Update kernel InfiniBand midlayer to compile against the updated API for
low-level drivers.  This just amounts to passing NULL for all
userspace-related parameters, and setting userspace-related structure members
to NULL.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

First of a series of patches which add support for direct userspace access to
InfiniBand hardware -- so-called "userspace verbs." I believe these patches
are ready to merge, but a final review would be useful.

These patches should incorporate all of the feedback from the discussion when
I posted an earlier version back in April (see
http://lkml.org/lkml/2005/4/4/267 for the start of the thread).  In
particular, memory pinned for use by userspace is accounted for in
current->mm->vm_locked and requests to pin memory are checked against
RLIMIT_MEMLOCK.

This patch:

Modify the ib_verbs.h header file with changes required for InfiniBand
userspace verbs support.  We add a few structures to keep track of userspace
context, and extend the driver API so that low-level drivers know when they're
creating resources that will be used from userspace.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The infiniband code expects that the arch implements pgprot_noncached().

We're mapping PCI areas anyway, so this probabyl wasn't needed and we should
make infiniband stop doing that..

Cc: Roland Dreier <rolandd@cisco.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In __xprt_lock_write() we check to see if `task' is NULL, but in other places
we just go and dereference it.

`task' shouldn't be NULL anyway, so remove this test.

This defect was found automatically by Coverity Prevent, a static analysis
tool.
Signed-off-by: NZaur Kambarov <zkambarov@coverity.com>
Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We're dereferencing `flp' and then we're testing it for NULLness.

Either the compiler accidentally saved us or the existing null-pointer checdk
is redundant.

This defect was found automatically by Coverity Prevent, a static analysis tool.
Signed-off-by: NZaur Kambarov <zkambarov@coverity.com>
Cc: Matthew Wilcox <willy@debian.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Correctly test for a null pointer before going and dereferencing it.

This defect was found automatically by Coverity Prevent, a static analysis
tool.
Signed-off-by: NZaur Kambarov <zkambarov@coverity.com>
Cc: <linux-fbdev-devel@lists.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The BKS might be reacquired before we have dropped PREEMPT_ACTIVE, which
could trigger a second could trigger a second cond_resched() call.  Bug
found by Hirofumi Ogawa.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The attached patch makes the keyring functions calculate the new size of a
keyring's payload based on the size of pointer to the key struct, not the size
of the key struct itself.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix debugging printk.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

GCC 4 complains because the function put_compat_shminfo() can't get to its
return statement if there is no error...  If the function does not return
-EFAULT, it doesn't return anything at all.  Looks like a typo.
Signed-off-by: NJesse Millan <jessem@cs.pdx.edu>
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We are not using the in-inode space for xattrs in reserved inodes because
mkfs.ext3 doesn't initialize it properly.  For those inodes, we set
i_extra_isize to 0.  Make sure that we also don't overwrite the
i_extra_isize field when writing out the inode in that case.  This is for
cleanliness only, and doesn't fix an actual bug.
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a new section called ".data.read_mostly" for data items that are read
frequently and rarely written to like cpumaps etc.

If these maps are placed in the .data section then these frequenly read
items may end up in cachelines with data is is frequently updated.  In that
case all processors in an SMP system must needlessly reload the cachelines
again and again containing elements of those frequently used variables.

The ability to share these cachelines will allow each cpu in an SMP system
to keep local copies of those shared cachelines thereby optimizing
performance.
Signed-off-by: NAlok N Kataria <alokk@calsoftinc.com>
Signed-off-by: NShobhit Dayal <shobhit@calsoftinc.com>
Signed-off-by: NChristoph Lameter <christoph@scalex86.org>
Signed-off-by: NShai Fultheim <shai@scalex86.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Original patch from Matt Mackall <mpm@selenic.com>
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use a bit spin lock in the first buffer of the page to synchronise asynch
IO buffer completions, instead of the global page_uptodate_lock, which is
showing some scalabilty problems.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The patch fixes a few corner cases around tty line editing with
very long input lines:

- n_tty_receive_char(): don't simply drop eol characters,
  otherwise canon_data isn't increased and the reader isn't woken
  up.

