- 15 8月, 2017 8 次提交
-
-
由 Casey Leedom 提交于
cxgb4vf Ethernet driver now queries PCIe configuration space to determine if it can send TLPs to it with the Relaxed Ordering Attribute set, just like the pf did. Signed-off-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Reviewed-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Casey Leedom 提交于
cxgb4 Ethernet driver now queries PCIe configuration space to determine if it can send TLPs to it with the Relaxed Ordering Attribute set. Remove the enable_pcie_relaxed_ordering() to avoid enable PCIe Capability Device Control[Relaxed Ordering Enable] at probe routine, to make sure the driver will not send the Relaxed Ordering TLPs to the Root Complex which could not deal the Relaxed Ordering TLPs. Signed-off-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Reviewed-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Casey reported that the AMD ARM A1100 SoC has a bug in its PCIe Root Port where Upstream Transaction Layer Packets with the Relaxed Ordering Attribute clear are allowed to bypass earlier TLPs with Relaxed Ordering set, it would cause Data Corruption, so we need to disable Relaxed Ordering Attribute when Upstream TLPs to the Root Port. Reported-and-suggested-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Acked-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
According to the Intel spec section 3.9.1 said: 3.9.1 Optimizing PCIe Performance for Accesses Toward Coherent Memory and Toward MMIO Regions (P2P) In order to maximize performance for PCIe devices in the processors listed in Table 3-6 below, the soft- ware should determine whether the accesses are toward coherent memory (system memory) or toward MMIO regions (P2P access to other devices). If the access is toward MMIO region, then software can command HW to set the RO bit in the TLP header, as this would allow hardware to achieve maximum throughput for these types of accesses. For accesses toward coherent memory, software can command HW to clear the RO bit in the TLP header (no RO), as this would allow hardware to achieve maximum throughput for these types of accesses. Table 3-6. Intel Processor CPU RP Device IDs for Processors Optimizing PCIe Performance Processor CPU RP Device IDs Intel Xeon processors based on 6F01H-6F0EH Broadwell microarchitecture Intel Xeon processors based on 2F01H-2F0EH Haswell microarchitecture It means some Intel processors has performance issue when use the Relaxed Ordering Attribute, so disable Relaxed Ordering for these root port. Signed-off-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Acked-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NAshok Raj <ashok.raj@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
When bit4 is set in the PCIe Device Control register, it indicates whether the device is permitted to use relaxed ordering. On some platforms using relaxed ordering can have performance issues or due to erratum can cause data-corruption. In such cases devices must avoid using relaxed ordering. The patch adds a new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING to indicate that Relaxed Ordering (RO) attribute should not be used for Transaction Layer Packets (TLP) targeted towards these affected root complexes. This patch checks if there is any node in the hierarchy that indicates that using relaxed ordering is not safe. In such cases the patch turns off the relaxed ordering by clearing the capability for this device. Signed-off-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Acked-by: NAshok Raj <ashok.raj@intel.com> Acked-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
In the function msg_reverse(), we reverse the header while trying to reuse the original buffer whenever possible. Those rejected/returned messages are always transmitted as unicast, but the msg_non_seq field is not explicitly set to zero as it should be. We have seen cases where multicast senders set the message type to "NOT dest_droppable", meaning that a multicast message shorter than one MTU will be returned, e.g., during receive buffer overflow, by reusing the original buffer. This has the effect that even the 'msg_non_seq' field is inadvertently inherited by the rejected message, although it is now sent as a unicast message. This again leads the receiving unicast link endpoint to steer the packet toward the broadcast link receive function, where it is dropped. The affected unicast link is thereafter (after 100 failed retransmissions) declared 'stale' and reset. We fix this by unconditionally setting the 'msg_non_seq' flag to zero for all rejected/returned messages. Reported-by: NCanh Duc Luu <canh.d.luu@dektech.com.au> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
