That first branch testing pkg against __max_logical_packages is wrong,
because if the first pkg id is larger, then the find_first_zero will
find us logical package id 0. However, if the second pkg id is indeed
0, we'll again claim it without testing if it was already taken.

Also, it fails to print the mapping.

Fixes: 1f12e32f ("x86/topology: Create logical package id")
Reported-by: NXiong Zhou <jencce.kernel@gmail.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: aherrmann@suse.com
Cc: bp@alien8.de
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Link: http://lkml.kernel.org/r/20160317095220.GO6344@twins.programming.kicks-ass.net
Link: http://lkml.kernel.org/r/20160318150538.482393396@infradead.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Harry reported, that he's able to trigger a system freeze with cpu hot
unplug. The freeze turned out to be a live lock caused by recent changes in
irq_force_complete_move().

When fixup_irqs() and from there irq_force_complete_move() is called on the
dying cpu, then all other cpus are in stop machine an wait for the dying cpu
to complete the teardown. If there is a move of an interrupt pending then
irq_force_complete_move() sends the cleanup IPI to the cpus in the old_domain
mask and waits for them to clear the mask. That's obviously impossible as
those cpus are firmly stuck in stop machine with interrupts disabled.

I should have known that, but I completely overlooked it being concentrated on
the locking issues around the vectors. And the existance of the call to
__irq_complete_move() in the code, which actually sends the cleanup IPI made
it reasonable to wait for that cleanup to complete. That call was bogus even
before the recent changes as it was just a pointless distraction.

We have to look at two cases:

1) The move_in_progress flag of the interrupt is set

   This means the ioapic has been updated with the new vector, but it has not
   fired yet. In theory there is a race:

   set_ioapic(new_vector) <-- Interrupt is raised before update is effective,
   			      i.e. it's raised on the old vector. 

   So if the target cpu cannot handle that interrupt before the old vector is
   cleaned up, we get a spurious interrupt and in the worst case the ioapic
   irq line becomes stale, but my experiments so far have only resulted in
   spurious interrupts.

   But in case of cpu hotplug this should be a non issue because if the
   affinity update happens right before all cpus rendevouz in stop machine,
   there is no way that the interrupt can be blocked on the target cpu because
   all cpus loops first with interrupts enabled in stop machine, so the old
   vector is not yet cleaned up when the interrupt fires.

   So the only way to run into this issue is if the delivery of the interrupt
   on the apic/system bus would be delayed beyond the point where the target
   cpu disables interrupts in stop machine. I doubt that it can happen, but at
   least there is a theroretical chance. Virtualization might be able to
   expose this, but AFAICT the IOAPIC emulation is not as stupid as the real
   hardware.

   I've spent quite some time over the weekend to enforce that situation,
   though I was not able to trigger the delayed case.

2) The move_in_progress flag is not set and the old_domain cpu mask is not
   empty.

   That means, that an interrupt was delivered after the change and the
   cleanup IPI has been sent to the cpus in old_domain, but not all CPUs have
   responded to it yet.

In both cases we can assume that the next interrupt will arrive on the new
vector, so we can cleanup the old vectors on the cpus in the old_domain cpu
mask.

Fixes: 98229aa3 "x86/irq: Plug vector cleanup race"
Reported-by: NHarry Junior <harryjr@outlook.fr>
Tested-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1603140931430.3657@nanosSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The topology_core_cpumask is used to find a neighbour cpu in
calibrate_delay_is_known(). It might not be allocated at the first invocation
of that function on the boot cpu, when CONFIG_CPUMASK_OFFSTACK is set.

The mask is allocated later in native_smp_prepare_cpus. As a consequence the
underlying find_next_bit() call dereferences a NULL pointer.

Add a proper check to prevent this.

Fixes: c25323c0 "x86/tsc: Use topology functions"
Reported-and-tested-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1603180843270.3978@nanosSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Since 4.4, I've been able to trigger this occasionally:

===============================
[ INFO: suspicious RCU usage. ]
4.5.0-rc7-think+ #3 Not tainted
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20160315012054.GA17765@codemonkey.org.ukSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

-------------------------------
./arch/x86/include/asm/msr-trace.h:47 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

RCU used illegally from idle CPU!
rcu_scheduler_active = 1, debug_locks = 1
RCU used illegally from extended quiescent state!
no locks held by swapper/3/0.

stack backtrace:
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.5.0-rc7-think+ #3
 ffffffff92f821e0 1f3e5c340597d7fc ffff880468e07f10 ffffffff92560c2a
 ffff880462145280 0000000000000001 ffff880468e07f40 ffffffff921376a6
 ffffffff93665ea0 0000cc7c876d28da 0000000000000005 ffffffff9383dd60
Call Trace:
 <IRQ>  [<ffffffff92560c2a>] dump_stack+0x67/0x9d
 [<ffffffff921376a6>] lockdep_rcu_suspicious+0xe6/0x100
 [<ffffffff925ae7a7>] do_trace_write_msr+0x127/0x1a0
 [<ffffffff92061c83>] native_apic_msr_eoi_write+0x23/0x30
 [<ffffffff92054408>] smp_trace_call_function_interrupt+0x38/0x360
 [<ffffffff92d1ca60>] trace_call_function_interrupt+0x90/0xa0
 <EOI>  [<ffffffff92ac5124>] ? cpuidle_enter_state+0x1b4/0x520

Move the entering_irq() call before ack_APIC_irq(), because entering_irq()
tells the RCU susbstems to end the extended quiescent state, so that the
following trace call in ack_APIC_irq() works correctly.
Suggested-by: NAndi Kleen <ak@linux.intel.com>
Fixes: 4787c368 "x86/tracing: Add irq_enter/exit() in smp_trace_reschedule_interrupt()"
Signed-off-by: NDave Jones <davej@codemonkey.org.uk>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org

iopl(3) is supposed to work if iopl is already 3, even if
unprivileged.  This didn't work right on Xen PV.  Fix it.
Reviewewd-by: NJan Beulich <JBeulich@suse.com>
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/8ce12013e6e4c0a44a97e316be4a6faff31bd5ea.1458162709.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

On Xen PV, regs->flags doesn't reliably reflect IOPL and the
exit-to-userspace code doesn't change IOPL.  We need to context
switch it manually.

