- 23 8月, 2011 23 次提交
-
-
由 Jason Baron 提交于
Previously, netif_dbg() was using dynamic_dev_dbg() to perform the underlying printk. Fix it to use __netdev_printk(), instead. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jason Baron 提交于
Previously, if dynamic debug was enabled netdev_dbg() was using dynamic_dev_dbg() to print out the underlying msg. Fix this by making sure netdev_dbg() uses __netdev_printk(). Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jason Baron 提交于
Add a maintainers entry for dynamic debug. Hopefully nobody will object to me as maintainer... Signed-off-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jason Baron 提交于
Remove no longer used dynamic debug control variables. The definitions were removed a while ago, but we forgot to clean up the extern references. Signed-off-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Joe Perches 提交于
Add pr_fmt(fmt) with __func__. Converts "ddebug:" prefix to "dynamic_debug:". Most likely the if (verbose) outputs could also be converted from pr_info to pr_debug. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Joe Perches 提交于
Multiple printks with KERN_CONT can be interleaved by other printks. Reduce the likelihood of that interleaving by consolidating multiple calls to printk. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Joe Perches 提交于
Adding dynamic_dev_dbg duplicated prefix output. Consolidate that output to a single routine. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Joe Perches 提交于
Unlike dynamic_pr_debug, dynamic uses of dev_dbg can not currently add task_pid/KBUILD_MODNAME/__func__/__LINE__ to selected debug output. Add a new function similar to dynamic_pr_debug to optionally emit these prefixes. Cc: Aloisio Almeida <aloisio.almeida@openbossa.org> Noticed-by: NAloisio Almeida <aloisio.almeida@openbossa.org> Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andy Shevchenko 提交于
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tomoya MORINAGA 提交于
Only ML7213/ML7223(Bus-n) has this register. Currently,this driver doesn't care register "FUNCSEL" in suspend/resume. This patch saves/restores FUNCSEL register only when the device is ML7213 or ML7223(Bus-n). Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
If id_entry is available then it is used. However if we remove first the driver followed by the device, then the id_entry is pointing to driver's memory which is long gone. Since id->name and plat->name are equal there is no point in distinguishing them. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: linux-kernel@vger.kernel.org Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Wanlong Gao 提交于
Remove the __devinitconst to fix the section mismatch. WARNING: drivers/uio/built-in.o(.data+0x2e8): Section mismatch in reference from the variable uio_pdrv_genirq to the variable .devinit.rodata:uio_of_genirq_match The variable uio_pdrv_genirq references the variable __devinitconst uio_of_genirq_match If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Wanlong Gao 提交于
Remove one *goto* label in uio.c. Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: N"Hans J. Koch" <hjk@hansjkoch.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Hans J. Koch 提交于
The spin_lock in uio_pci_generic.c is only used in the interrupt handler, which cannot be executed twice at the same time. That makes the lock rather pointless. This patch removes it. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Anthony Foiani <anthony.foiani@gmail.com> Reported-by: NAnthony Foiani <anthony.foiani@gmail.com> Reported-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NHans J. Koch <hjk@hansjkoch.de> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mikulas Patocka 提交于
sysfs: use rb-tree for inode number lookup This patch makes sysfs use red-black tree for inode number lookup. Together with a previous patch to use red-black tree for name lookup, this patch makes all sysfs lookups to have O(log n) complexity. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mikulas Patocka 提交于
sysfs: remove s_sibling hacks s_sibling was used for three different purposes: 1) as a linked list of entries in the directory 2) as a linked list of entries to be deleted 3) as a pointer to "struct completion" This patch removes the hack and introduces new union u which holds pointers for cases 2) and 3). This change is needed for the following patch that removes s_sibling at all and replaces it with a rb tree. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mikulas Patocka 提交于
sysfs: use rb-tree for name lookups Use red-black tree for name lookups. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mikulas Patocka 提交于