On L2 bearers, the TIPC broadcast function is sending out packets using the corresponding L2 broadcast address. At reception, we filter such packets under the assumption that they will also be delivered as broadcast packets. This assumption doesn't always hold true. Under high load, we have seen that a switch may convert the destination address and deliver the packet as a PACKET_MULTICAST, something leading to inadvertently dropped packets and a stale and reset broadcast link. We fix this by extending the reception filtering to accept packets of type PACKET_MULTICAST. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
"ip route get $daddr iif eth0 from $saddr" causes: BUG: KASAN: use-after-free in ip_route_input_rcu+0x1535/0x1b50 Call Trace: ip_route_input_rcu+0x1535/0x1b50 ip_route_input_noref+0xf9/0x190 tcp_v4_early_demux+0x1a4/0x2b0 ip_rcv+0xbcb/0xc05 __netif_receive_skb+0x9c/0xd0 netif_receive_skb_internal+0x5a8/0x890 Problem is that inet_rtm_getroute calls either ip_route_input_rcu (if an iif was provided) or ip_route_output_key_hash_rcu. But ip_route_input_rcu, unlike ip_route_output_key_hash_rcu, already associates the dst_entry with the skb. This clears the SKB_DST_NOREF bit (i.e. skb_dst_drop will release/free the entry while it should not). Thus only set the dst if we called ip_route_output_key_hash_rcu(). I tested this patch by running: while true;do ip r get 10.0.1.2;done > /dev/null & while true;do ip r get 10.0.1.2 iif eth0 from 10.0.1.1;done > /dev/null & ... and saw no crash or memory leak. Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: David Ahern <dsahern@gmail.com> Fixes: ba52d61e ("ipv4: route: restore skb_dst_set in inet_rtm_getroute") Signed-off-by: NFlorian Westphal <fw@strlen.de> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 8月, 2017 1 次提交
-
-
由 Andreas Born 提交于
bond_miimon_commit() handles the UP transition for each slave of a bond in the case of MII. It is triggered 10 times per second for the default MII Polling interval of 100ms. For device drivers that do not implement __ethtool_get_link_ksettings() the call to bond_update_speed_duplex() fails persistently while the MII status could remain UP. That is, in this and other cases where the speed/duplex update keeps failing over a longer period of time while the MII state is UP, a warning is printed every MII polling interval. To address these excessive warnings net_ratelimit() should be used. Printing a warning once would not be sufficient since the call to bond_update_speed_duplex() could recover to succeed and fail again later. In that case there would be no new indication what went wrong. Fixes: b5bf0f5b (bonding: correctly update link status during mii-commit phase) Signed-off-by: NAndreas Born <futur.andy@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 8月, 2017 10 次提交
-
-
由 Eric Dumazet 提交于
syzkaller got crashes with CONFIG_HARDENED_USERCOPY=y configs. Issue here is that recvfrom() can be used with user buffer of Z bytes, and SO_PEEK_OFF of X bytes, from a skb with Y bytes, and following condition : Z < X < Y kernel BUG at mm/usercopy.c:72! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 2917 Comm: syzkaller842281 Not tainted 4.13.0-rc3+ #16 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801d2fa40c0 task.stack: ffff8801d1fe8000 RIP: 0010:report_usercopy mm/usercopy.c:64 [inline] RIP: 0010:__check_object_size+0x3ad/0x500 mm/usercopy.c:264 RSP: 0018:ffff8801d1fef8a8 EFLAGS: 00010286 RAX: 0000000000000078 RBX: ffffffff847102c0 RCX: 0000000000000000 RDX: 0000000000000078 RSI: 1ffff1003a3fded5 RDI: ffffed003a3fdf09 RBP: ffff8801d1fef998 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801d1ea480e R13: fffffffffffffffa R14: ffffffff84710280 R15: dffffc0000000000 FS: 0000000001360880(0000) GS:ffff8801dc000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000202ecfe4 CR3: 00000001d1ff8000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: check_object_size include/linux/thread_info.h:108 [inline] check_copy_size include/linux/thread_info.h:139 [inline] copy_to_iter include/linux/uio.h:105 [inline] copy_linear_skb include/net/udp.h:371 [inline] udpv6_recvmsg+0x1040/0x1af0 net/ipv6/udp.c:395 inet_recvmsg+0x14c/0x5f0 net/ipv4/af_inet.c:793 sock_recvmsg_nosec net/socket.c:792 [inline] sock_recvmsg+0xc9/0x110 net/socket.c:799 SYSC_recvfrom+0x2d6/0x570 net/socket.c:1788 SyS_recvfrom+0x40/0x50 net/socket.c:1760 entry_SYSCALL_64_fastpath+0x1f/0xbe Fixes: b65ac446 ("udp: try to avoid 2 cache miss on dequeue") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Daniel Borkmann says: ==================== bpf: Minor fix in bpf_convert_ctx_access First one was found while trying to compile the kernel with !CONFIG_NET_RX_BUSY_POLL. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