I'm doing this without going through paravirt because this is
specific to Xen PV.  After the dust settles, we can merge this with
the 32-bit code, tidy up the iopl syscall implementation, and remove
the set_iopl pvop entirely.

Fixes XSA-171.
Reviewewd-by: NJan Beulich <JBeulich@suse.com>
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/693c3bd7aeb4d3c27c92c622b7d0f554a458173c.1458162709.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

This exercises two cases that are known to be buggy on Xen PV right
now.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/61afe904c95c92abb29cd075b51e10e7feb0f774.1458162709.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Pull in some merge window leftovers.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Returning a 'bool' was very unpopular. Doubly so because the
code was just wrong (returning zero for true, one for false;
great for shell programming, not so good for C).

Change return type to "int". Keep zero as the success indicator
because it matches other similar code and people may be more
comfortable writing:

	if (memcpy_mcsafe(to, from, count)) {
		printk("Sad panda, copy failed\n");
		...
	}

Make the failure return value -EFAULT for now.

Reported by: Mika Penttilä <mika.penttila@nextfour.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: mika.penttila@nextfour.com
Fixes: 92b0729c ("x86/mm, x86/mce: Add memcpy_mcsafe()")
Link: http://lkml.kernel.org/r/695f14233fa7a54fcac4406c706d7fec228e3f4c.1457993040.git.tony.luck@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull cpu hotplug updates from Thomas Gleixner:
 "This is the first part of the ongoing cpu hotplug rework:

   - Initial implementation of the state machine

   - Runs all online and prepare down callbacks on the plugged cpu and
     not on some random processor

   - Replaces busy loop waiting with completions

   - Adds tracepoints so the states can be followed"

More detailed commentary on this work from an earlier email:
 "What's wrong with the current cpu hotplug infrastructure?

   - Asymmetry

     The hotplug notifier mechanism is asymmetric versus the bringup and
     teardown.  This is mostly caused by the notifier mechanism.

   - Largely undocumented dependencies

     While some notifiers use explicitely defined notifier priorities,
     we have quite some notifiers which use numerical priorities to
     express dependencies without any documentation why.

   - Control processor driven

     Most of the bringup/teardown of a cpu is driven by a control
     processor.  While it is understandable, that preperatory steps,
     like idle thread creation, memory allocation for and initialization
     of essential facilities needs to be done before a cpu can boot,
     there is no reason why everything else must run on a control
     processor.  Before this patch series, bringup looks like this:

       Control CPU                     Booting CPU

       do preparatory steps
       kick cpu into life

                                       do low level init

       sync with booting cpu           sync with control cpu

       bring the rest up

   - All or nothing approach

     There is no way to do partial bringups.  That's something which is
     really desired because we waste e.g.  at boot substantial amount of
     time just busy waiting that the cpu comes to life.  That's stupid
     as we could very well do preparatory steps and the initial IPI for
     other cpus and then go back and do the necessary low level
     synchronization with the freshly booted cpu.

   - Minimal debuggability

     Due to the notifier based design, it's impossible to switch between
     two stages of the bringup/teardown back and forth in order to test
     the correctness.  So in many hotplug notifiers the cancel
     mechanisms are either not existant or completely untested.

   - Notifier [un]registering is tedious

     To [un]register notifiers we need to protect against hotplug at
     every callsite.  There is no mechanism that bringup/teardown
     callbacks are issued on the online cpus, so every caller needs to
     do it itself.  That also includes error rollback.

  What's the new design?

     The base of the new design is a symmetric state machine, where both
     the control processor and the booting/dying cpu execute a well
     defined set of states.  Each state is symmetric in the end, except
     for some well defined exceptions, and the bringup/teardown can be
     stopped and reversed at almost all states.

     So the bringup of a cpu will look like this in the future:

       Control CPU                     Booting CPU

       do preparatory steps
       kick cpu into life

                                       do low level init

       sync with booting cpu           sync with control cpu

                                       bring itself up

     The synchronization step does not require the control cpu to wait.
     That mechanism can be done asynchronously via a worker or some
     other mechanism.

     The teardown can be made very similar, so that the dying cpu cleans
     up and brings itself down.  Cleanups which need to be done after
     the cpu is gone, can be scheduled asynchronously as well.

  There is a long way to this, as we need to refactor the notion when a
  cpu is available.  Today we set the cpu online right after it comes
  out of the low level bringup, which is not really correct.

  The proper mechanism is to set it to available, i.e. cpu local
  threads, like softirqd, hotplug thread etc. can be scheduled on that
  cpu, and once it finished all booting steps, it's set to online, so
  general workloads can be scheduled on it.  The reverse happens on
  teardown.  First thing to do is to forbid scheduling of general
  workloads, then teardown all the per cpu resources and finally shut it
  off completely.

  This patch series implements the basic infrastructure for this at the
  core level.  This includes the following:

   - Basic state machine implementation with well defined states, so
     ordering and prioritization can be expressed.

   - Interfaces to [un]register state callbacks

     This invokes the bringup/teardown callback on all online cpus with
     the proper protection in place and [un]installs the callbacks in
     the state machine array.

     For callbacks which have no particular ordering requirement we have
     a dynamic state space, so that drivers don't have to register an
     explicit hotplug state.

     If a callback fails, the code automatically does a rollback to the
     previous state.

   - Sysfs interface to drive the state machine to a particular step.

     This is only partially functional today.  Full functionality and
     therefor testability will be achieved once we converted all
     existing hotplug notifiers over to the new scheme.

   - Run all CPU_ONLINE/DOWN_PREPARE notifiers on the booting/dying
     processor:

       Control CPU                     Booting CPU

       do preparatory steps
       kick cpu into life

                                       do low level init

       sync with booting cpu           sync with control cpu
       wait for boot
                                       bring itself up

                                       Signal completion to control cpu

     In a previous step of this work we've done a full tree mechanical
     conversion of all hotplug notifiers to the new scheme.  The balance
     is a net removal of about 4000 lines of code.