sysfs: count subdirectories This patch introduces a subdirectory counter for each sysfs directory. Without the patch, sysfs_refresh_inode would walk all entries of the directory to calculate the number of subdirectories. This patch improves time of "ls -la /sys/block" when there are 10000 block devices from 9 seconds to 0.19 seconds. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Bart Van Assche 提交于
Although it is expected nowadays that every new sysfs attribute is documented under Documentation/ABI, this is not yet mentioned in the kernel documentation. This patch adds a note in the sysfs documentation about that requirement. Signed-off-by: NBart Van Assche <bvanassche@acm.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Harry Wei 提交于
The file is fs/debugfs/inode.c but the comment says it is file.c. This patch can fix this little mistake. Signed-off-by: NHarry Wei <harryxiyou@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Add group event scheduling option to perf record/stat MAINTAINERS: Fix list of perf events source files perf tools: Fix build against newer glibc perf tools: Fix error handling of unknown events perf evlist: Fix missing event name init for default event perf list: Fix exit value
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen由 Linus Torvalds 提交于
* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/tracing: Fix tracing config option properly xen: Do not enable PV IPIs when vector callback not present xen/x86: replace order-based range checking of M2P table by linear one xen: xen-selfballoon.c needs more header files
-
- 22 8月, 2011 3 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Steven Rostedt says we should use CONFIG_EVENT_TRACING. Cc:Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Stefano Stabellini 提交于
Fix regression for HVM case on older (<4.1.1) hypervisors caused by commit 99bbb3a8 Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Date: Thu Dec 2 17:55:10 2010 +0000 xen: PV on HVM: support PV spinlocks and IPIs This change replaced the SMP operations with event based handlers without taking into account that this only works when the hypervisor supports callback vectors. This causes unexplainable hangs early on boot for HVM guests with more than one CPU. BugLink: http://bugs.launchpad.net/bugs/791850 CC: stable@kernel.org Signed-off-by: NStefan Bader <stefan.bader@canonical.com> Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-and-Reported-by: NStefan Bader <stefan.bader@canonical.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: handle ack_busy when fetching the Config ROM
-
- 21 8月, 2011 4 次提交
-
-
由 Josef Bacik 提交于
This fixes a regression introduced by commit cdcb725c ("Btrfs: check if there is enough space for balancing smarter"). We can't do 64-bit divides on 32-bit architectures. In cases where we need to divide/multiply by 2 we should just left/right shift respectively, and in cases where theres N number of devices use do_div. Also make the counters u64 to match up with rw_devices. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Acked-and-tested-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: flush any pending end_io requests before DIO reads w/dioread_nolock ext4: fix nomblk_io_submit option so it correctly converts uninit blocks ext4: Resolve the hang of direct i/o read in handling EXT4_IO_END_UNWRITTEN. ext4: call ext4_ioend_wait and ext4_flush_completed_IO in ext4_evict_inode ext4: Fix ext4_should_writeback_data() for no-journal mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: sound/aoa/fabrics/layout.c: remove unneeded kfree ALSA: hda - Fix error check from snd_hda_get_conn_index() in patch_cirrus.c ALSA: hda - Don't spew too many ELD errors ALSA: usb-audio - Fix missing mixer dB information ALSA: hda - Add "PCM" volume to vmaster slave list ALSA: hda - Fix duplicated capture-volume creation for ALC268 models ALSA: ac97: Add HP Compaq dc5100 SFF(PT003AW) to Headphone Jack Sense whitelist ALSA: snd_usb_caiaq: track submitted output urbs
-
由 Randy Dunlap 提交于
Fix new kernel-doc warning in pci.c: Warning(drivers/pci/pci.c:3259): No description found for parameter 'mps' Warning(drivers/pci/pci.c:3259): Excess function parameter 'rq' description in 'pcie_set_mps' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 8月, 2011 8 次提交
-
-
由 Julia Lawall 提交于
The label outnodev is only used when kzalloc has not yet taken place or has failed, so there is no need for the call for kfree under this label. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; expression E1!=0,E2,E3,E4; statement S; iterator I; @@ ( if (...) { ... when != kfree(x) when != x = E3 when != E3 = x * return ...; } ... when != x = E2 when != I(...,x,...) S if (...) { ... when != x = E4 kfree(x); ... return ...; } ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
