- 17 3月, 2009 1 次提交
-
-
由 Jouni Malinen 提交于
Incorrect local->wmm_acm bits were set for AC_BK and AC_BE. Fix this and add some comments to make it easier to understand the AC-to-UP(pair) mapping. Set the wmm_acm bits (and show WMM debug) even if the driver does not implement conf_tx() handler. In addition, fix the ACM-based AC downgrade code to not use the highest priority in error cases. We need to break the loop to get the correct AC_BK value (3) instead of returning 0 (which would indicate AC_VO). The comment here was not really very useful either, so let's provide somewhat more helpful description of the situation. Since it is very unlikely that the ACM flag would be set for AC_BK and AC_BE, these bugs are not likely to be seen in real life networks. Anyway, better do these things correctly should someone really use silly AP configuration (and to pass some functionality tests, too). Remove the TODO comment about handling ACM. Downgrading AC is perfectly valid mechanism for ACM. Eventually, we may add support for WMM-AC and send a request for a TS, but anyway, that functionality won't be here at the location of this TODO comment. Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 2月, 2009 1 次提交
-
-
由 Johannes Berg 提交于
Hardware with AMPDU queues currently has broken aggregation. This patch fixes it by making all A-MPDUs go over the regular AC queues, but keeping track of the hardware queues in mac80211. As a first rough version, it actually stops the AC queue for extended periods of time, which can be removed by adding buffering internal to mac80211, but is currently not a huge problem because people rarely use multiple TIDs that are in the same AC (and iwlwifi currently doesn't operate as AP). This is a short-term fix, my current medium-term plan, which I hope to execute soon as well, but am not sure can finish before .30, looks like this: 1) rework the internal queuing layer in mac80211 that we use for fragments if the driver stopped queue in the middle of a fragmented frame to be able to queue more frames at once (rather than just a single frame with its fragments) 2) instead of stopping the entire AC queue, queue up the frames in a per-station/per-TID queue during aggregation session initiation, when the session has come up take all those frames and put them onto the queue from 1) 3) push the ampdu queue layer abstraction this patch introduces in mac80211 into the driver, and remove the virtual queue stuff from mac80211 again This plan will probably also affect ath9k in that mac80211 queues the frames instead of passing them down, even when there are no ampdu queues. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 01 11月, 2008 1 次提交
-
-
由 Sujith 提交于
Wireless HW without any dedicated queues for aggregation do not need the ampdu_queues mechanism present right now in mac80211. Since mac80211 is still incomplete wrt TX MQ changes, do not allow aggregation sessions for drivers that set ampdu_queues. This is only an interim hack until Intel fixes the requeue issue. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NLuis Rodriguez <Luis.Rodriguez@Atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 10月, 2008 1 次提交
-
-
由 Johannes Berg 提交于
Also remove a few stray DECLARE_MAC_BUF that were no longer used at all. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 10月, 2008 1 次提交
-
-
由 Johannes Berg 提交于
In "mac80211: make master iface not wireless" I accidentally forgot to include these changes ... leading to the expected BUG_ON errors. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 21 9月, 2008 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 9月, 2008 1 次提交
-
-
由 Johannes Berg 提交于
This patch changes mac80211 to share some more data about stations with drivers. Should help iwlwifi and ath9k when they get around to updating, and might also help with implementing rate control algorithms without internals. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 30 8月, 2008 1 次提交
-
-
由 Daniel Wagner 提交于
Bit 4-5 of DSCP should not be considered by classify_d1. The 802.11 QoS Priority field is only depending on the precedence level. Signed-off-by: NDaniel Wagner <wagi@monom.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 03 8月, 2008 1 次提交
-
-
由 David S. Miller 提交于
qdisc_root_lock() is only %100 safe to use when the RTNL semaphore is held. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 7月, 2008 1 次提交
-
-
由 Johannes Berg 提交于
This patch fixes mac80211 to not use the skb->cb over the queue step from virtual interfaces to the master. The patch also, for now, disables aggregation because that would still require requeuing, will fix that in a separate patch. There are two other places (software requeue and powersaving stations) where requeue can happen, but that is not currently used by any drivers/not possible to use respectively. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 20 7月, 2008 1 次提交
-
-
由 Jussi Kivilinna 提交于
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 7月, 2008 3 次提交
-
-
由 David S. Miller 提交于
We can simply use the qdisc->q.lock for all of the qdisc tree synchronization. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The only behavior change is that we do not drop packets under any circumstances. If that is absolutely needed, we could easily add it back. With cleanups and help from Johannes Berg. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
alloc_netdev_mq() now allocates an array of netdev_queue structures for TX, based upon the queue_count argument. Furthermore, all accesses to the TX queues are now vectored through the netdev_get_tx_queue() and netdev_for_each_tx_queue() interfaces. This makes it easy to grep the tree for all things that want to get to a TX queue of a net device. Problem spots which are not really multiqueue aware yet, and only work with one queue, can easily be spotted by grepping for all netdev_get_tx_queue() calls that pass in a zero index. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 7月, 2008 5 次提交
-
-
由 David S. Miller 提交于
Now qdisc, qdisc_sleeping, and qdisc_list also live there. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The lock is now an attribute of the device queue. One thing to notice is that "suspicious" places emerge which will need specific training about multiple queue handling. They are so marked with explicit "netdev->rx_queue" and "netdev->tx_queue" references. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
It can be obtained via the netdev_queue. So create a helper routine, qdisc_dev(), to make the transformations nicer looking. Now, qdisc_alloc() now no longer needs a net_device pointer argument. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