When CONFIG_NET_SCHED or CONFIG_NET_RX_BUSY_POLL is /not/ set and we try a narrow __sk_buff load of tc_index or napi_id, respectively, then verifier rightfully complains that it's misconfigured, because we need to set target_size in each of the two cases. The rewrite for the ctx access is just a dummy op, but needs to pass, so fix this up. Fixes: f96da094 ("bpf: simplify narrower ctx access") Reported-by: NShubham Bansal <illusionist.neo@gmail.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
MIN_NAPI_ID is used in various places outside of CONFIG_NET_RX_BUSY_POLL wrapping, so when it's not set we run into build errors such as: net/core/dev.c: In function 'dev_get_by_napi_id': net/core/dev.c:886:16: error: ‘MIN_NAPI_ID’ undeclared (first use in this function) if (napi_id < MIN_NAPI_ID) ^~~~~~~~~~~ Thus, have MIN_NAPI_ID always defined to fix these errors. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anton Vasilyev 提交于
If mISDN_FsmNew() fails to allocate memory for jumpmatrix then null pointer dereference will occur on any write to jumpmatrix. The patch adds check on successful allocation and corresponding error handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: NAnton Vasilyev <vasilyev@ispras.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
The Flower app may receive a request to update the MTU of a representor netdev upon receipt of a control message from the firmware. This requires the RTNL lock which needs to be taken outside of the packet processing path. As a handling of this correctly seems a little to invasive for a fix simply skip setting the MTU for now. Relevant backtrace: [ 1496.288489] BUG: scheduling while atomic: kworker/0:3/373/0x00000100 [ 1496.294911] dca syscopyarea sysfillrect sysimgblt fb_sys_fops ptp drm mxm_wmi ahci pps_core libahci i2c_algo_bit wmi [last unloaded: nfp] [ 1496.294918] CPU: 0 PID: 373 Comm: kworker/0:3 Tainted: G OE 4.13.0-rc3+ #3 [ 1496.294919] Hardware name: Supermicro X10DRi/X10DRi, BIOS 2.0 12/28/2015 [ 1496.294923] Workqueue: events work_for_cpu_fn [ 1496.294924] Call Trace: [ 1496.294927] <IRQ> [ 1496.294931] dump_stack+0x63/0x82 [ 1496.294935] __schedule_bug+0x54/0x70 [ 1496.294937] __schedule+0x62f/0x890 [ 1496.294941] ? intel_unmap_sg+0x90/0x90 [ 1496.294942] schedule+0x36/0x80 [ 1496.294943] schedule_preempt_disabled+0xe/0x10 [ 1496.294945] __mutex_lock.isra.2+0x445/0x4a0 [ 1496.294947] ? device_is_rmrr_locked+0x12/0x50 [ 1496.294950] ? kfree+0x162/0x170 [ 1496.294952] ? device_is_rmrr_locked+0x12/0x50 [ 1496.294953] ? iommu_should_identity_map+0x50/0xe0 [ 1496.294954] __mutex_lock_slowpath+0x13/0x20 [ 1496.294955] ? iommu_no_mapping+0x48/0xd0 [ 1496.294956] ? __mutex_lock_slowpath+0x13/0x20 [ 1496.294957] mutex_lock+0x2f/0x40 [ 1496.294960] rtnl_lock+0x15/0x20 [ 1496.294979] nfp_flower_cmsg_rx+0xc8/0x150 [nfp] [ 1496.294986] nfp_ctrl_poll+0x286/0x350 [nfp] [ 1496.294989] tasklet_action+0xf6/0x110 [ 1496.294992] __do_softirq+0xed/0x278 [ 1496.294993] irq_exit+0xb6/0xc0 [ 1496.294994] do_IRQ+0x4f/0xd0 [ 1496.294996] common_interrupt+0x89/0x89 Fixes: 948faa46 ("nfp: add support for control messages for flower app") Signed-off-by: NSimon Horman <simon.horman@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Romain Perier 提交于
Currently, the function stmmac_mdio_register() is only used by stmmac_dvr_probe() from stmmac_main.c, in order to register the MDIO bus and probe information about the PHY. As this function is called before calling register_netdev(), all messages logged from stmmac_mdio_register are prefixed by "(unnamed net_device)". The goal of netdev_info or netdev_err is to dump useful infos about a net_device, when this data structure is partially initialized, there is no point for using these functions. This commit fixes the issue by replacing all netdev_*() by the corresponding dev_*() function for logging. The last netdev_info is replaced by phy_attached_info(), as a valid phydev can be used at this point. Signed-off-by: NRomain Perier <romain.perier@collabora.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Konstantin Khlebnikov 提交于