- n_tty_receive_room(): If there is no newline pending and the
  edit buffer is full, allow only a single character to be written
  (until eol is found and the line is flushed), so characters from
  the next line aren't dropped.

- write_chan(): if an incomplete line was written, continue
  writing until write() returns 0, otherwise it might not write
  the eol character to flush the line and the writer goes to sleep
  without ever being woken up.

BTW the core problem is that part of this should be handled in the
receive_buf path, but for this it has to return the number of
written characters, as the amount of written characters may not be
the same as the amount of characters going into the write buffer,
so the receive_room() usage in pty_write() is not really reliable.

Alan said:

The problem looks valid. The behaviour of 'traditional unix' appears to
be the following

	If you exceed the line limit then beep and drop the character
	Always allow EOL to complete a canonical line input
	Always do signal/control processing if enabled
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

xtensa is now in -rc1, with the obsolete syscalls still in there, so I
guess this about the last chance to correct the ABI.  Applying the patch
obviously breaks all sorts of user space binaries and probably also
requires the appropriate changes to be made to libc.

On the other hand, if a decision is made to keep the broken interface, it
should at least be a conscious one instead of an oversight.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Replace a semaphore (winch_handler_sem) used in atomic code with a
spinlock, and reduces as needed the amount of protected code to the bare
minimum (for instance no kmalloc calls are needed).

This fixes the last problems with spinlocking (in UP mode with DEBUG
options); the semaphore, taken inside spinlocks, caused a "spin_lock was
already locked" warning, without this patch.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some time ago a trivial patch broke HPPFS (one var became a pointer, not
all uses were updated).  It wasn't fixed at that time because not very
used, now it's been requested so I've fixed this, and it has been tested
positively (at least partially).
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch implements the clone-stub mechanism, which allows skas0 to run
with proc_mm==0, even if the clib in UML uses modify_ldt.

Note: There is a bug in skas3.v7 host patch, that avoids UML-skas from
running properly on a SMP-box.  In full skas3, I never really saw problems,
but in skas0 they showed up.

More commentary by jdike - What this patch does is makes sure that the host
parent of each new host process matches the UML parent of the corresponding
UML process.  This ensures that any changed LDTs are inherited.  This is
done by having clone actually called by the UML process from its stub,
rather than by the kernel.  We have special syscall stubs that are loaded
onto the stub code page because that code must be completely
self-contained.  These stubs are given C interfaces, and used like normal C
functions, but there are subtleties.  Principally, we have to be careful
about stack variables in stub_clone_handler after the clone.  The code is
written so that there aren't any - everything boils down to a fixed
address.  If there were any locals, references to them after the clone
would be wrong because the stack just changed.
Signed-off-by: NBodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

UML has had two modes of operation - an insecure, slow mode (tt mode) in
which the kernel is mapped into every process address space which requires
no host kernel modifications, and a secure, faster mode (skas mode) in
which the UML kernel is in a separate host address space, which requires a
patch to the host kernel.

This patch implements something very close to skas mode for hosts which
don't support skas - I'm calling this skas0.  It provides the security of
the skas host patch, and some of the performance gains.

The two main things that are provided by the skas patch, /proc/mm and
PTRACE_FAULTINFO, are implemented in a way that require no host patch.

For the remote address space changing stuff (mmap, munmap, and mprotect),
we set aside two pages in the process above its stack, one of which
contains a little bit of code which can call mmap et al.

To update the address space, the system call information (system call
number and arguments) are written to the stub page above the code.  The
%esp is set to the beginning of the data, the %eip is set the the start of
the stub, and it repeatedly pops the information into its registers and
makes the system call until it sees a system call number of zero.  This is
to amortize the cost of the context switch across multiple address space
updates.

When the updates are done, it SIGSTOPs itself, and the kernel process
continues what it was doing.