     This is not included in this series, as we decided to take a
     different approach.  Instead of mechanically converting everything
     over, we will do a proper overhaul of the usage sites one by one so
     they nicely fit into the symmetric callback scheme.

     I decided to do that after I looked at the ugliness of some of the
     converted sites and figured out that their hotplug mechanism is
     completely buggered anyway.  So there is no point to do a
     mechanical conversion first as we need to go through the usage
     sites one by one again in order to achieve a full symmetric and
     testable behaviour"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  cpu/hotplug: Document states better
  cpu/hotplug: Fix smpboot thread ordering
  cpu/hotplug: Remove redundant state check
  cpu/hotplug: Plug death reporting race
  rcu: Make CPU_DYING_IDLE an explicit call
  cpu/hotplug: Make wait for dead cpu completion based
  cpu/hotplug: Let upcoming cpu bring itself fully up
  arch/hotplug: Call into idle with a proper state
  cpu/hotplug: Move online calls to hotplugged cpu
  cpu/hotplug: Create hotplug threads
  cpu/hotplug: Split out the state walk into functions
  cpu/hotplug: Unpark smpboot threads from the state machine
  cpu/hotplug: Move scheduler cpu_online notifier to hotplug core
  cpu/hotplug: Implement setup/removal interface
  cpu/hotplug: Make target state writeable
  cpu/hotplug: Add sysfs state interface
  cpu/hotplug: Hand in target state to _cpu_up/down
  cpu/hotplug: Convert the hotplugged cpu work to a state machine
  cpu/hotplug: Convert to a state machine for the control processor
  cpu/hotplug: Add tracepoints
  ...

Pull irq updates from Thomas Gleixner:
 "The 4.6 pile of irq updates contains:

   - Support for IPI irqdomains to support proper integration of IPIs to
     and from coprocessors.  The first user of this new facility is
     MIPS.  The relevant MIPS patches come with the core to avoid merge
     ordering issues and have been acked by Ralf.

   - A new command line option to set the default interrupt affinity
     mask at boot time.

   - Support for some more new ARM and MIPS interrupt controllers:
     tango, alpine-msix and bcm6345-l1

   - Two small cleanups for x86/apic which we merged into irq/core to
     avoid yet another branch in x86 with two tiny commits.

   - The usual set of updates, cleanups in drivers/irqchip.  Mostly in
     the area of ARM-GIC, arada-37-xp and atmel chips.  Nothing
     outstanding here"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits)
  irqchip/irq-alpine-msi: Release the correct domain on error
  irqchip/mxs: Fix error check of of_io_request_and_map()
  irqchip/sunxi-nmi: Fix error check of of_io_request_and_map()
  genirq: Export IRQ functions for module use
  irqchip/gic/realview: Support more RealView DCC variants
  Documentation/bindings: Document the Alpine MSIX driver
  irqchip: Add the Alpine MSIX interrupt controller
  irqchip/gic-v3: Always return IRQ_SET_MASK_OK_DONE in gic_set_affinity
  irqchip/gic-v3-its: Mark its_init() and its children as __init
  irqchip/gic-v3: Remove gic_root_node variable from the ITS code
  irqchip/gic-v3: ACPI: Add redistributor support via GICC structures
  irqchip/gic-v3: Add ACPI support for GICv3/4 initialization
  irqchip/gic-v3: Refactor gic_of_init() for GICv3 driver
  x86/apic: Deinline _flat_send_IPI_mask, save ~150 bytes
  x86/apic: Deinline __default_send_IPI_*, save ~200 bytes
  dt-bindings: interrupt-controller: Add SoC-specific compatible string to Marvell ODMI
  irqchip/mips-gic: Add new DT property to reserve IPIs
  MIPS: Delete smp-gic.c
  MIPS: Make smp CMP, CPS and MT use the new generic IPI functions
  MIPS: Add generic SMP IPI support
  ...

Pull timer updates from Thomas Gleixner:
 "The timer department delivers this time:

   - Support for cross clock domain timestamps in the core code plus a
     first user.  That allows more precise timestamping for PTP and
     later for audio and other peripherals.

     The ptp/e1000e patches have been acked by the relevant maintainers
     and are carried in the timer tree to avoid merge ordering issues.

   - Support for unregistering the current clocksource watchdog.  That
     lifts a limitation for switching clocksources which has been there
     from day 1

   - The usual pile of fixes and updates to the core and the drivers.
     Nothing outstanding and exciting"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  time/timekeeping: Work around false positive GCC warning
  e1000e: Adds hardware supported cross timestamp on e1000e nic
  ptp: Add PTP_SYS_OFFSET_PRECISE for driver crosstimestamping
  x86/tsc: Always Running Timer (ART) correlated clocksource
  hrtimer: Revert CLOCK_MONOTONIC_RAW support
  time: Add history to cross timestamp interface supporting slower devices
  time: Add driver cross timestamp interface for higher precision time synchronization
  time: Remove duplicated code in ktime_get_raw_and_real()
  time: Add timekeeping snapshot code capturing system time and counter
  time: Add cycles to nanoseconds translation
  jiffies: Use CLOCKSOURCE_MASK instead of constant
  clocksource: Introduce clocksource_freq2mult()
  clockevents/drivers/exynos_mct: Implement ->set_state_oneshot_stopped()
  clockevents/drivers/arm_global_timer: Implement ->set_state_oneshot_stopped()
  clockevents/drivers/arm_arch_timer: Implement ->set_state_oneshot_stopped()
  clocksource/drivers/arm_global_timer: Register delay timer
  clocksource/drivers/lpc32xx: Support timer-based ARM delay
  clocksource/drivers/lpc32xx: Support periodic mode
  clocksource/drivers/lpc32xx: Don't use the prescaler counter for clockevents
  clocksource/drivers/rockchip: Add err handle for rk_timer_init
  ...

Pull RCU updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Miscellaneous fixes, cleanups, restructuring.