Without this filters cannot be attached. Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 6529eaba ("net: sched: introduce tcf block infractructure") Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Born 提交于
The patch c4adfc82 ("bonding: make speed, duplex setting consistent with link state") puts the link state to down if bond_update_speed_duplex() cannot retrieve speed and duplex settings. Assumably the patch was written with 802.3ad mode in mind which relies on link speed/duplex settings. For other modes like active-backup these settings are not required. Thus, only for these other modes, this patch reintroduces support for slaves that do not support reporting speed or duplex such as wireless devices. This fixes the regression reported in bug 196547 (https://bugzilla.kernel.org/show_bug.cgi?id=196547). Fixes: c4adfc82 ("bonding: make speed, duplex setting consistent with link state") Signed-off-by: NAndreas Born <futur.andy@googlemail.com> Acked-by: NMahesh Bandewar <maheshb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
The DSA layer frees the original skb when an xmit function returns NULL, meaning an error occurred. But if the tagging code copied the original skb, it is responsible of freeing the copy if an error occurs. The ksz tagging code currently has two issues: if skb_put_padto fails, the skb copy is not freed, and the original skb will be freed twice. To fix that, move skb_put_padto inside both branches of the skb_tailroom condition, before freeing the original skb, and free the copy on error. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NWoojung Huh <woojung.huh@microchip.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 8月, 2017 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix handling of initial STATE message in TIPC, from Jon Paul Maloy. 2) Fix stats handling in bcm_sysport_get_stats(), from Florian Fainelli. 3) Reject 16777215 VNI value in geneve_validate(), from Girish Moodalbail. 4) Fix initial IGMP sysctl setting regression, from Nikolay Borisov. 5) Once a UFO fragmented frame is treated as UFO, we should continue doing so. Likewise once a frame has been segmented, we should continue doing that and not try to convert it to a UFO frame. From Willem de Bruijn. 6) Test the AF_PACKET RX/TX ring pg_vec state under the socket lock to prevent races. From Willem de Bruijn. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: packet: fix tp_reserve race in packet_set_ring udp: consistently apply ufo or fragmentation net: sched: set xt_tgchk_param par.nft_compat as 0 in ipt_init_target igmp: Fix regression caused by igmp sysctl namespace code. geneve: maximum value of VNI cannot be used net: systemport: Fix software statistics for SYSTEMPORT Lite tipc: remove premature ESTABLISH FSM event at link synchronization
-
由 Willem de Bruijn 提交于
Updates to tp_reserve can race with reads of the field in packet_set_ring. Avoid this by holding the socket lock during updates in setsockopt PACKET_RESERVE. This bug was discovered by syzkaller. Fixes: 8913336a ("packet: add PACKET_RESERVE sockopt") Reported-by: NAndrey Konovalov <andreyknvl@google.com> Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
When iteratively building a UDP datagram with MSG_MORE and that datagram exceeds MTU, consistently choose UFO or fragmentation. Once skb_is_gso, always apply ufo. Conversely, once a datagram is split across multiple skbs, do not consider ufo. Sendpage already maintains the first invariant, only add the second. IPv6 does not have a sendpage implementation to modify. A gso skb must have a partial checksum, do not follow sk_no_check_tx in udp_send_skb. Found by syzkaller. Fixes: e89e9cf5 ("[IPv4/IPv6]: UFO Scatter-gather approach") Reported-by: NAndrey Konovalov <andreyknvl@google.com> Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc updates from David Miller: 1) Recognize M8 cpus, just basic chip ID matching, from Allen Pais. 2) Prevent crashes when bringing up sunvdc virtual block devices in some environments. From Jim Quigley. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain sparc64: Increase max_phys_bits to 51 and VA bits to 53 for M8. sparc64: recognize and support sparc M8 cpu type sparc64: properly name the cpu constants
-
- 10 8月, 2017 12 次提交
-
-
由 Xin Long 提交于
