- 04 12月, 2012 1 次提交
-
-
由 Stephen Warren 提交于
The current rules have the .dtb files build in a different directory from the .dts files. This patch changes c6x to use the generic dtb rule which builds .dtb files in the same directory as the source .dts. This requires moving parts of arch/c6x/boot/Makefile into newly created arch/c6x/boot/dts/Makefile, and updating arch/c6x/Makefile to call the new Makefile. linked_dtb.S is also moved into boot/dts/ since it's used by rules that were moved. Acked-by: NMark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: linux-c6x-dev@linux-c6x.org Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
- 29 11月, 2012 2 次提交
-
-
由 Mark Salter 提交于
Signed-off-by: NMark Salter <msalter@redhat.com>
-
由 Mark Salter 提交于
Some internal kernel symbols were referenced in the exported setup.h. This splits out the internal bits from the exported uapi bits. Signed-off-by: NMark Salter <msalter@redhat.com>
-
- 27 11月, 2012 2 次提交
-
-
由 Mark Salter 提交于
A comment in entry.S incorrectly stated that interrupt vectors called __do_IRQ() and that int6 vector was used for syscalls. Both statements are incorrect for the current kernel, so this patch cleans up the wording to reflect current reality. Signed-off-by: NMark Salter <msalter@redhat.com>
-
由 Mark Salter 提交于
C6x was mistakenly running do_notify_resume with interrupts disabled. This would triggerlead to a warning in local_bh_enable() because interrupts were disabled: ------------[ cut here ]------------ WARNING: at /es/linux/linux-next/kernel/softirq.c:160 local_bh_enable+0x5c/0x10c() Modules linked in: e02f384d e002cda8 e02f3469 e02f384d 000000a0 e00363fc e01cce58 e5005c00 e0327986 00000000 e63c0aec 00000164 e00363fc 00000000 fffffffe e5005c00 e61fde00 e0268184 00000134 e01c91dc 00000001 fffffffe 00000000 10000100 e01c80e4 e5005c00 00000000 00000000 00000000 e63c0aec e526ce00 10000100 e628f920 e63c0a88 e6010410 e6449750 e5005c20 00000000 00000000 e63c0a80 e5005c20 e01c8590 e63c0a80 e5005c20 e63c0aec e00a0554 e009c758 e639e860 irq_spurious_proc_fops+0x6ad/0x3438 warn_slowpath_common+0x8c/0xb8 irq_spurious_proc_fops+0x2c9/0x3438 irq_spurious_proc_fops+0x6ad/0x3438 local_bh_enable+0x5c/0x10c sk_alloc+0x34/0xa4 local_bh_enable+0x5c/0x10c unix_release_sock+0x5c/0x2a0 sys_connect+0x94/0xd4 sock_release+0x38/0x104 sock_close+0x3c/0x54 __fput+0x154/0x2ec filp_close+0xc0/0xe4 task_work_run+0xdc/0x12c sys_close+0x2c/0x74 resume_userspace+0x0/0x30 ---[ end trace a70cbd610ae1f6b4 ]--- This patch enables interrupts before calling do_notify_resume(). Signed-off-by: NMark Salter <msalter@redhat.com>
-
- 10 10月, 2012 1 次提交
-
-
由 David Howells 提交于
Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com> Signed-off-by: NMark Salter <msalter@redhat.com>
-
- 06 10月, 2012 1 次提交
-
-
由 Jiri Kosina 提交于
Historically, the top three bytes of personality have been used for things such as ADDR_NO_RANDOMIZE, which made sense only for specific architectures. We now however have a flag there that is general no matter the architecture (UNAME26); generally we have to be careful to preserve the personality flags across exec(). This patch tries to fix all architectures that forcefully overwrite personality flags during exec() (ppc32 and s390 have been fixed recently by commits f9783ec8 ("[S390] Do not clobber personality flags on exec") and 59e4c3a2 ("powerpc/32: Don't clobber personality flags on exec") in a similar way already). Signed-off-by: NJiri Kosina <jkosina@suse.cz> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 10月, 2012 1 次提交
-
-
由 Mark Salter 提交于
The c6x signal.h includes the asm-generic version and provides a couple of extern declarations. David Howells pointed out that the externs needed to be protected by ifdef __KERNEL__. As it turns out, the externs aren't really needed since the functions are only called from asm code. So this patch gets rid of the c6x signal.h and uses just the asm-generic version. Signed-off-by: NMark Salter <msalter@redhat.com>
-
- 04 10月, 2012 2 次提交
-
-
由 David Howells 提交于
asm-generic/unistd.h and a number of asm/unistd.h files have been given reinclusion guards that allow the guard to be overridden if __SYSCALL is defined. Unfortunately, these files define __SYSCALL and don't undefine it when they've finished with it, thus rendering the guard ineffective. The reason for this override is to allow the file to be #included multiple times with different settings on __SYSCALL for purposes like generating syscall tables. The following guards are problematic: arch/arm64/include/asm/unistd.h:#if !defined(__ASM_UNISTD_H) || defined(__SYSCALL) arch/arm64/include/asm/unistd32.h:#if !defined(__ASM_UNISTD32_H) || defined(__SYSCALL) arch/c6x/include/asm/unistd.h:#if !defined(_ASM_C6X_UNISTD_H) || defined(__SYSCALL) arch/hexagon/include/asm/unistd.h:#if !defined(_ASM_HEXAGON_UNISTD_H) || defined(__SYSCALL) arch/openrisc/include/asm/unistd.h:#if !defined(__ASM_OPENRISC_UNISTD_H) || defined(__SYSCALL) arch/score/include/asm/unistd.h:#if !defined(_ASM_SCORE_UNISTD_H) || defined(__SYSCALL) arch/tile/include/asm/unistd.h:#if !defined(_ASM_TILE_UNISTD_H) || defined(__SYSCALL) arch/unicore32/include/asm/unistd.h:#if !defined(__UNICORE_UNISTD_H__) || defined(__SYSCALL) include/asm-generic/unistd.h:#if !defined(_ASM_GENERIC_UNISTD_H) || defined(__SYSCALL) On the assumption that the guards' ineffectiveness has passed unnoticed, just remove these guards entirely. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Mark Salter 提交于
