- 02 6月, 2014 2 次提交
-
-
由 Xiubo Li 提交于
Since we cannot make sure the 'reg_size' will always be none zero here, and then if 'reg_size' equals to zero, the kzalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just doing the 'reg_size' zero check before calling kzalloc(). Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
This is useful if we have a pointer to a DAPM context and know that it is a CODEC or platform DAPM context and want to get a pointer to the CODEC or platform. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 14 5月, 2014 1 次提交
-
-
由 Dan Carpenter 提交于
The return statement was not indented correctly. I lined up the condition a bit as well. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 13 5月, 2014 2 次提交
-
-
由 Lars-Peter Clausen 提交于
This was initially removed in commit 6423c187 ("ASoC: Remove runtime field from DAI"), but was, presumably by accident, brought back in commit f0fba2ad ("ASoC: multi-component - ASoC Multi-Component Support"). But has never been initialized to anything but NULL ever since. This commit removes it again. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
Suspend/resume support for the atmel-pcm-pdc driver was broken in commit f0fba2ad ("ASoC: multi-component - ASoC Multi-Component Support"). It essentially reverted the modifications done in commit 10cab262 ("ASoC: Change how suspend and resume obtain the PCM runtime"). The suspend and resume handlers at the beginning check if dai->runtime is not NULL, but dai->runtime is always NULL, hence the code never runs. Considering that nobody noticed any problems in the last 4 years since the code was broken and that the driver does not set SNDRV_PCM_INFO_RESUME, which means applications are expected to stop and restart the audio stream during suspend/resume, it is probably safe to assume that his code is not needed and can be removed. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 07 5月, 2014 4 次提交
-
-
由 Lars-Peter Clausen 提交于
Commit d191bd8d ("ASoC: snd_soc_codec includes snd_soc_component") removed the last user of the num_dai field. Also remove the field itself. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
The global card list was removed in commit b19e6e7b ("ASoC: core: Use driver core probe deferral"). The 'list' field of the snd_soc_card struct has been unused since then. This patch removes the field. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
Commit f0fba2ad ("ASoC: multi-component - ASoC Multi-Component Support") added a per card list that keeps track of all the DAIs that have been registered with the card, but the list has never been used. This patch removes it again. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Mark Brown 提交于
Merge branch 'topic/component' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-core
-
- 03 5月, 2014 1 次提交
-
-
由 Vinod Koul 提交于
we need _EXT version for SND_SOC_BYTES so that DSPs can use this to pass data for DSP modules Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 30 4月, 2014 1 次提交
-
-
由 Jarkko Nikula 提交于
This fixes module unload regressions introduced by commits 98e639fb ("ASoC: Track which components have been registered with snd_soc_register_component()") and b37f1d12 ("ASoC: Let snd_soc_platform subclass snd_soc_component"). First commit causes component_list to be corrupted when removing codec and second when removing platform. Reason for both is that components associated with platform or codec are never removed from the list because for them registered_as_component field in struct snd_soc_component is always false. Now list becomes corrupted when snd_soc_unregister_platform() or snd_soc_unregister_codec() frees the platform or codec structure and where the associated struct snd_soc_component is embedded. Fix these by moving component unregistration and cleanup to a new local function __snd_soc_unregister_component() that takes component as its argument. Since component is known for platforms and codecs the __snd_soc_unregister_component() can be called directly and snd_soc_unregister_component() takes care to find and unregister only components that were registered using snd_soc_register_component(). Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 23 4月, 2014 1 次提交
-
-
由 Nicolin Chen 提交于
The commit e41975ed (ASoC: core: Fix the DAI name getting) added a break within the "if (id < 0 || id >= pos->num_dai)" while the original design of the search didn't break the loop if that condition contented but only mark the ret error and let it go on to search the next component. In a case like dmaengine which's not a dai but as a component sharing an identical name with a dai, both the id and pos->num_dai here could be 0. If we break the search, we may never find the dai we want as it might be placed behind its dmaengine in the component list. So this patch fixes the issue above by following the original design to let the search carry on. Signed-off-by: NNicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 22 4月, 2014 7 次提交