Commit 55917a21 ("netfilter: x_tables: add context to know if extension runs from nft_compat") introduced a member nft_compat to xt_tgchk_param structure. But it didn't set it's value for ipt_init_target. With unexpected value in par.nft_compat, it may return unexpected result in some target's checkentry. This patch is to set all it's fields as 0 and only initialize the non-zero fields in ipt_init_target. v1->v2: As Wang Cong's suggestion, fix it by setting all it's fields as 0 and only initializing the non-zero fields. Fixes: 55917a21 ("netfilter: x_tables: add context to know if extension runs from nft_compat") Suggested-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Commit dcd87999 ("igmp: net: Move igmp namespace init to correct file") moved the igmp sysctls initialization from tcp_sk_init to igmp_net_init. This function is only called as part of per-namespace initialization, only if CONFIG_IP_MULTICAST is defined, otherwise igmp_mc_init() call in ip_init is compiled out, casuing the igmp pernet ops to not be registerd and those sysctl being left initialized with 0. However, there are certain functions, such as ip_mc_join_group which are always compiled and make use of some of those sysctls. Let's do a partial revert of the aforementioned commit and move the sysctl initialization into inet_init_net, that way they will always have sane values. Fixes: dcd87999 ("igmp: net: Move igmp namespace init to correct file") Link: https://bugzilla.kernel.org/show_bug.cgi?id=196595Reported-by: NGerardo Exequiel Pozzi <vmlinuz386@gmail.com> Signed-off-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Girish Moodalbail 提交于
Geneve's Virtual Network Identifier (VNI) is 24 bit long, so the range of values for it would be from 0 to 16777215 (2^24 -1). However, one cannot create a geneve device with VNI set to 16777215. This patch fixes this issue. Signed-off-by: NGirish Moodalbail <girish.moodalbail@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
With SYSTEMPORT Lite we have holes in our statistics layout that make us skip over the hardware MIB counters, bcm_sysport_get_stats() was not taking that into account resulting in reporting 0 for all SW-maintained statistics, fix this by skipping accordingly. Fixes: 44a4524c ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
When a link between two nodes come up, both endpoints will initially send out a STATE message to the peer, to increase the probability that the peer endpoint also is up when the first traffic message arrives. Thereafter, if the establishing link is the second link between two nodes, this first "traffic" message is a TUNNEL_PROTOCOL/SYNCH message, helping the peer to perform initial synchronization between the two links. However, the initial STATE message may be lost, in which case the SYNCH message will be the first one arriving at the peer. This should also work, as the SYNCH message itself will be used to take up the link endpoint before initializing synchronization. Unfortunately the code for this case is broken. Currently, the link is brought up through a tipc_link_fsm_evt(ESTABLISHED) when a SYNCH arrives, whereupon __tipc_node_link_up() is called to distribute the link slots and take the link into traffic. But, __tipc_node_link_up() is itself starting with a test for whether the link is up, and if true, returns without action. Clearly, the tipc_link_fsm_evt(ESTABLISHED) call is unnecessary, since tipc_node_link_up() is itself issuing such an event, but also harmful, since it inhibits tipc_node_link_up() to perform the test of its tasks, and the link endpoint in question hence is never taken into traffic. This problem has been exposed when we set up dual links between pre- and post-4.4 kernels, because the former ones don't send out the initial STATE message described above. We fix this by removing the unnecessary event call. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jim Quigley 提交于
Using mpgroup to define multiple paths for a virtual disk causes multiple virtual-device-port ports to be created for that virtual device. Each virtual-device-port port then gets a vdisk created for it by the Linux sunvdc driver. As mpgroup is not supported by the Linux sunvdc driver it cannot handle multiple ports for a single vdisk, leading to a kernel panic at startup. This fix prevents more than one vdisk per virtual-device-port being created until full virtual disk multipathing (mpgroup) support is implemented. Signed-off-by: NJim Quigley <Jim.Quigley@oracle.com> Reviewed-by: NLiam Merwick <liam.merwick@oracle.com> Reviewed-by: NShannon Nelson <shannon.nelson@oracle.com> Reviewed-by: NAlexandre Chartre <alexandre.chartre@oracle.com> Reviewed-by: NAaron Young <aaron.young@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pin control fixes from Linus Walleij: "These are the pin control fixes I have gathered since the return from my vacation. They boiled in -next a while so let's get them in. Apart from the documentation build it is purely driver fixes. Which is nice. The Intel fixes seem kind of important. - Fix the documentation build as the docs were moved - Correct the UART pin list on the Intel Merrifield - Fix pin assignment and number of pins on the Marvell Armada 37xx pin controller - Cover the Setzer models in the Chromebook DMI quirk in the Intel cheryview driver so they start working - Add the missing "sim" function to the sunxi driver - Fix USB pin definitions on Uniphier Pro4 - Smatch fix for invalid reference in the zx pin control driver" * tag 'pinctrl-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: generic: update references to Documentation/pinctrl.txt pinctrl: intel: merrifield: Correct UART pin lists pinctrl: armada-37xx: Fix number of pin in south bridge pinctrl: armada-37xx: Fix the pin 23 on south bridge pinctrl: cherryview: Add Setzer models to the Chromebook DMI quirk pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver pinctrl: uniphier: fix USB3 pin assignment for Pro4 pinctrl: zte: fix dereference of 'data' in zx_set_mux()
-
由 Mel Gorman 提交于
Commit 65d8fc77 ("futex: Remove requirement for lock_page() in get_futex_key()") removed an unnecessary lock_page() with the side-effect that page->mapping needed to be treated very carefully. Two defensive warnings were added in case any assumption was missed and the first warning assumed a correct application would not alter a mapping backing a futex key. Since merging, it has not triggered for any unexpected case but Mark Rutland reported the following bug triggering due to the first warning. kernel BUG at kernel/futex.c:679! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 3695 Comm: syz-executor1 Not tainted 4.13.0-rc3-00020-g307fec773ba3 #3 Hardware name: linux,dummy-virt (DT) task: ffff80001e271780 task.stack: ffff000010908000 PC is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679 LR is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679 pc : [<ffff00000821ac14>] lr : [<ffff00000821ac14>] pstate: 80000145 The fact that it's a bug instead of a warning was due to an unrelated arm64 problem, but the warning itself triggered because the underlying mapping changed. This is an application issue but from a kernel perspective it's a recoverable situation and the warning is unnecessary so this patch removes the warning. The warning may potentially be triggered with the following test program from Mark although it may be necessary to adjust NR_FUTEX_THREADS to be a value smaller than the number of CPUs in the system. #include <linux/futex.h> #include <pthread.h> #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <sys/syscall.h> #include <sys/time.h> #include <unistd.h> #define NR_FUTEX_THREADS 16 pthread_t threads[NR_FUTEX_THREADS]; void *mem; #define MEM_PROT (PROT_READ | PROT_WRITE) #define MEM_SIZE 65536 static int futex_wrapper(int *uaddr, int op, int val, const struct timespec *timeout, int *uaddr2, int val3) { syscall(SYS_futex, uaddr, op, val, timeout, uaddr2, val3); } void *poll_futex(void *unused) { for (;;) { futex_wrapper(mem, FUTEX_CMP_REQUEUE_PI, 1, NULL, mem + 4, 1); } } int main(int argc, char *argv[]) { int i; mem = mmap(NULL, MEM_SIZE, MEM_PROT, MAP_SHARED | MAP_ANONYMOUS, -1, 0); printf("Mapping @ %p\n", mem); printf("Creating futex threads...\n"); for (i = 0; i < NR_FUTEX_THREADS; i++) pthread_create(&threads[i], NULL, poll_futex, NULL); printf("Flipping mapping...\n"); for (;;) { mmap(mem, MEM_SIZE, MEM_PROT, MAP_FIXED | MAP_SHARED | MAP_ANONYMOUS, -1, 0); } return 0; } Reported-and-tested-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NMel Gorman <mgorman@suse.de> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org # 4.7+ Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "The main thing is to allow empty id_tables for ACPI to make some drivers get probed again. It looks a bit bigger than usual because it needs some internal renaming, too. Other than that, there is a fix for broken DSTDs, a super simple enablement for ARM MPS, and two documentation fixes which I'd like to see in v4.13 already" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: rephrase explanation of I2C_CLASS_DEPRECATED i2c: allow i2c-versatile for ARM MPS platforms i2c: designware: Some broken DSTDs use 1MiHz instead of 1MHz i2c: designware: Print clock freq on invalid clock freq error i2c: core: Allow empty id_table in ACPI case as well i2c: mux: pinctrl: mention correct module name in Kconfig help text