C6X had no defconfig, so DSK6455 is as good as any. Signed-off-by: NMark Salter <msalter@redhat.com>
-
- 03 10月, 2012 1 次提交
-
-
由 David Howells 提交于
Set up empty UAPI Kbuild files to be populated by the header splitter. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com>
-
- 01 10月, 2012 5 次提交
-
-
由 Al Viro 提交于
Make default just return 0. The current default (checking TIF_POLLING_NRFLAG) is taken to architectures that need it; ones that don't do polling in their idle threads don't need to defined TIF_POLLING_NRFLAG at all. ia64 defined both TS_POLLING (used by its tsk_is_polling()) and TIF_POLLING_NRFLAG (not used at all). Killed the latter... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Mark Salter 提交于
Signed-off-by: NMark Salter <msalter@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Mark Salter 提交于
Signed-off-by: NMark Salter <msalter@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Mark Salter 提交于
Signed-off-by: NMark Salter <msalter@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 28 9月, 2012 1 次提交
-
-
由 David Howells 提交于
Use the mapping of Elf_[SPE]hdr, Elf_Addr, Elf_Sym, Elf_Dyn, Elf_Rel/Rela, ELF_R_TYPE() and ELF_R_SYM() to either the 32-bit version or the 64-bit version into asm-generic/module.h for all arches bar MIPS. Also, use the generic definition mod_arch_specific where possible. To this end, I've defined three new config bools: (*) HAVE_MOD_ARCH_SPECIFIC Arches define this if they don't want to use the empty generic mod_arch_specific struct. (*) MODULES_USE_ELF_RELA Arches define this if their modules can contain RELA records. This causes the Elf_Rela mapping to be emitted and allows apply_relocate_add() to be defined by the arch rather than have the core emit an error message. (*) MODULES_USE_ELF_REL Arches define this if their modules can contain REL records. This causes the Elf_Rel mapping to be emitted and allows apply_relocate() to be defined by the arch rather than have the core emit an error message. Note that it is possible to allow both REL and RELA records: m68k and mips are two arches that do this. With this, some arch asm/module.h files can be deleted entirely and replaced with a generic-y marker in the arch Kbuild file. Additionally, I have removed the bits from m32r and score that handle the unsupported type of relocation record as that's now handled centrally. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
- 25 9月, 2012 1 次提交
-
-
由 Mark Salter 提交于
A recent patch in the linux-next tree caused a build failure on C6X because C6X didn't define a read_barrier_depends() macro. C6X does not support SMP and the architecture doesn't provide any special memory ordering instructions, so it makes sense to just use the generic barrier.h rather than patching the existing c6x specific header. Signed-off-by: NMark Salter <msalter@redhat.com>
-
- 20 9月, 2012 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 16 8月, 2012 2 次提交
-
-
由 Mark Salter 提交于
The generic atomic64 support came in 2009 to support the perf subsystem with the expectation that all architectures would implement atomic64 support. Since then, other optional parts of the generic kernel have also come to expect atomic64 support. This patch enables generic atomic64 support for C6X architecture. Signed-off-by: NMark Salter <msalter@redhat.com>
-
由 Mark Salter 提交于
C6X currently lacks Lx_CACHE_SHIFT defines which are needed in a few places in the generic kernel. This patch adds _SHIFT defines for the various caches and bases the Lx_CACHE_BYTES defines on them. Signed-off-by: NMark Salter <msalter@redhat.com>
-
- 19 7月, 2012 4 次提交
-
-
由 Mark Salter 提交于
commit a610d6e6: pull clearing RESTORE_SIGMASK into block_sigmask() left behind a compiler warning: arch/c6x/kernel/signal.c:252:6: warning: unused variable 'ret' This patch cleans up the warning by removing the unused variable. Signed-off-by: NMark Salter <msalter@redhat.com>
-
由 Ken Cox 提交于
This patch adds support for the TMS320C6678 SoC on an EVMC6678LE evaluation board. The 6678 is a C66x family CPU which is very similar to the already supported C64x CPUs with the addition of floating point instructions. Signed-off-by: NKen Cox <jkc@redhat.com> Signed-off-by: NMark Salter <msalter@redhat.com> CC: Aurelien Jacquiot <a-jacquiot@ti.com> CC: linux-c6x-dev@linux-c6x.org
-
由 Mark Salter 提交于