-
-
由 Lars-Peter Clausen 提交于
After moving the IO layer inside ASoC to the component level we can now easily move the standard control helpers also to the component level. This allows to reuse the same standard helper control implementations for other components. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Mark Brown 提交于
Merge branch 'topic/multicodec' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-component
-
由 Lars-Peter Clausen 提交于
The ASoC framework is in the process of migrating all IO operations to regmap. regmap has its own more sophisticated tracing infrastructure for IO operations, which means that the ASoC level IO tracing becomes redundant, hence this patch removes them. There are still a handful of ASoC drivers left that do not use regmap yet, but hopefully the removal of the ASoC IO tracing will be an additional incentive to switch to regmap. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
There is no unlocked version of soc_widget_update_bits_locked() and there is no plan to introduce it in the near future, so drop the _locked suffix. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
There are no users of snd_soc_update_bits_locked() left and it is identical to snd_soc_update_bits(). So it can be removed. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
We currently have two very similar IO abstractions in ASoC, one for CODECs, the other for platforms. Moving this to the component level will allow us to unify those two. It will also enable us to move the standard kcontrol helpers as well as DAPM support to the component level. The new component level abstraction layer is primarily build around regmap. There is a per component pointer for the regmap instance for the underlying device. There are four new function snd_soc_component_read(), snd_soc_component_write(), snd_soc_component_update_bits() and snd_soc_component_update_bits_async(). They have the same signature as their regmap counter-part and will internally forward the call one-to-one to regmap. If the component it not using regmap it will fallback to using the custom IO callbacks. This is done to be able to support drivers that haven't been converted to regmap yet, but it is expected that this will eventually be removed in the future once all component drivers have been converted to regmap. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Mark Brown 提交于
Merge branches 'topic/sta350', 'topic/core', 'topic/dapm' and 'topic/cache' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-component
-
- 21 4月, 2014 2 次提交
-
-
由 Lars-Peter Clausen 提交于
The CODEC's write callback can return a negative error code, make sure to pass that on correctly. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
In preparation for componentisation of the kcontrol helpers use snd_soc_kcontrol_codec() instead of snd_kcontrol_chip(). Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 19 4月, 2014 1 次提交
-
-
由 Christoph Jaeger 提交于
PTR_RET is deprecated. PTR_ERR_OR_ZERO should be used instead. However, we already know that IS_ERR is true, and thus PTR_ERR_OR_ZERO would never yield zero, so we can use PTR_ERR here. Signed-off-by: NChristoph Jaeger <christophjaeger@linux.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 18 4月, 2014 1 次提交
-
-
由 Bard Liao 提交于
This patch change reg's type from unsigned short to int. Signed-off-by: NBard Liao <bardliao@realtek.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 16 4月, 2014 1 次提交
-
-
由 Lars-Peter Clausen 提交于
This should obviously be snd_soc_platform * and not snd_soc_codec * Fixes: f6272ff8 ("ASoC: Add snd_soc_kcontrol_platform() helper function") Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 15 4月, 2014 16 次提交
-
-
由 Misael Lopez Cruz 提交于
Add codec registration specific function in preparation for DAI-multicodec support. No functional change. Signed-off-by: NMisael Lopez Cruz <misael.lopez@ti.com> [fparent@baylibre.com: Adapt to 3.14+] Signed-off-by: NFabien Parent <fparent@baylibre.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Misael Lopez Cruz 提交于
Add a helper for DAI widgets linking in preparation for DAI-multicodec support. No functional change. Signed-off-by: NMisael Lopez Cruz <misael.lopez@ti.com> [fparent@baylibre.com: Adapt to 3.14+] Signed-off-by: NFabien Parent <fparent@baylibre.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Misael Lopez Cruz 提交于
Add helper functions for codec DAI probe and remove in preparation for DAI-multicodec support. No functional change. Signed-off-by: NMisael Lopez Cruz <misael.lopez@ti.com> [fparent@baylibre.com: Adapt to 3.14+] Signed-off-by: NFabien Parent <fparent@baylibre.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Misael Lopez Cruz 提交于