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "Three patches that should go into this release. Two of them are from Paolo and fix up some corner cases with BFQ, and the last patch is from Ming and fixes up a potential usage count imbalance regression due to the recent NOWAIT work" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: don't leak preempt counter/q_usage_counter when allocating rq failed block, bfq: consider also in_service_entity to state whether an entity is active block, bfq: reset in_service_entity if it becomes idle
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: "Fix two regressions in the inside-secure driver with respect to hmac(sha1)" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: inside-secure - fix the sha state length in hmac_sha1_setkey crypto: inside-secure - fix invalidation check in hmac_sha1_setkey
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "The pull requests are getting smaller, that's progress I suppose :-) 1) Fix infinite loop in CIPSO option parsing, from Yujuan Qi. 2) Fix remote checksum handling in VXLAN and GUE tunneling drivers, from Koichiro Den. 3) Missing u64_stats_init() calls in several drivers, from Florian Fainelli. 4) TCP can set the congestion window to an invalid ssthresh value after congestion window reductions, from Yuchung Cheng. 5) Fix BPF jit branch generation on s390, from Daniel Borkmann. 6) Correct MIPS ebpf JIT merge, from David Daney. 7) Correct byte order test in BPF test_verifier.c, from Daniel Borkmann. 8) Fix various crashes and leaks in ASIX driver, from Dean Jenkins. 9) Handle SCTP checksums properly in mlx4 driver, from Davide Caratti. 10) We can potentially enter tcp_connect() with a cached route already, due to fastopen, so we have to explicitly invalidate it. 11) skb_warn_bad_offload() can bark in legitimate situations, fix from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) net: avoid skb_warn_bad_offload false positives on UFO qmi_wwan: fix NULL deref on disconnect ppp: fix xmit recursion detection on ppp channels rds: Reintroduce statistics counting tcp: fastopen: tcp_connect() must refresh the route net: sched: set xt_tgchk_param par.net properly in ipt_init_target net: dsa: mediatek: add adjust link support for user ports net/mlx4_en: don't set CHECKSUM_COMPLETE on SCTP packets qed: Fix a memory allocation failure test in 'qed_mcp_cmd_init()' hysdn: fix to a race condition in put_log_buffer s390/qeth: fix L3 next-hop in xmit qeth hdr asix: Fix small memory leak in ax88772_unbind() asix: Ensure asix_rx_fixup_info members are all reset asix: Add rx->ax_skb = NULL after usbnet_skb_return() bpf: fix selftest/bpf/test_pkt_md_access on s390x netvsc: fix race on sub channel creation bpf: fix byte order test in test_verifier xgene: Always get clk source, but ignore if it's missing for SGMII ports MIPS: Add missing file for eBPF JIT. bpf, s390: fix build for libbpf and selftest suite ...
-
- 09 8月, 2017 5 次提交
-
-
由 Willem de Bruijn 提交于
skb_warn_bad_offload triggers a warning when an skb enters the GSO stack at __skb_gso_segment that does not have CHECKSUM_PARTIAL checksum offload set. Commit b2504a5d ("net: reduce skb_warn_bad_offload() noise") observed that SKB_GSO_DODGY producers can trigger the check and that passing those packets through the GSO handlers will fix it up. But, the software UFO handler will set ip_summed to CHECKSUM_NONE. When __skb_gso_segment is called from the receive path, this triggers the warning again. Make UFO set CHECKSUM_UNNECESSARY instead of CHECKSUM_NONE. On Tx these two are equivalent. On Rx, this better matches the skb state (checksum computed), as CHECKSUM_NONE here means no checksum computed. See also this thread for context: http://patchwork.ozlabs.org/patch/799015/ Fixes: b2504a5d ("net: reduce skb_warn_bad_offload() noise") Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjørn Mork 提交于