The core priority PIC code uses legacy irq support to facilitate direct mapping of core hw interrupt numbers to linux interrupt numbers. This patch removes the legacy irq usage and replaces it with a generic linear mapping. Signed-off-by: NMark Salter <msalter@redhat.com>
-
由 Mark Salter 提交于
The megamodule PIC cascades a number of interrupt sources into the core priority PIC. The megamodule code depends on the core hardware interrupt numbers being mapped one-to-one with regard to linux interrupt numbers. This patch removes that dependence in order to pave the way for removing the direct mapping in the core PIC code. Signed-off-by: NMark Salter <msalter@redhat.com>
-
- 17 7月, 2012 1 次提交
-
-
由 Joe Perches 提交于
Convert the existing uses of random_ether_addr to the new eth_random_addr. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 6月, 2012 6 次提交
-
-
由 Al Viro 提交于
Does block_sigmask() + tracehook_signal_handler(); called when sigframe has been successfully built. All architectures converted to it; block_sigmask() itself is gone now (merged into this one). I'm still not too happy with the signature, but that's a separate story (IMO we need a structure that would contain signal number + siginfo + k_sigaction, so that get_signal_to_deliver() would fill one, signal_delivered(), handle_signal() and probably setup...frame() - take one). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Only 3 out of 63 do not. Renamed the current variant to __set_current_blocked(), added set_current_blocked() that will exclude unblockable signals, switched open-coded instances to it. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
replace boilerplate "should we use ->saved_sigmask or ->blocked?" with calls of obvious inlined helper... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
first fruits of ..._restore_sigmask() helpers: now we can take boilerplate "signal didn't have a handler, clear RESTORE_SIGMASK and restore the blocked mask from ->saved_mask" into a common helper. Open-coded instances switched... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 24 5月, 2012 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 22 5月, 2012 2 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Thomas Gleixner 提交于
Sigh, I missed to check which architecture Kconfig files actually include the core Kconfig file. There are a few which did not. So we broke them. Instead of adding the includes to those, we are better off to move the include to init/Kconfig like we did already with irqs and others. This does not change anything for the architectures using the old style periodic timer mode. It just solves the build wreckage there. For those architectures which use the clock events infrastructure it moves the include of the core Kconfig file to "General setup" which is a way more logical place than having it at random locations specified by the architecture specific Kconfigs. Reported-by: NIngo Molnar <mingo@kernel.org> Cc: Anna-Maria Gleixner <anna-maria@glx-um.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 21 5月, 2012 1 次提交
-
-
由 Anna-Maria Gleixner 提交于
Signed-off-by: NAnna-Maria Gleixner <anna-maria@glx-um.de> Acked-by: NMark Salter <msalter@redhat.com> Link: http://lkml.kernel.org/r/20120518163105.156595383@glx-um.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 18 5月, 2012 1 次提交
-
-
由 Mark Salter 提交于
Signed-off-by: NMark Salter <msalter@redhat.com>
-
- 17 5月, 2012 1 次提交
-
-
由 Suresh Siddha 提交于
Historical prepare_to_copy() is mostly a no-op, duplicated for majority of the architectures and the rest following the x86 model of flushing the extended register state like fpu there. Remove it and use the arch_dup_task_struct() instead. Suggested-by: NOleg Nesterov <oleg@redhat.com> Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1336692811-30576-1-git-send-email-suresh.b.siddha@intel.comAcked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Chris Zankel <chris@zankel.net> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 15 5月, 2012 1 次提交
-
-
由 Mark Salter 提交于
C6x userspace supports a shared library mechanism called DSBT for systems with no MMU. DSBT is similar to FDPIC in allowing shared text segments and private copies of data segments without an MMU. Both methods access data using a base register and offset. With FDPIC, the caller of an external function sets up the base register for the callee. With DSBT, the called function sets up its own base register. Other details differ but both userspaces need the same thing from the kernel loader: a map of where each ELF segment was loaded. The FDPIC loader already provides this, so DSBT just uses it. This patch enables BINFMT_ELF_FDPIC by default for C6X and provides the necessary architecture hooks for the generic loader. Signed-off-by: NMark Salter <msalter@redhat.com>
-
- 08 5月, 2012 1 次提交
-
-
由 Thomas Gleixner 提交于
There is no functional difference. __get_free_pages() ends up calling alloc_pages_node(). Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Mark Salter <msalter@redhat.com> Link: http://lkml.kernel.org/r/20120505150141.621728944@linutronix.de
-