   - RCU torture-test updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Export rcu_gp_is_normal()
  rcu: Remove rcu_user_hooks_switch
  rcu: Catch up rcu_report_qs_rdp() comment with reality
  rcu: Document unique-name limitation for DEFINE_STATIC_SRCU()
  rcu: Make rcu/tiny_plugin.h explicitly non-modular
  irq: Privatize irq_common_data::state_use_accessors
  RCU: Privatize rcu_node::lock
  sparse: Add __private to privatize members of structs
  rcu: Remove useless rcu_data_p when !PREEMPT_RCU
  rcutorture: Correct no-expedite console messages
  rcu: Set rdp->gpwrap when CPU is idle
  rcu: Stop treating in-kernel CPU-bound workloads as errors
  rcu: Update rcu_report_qs_rsp() comment
  rcu: Assign false instead of 0 for ->core_needs_qs
  rcutorture: Check for self-detected stalls
  rcutorture: Don't keep empty console.log.diags files
  rcutorture: Add checks for rcutorture writer starvation

Pull x86 timer update from Ingo Molnar:
 "A single simplification of the x86 TSC code"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Use topology functions

Pull x86 core platform updates from Ingo Molnar:
 "Intel Quark and Geode SoC platform updates"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/intel/quark: Drop IMR lock bit support
  x86/platform/intel/mid: Remove dead code
  x86/platform: Make platform/geode/net5501.c explicitly non-modular
  x86/platform: Make platform/geode/alix.c explicitly non-modular
  x86/platform: Make platform/geode/geos.c explicitly non-modular
  x86/platform: Make platform/intel-quark/imr_selftest.c explicitly non-modular
  x86/platform: Make platform/intel-quark/imr.c explicitly non-modular

Pull x86 mm updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Enable full ASLR randomization for 32-bit programs (Hector
     Marco-Gisbert)

   - Add initial minimal INVPCI support, to flush global mappings (Andy
     Lutomirski)

   - Add KASAN enhancements (Andrey Ryabinin)

   - Fix mmiotrace for huge pages (Karol Herbst)

   - ... misc cleanups and small enhancements"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/32: Enable full randomization on i386 and X86_32
  x86/mm/kmmio: Fix mmiotrace for hugepages
  x86/mm: Avoid premature success when changing page attributes
  x86/mm/ptdump: Remove paravirt_enabled()
  x86/mm: Fix INVPCID asm constraint
  x86/dmi: Switch dmi_remap() from ioremap() [uncached] to ioremap_cache()
  x86/mm: If INVPCID is available, use it to flush global mappings
  x86/mm: Add a 'noinvpcid' boot option to turn off INVPCID
  x86/mm: Add INVPCID helpers
  x86/kasan: Write protect kasan zero shadow
  x86/kasan: Clear kasan_zero_page after TLB flush
  x86/mm/numa: Check for failures in numa_clear_kernel_node_hotplug()
  x86/mm/numa: Clean up numa_clear_kernel_node_hotplug()
  x86/mm: Make kmap_prot into a #define
  x86/mm/32: Set NX in __supported_pte_mask before enabling paging
  x86/mm: Streamline and restore probe_memory_block_size()

Pull x86 microcode updates from Ingo Molnar:
 "The biggest change in this cycle was the separation of the microcode
  loading mechanism from the initrd code plus the support of built-in
  microcode images.

  There were also lots cleanups and general restructuring (by Borislav
  Petkov)"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/microcode/intel: Drop orig_sum from ext signature checksum
  x86/microcode/intel: Improve microcode sanity-checking error messages
  x86/microcode/intel: Merge two consecutive if-statements
  x86/microcode/intel: Get rid of DWSIZE
  x86/microcode/intel: Change checksum variables to u32
  x86/microcode: Use kmemdup() rather than duplicating its implementation
  x86/microcode: Remove unnecessary paravirt_enabled check
  x86/microcode: Document builtin microcode loading method
  x86/microcode/AMD: Issue microcode updated message later
  x86/microcode/intel: Cleanup get_matching_model_microcode()
  x86/microcode/intel: Remove unused arg of get_matching_model_microcode()
  x86/microcode/intel: Rename mc_saved_in_initrd
  x86/microcode/intel: Use *wrmsrl variants
  x86/microcode/intel: Cleanup apply_microcode_intel()
  x86/microcode/intel: Move the BUG_ON up and turn it into WARN_ON
  x86/microcode/intel: Rename mc_intel variable to mc
  x86/microcode/intel: Rename mc_saved_count to num_saved
  x86/microcode/intel: Rename local variables of type struct mc_saved_data
  x86/microcode/AMD: Drop redundant printk prefix
  x86/microcode: Issue update message only once
  ...

Pull x86 fpu updates from Ingo Molnar:
 "The biggest change in terms of impact is the changing of the FPU
  context switch model to 'eagerfpu' for all CPU types, via: commit
  58122bf1: "x86/fpu: Default eagerfpu=on on all CPUs"

  This makes all FPU saves and restores synchronous and makes the FPU
  code a lot more obvious to read.  In the next cycle, if this change is
  problem free, we'll remove the old lazy FPU restore code altogether.

  This change flushed out some old bugs, which should all be fixed by
  now, BYMMV"

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Default eagerfpu=on on all CPUs
  x86/fpu: Speed up lazy FPU restores slightly
  x86/fpu: Fold fpu_copy() into fpu__copy()
  x86/fpu: Fix FNSAVE usage in eagerfpu mode
  x86/fpu: Fix math emulation in eager fpu mode

Pull x86 build update from Ingo Molnar:
 "A single adjustment of a defconfig value"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/defconfigs/32: Set CONFIG_FRAME_WARN to the Kconfig default

Pull x86 boot updates from Ingo Molnar:
 "Early command line options parsing enhancements from Dave Hansen, plus
  minor cleanups and enhancements"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Remove unused 'is_big_kernel' variable
  x86/boot: Use proper array element type in memset() size calculation
  x86/boot: Pass in size to early cmdline parsing
  x86/boot: Simplify early command line parsing
  x86/boot: Fix early command-line parsing when partial word matches
  x86/boot: Fix early command-line parsing when matching at end
  x86/boot: Simplify kernel load address alignment check
  x86/boot: Micro-optimize reset_early_page_tables()

Pull x86 asm updates from Ingo Molnar:
 "This is another big update. Main changes are:

   - lots of x86 system call (and other traps/exceptions) entry code
     enhancements.  In particular the complex parts of the 64-bit entry
     code have been migrated to C code as well, and a number of dusty
     corners have been refreshed.  (Andy Lutomirski)

   - vDSO special mapping robustification and general cleanups (Andy
     Lutomirski)

   - cpufeature refactoring, cleanups and speedups (Borislav Petkov)

   - lots of other changes ..."