Add dedicated helpers for codec and codec_dai search in preparation for DAI-multicodec. It will help reducing the extra indentation that will be introduced by the iteration over multiple codecs. Previous implementation unnecessarily kept searching for a matching codec in the remaining register codecs even if it was already found. Fix that by returning in case of matching. Signed-off-by: NMisael Lopez Cruz <misael.lopez@ti.com> [fparent@baylibre.com: Adapt to 3.14+] Signed-off-by: NFabien Parent <fparent@baylibre.com> Signed-off-by: NBenoit Cousson <bcousson@baylibre.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Mark Brown 提交于
Merge branch 'topic/component' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-core Conflicts: sound/soc/soc-core.c
-
由 Sven Brandau 提交于
The TI STA350 is an integrated 2.1-channel power amplifier that is controllable over I2C. This patch adds an ASoC driver for it. At a glance, this chip is very similar to the STA320 for which a driver already exists. In details, however, the register maps contain subtle differences which made a whole new driver easier to write and maintain. [daniel@zonque.org: cleanups, DT property rework, rebased on asoc-next] Signed-off-by: NSven Brandau <brandau@gmx.de> Signed-off-by: NDaniel Mack <daniel@zonque.org> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Bard Liao 提交于
Change reg's type from unsigned short to unsigned int. So that we can use 32 bits reg value in snd_soc_update_bits. Signed-off-by: NBard Liao <bardliao@realtek.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Nariman Poushin 提交于
Signed-off-by: NNariman Poushin <nariman@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Nariman Poushin 提交于
Signed-off-by: NNariman Poushin <nariman@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
There is an increasing amount of code that is very similar between platforms, CODECS and other components. Making platforms a component will allow us to share this code. For now the patch just adds component and component_driver fields to the platform and platform_driver structs and registers the platform as a component. Followup patches will be used to consolidate code between the different types of components. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
snd_soc_unregister_component() takes the parent device of the component as a parameter and then looks up the component based on this. This is a problem if multiple components are registered for the same parent device. Currently drivers do not do this, but some drivers register a CPU DAI component and a platform for the same parent device. This will become a problem once platforms are also made components. To make sure that snd_soc_unregister_component() will not accidentally unregister the platform in such a case only consider components that were registered with snd_soc_register_component(). This is only meant as short term stopgap solution to be able to continue componentisation. Long term we'll need something different. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
There are no ASoC drivers left that use them and new drivers are supposed to use regmap for this. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
soc-core.c is getting quite crowded. Move all IO related functions that are still in soc-core.c to soc-io.c Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
SOC_SINGLE_XR_SX controls currently only work with CODECs that set the 'reg_word_size' field in their snd_soc_codec_driver struct. Going forward support for ASoC level IO will eventually be removed and all drivers will be converted to regmap. Preparing for the transition this patch adds support for CODECs using regmap for IO to the SOC_SINGLE_XR_SX control. We already have the val_bytes field in the CODEC struct which holds the number of bytes per word, but it is only initialized when regmap is used. Also initialize it for drivers still using legacy IO and update the SOC_SINGLE_XR_SX handlers to use it. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
For platform controls snd_kcontrol_chip() currently returns a pointer to the platform that registered the control. With the upcoming consolidation of platform and CODEC controls this will change. Prepare for this by introducing the snd_soc_kcontrol_platform() helper function that will hide the implementation details of how the platform for a control can be obtained. This will allow us to change this easily in the future. The patch also updates all platforms to use this new helper function. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
For CODEC controls snd_kcontrol_chip() currently returns a pointer to the CODEC that registered the control. With the upcoming consolidation of platform and CODEC controls this will change. Prepare for this by introducing the snd_soc_kcontrol_codec() helper function that will hide the implementation details of how the CODEC for a control can be obtained. This will allow us to change this easily in the future. The patch also updates all CODEC drivers to use the new helper function. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-