stack+0x20/0x24)
[<c00130b0>] (show_stack) from [<c0702958>] (dump_stack+0x84/0xd0)
[<c0702958>] (dump_stack) from [<c008bcfc>] (print_irq_inversion_bug+0x1d0/0x21c)
[<c008bcfc>] (print_irq_inversion_bug) from [<c008bf18>] (check_usage_backwards+0xb4/0x11c)
[<c008bf18>] (check_usage_backwards) from [<c008cdd4>] (mark_lock+0x388/0x76c)
[<c008cdd4>] (mark_lock) from [<c008df40>] (__lock_acquire+0x6d0/0x1f98)
[<c008df40>] (__lock_acquire) from [<c0090040>] (lock_acquire+0x9c/0x158)
[<c0090040>] (lock_acquire) from [<c07065c8>] (_raw_spin_lock+0x48/0x58)
[<c07065c8>] (_raw_spin_lock) from [<c0375b54>] (pcs_irq_handle+0x48/0x9c)
[<c0375b54>] (pcs_irq_handle) from [<c0375c5c>] (pcs_irq_handler+0x1c/0x28)
[<c0375c5c>] (pcs_irq_handler) from [<c009c458>] (irq_forced_thread_fn+0x30/0x74)
[<c009c458>] (irq_forced_thread_fn) from [<c009c784>] (irq_thread+0x158/0x1c4)
[<c009c784>] (irq_thread) from [<c0063fc4>] (kthread+0xd4/0xe8)
[<c0063fc4>] (kthread) from [<c000eee8>] (ret_from_fork+0x14/0x20)

To fix it use IRQF_NO_THREAD to ensure that pcs irq will not be forced threaded.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we
already have a pointer to corresponding irq_desc.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle.
Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org

On DRA7 there is one pinctrl domain (dra7_pmx_core) and
PRCM wake-up IRQ is not shared, so remove quirk.

Cc: Nishanth Menon <nm@ti.com>
Fixes: 31320bea ('pinctrl: single: Add DRA7 pinctrl compatibility')
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Acked-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Currently, pinctrl_register() just returns NULL on error, so the
callers can not know the exact reason of the failure.

Some of the pinctrl drivers return -EINVAL, some -ENODEV, and some
-ENOMEM on error of pinctrl_register(), although the error code
might be different from the real cause of the error.

This commit reworks pinctrl_register() to return the appropriate
error code and modifies all of the pinctrl drivers to use IS_ERR()
for the error checking and PTR_ERR() for getting the error code.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NPatrice Chotard <patrice.chotard@st.com>
Acked-by: NThierry Reding <treding@nvidia.com>
Acked-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: NLee Jones <lee@kernel.org>
Acked-by: NSören Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRay Jui <rjui@broadcom.com>
Acked-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: NHongzhou Yang <hongzhou.yang@mediatek.com>
Acked-by: NWei Chen <Wei.Chen@csr.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The irq_domain_ops are not modified by the driver and the irqdomain core
code accepts pointer to a const data.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: NPatrice Chotard <patrice.chotard@st.com>
Acked-by: NMaxime Coquelin <maxime.coquelin@st.com>
Acked-by: NHongzhou Yang <hongzhou.yang@mediatek.com>
Acked-by: NLee Jones <lee@kernel.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

A platform_driver does not need to set an owner, it will be populated by the
driver core.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

commit 03e9f0ca
"pinctrl: clean up after enable refactoring"
renamed the vtable callback .enable to .set_mux. The
renaming was done manually, and one of the alterations
contained a freudian slip. I confess, I am human.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

commit 2243a87d
"pinctrl: avoid duplicated calling enable_pinmux_setting for a pin"
removed the .disable callback from the struct pinmux_ops,
making the .enable() callback the only remaining callback.

However .enable() is a bad name as it seems to imply that a
muxing can also be disabled. Rename the callback to .set_mux()
and also take this opportunity to clean out any remaining
mentions of .disable() from the documentation.
Acked-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NBjorn Andersson <bjorn.andersson@sonymobile.com>
Acked-by: NFan Wu <fwu@marvell.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

AM437x pinctrl definitions now differ from traditional 16 bit OMAP pin
ctrl definitions, in that all 32 bits are used to describe a single pin

Also the location of wakeupenable and event bits have changed.
Signed-off-by: NKeerthy <j-keerthy@ti.com>
[nm@ti.com: minor updates]
Signed-off-by: NNishanth Menon <nm@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

DRA7 pinctrl definitions now differ from traditional 16 bit OMAP pin
ctrl definitions, in that all 32 bits are used to describe a single pin

Also the location of wakeupenable and event bits have changed.
Signed-off-by: NNishanth Menon <nm@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

%d in format string used, but the type is unsigned int

This was found using a static code analysis program called cppcheck
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Remove variable that are never used

This was found using a static code analysis program called cppcheck.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

What the patch does:
1. Call pinmux_disable_setting ahead of pinmux_enable_setting
  each time pinctrl_select_state is called
2. Remove the HW disable operation in pinmux_disable_setting function.
3. Remove the disable ops in struct pinmux_ops
4. Remove all the disable ops users in current code base.