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
  x86/cpufeature: Enable new AVX-512 features
  x86/entry/traps: Show unhandled signal for i386 in do_trap()
  x86/entry: Call enter_from_user_mode() with IRQs off
  x86/entry/32: Change INT80 to be an interrupt gate
  x86/entry: Improve system call entry comments
  x86/entry: Remove TIF_SINGLESTEP entry work
  x86/entry/32: Add and check a stack canary for the SYSENTER stack
  x86/entry/32: Simplify and fix up the SYSENTER stack #DB/NMI fixup
  x86/entry: Only allocate space for tss_struct::SYSENTER_stack if needed
  x86/entry: Vastly simplify SYSENTER TF (single-step) handling
  x86/entry/traps: Clear DR6 early in do_debug() and improve the comment
  x86/entry/traps: Clear TIF_BLOCKSTEP on all debug exceptions
  x86/entry/32: Restore FLAGS on SYSEXIT
  x86/entry/32: Filter NT and speed up AC filtering in SYSENTER
  x86/entry/compat: In SYSENTER, sink AC clearing below the existing FLAGS test
  selftests/x86: In syscall_nt, test NT|TF as well
  x86/asm-offsets: Remove PARAVIRT_enabled
  x86/entry/32: Introduce and use X86_BUG_ESPFIX instead of paravirt_enabled
  uprobes: __create_xol_area() must nullify xol_mapping.fault
  x86/cpufeature: Create a new synthetic cpu capability for machine check recovery
  ...

When booting Hyper-V Generation 2 guests KASAN reports the following
out-of-bounds access:

  BUG: KASAN: slab-out-of-bounds in fb_is_primary_device+0x58/0x70 at addr ffff880079cf0eb0
  Read of size 8 by task swapper/0/1
  ...
   [<ffffffff81581308>] dump_stack+0x63/0x8b
   [<ffffffff812e1f99>] print_trailer+0xf9/0x150
   [<ffffffff812e7344>] object_err+0x34/0x40
   [<ffffffff812e9630>] kasan_report_error+0x230/0x550
   [<ffffffff812e9ee8>] kasan_report+0x58/0x60
   [<ffffffff812e4500>] ? ___slab_alloc+0x80/0x490
   [<ffffffff81878a28>] ? fb_is_primary_device+0x58/0x70
   [<ffffffff812e87cd>] __asan_load8+0x5d/0x70
   [<ffffffff81878a28>] fb_is_primary_device+0x58/0x70
   [<ffffffff8162357a>] register_framebuffer+0xda/0x5b0
   [<ffffffff816234a0>] ? remove_conflicting_framebuffers+0x50/0x50
  ...

The issue is caused by the to_pci_dev() call with no check that the given
info->device is in fact a PCI device and some FB devices (Hyper-V FB, EFI
FB,...) are not.

While on it, clean up the function.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Cathy Avery <cavery@redhat.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1458030033-10122-1-git-send-email-vkuznets@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

 Conflicts:
	kernel/rcu/tree.c
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull NOHZ updates from Ingo Molnar:
 "NOHZ enhancements, by Frederic Weisbecker, which reorganizes/refactors
  the NOHZ 'can the tick be stopped?' infrastructure and related code to
  be data driven, and harmonizes the naming and handling of all the
  various properties"

[ This makes the ugly "fetch_or()" macro that the scheduler used
  internally a new generic helper, and does a bad job at it.

  I'm pulling it, but I've asked Ingo and Frederic to get this
  fixed up ]

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched-clock: Migrate to use new tick dependency mask model
  posix-cpu-timers: Migrate to use new tick dependency mask model
  sched: Migrate sched to use new tick dependency mask model
  sched: Account rr tasks
  perf: Migrate perf to use new tick dependency mask model
  nohz: Use enum code for tick stop failure tracing message
  nohz: New tick dependency mask
  nohz: Implement wide kick on top of irq work
  atomic: Export fetch_or()

Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle are:

   - Make schedstats a runtime tunable (disabled by default) and
     optimize it via static keys.

     As most distributions enable CONFIG_SCHEDSTATS=y due to its
     instrumentation value, this is a nice performance enhancement.
     (Mel Gorman)

   - Implement 'simple waitqueues' (swait): these are just pure
     waitqueues without any of the more complex features of full-blown
     waitqueues (callbacks, wake flags, wake keys, etc.).  Simple
     waitqueues have less memory overhead and are faster.

     Use simple waitqueues in the RCU code (in 4 different places) and
     for handling KVM vCPU wakeups.

     (Peter Zijlstra, Daniel Wagner, Thomas Gleixner, Paul Gortmaker,
     Marcelo Tosatti)

   - sched/numa enhancements (Rik van Riel)

   - NOHZ performance enhancements (Rik van Riel)

   - Various sched/deadline enhancements (Steven Rostedt)

   - Various fixes (Peter Zijlstra)

   - ... and a number of other fixes, cleanups and smaller enhancements"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
  sched/cputime: Fix steal_account_process_tick() to always return jiffies
  sched/deadline: Remove dl_new from struct sched_dl_entity
  Revert "kbuild: Add option to turn incompatible pointer check into error"
  sched/deadline: Remove superfluous call to switched_to_dl()
  sched/debug: Fix preempt_disable_ip recording for preempt_disable()
  sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity
  time, acct: Drop irq save & restore from __acct_update_integrals()
  acct, time: Change indentation in __acct_update_integrals()
  sched, time: Remove non-power-of-two divides from __acct_update_integrals()
  sched/rt: Kick RT bandwidth timer immediately on start up
  sched/debug: Add deadline scheduler bandwidth ratio to /proc/sched_debug
  sched/debug: Move sched_domain_sysctl to debug.c
  sched/debug: Move the /sys/kernel/debug/sched_features file setup into debug.c
  sched/rt: Fix PI handling vs. sched_setscheduler()
  sched/core: Remove duplicated sched_group_set_shares() prototype
  sched/fair: Consolidate nohz CPU load update code
  sched/fair: Avoid using decay_load_missed() with a negative value
  sched/deadline: Always calculate end of period on sched_yield()
  sched/cgroup: Fix cgroup entity load tracking tear-down
  rcu: Use simple wait queues where possible in rcutree
  ...