A netdev_queue is an entity managed by a qdisc. Currently there is one RX and one TX queue, and a netdev_queue merely contains a backpointer to the net_device. The Qdisc struct is augmented with a netdev_queue pointer as well. Eventually the 'dev' Qdisc member will go away and we will have the resulting hierarchy: net_device --> netdev_queue --> Qdisc Also, qdisc_alloc() and qdisc_create_dflt() now take a netdev_queue pointer argument. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
Also remove the WLAN_IS_QOS_DATA inline after removing the last two users. This starts moving away from using rx->fc to using the header frame_control directly. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 08 7月, 2008 1 次提交
-
-
由 Tomas Winkler 提交于
This patch removes useless tid assignment for management and control frames Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 03 7月, 2008 1 次提交
-
-
由 Johannes Berg 提交于
This patch reworks the mac80211 debug settings making them more focused and adding help text for those that didn't have one. It also removes a number of printks that can be triggered remotely and add no value, e.g. "too short deauthentication frame received - ignoring". If somebody really needs to debug that they should just add a monitor interface and look at the frames in wireshark. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 02 7月, 2008 1 次提交
-
-
由 Patrick McHardy 提交于
Pass double tcf_proto pointers to tcf_destroy_chain() to make it clear the start of the filter list for more consistency. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 6月, 2008 1 次提交
-
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 14 6月, 2008 1 次提交
-
-
由 Tomas Winkler 提交于
This patch adds '\n' in debug printk (wme.c HT DEBUG) Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 22 5月, 2008 2 次提交
-
-
由 Johannes Berg 提交于
This patch updates mac80211 and drivers to be multi-queue aware and use that instead of the internal queue mapping. Also does a number of cleanups in various pieces of the code that fall out and reduces internal mac80211 state size. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch converts mac80211 and all drivers to have transmit information and status in skb->cb rather than allocating extra memory for it and copying all the data around. To make it fit, a union is used where only data that is necessary for all steps is kept outside of the union. A number of fixes were done by Ivo, as well as the rt2x00 part of this patch. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 13 5月, 2008 1 次提交
-
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 08 5月, 2008 3 次提交
-
-
由 Johannes Berg 提交于
In commit e100bb64 (mac80211: QoS related cleanups) I accidentally changed a variable from int to u16 causing a warning that a comparison for < 0 was always false. John thought this was a missing deletion of code and removed the warning by deleting the never executed branch of code in commit 3df5ee60 (wireless: fix warning introduced by "mac80211: QoS related cleanups") but the problem really was my mistake of using a u16 variable for the queue variable when that variable can also contain an error code. This patch restores the original code and variable type. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
net/mac80211/wme.c: In function ‘wme_qdiscop_enqueue’: net/mac80211/wme.c:219: warning: comparison is always false due to limited range of data type drivers/net/wireless/p54/p54common.c: In function ‘p54_conf_tx’: drivers/net/wireless/p54/p54common.c:947: warning: comparison is always false due to limited range of data type Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This * makes the queue number passed to drivers a u16 (as it will be with skb_get_queue_mapping) * removes the useless queue number defines * splits hw->queues into hw->queues/ampdu_queues * removes the debugfs files for per-queue counters * removes some dead QoS code * removes the beacon queue configuration for IBSS so that the drivers now never get a queue number bigger than (hw->queues + hw->ampdu_queues - 1) for tx and only in the range 0..hw->queues-1 for conf_tx. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 24 4月, 2008 1 次提交
-
-
由 Ron Rindjunsky 提交于
This patch fixes use of Qdisc length in requeue function, before we checked the reference is valid. (Adrian Bunk's catch) Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 07 3月, 2008 1 次提交
-
-
由 Johannes Berg 提交于
This makes access to the STA hash table/list use RCU to protect against freeing of items. However, it's not a true RCU, the copy step is missing: whenever somebody changes a STA item it is simply updated. This is an existing race condition that is now somewhat understandable. This patch also fixes the race key freeing vs. STA destruction by making sure that sta_info_destroy() is always called under RTNL and frees the key. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 01 3月, 2008 2 次提交
-
-
由 Ron Rindjunsky 提交于
This fix allows to control the number of bits that qdiscs book keeping can be done for with respect to the qdisc pool Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch allows qdisc support in A-MPDU Tx. a method to handle QoS <-> TID switches is present in this patch. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 29 1月, 2008 4 次提交
-
-
由 Patrick McHardy 提交于
Convert packet schedulers to use the netlink API. Unfortunately a gradual conversion is not possible without breaking compilation in the middle or adding lots of casts, so this patch converts them all in one step. The patch has been mostly generated automatically with some minor edits to at least allow seperate conversion of classifiers and actions. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guy Cohen 提交于
This patch assigns correct TID to frames transmitted between two stations in the same BSS in AP mode. The problem is that skb->protocol is not set to ETH_P_IP and it is wrong to use that field at this stage. The fix compares the LLC/Protocol headers explicitly to check if the encapsulated frame is IP frame Signed-off-by: NGuy Cohen <guy.cohen@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Qdisc_class_ops are const, and Qdisc_ops are mostly read. Using "const" and "__read_mostly" qualifiers helps to reduce false sharing. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 10月, 2007 2 次提交
-
-
由 Johannes Berg 提交于
Removes the management interface since it is only required for hostapd/userspace MLME, will not be in the final tree at least in this form and hostapd/userspace MLME currently do not work against this tree anyway. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
This cleans up some whitespace to make the mac80211 version in mainline diverge less from wireless-dev. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-