- 27 7月, 2012 14 次提交
-
-
由 Sam Ravnborg 提交于
Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
The quicklist stuff is not used anymore - drop it. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
We already check the model in head_32.S so no need to repeat the check here Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
The base is always the same so no need to use a variable for this. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
This function was only used to set of_pdt_build_more to leon_node_init(). But the leon_node_init() was a nop as prom_amba_init was never assigned. Cc: Daniel Hellstrom <daniel@gaisler.com> Cc: Konrad Eisele <konrad@gaisler.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
sparc32 does not support fixmaps - so do not pretend so by having the fixmap.h file. Move relevant parts to vaddrs.h. I looked at simplifying this even more but failed to understand the reasoning behind the extra guard page involved and due to missing testing possibilities only the trivial conversion was done. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
Remove all unused stuff from fixmap.h It is only used for highmem - sparc32 has no fixmap support. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
No users left of this function - drop it. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
We save one page of RAM dropping swapper_pg_dir. It was only used for an assignment in init-mm.c and we redid this later in srmmu.c anyway. This is likely a left-over from the sun4c removal. To avoid a dummy variable we use a simple #define swapper_pg_dir NULL Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
This allowed to us to kill a lot of casts, with no loss of readability in any places Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
Fix the most annoying issues that distracts me: - whitespace - missing space after "if" and "while" - spaces around operators and similar simple things. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
They are only used during early init so lets get rid of them after init to save some RAM. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 7月, 2012 1 次提交
-
-
由 Kirill Tkhai 提交于
Nobody uses straddles_64bit_va_hole(). Remove it Signed-off-by: NKirill Tkhai <tkhai@yandex.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 6月, 2012 6 次提交
-
-
由 Geert Uytterhoeven 提交于
prom_meminit() and prom_ranges_init() are declared in <asm/oplib_32.h>. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
prom_init() returns void. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjorn Helgaas 提交于
pcibios_assign_resource() isn't used anywhere; remove it. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Because fsrc2, unlike fmovd, does not update the %fsr register. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Just two changes: one udl endian fix, one nouveau memory corruption on some GPUs." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/fbcon: using nv_two_heads is not a good idea drm/udl: Make sure to get correct endian keys from vendor descriptor
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID fixes from Jiri Kosina: "The most important one is a purification of Kconfig for CONFIG_HID; the inclusion of HID groups and autoloading didn't leave the Kconfig in a really consistent state. Henrik's patch fixes that. In addition to that, there are two small fixes for logitech and magicmouse drivers." * 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Fix the generic Kconfig options HID: magicmouse: Correct report range of major / minor axes HID: logitech: don't use stack based dj_report structures
-
- 26 6月, 2012 5 次提交
-
-
由 Ben Skeggs 提交于
nv_two_heads() was never meant to be used outside of pre-nv50 code. The code checks for >= NV_10 for 2 CRTCs, then downgrades a few specific chipsets to 1 CRTC based on (pci_device & 0x0ff0). The breakage example seen is on GTX 560Ti, with a pciid of 0x1200, which gets detected as an NV20 (0x020x) with 1 CRTC by nv_two_heads(), causing memory corruption because there's actually 2 CRTCs.. This switches fbcon to use the CRTC count directly from the mode_config structure, which will also fix the same issue on Kepler boards which have 4 CRTCs. Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab. Trivial conflict due to new USB HID ID's being added next to each other (Baanto vs Axentia). * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (44 commits) [media] smia: Fix compile failures [media] Fix VIDIOC_DQEVENT docbook entry [media] s5p-fimc: Fix control creation function [media] s5p-mfc: Fix checkpatch error in s5p_mfc_shm.h file [media] s5p-mfc: Fix setting controls [media] v4l/s5p-mfc: added image size align in VIDIOC_TRY_FMT [media] v4l/s5p-mfc: corrected encoder v4l control definitions [media] v4l: mem2mem_testdev: Fix race conditions in driver [media] s5p-mfc: Bug fix of timestamp/timecode copy mechanism [media] cxd2820r: Fix an incorrect modulation type bitmask [media] em28xx: Show a warning if the board does not support remote controls [media] em28xx: Add remote control support for Terratec's Cinergy HTC Stick HD [media] USB: Staging: media: lirc: initialize spinlocks before usage [media] Revert "[media] media: mx2_camera: Fix mbus format handling" [media] bw-qcam: driver and pixfmt documentation fixes [media] cx88: fix firmware load on big-endian systems [media] cx18: support big-endian systems [media] ivtv: fix support for big-endian systems [media] tuner-core: return the frequency range of the correct tuner [media] v4l2-dev.c: fix g_parm regression in determine_valid_ioctls() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
Pull regulator fixes from Mark Brown: "A few small, driver specific bug fixes, nothing exciting here but all needed if you happen to be using the affected hardware." * tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: palmas: fix regmap offsets for enable/disable regulator: tps6524x: Fix get_voltage_sel for fixed voltage regulator: tps65023: Fix mask for LDOs output voltage select control
-
git://git.linaro.org/people/mszyprowski/linux-dma-mapping由 Linus Torvalds 提交于
Git pull DMA-mapping fix from Marek Szyprowski: "Another minor fixup for ARM dma-mapping redesign and extensions merged in this merge window" * 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: fix buffer chunk allocation order
-
由 Paul Mundt 提交于
Commit 2603efa3 ("bug.h: Fix up powerpc build regression") corrected the powerpc build case and extended the __ASSEMBLY__ guards, but it also got caught in pre-processor hell accidentally matching the else case of CONFIG_BUG resulting in the BUG disabled case tripping up on -Werror=implicit-function-declaration. It's not possible to __ASSEMBLY__ guard the entire file as architecture code needs to get at the BUGFLAG_WARNING definition in the GENERIC_BUG case, but the rest of the CONFIG_BUG=y/n case needs to be guarded. Rather than littering endless __ASSEMBLY__ checks in each of the if/else cases we just move the BUGFLAG definitions up under their own GENERIC_BUG test and then shove everything else under one big __ASSEMBLY__ guard. Build tested on all of x86 CONFIG_BUG=y, CONFIG_BUG=n, powerpc (due to it's dependence on BUGFLAG definitions in assembly code), and sh (due to not bringing in linux/kernel.h to satisfy the taint flag definitions used by the generic bug code). Hopefully that's the end of the corner cases and I can abstain from ever having to touch this infernal header ever again. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Tested-by: NFengguang Wu <wfg@linux.intel.com> Acked-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 6月, 2012 10 次提交
-
-
由 Henrik Rydberg 提交于
The generic HID driver is obviously not a special driver, so move it outside of the special drivers menu. Explain the usage and make the default follow the HID setting. This should simplify migration from older kernels. While at it, remove the redundant HID_SUPPORT option and modify the HID and USB_HID entries to better explain the bus structure. Reported-by: NJan Beulich <jbeulich@suse.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Yufeng Shen 提交于
In patch "HID: magicmouse: Adjust major / minor axes to scale", touch_major and touch_minor axes are scaled by a factor of four when reported but the max touch_major/minor is not scaled accordingly. This patch scales the max touch_major/minor to be consistent with the reported value. Signed-off-by: NYufeng Shen <miletus@chromium.org> Acked-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Marek Szyprowski 提交于
IOMMU-aware dma_alloc_attrs() implementation allocates buffers in power-of-two chunks to improve performance and take advantage of large page mappings provided by some IOMMU hardware. However current code, due to a subtle bug, allocated those chunks in the smallest-to-largest order, what completely killed all the advantages of using larger than page chunks. If a 4KiB chunk has been mapped as a first chunk, the consecutive chunks are not aligned correctly to the power-of-two which match their size and IOMMU drivers were not able to use internal mappings of size other than the 4KiB (largest common denominator of alignment and chunk size). This patch fixes this issue by changing to the correct largest-to-smallest chunk size allocation sequence. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