snd_hda_get_conn_index() returns a negative value while the current code stores it in an unsigned int. It must be stored in a signed integer. Reported-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Currently HD-audio driver shows the all error ELD byte as an error in the kernel message. This is annoying when the video driver doesn't set the correct ELD from the beginning. e.g. radeon sends a zero-byte data, but we still check ELD with the fixed 128 byte as a workaround for some broken devices, it spews 128-times errors. For avoiding this, the driver aborts reading when the first byte is invalid. In such a case, the whole data is certainly invalid. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel: drm/i915: set GFX_MODE to pre-Ivybridge default value even on Ivybridge
-
由 Jiaying Zhang 提交于
There is a race between ext4 buffer write and direct_IO read with dioread_nolock mount option enabled. The problem is that we clear PageWriteback flag during end_io time but will do uninitialized-to-initialized extent conversion later with dioread_nolock. If an O_direct read request comes in during this period, ext4 will return zero instead of the recently written data. This patch checks whether there are any pending uninitialized-to-initialized extent conversion requests before doing O_direct read to close the race. Note that this is just a bandaid fix. The fundamental issue is that we clear PageWriteback flag before we really complete an IO, which is problem-prone. To fix the fundamental issue, we may need to implement an extent tree cache that we can use to look up pending to-be-converted extents. Signed-off-by: NJiaying Zhang <jiayingz@google.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
由 Jesse Barnes 提交于
Prior to Ivybridge, the GFX_MODE would default to 0x800, meaning that MI_FLUSH would flush the TLBs in addition to the rest of the caches indicated in the MI_FLUSH command. However starting with Ivybridge, the register defaults to 0x2800 out of reset, meaning that to invalidate the TLB we need to use PIPE_CONTROL. Since we're not doing that yet, go back to the old default so things work. v2: don't forget to actually *clear* the new bit Reviewed-by: NEric Anholt <eric@anholt.net> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Tested-by: NKenneth Graunke <kenneth@whitecape.org> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-block: (23 commits) Revert "cfq: Remove special treatment for metadata rqs." block: fix flush machinery for stacking drivers with differring flush flags block: improve rq_affinity placement blktrace: add FLUSH/FUA support Move some REQ flags to the common bio/request area allow blk_flush_policy to return REQ_FSEQ_DATA independent of *FLUSH xen/blkback: Make description more obvious. cfq-iosched: Add documentation about idling block: Make rq_affinity = 1 work as expected block: swim3: fix unterminated of_device_id table block/genhd.c: remove useless cast in diskstats_show() drivers/cdrom/cdrom.c: relax check on dvd manufacturer value drivers/block/drbd/drbd_nl.c: use bitmap_parse instead of __bitmap_parse bsg-lib: add module.h include cfq-iosched: Reduce linked group count upon group destruction blk-throttle: correctly determine sync bio loop: fix deadlock when sysfs and LOOP_CLR_FD race against each other loop: add BLK_DEV_LOOP_MIN_COUNT=%i to allow distros 0 pre-allocated loop devices loop: add management interface for on-demand device allocation loop: replace linked list of allocated devices with an idr index ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: OF: Don't crash when bridge parent is NULL. PCI: export pcie_bus_configure_settings symbol PCI: code and comments cleanup PCI: make cardbus-bridge resources optional PCI: make SRIOV resources optional PCI : ability to relocate assigned pci-resources PCI: honor child buses add_size in hot plug configuration PCI: Set PCI-E Max Payload Size on fabric
-
- 19 8月, 2011 2 次提交
-
-
由 David Daney 提交于
In pcibios_get_phb_of_node(), we will crash while booting if bus->bridge->parent is NULL. Check for this case and avoid dereferencing the NULL pointer. Signed-off-by: NDavid Daney <david.daney@cavium.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Jens Axboe 提交于
We have a kernel build regression since 3.1-rc1, which is about 10% regression. The kernel source is in an ext3 filesystem. Alex Shi bisect it to commit: commit a07405b7 Author: Justin TerAvest <teravest@google.com> Date: Sun Jul 10 22:09:19 2011 +0200 cfq: Remove special treatment for metadata rqs. Apparently this is caused by lack metadata preemption, where ext3/ext4 do use READ_META. I didn't see a way to fix the issue, so suggest reverting the patch. This reverts commit a07405b7. Reported-by: Alex Shi<alex.shi@intel.com> Reported-by: Shaohua Li<shaohua.li@intel.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-