For a PTRACE_FAULTINFO replacement, we set up a SIGSEGV handler in the
child, and let it handle segfaults rather than nullifying them.  The
handler is in the same page as the mmap stub.  The second page is used as
the stack.  The handler reads cr2 and err from the sigcontext, sticks them
at the base of the stack in a faultinfo struct, and SIGSTOPs itself.  The
kernel then reads the faultinfo and handles the fault.

A complication on x86_64 is that this involves resetting the registers to
the segfault values when the process is inside the kill system call.  This
breaks on x86_64 because %rcx will contain %rip because you tell SYSRET
where to return to by putting the value in %rcx.  So, this corrupts $rcx on
return from the segfault.  To work around this, I added an
arch_finish_segv, which on x86 does nothing, but which on x86_64 ptraces
the child back through the sigreturn.  This causes %rcx to be restored by
sigreturn and avoids the corruption.  Ultimately, I think I will replace
this with the trick of having it send itself a blocked signal which will be
unblocked by the sigreturn.  This will allow it to be stopped just after
the sigreturn, and PTRACE_SYSCALLed without all the back-and-forth of
PTRACE_SYSCALLing it through sigreturn.

This runs on a stock host, so theoretically (and hopefully), tt mode isn't
needed any more.  We need to make sure that this is better in every way
than tt mode, though.  I'm concerned about the speed of address space
updates and page fault handling, since they involve extra round-trips to
the child.  We can amortize the round-trip cost for large address space
updates by writing all of the operations to the data page and having the
child execute them all at the same time.  This will help fork and exec, but
not page faults, since they involve only one page.

I can't think of any way to help page faults, except to add something like
PTRACE_FAULTINFO to the host.  There is PTRACE_SIGINFO, but UML doesn't use
siginfo for SIGSEGV (or anything else) because there isn't enough
information in the siginfo struct to handle page faults (the faulting
operation type is missing).  Adding that would make PTRACE_SIGINFO a usable
equivalent to PTRACE_FAULTINFO.

As for the code itself:

- The system call stub is in arch/um/kernel/sys-$(SUBARCH)/stub.S.  It is
  put in its own section of the binary along with stub_segv_handler in
  arch/um/kernel/skas/process.c.  This is manipulated with run_syscall_stub
  in arch/um/kernel/skas/mem_user.c.  syscall_stub will execute any system
  call at all, but it's only used for mmap, munmap, and mprotect.

- The x86_64 stub calls sigreturn by hand rather than allowing the normal
  sigreturn to happen, because the normal sigreturn is a SA_RESTORER in
  UML's address space provided by libc.  Needless to say, this is not
  available in the child's address space.  Also, it does a couple of odd
  pops before that which restore the stack to the state it was in at the
  time the signal handler was called.

- There is a new field in the arch mmu_context, which is now a union.
  This is the pid to be manipulated rather than the /proc/mm file
  descriptor.  Code which deals with this now checks proc_mm to see whether
  it should use the usual skas code or the new code.

- userspace_tramp is now used to create a new host process for every UML
  process, rather than one per UML processor.  It checks proc_mm and
  ptrace_faultinfo to decide whether to map in the pages above its stack.

- start_userspace now makes CLONE_VM conditional on proc_mm since we need
  separate address spaces now.

- switch_mm_skas now just sets userspace_pid[0] to the new pid rather
  than PTRACE_SWITCH_MM.  There is an addition to userspace which updates
  its idea of the pid being manipulated each time around the loop.  This is
  important on exec, when the pid will change underneath userspace().

- The stub page has a pte, but it can't be mapped in using tlb_flush
  because it is part of tlb_flush.  This is why it's required for it to be
  mapped in by userspace_tramp.

Other random things:

- The stub section in uml.lds.S is page aligned.  This page is written
  out to the backing vm file in setup_physmem because it is mapped from
  there into user processes.

- There's some confusion with TASK_SIZE now that there are a couple of
  extra pages that the process can't use.  TASK_SIZE is considered by the
  elf code to be the usable process memory, which is reasonable, so it is
  decreased by two pages.  This confuses the definition of
  USER_PGDS_IN_LAST_PML4, making it too small because of the rounding down
  of the uneven division.  So we round it to the nearest PGDIR_SIZE rather
  than the lower one.