Pull RAS updates from Ingo Molnar:
 "Various RAS updates:

   - AMD MCE support updates for future CPUs, fixes and 'SMCA' (Scalable
     MCA) error decoding support (Aravind Gopalakrishnan)

   - x86 memcpy_mcsafe() support, to enable smart(er) hardware error
     recovery in NVDIMM drivers, based on an extension of the x86
     exception handling code.  (Tony Luck)"

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  EDAC/sb_edac: Fix computation of channel address
  x86/mm, x86/mce: Add memcpy_mcsafe()
  x86/mce/AMD: Document some functionality
  x86/mce: Clarify comments regarding deferred error
  x86/mce/AMD: Fix logic to obtain block address
  x86/mce/AMD, EDAC: Enable error decoding of Scalable MCA errors
  x86/mce: Move MCx_CONFIG MSR definitions
  x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries
  x86/mm: Expand the exception table logic to allow new handling options
  x86/mce/AMD: Set MCAX Enable bit
  x86/mce/AMD: Carve out threshold block preparation
  x86/mce/AMD: Fix LVT offset configuration for thresholding
  x86/mce/AMD: Reduce number of blocks scanned per bank
  x86/mce/AMD: Do not perform shared bank check for future processors
  x86/mce: Fix order of AMD MCE init function call

Pull perf updates from Ingo Molnar:
 "Main kernel side changes:

   - Big reorganization of the x86 perf support code.  The old code grew
     organically deep inside arch/x86/kernel/cpu/perf* and its naming
     became somewhat messy.

     The new location is under arch/x86/events/, using the following
     cleaner hierarchy of source code files:

       perf/x86: Move perf_event.c .................. => x86/events/core.c
       perf/x86: Move perf_event_amd.c .............. => x86/events/amd/core.c
       perf/x86: Move perf_event_amd_ibs.c .......... => x86/events/amd/ibs.c
       perf/x86: Move perf_event_amd_iommu.[ch] ..... => x86/events/amd/iommu.[ch]
       perf/x86: Move perf_event_amd_uncore.c ....... => x86/events/amd/uncore.c
       perf/x86: Move perf_event_intel_bts.c ........ => x86/events/intel/bts.c
       perf/x86: Move perf_event_intel.c ............ => x86/events/intel/core.c
       perf/x86: Move perf_event_intel_cqm.c ........ => x86/events/intel/cqm.c
       perf/x86: Move perf_event_intel_cstate.c ..... => x86/events/intel/cstate.c
       perf/x86: Move perf_event_intel_ds.c ......... => x86/events/intel/ds.c
       perf/x86: Move perf_event_intel_lbr.c ........ => x86/events/intel/lbr.c
       perf/x86: Move perf_event_intel_pt.[ch] ...... => x86/events/intel/pt.[ch]
       perf/x86: Move perf_event_intel_rapl.c ....... => x86/events/intel/rapl.c
       perf/x86: Move perf_event_intel_uncore.[ch] .. => x86/events/intel/uncore.[ch]
       perf/x86: Move perf_event_intel_uncore_nhmex.c => x86/events/intel/uncore_nmhex.c
       perf/x86: Move perf_event_intel_uncore_snb.c   => x86/events/intel/uncore_snb.c
       perf/x86: Move perf_event_intel_uncore_snbep.c => x86/events/intel/uncore_snbep.c
       perf/x86: Move perf_event_knc.c .............. => x86/events/intel/knc.c
       perf/x86: Move perf_event_p4.c ............... => x86/events/intel/p4.c
       perf/x86: Move perf_event_p6.c ............... => x86/events/intel/p6.c
       perf/x86: Move perf_event_msr.c .............. => x86/events/msr.c

     (Borislav Petkov)

   - Update various x86 PMU constraint and hw support details (Stephane
     Eranian)

   - Optimize kprobes for BPF execution (Martin KaFai Lau)

   - Rewrite, refactor and fix the Intel uncore PMU driver code (Thomas
     Gleixner)

   - Rewrite, refactor and fix the Intel RAPL PMU code (Thomas Gleixner)

   - Various fixes and smaller cleanups.

  There are lots of perf tooling updates as well.  A few highlights:

  perf report/top:

     - Hierarchy histogram mode for 'perf top' and 'perf report',
       showing multiple levels, one per --sort entry: (Namhyung Kim)

       On a mostly idle system:

         # perf top --hierarchy -s comm,dso

       Then expand some levels and use 'P' to take a snapshot:

         # cat perf.hist.0
         -  92.32%         perf
               58.20%         perf
               22.29%         libc-2.22.so
                5.97%         [kernel]
                4.18%         libelf-0.165.so
                1.69%         [unknown]
         -   4.71%         qemu-system-x86
                3.10%         [kernel]
                1.60%         qemu-system-x86_64 (deleted)
         +   2.97%         swapper
         #

     - Add 'L' hotkey to dynamicly set the percent threshold for
       histogram entries and callchains, i.e.  dynamicly do what the
       --percent-limit command line option to 'top' and 'report' does.
       (Namhyung Kim)

  perf mem:

     - Allow specifying events via -e in 'perf mem record', also listing
       what events can be specified via 'perf mem record -e list' (Jiri
       Olsa)

  perf record:

     - Add 'perf record' --all-user/--all-kernel options, so that one
       can tell that all the events in the command line should be
       restricted to the user or kernel levels (Jiri Olsa), i.e.:

         perf record -e cycles:u,instructions:u

       is equivalent to:

         perf record --all-user -e cycles,instructions

     - Make 'perf record' collect CPU cache info in the perf.data file header:

         $ perf record usleep 1
         [ perf record: Woken up 1 times to write data ]
         [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
         $ perf report --header-only -I | tail -10 | head -8
         # CPU cache info:
         #  L1 Data                 32K [0-1]
         #  L1 Instruction          32K [0-1]
         #  L1 Data                 32K [2-3]
         #  L1 Instruction          32K [2-3]
         #  L2 Unified             256K [0-1]
         #  L2 Unified             256K [2-3]
         #  L3 Unified            4096K [0-3]

       Will be used in 'perf c2c' and eventually in 'perf diff' to
       allow, for instance running the same workload in multiple
       machines and then when using 'diff' show the hardware difference.
       (Jiri Olsa)

     - Improved support for Java, using the JVMTI agent library to do
       jitdumps that then will be inserted in synthesized
       PERF_RECORD_MMAP2 events via 'perf inject' pointed to synthesized
       ELF files stored in ~/.debug and keyed with build-ids, to allow
       symbol resolution and even annotation with source line info, see
       the changeset comments to see how to use it (Stephane Eranian)

  perf script/trace:

     - Decode data_src values (e.g.  perf.data files generated by 'perf
       mem record') in 'perf script': (Jiri Olsa)

         # perf script
           perf 693 [1] 4.088652: 1 cpu/mem-loads,ldlat=30/P: ffff88007d0b0f40 68100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK No <SNIP>
                                                                              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
     - Improve support to 'data_src', 'weight' and 'addr' fields in
       'perf script' (Jiri Olsa)

     - Handle empty print fmts in 'perf script -s' i.e. when running
       python or perl scripts (Taeung Song)

  perf stat:

     - 'perf stat' now shows shadow metrics (insn per cycle, etc) in
       interval mode too.  E.g:

         # perf stat -I 1000 -e instructions,cycles sleep 1
         #         time   counts unit events
            1.000215928  519,620      instructions     #  0.69 insn per cycle
            1.000215928  752,003      cycles
         <SNIP>

     - Port 'perf kvm stat' to PowerPC (Hemant Kumar)

     - Implement CSV metrics output in 'perf stat' (Andi Kleen)

  perf BPF support:

     - Support converting data from bpf events in 'perf data' (Wang Nan)

     - Print bpf-output events in 'perf script': (Wang Nan).

         # perf record -e bpf-output/no-inherit,name=evt/ -e ./test_bpf_output_3.c/map:channel.event=evt/ usleep 1000
         # perf script
            usleep  4882 21384.532523:   evt:  ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
             BPF output: 0000: 52 61 69 73 65 20 61 20  Raise a
                         0008: 42 50 46 20 65 76 65 6e  BPF even
                         0010: 74 21 00 00              t!..
             BPF string: "Raise a BPF event!"
         #

     - Add API to set values of map entries in a BPF object, be it
       individual map slots or ranges (Wang Nan)

     - Introduce support for the 'bpf-output' event (Wang Nan)

     - Add glue to read perf events in a BPF program (Wang Nan)

     - Improve support for bpf-output events in 'perf trace' (Wang Nan)

  ... and tons of other changes as well - see the shortlog and git log
  for details!"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (342 commits)
  perf stat: Add --metric-only support for -A
  perf stat: Implement --metric-only mode
  perf stat: Document CSV format in manpage
  perf hists browser: Check sort keys before hot key actions
  perf hists browser: Allow thread filtering for comm sort key
  perf tools: Add sort__has_comm variable
  perf tools: Recalc total periods using top-level entries in hierarchy
  perf tools: Remove nr_sort_keys field
  perf hists browser: Cleanup hist_browser__fprintf_hierarchy_entry()
  perf tools: Remove hist_entry->fmt field
  perf tools: Fix command line filters in hierarchy mode
  perf tools: Add more sort entry check functions
  perf tools: Fix hist_entry__filter() for hierarchy
  perf jitdump: Build only on supported archs
  tools lib traceevent: Add '~' operation within arg_num_eval()
  perf tools: Omit unnecessary cast in perf_pmu__parse_scale
  perf tools: Pass perf_hpp_list all the way through setup_sort_list
  perf tools: Fix perf script python database export crash
  perf jitdump: DWARF is also needed
  perf bench mem: Prepare the x86-64 build for upstream memcpy_mcsafe() changes
  ...

Pull read-only kernel memory updates from Ingo Molnar:
 "This tree adds two (security related) enhancements to the kernel's
  handling of read-only kernel memory:

   - extend read-only kernel memory to a new class of formerly writable
     kernel data: 'post-init read-only memory' via the __ro_after_init
     attribute, and mark the ARM and x86 vDSO as such read-only memory.

     This kind of attribute can be used for data that requires a once
     per bootup initialization sequence, but is otherwise never modified
     after that point.

     This feature was based on the work by PaX Team and Brad Spengler.

     (by Kees Cook, the ARM vDSO bits by David Brown.)

   - make CONFIG_DEBUG_RODATA always enabled on x86 and remove the
     Kconfig option.  This simplifies the kernel and also signals that
     read-only memory is the default model and a first-class citizen.
     (Kees Cook)"

* 'mm-readonly-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ARM/vdso: Mark the vDSO code read-only after init
  x86/vdso: Mark the vDSO code read-only after init
  lkdtm: Verify that '__ro_after_init' works correctly
  arch: Introduce post-init read-only memory
  x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option
  mm/init: Add 'rodata=off' boot cmdline parameter to disable read-only kernel mappings
  asm-generic: Consolidate mark_rodata_ro()

Pull dma_*_writecombine rename from Ingo Molnar:
 "Rename dma_*_writecombine() to dma_*_wc()

  This is a tree-wide API rename, to move the dma_*() write-combining
  APIs closer in name to their usual API families.  (The old API names
  are kept as compatibility wrappers to not introduce extra breakage.)