Notes:
1. Great thanks for the suggestion from Linus, Tony Lindgren and
   Stephen Warren and Everyone that shared comments on this patch.
2. The patch also includes comment fixes from Stephen Warren.

The reason why we do this:
1. To avoid duplicated calling of the enable_setting operation
   without disabling operation inbetween which will let the pin
   descriptor desc->mux_usecount increase monotonously.
2. The HW pin disable operation is not useful for any of the
   existing platforms.
   And this can be used to avoid the HW glitch after using the
   item #1 modification.

In the following case, the issue can be reproduced:
1. There is a driver that need to switch pin state dynamically,
   e.g. between "sleep" and "default" state
2. The pin setting configuration in a DTS node may be like this:

  component a {
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&a_grp_setting &c_grp_setting>;
	pinctrl-1 = <&b_grp_setting &c_grp_setting>;
  }

  The "c_grp_setting" config node is totally identical, maybe like
  following one:

  c_grp_setting: c_grp_setting {
	pinctrl-single,pins = <GPIO48 AF6>;
  }

3. When switching the pin state in the following official pinctrl
   sequence:
	pin = pinctrl_get();
	state = pinctrl_lookup_state(wanted_state);
	pinctrl_select_state(state);
	pinctrl_put();

Test Result:
1. The switch is completed as expected, that is: the device's
   pin configuration is changed according to the description in the
   "wanted_state" group setting
2. The "desc->mux_usecount" of the corresponding pins in "c_group"
   is increased without being decreased, because the "desc" is for
   each physical pin while the setting is for each setting node
   in the DTS.
   Thus, if the "c_grp_setting" in pinctrl-0 is not disabled ahead
   of enabling "c_grp_setting" in pinctrl-1, the desc->mux_usecount
   will keep increasing without any chance to be decreased.

According to the comments in the original code, only the setting,
in old state but not in new state, will be "disabled" (calling
pinmux_disable_setting), which is correct logic but not intact. We
still need consider case that the setting is in both old state
and new state. We can do this in the following two ways:

1. Avoid to "enable"(calling pinmux_enable_setting) the "same pin
   setting" repeatedly
2. "Disable"(calling pinmux_disable_setting) the "same pin setting",
   actually two setting instances, ahead of enabling them.

Analysis:
1. The solution #2 is better because it can avoid too much
   iteration.
2. If we disable all of the settings in the old state and one of
   the setting(s) exist in the new state, the pins mux function
   change may happen when some SoC vendors defined the
   "pinctrl-single,function-off"
   in their DTS file.
   old_setting => disabled_setting => new_setting.
3. In the pinmux framework, when a pin state is switched, the
   setting in the old state should be marked as "disabled".

Conclusion:
1. To Remove the HW disabling operation to above the glitch mentioned
   above.
2. Handle the issue mentioned above by disabling all of the settings
   in old state and then enable the all of the settings in new state.
Signed-off-by: NFan Wu <fwu@marvell.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NPatrice Chotard <patrice.chotard@st.com>
Acked-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NMaxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Since we set up device wake-up interrupts as pinctrl-single
interrupts, we now must use the standard request_irq and
related functions to manage them.

If the pin interrupts are enabled for some pins at boot,
the wake-up events can show up as constantly pending
at least on omaps and will hang the system unless the related
device driver clears the event at the device.

To fix this, let's clear the interrupt flags during init,
and print out a warning so the board maintainers can update
their drivers to do proper request_irq for the driver specific
wake-up events.

Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

For some silicons, the pin configuration register can control
the output of the pin when the pad including the pin enter
low power mode.
For example, the pin can be "Drive 1", "Drive 0", "Float" when
the pad including the pin enter low power mode.
It is very useful when you want to control the power leakeage
when the SOC enter low power mode, and can save more power for
the low power mode.
Signed-off-by: NChao Xie <chao.xie@marvell.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

commit 4e7e8017 (pinctrl: pinctrl-single:
enhance to configure multiple pins of different modules) improved
support for pinctrl-single,bits option, but also caused a regression
in parsing badly configured mask data.

If the masks in DT data are not quite right,
pcs_parse_bits_in_pinctrl_entry() can end up in an infinite loop,
trashing memory at the same time.

Add a check to verify that each loop actually removes bits from the
'mask', so that the loop can eventually end.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

pcs_enable() uses vals->mask instead of pcs->fmask when bits_per_mux is
enabled. However, pcs_disable() always uses pcs->fmask.

Fix pcs_disable() to use vals->mask with bits_per_mux.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>