- I added a missing PT_SYSCALL_ARG6_OFFSET macro.

- um_mmu.h was made into a userspace-usable file.

- proc_mm and ptrace_faultinfo are globals which say whether the host
  supports these features.

- There is a bad interaction between the mm.nr_ptes check at the end of
  exit_mmap, stack randomization, and skas0.  exit_mmap will stop freeing
  pages at the PGDIR_SIZE boundary after the last vma.  If the stack isn't
  on the last page table page, the last pte page won't be freed, as it
  should be since the stub ptes are there, and exit_mmap will BUG because
  there is an unfreed page.  To get around this, TASK_SIZE is set to the
  next lowest PGDIR_SIZE boundary and mm->nr_ptes is decremented after the
  calls to init_stub_pte.  This ensures that we know the process stack (and
  all other process mappings) will be below the top page table page, and
  thus we know that mm->nr_ptes will be one too many, and can be
  decremented.

Things that need fixing:

- We may need better assurrences that the stub code is PIC.

- The stub pte is set up in init_new_context_skas.

- alloc_pgdir is probably the right place.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

freezeable() already tests for TRACED/STOPPED processes, no need to do it
twice.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix error handling and whitespace in swsusp.c.  swsusp_free() was called when
there was nothing allocating, leading to oops.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move device name resolution code around so that it is not called from
resume-from-initrd.  name_to_dev_t may be unavailable at that point.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix u32 vs pm_message_t confusion in cpufreq.
Signed-off-by: NBernard Blackham <bernard@blackham.com.au>
Signed-off-by: NPavel Machek <pavel@suse.cz>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Few more u32 vs. pm_message_t fixes.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If CONFIG_NUMA isn't set, we use the define in <linux/mmzone.h> for
early_pfn_to_nid (which defines it to 0).

Because of this, the prototype needs to move inside the CONFIG_NUMA too, or
anal gcc's get really confused.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The recent cleanups to asm-i386/mmzone.h were suboptimal nesting an ifdef of
the same symbol.  This patch removes some of the ifdef'ery to make things more
readable again.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There has been some discuss about solving the SMP MTRR suspend/resume
breakage, but I didn't find a patch for it.  This is an intent for it.  The
basic idea is moving mtrr initializing into cpu_identify for all APs (so it
works for cpu hotplug).  For BP, restore_processor_state is responsible for
restoring MTRR.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Acked-by: NAndi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch by Yoshihiro MATSUYAMA (already ACK'ed by David Howells) adds a
defconfig for the frv arch.
Signed-Off-By: NYoshihiro MATSUYAMA <y.matsu@jp.fujitsu.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We dont need to use the PERFMON exception on POWER5, in fact the firmware
returns an error.  Due to this just remove the warning.

Also now that we have proper runlatch support we can remove the bootup
hack.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Not sure if we really need this, but it was handy to know which iSeries loop I
was testing.

Be consistent about printing which idle loop we're using, with this patch we
cover all cases.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a compile warning introduced by the previous patches.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- remove some unnecessary includes
- add runlatch support
- no need to use raw_smp_processor_id any more, current preempt debug
  logic checks for processes that are bound to one cpu.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- separate out sleep logic in dedicated_idle, it was so far indented
  that it got squashed against the right side of the screen.
- add runlatch support, looping on runlatch disable.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- remove min/max yield time, we dont use the values anywhere
- separate shared and dedicated idle loops
- check need_resched again with irqs off to avoid sleeping with pending work
- continually set runlatch off in idle loop, this means we dont need to
  turn the runlatch off on exception exit and suffer that associated
  cost for all exceptions. (A future patch will turn the runlatch on at
  exception entry)
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Now that the idle loop is configured by each platform we don't need
idle_setup() anymore.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes up iSeries, pSeries, pmac and maple to set the correct idle
function for each platform.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

dedicated_idle() and shared_idle() are only used by pSeries, so move them into
pSeries_setup.c
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move iSeries_idle() into iSeries_setup.c, no one else needs to know about it.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>