qmi_wwan_disconnect is called twice when disconnecting devices with separate control and data interfaces. The first invocation will set the interface data to NULL for both interfaces to flag that the disconnect has been handled. But the matching NULL check was left out when qmi_wwan_disconnect was added, resulting in this oops: usb 2-1.4: USB disconnect, device number 4 qmi_wwan 2-1.4:1.6 wwp0s29u1u4i6: unregister 'qmi_wwan' usb-0000:00:1d.0-1.4, WWAN/QMI device BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0 IP: qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan] PGD 0 P4D 0 Oops: 0000 [#1] SMP Modules linked in: <stripped irrelevant module list> CPU: 2 PID: 33 Comm: kworker/2:1 Tainted: G E 4.12.3-nr44-normandy-r1500619820+ #1 Hardware name: LENOVO 4291LR7/4291LR7, BIOS CBET4000 4.6-810-g50522254fb 07/21/2017 Workqueue: usb_hub_wq hub_event [usbcore] task: ffff8c882b716040 task.stack: ffffb8e800d84000 RIP: 0010:qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan] RSP: 0018:ffffb8e800d87b38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8c8824f3f1d0 RDI: ffff8c8824ef6400 RBP: ffff8c8824ef6400 R08: 0000000000000000 R09: 0000000000000000 R10: ffffb8e800d87780 R11: 0000000000000011 R12: ffffffffc07ea0e8 R13: ffff8c8824e2e000 R14: ffff8c8824e2e098 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8c8835300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000e0 CR3: 0000000229ca5000 CR4: 00000000000406e0 Call Trace: ? usb_unbind_interface+0x71/0x270 [usbcore] ? device_release_driver_internal+0x154/0x210 ? qmi_wwan_unbind+0x6d/0xc0 [qmi_wwan] ? usbnet_disconnect+0x6c/0xf0 [usbnet] ? qmi_wwan_disconnect+0x87/0xc0 [qmi_wwan] ? usb_unbind_interface+0x71/0x270 [usbcore] ? device_release_driver_internal+0x154/0x210 Reported-and-tested-by: NNathaniel Roach <nroach44@gmail.com> Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guillaume Nault 提交于
Commit e5dadc65 ("ppp: Fix false xmit recursion detect with two ppp devices") dropped the xmit_recursion counter incrementation in ppp_channel_push() and relied on ppp_xmit_process() for this task. But __ppp_channel_push() can also send packets directly (using the .start_xmit() channel callback), in which case the xmit_recursion counter isn't incremented anymore. If such packets get routed back to the parent ppp unit, ppp_xmit_process() won't notice the recursion and will call ppp_channel_push() on the same channel, effectively creating the deadlock situation that the xmit_recursion mechanism was supposed to prevent. This patch re-introduces the xmit_recursion counter incrementation in ppp_channel_push(). Since the xmit_recursion variable is now part of the parent ppp unit, incrementation is skipped if the channel doesn't have any. This is fine because only packets routed through the parent unit may enter the channel recursively. Finally, we have to ensure that pch->ppp is not going to be modified while executing ppp_channel_push(). Instead of taking this lock only while calling ppp_xmit_process(), we now have to hold it for the full ppp_channel_push() execution. This respects the ppp locks ordering which requires locking ->upl before ->downl. Fixes: e5dadc65 ("ppp: Fix false xmit recursion detect with two ppp devices") Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Håkon Bugge 提交于
In commit 7e3f2952 ("rds: don't let RDS shutdown a connection while senders are present"), refilling the receive queue was removed from rds_ib_recv(), along with the increment of s_ib_rx_refill_from_thread. Commit 73ce4317 ("RDS: make sure we post recv buffers") re-introduces filling the receive queue from rds_ib_recv(), but does not add the statistics counter. rds_ib_recv() was later renamed to rds_ib_recv_path(). This commit reintroduces the statistics counting of s_ib_rx_refill_from_thread and s_ib_rx_refill_from_cq. Signed-off-by: NHåkon Bugge <haakon.bugge@oracle.com> Reviewed-by: NKnut Omang <knut.omang@oracle.com> Reviewed-by: NWei Lin Guay <wei.lin.guay@oracle.com> Reviewed-by: NShamir Rabinovitch <shamir.rabinovitch@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
With new TCP_FASTOPEN_CONNECT socket option, there is a possibility to call tcp_connect() while socket sk_dst_cache is either NULL or invalid. +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 4 +0 fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 setsockopt(4, SOL_TCP, TCP_FASTOPEN_CONNECT, [1], 4) = 0 +0 connect(4, ..., ...) = 0 << sk->sk_dst_cache becomes obsolete, or even set to NULL >> +1 sendto(4, ..., 1000, MSG_FASTOPEN, ..., ...) = 1000 We need to refresh the route otherwise bad things can happen, especially when syzkaller is running on the host :/ Fixes: 19f6d3f3 ("net/tcp-fastopen: Add new API support") Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: NWei Wang <weiwan@google.com> Acked-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-