  The patch was Coccinelle generated"

* 'mm-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc()

Pull locking changes from Ingo Molnar:
 "Various updates:

   - Futex scalability improvements: remove page lock use for shared
     futex get_futex_key(), which speeds up 'perf bench futex hash'
     benchmarks by over 40% on a 60-core Westmere.  This makes anon-mem
     shared futexes perform close to private futexes.  (Mel Gorman)

   - lockdep hash collision detection and fix (Alfredo Alvarez
     Fernandez)

   - lockdep testing enhancements (Alfredo Alvarez Fernandez)

   - robustify lockdep init by using hlists (Andrew Morton, Andrey
     Ryabinin)

   - mutex and csd_lock micro-optimizations (Davidlohr Bueso)

   - small x86 barriers tweaks (Michael S Tsirkin)

   - qspinlock updates (Waiman Long)"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
  locking/csd_lock: Use smp_cond_acquire() in csd_lock_wait()
  locking/csd_lock: Explicitly inline csd_lock*() helpers
  futex: Replace barrier() in unqueue_me() with READ_ONCE()
  locking/lockdep: Detect chain_key collisions
  locking/lockdep: Prevent chain_key collisions
  tools/lib/lockdep: Fix link creation warning
  tools/lib/lockdep: Add tests for AA and ABBA locking
  tools/lib/lockdep: Add userspace version of READ_ONCE()
  tools/lib/lockdep: Fix the build on recent kernels
  locking/qspinlock: Move __ARCH_SPIN_LOCK_UNLOCKED to qspinlock_types.h
  locking/mutex: Allow next waiter lockless wakeup
  locking/pvqspinlock: Enable slowpath locking count tracking
  locking/qspinlock: Use smp_cond_acquire() in pending code
  locking/pvqspinlock: Move lock stealing count tracking code into pv_queued_spin_steal_lock()
  locking/mcs: Fix mcs_spin_lock() ordering
  futex: Remove requirement for lock_page() in get_futex_key()
  futex: Rename barrier references in ordering guarantees
  locking/atomics: Update comment about READ_ONCE() and structures
  locking/lockdep: Eliminate lockdep_init()
  locking/lockdep: Convert hash tables to hlists
  ...

Pull ram resource handling changes from Ingo Molnar:
 "Core kernel resource handling changes to support NVDIMM error
  injection.

  This tree introduces a new I/O resource type, IORESOURCE_SYSTEM_RAM,
  for System RAM while keeping the current IORESOURCE_MEM type bit set
  for all memory-mapped ranges (including System RAM) for backward
  compatibility.

  With this resource flag it no longer takes a strcmp() loop through the
  resource tree to find "System RAM" resources.

  The new resource type is then used to extend ACPI/APEI error injection
  facility to also support NVDIMM"

* 'core-resources-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ACPI/EINJ: Allow memory error injection to NVDIMM
  resource: Kill walk_iomem_res()
  x86/kexec: Remove walk_iomem_res() call with GART type
  x86, kexec, nvdimm: Use walk_iomem_res_desc() for iomem search
  resource: Add walk_iomem_res_desc()
  memremap: Change region_intersects() to take @flags and @desc
  arm/samsung: Change s3c_pm_run_res() to use System RAM type
  resource: Change walk_system_ram() to use System RAM type
  drivers: Initialize resource entry to zero
  xen, mm: Set IORESOURCE_SYSTEM_RAM to System RAM
  kexec: Set IORESOURCE_SYSTEM_RAM for System RAM
  arch: Set IORESOURCE_SYSTEM_RAM flag for System RAM
  ia64: Set System RAM type and descriptor
  x86/e820: Set System RAM type and descriptor
  resource: Add I/O resource descriptor
  resource: Handle resource flags properly
  resource: Add System RAM resource type

Pull irqchip core changes from Jason Cooper:

- mvebu: Update dt binding docs for new odmi driver

Pull MIPS fixes from Ralf Baechle:
 "Another round of MIPS fixes for 4.5:

   - Fix JZ4780 build with DEBUG_ZBOOT and MACH_JZ4780
   - Fix build with DEBUG_ZBOOT and MACH_JZ4780
   - Fix issue with uninitialised temp_foreign_map
   - Fix awk regex compile failure with certain versions of awk.  At
     this time, the sole user, ld-ifversion, is only used on MIPS"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: smp.c: Fix uninitialised temp_foreign_map
  MIPS: Fix build error when SMP is used without GIC
  ld-version: Fix awk regex compile failure
  MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4780

When calculate_cpu_foreign_map() recalculates the cpu_foreign_map
cpumask it uses the local variable temp_foreign_map without initialising
it to zero. Since the calculation only ever sets bits in this cpumask
any existing bits at that memory location will remain set and find their
way into cpu_foreign_map too. This could potentially lead to cache
operations suboptimally doing smp calls to multiple VPEs in the same
core, even though the VPEs share primary caches.

Therefore initialise temp_foreign_map using cpumask_clear() before use.

Fixes: cccf34e9 ("MIPS: c-r4k: Fix cache flushing for MT cores")
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12759/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The MIPS_GIC_IPI should only be selected when MIPS_GIC is also
selected, otherwise it results in a compile error. smp-gic.c uses some
functions from include/linux/irqchip/mips-gic.h like
plat_ipi_call_int_xlate() which are only added to the header file when
MIPS_GIC is set. The Lantiq SoC does not use the GIC, but supports SMP.
The calls top the functions from smp-gic.c are already protected by
some #ifdefs

The first part of this was introduced in commit 72e20142 ("MIPS:
Move GIC IPI functions out of smp-cmp.c")
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: stable@vger.kernel.org # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12774/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The ld-version.sh script fails on some versions of awk with the
following error, resulting in build failures for MIPS:

awk: scripts/ld-version.sh: line 4: regular expression compile failed (missing '(')

This is due to the regular expression ".*)", meant to strip off the
beginning of the ld version string up to the close bracket, however
brackets have a meaning in regular expressions, so lets escape it so
that awk doesn't expect a corresponding open bracket.

Fixes: ccbef167 ("Kbuild, lto: add ld-version and ld-ifversion ...")
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Tested-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: Michal Marek <mmarek@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kbuild@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 4.4.x-
Patchwork: https://patchwork.linux-mips.org/patch/12838/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>