-
由 Dave Airlie 提交于
This is a port of commit b49f184b Author: Ben Collins <bcollins@ubuntu.com> from udlfb to udl kms driver. The driver was not using le16_to_cpu when reading keys from the vendor descriptor, causing incorrect parsing. Mainly, sku_pixel_limit was not being parsed on big-endian systems. This would result in a blank screen on big-endian CPUs where the DL chips's max mode was smaller than the monitor's native mode. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Linus Torvalds 提交于
-
由 Anatol Pomozov 提交于
Coult -> Could Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Avi Kivity: "Fixing a scheduling-while-atomic bug in the ppc code, and a bug which allowed pci bridges to be assigned to guests." * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Drop locks around call to kvmppc_pin_guest_page KVM: Fix PCI header check on device assignment
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
Pull InfiniBand/RDMA fixes from Roland Dreier: - Fixes to new ocrdma driver - Typo in test in CMA * tag 'rdma-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cma: QP type check on received REQs should be AND not OR RDMA/ocrdma: Fix off by one in ocrdma_query_gid() RDMA/ocrdma: Fixed RQ error CQE polling RDMA/ocrdma: Correct queue SGE calculation RDMA/ocrdma: Correct reported max queue sizes RDMA/ocrdma: Fixed GID table for vlan and events
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "Nothing very controversial in here. Most of the fixes are for OMAP this time around, with some orion/kirkwood and a tegra patch mixed in." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: Orion: Fix Virtual/Physical mixup with watchdog ARM: Kirkwood: clk_register_gate_fn: add fn assignment ARM: Orion5x - Restore parts of io.h, with rework ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled ARM: OMAP2+: mux: fix sparse warning ARM: OMAP2+: CM: increase the module disable timeout ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks ARM: OMAP4: hwmod data: fix 32k sync timer idle modes ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby ARM: OMAP: Fix Beagleboard DVI reset gpio arm/dts: OMAP2: Fix interrupt controller binding ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0 ARM: OMAP2+: Fix MUSB ifdefs for platform init code ARM: tegra: make tegra_cpu_reset_handler_enable() __init ARM: OMAP: PM: Lock clocks list while generating summary ARM: iconnect: Remove include of removed linux/spi/orion_spi.h
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Nothing major in here, one radeon SI fix for tiling, and one uninit var fix, two minor header file fixes." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: drop comment about this header being autogenerated. drm/edid: don't return stack garbage from supports_rb vga_switcheroo: Add include guard drm/radeon: SI tiling fixes for display
-
- 24 6月, 2012 4 次提交
-
-
由 Roland Dreier 提交于
-
由 Andrew Lunn 提交于
The orion watchdog is expecting to be passed the physcial address of the hardware, and will ioremap() it to give a virtual address it will use as the base address for the hardware. However, when creating the platform resource record, a virtual address was being used. Add the necassary #define's so we can pass the physical address as expected. Tested on Kirkwood and Orion5x. Cc: stable <stable@vger.kernel.org> Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Marc Kleine-Budde 提交于
In commit: 98d9986c ARM: Kirkwood: Replace clock gating the kirkwood clock gating has been reworked. A custom variant of clock gating, that calls a custom function before gating the clock off, has been introduced. However in clk_register_gate_fn() this custom function "fn" is never assigned. This patch adds the missing fn assignment. Cc: stable <stable@vger.kernel.org> Signed-off-by: NMarc Kleine-Budde <mkl@blackshift.org> Tested-by: NAndrew Lunn <andrew@lunn.ch> Acked-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Andrew Lunn 提交于
Commit 4d5fc58d (ARM: remove bunch of now unused mach/io.h files) removed the orion5x io.h. Unfortunately, this is still needed for the definition of IO_SPACE_LIMIT which overrides the default 64K. All Orion based systems have 1Mbyte of IO space per PCI[e] bus, and try to request_resource() this size. Orion5x has two such PCI buses. It is likely that the original, removed version, was broken. This version might be less broken. However, it has not been tested on hardware with a PCI card, let alone hardware with a PCI card with IO capabilities. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Acked-by: NRob Herring <rob.herring@calxeda.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-