u32 and uid_t have the same size and semantics so this change
should have no operational effect.  This just removes the WTF
factor when looking at variables that hold both uids and gids
whos type is uid_t.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Now that the kuids and kgids conversion have propogated
through net/sunrpc/ and the fs/nfs/ it is safe to enable
building nfs when user namespaces are enabled.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

- Use uid_eq and gid_eq when comparing kuids and kgids.
- Use make_kuid(&init_user_ns, -2) and make_kgid(&init_user_ns, -2) as
  the initial uid and gid on nfs inodes, instead of using the typeunsafe
  value of -2.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

When reading uids and gids off the wire convert them to
kuids and kgids.

When putting kuids and kgids onto the wire first convert
them to uids and gids the other side will understand.

When printing kuids and kgids convert them to values in
the initial user namespace then use normal printf formats.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

When reading uids and gids off the wire convert them to
kuids and kgids.

When putting kuids and kgids onto the wire first convert
them to uids and gids the other side will understand.

Add an additional failure mode incoming for uids or gids
that are invalid.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

When reading uids and gids off the wire convert them to
kuids and kgids.

When putting kuids and kgids onto the wire first convert
them to uids and gids the other side will understand.

Add an additional failure mode for incoming uid or
gids that are invalid.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Convert nfs_map_name_to_uid to return a kuid_t value.
Convert nfs_map_name_to_gid to return a kgid_t value.
Convert nfs_map_uid_to_name to take a kuid_t paramater.
Convert nfs_map_gid_to_name to take a kgid_t paramater.

Tweak nfs_fattr_map_owner_to_name to use a kuid_t intermediate value.
Tweak nfs_fattr_map_group_to_name to use a kgid_t intermediate value.

Which makes these functions properly handle kuids and kgids, including
erroring of the generated kuid or kgid is invalid.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

When reading kuids from the wire map them into the initial user
namespace, and validate the mapping succeded.

When reading kgids from the wire map them into the initial user
namespace, and validate the mapping succeded.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

When a new rpc connection is established with an in-kernel server, the
traffic passes through svc_process_common, and svc_set_client and down
into svcauth_unix_set_client if it is of type RPC_AUTH_NULL or
RPC_AUTH_UNIX.

svcauth_unix_set_client then looks at the uid of the credential we
have assigned to the incomming client and if we don't have the groups
already cached makes an upcall to get a list of groups that the client
can use.

The upcall encodes send a rpc message to user space encoding the uid
of the user whose groups we want to know.  Encode the kuid of the user
in the initial user namespace as nfs mounts can only happen today in
the initial user namespace.

When a reply to an upcall comes in convert interpret the uid and gid values
from the rpc pipe as uids and gids in the initial user namespace and convert
them into kuids and kgids before processing them further.

When reading proc files listing the uid to gid list cache convert the
kuids and kgids from into uids and gids the initial user namespace.  As we are
displaying server internal details it makes sense to display these values
from the servers perspective.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

When writing kuids onto the wire first map them into the initial user
namespace.

When writing kgids onto the wire first map them into the initial user
namespace.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

In svcauth_unix introduce a helper unix_gid_hash as otherwise the
expresion to generate the hash value is just too long.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

For each received uid call make_kuid and validate the result.
For each received gid call make_kgid and validate the result.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

- Use from_kuid when generating the on the wire uid values.
- Use make_kuid when reading on the wire values.

In gss_encode_v0_msg, since the uid in gss_upcall_msg is now a kuid_t
generate the necessary uid_t value on the stack copy it into
gss_msg->databuf where it can safely live until the message is no
longer needed.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

In auth unix there are a couple of places INVALID_GID is used a
sentinel to mark the end of uc_gids array.  Use gid_valid
as a type safe way to verify we have not hit the end of
valid data in the array.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

When printing kuids and kgids for debugging purpropses convert them
to ordinary integers so their values can be fed to the oridnary
print functions.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

In unx_create_cred directly assign gids from acred->group_info
to cred->uc_gids.

In unx_match directly compare uc_gids with group_info.

Now that both group_info and unx_cred gids are stored as kgids
this is valid and the extra layer of translation can be removed.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

When comparing uids use uid_eq instead of ==.
When comparing gids use gid_eq instead of ==.

And unfortunate cost of type safety.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Convert variables that store uids and gids to be of type
kuid_t and kgid_t instead of type uid_t and gid_t.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Instead of (uid_t)0 use GLOBAL_ROOT_UID.
Instead of (gid_t)0 use GLOBAL_ROOT_GID.
Instead of (uid_t)-1 use INVALID_UID
Instead of (gid_t)-1 use INVALID_GID.
Instead of NOGROUP use INVALID_GID.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

- Use kuid_t and kgit in struct nfsacl_encode_desc.
- Convert from kuids and kgids when generating on the wire values.
- Convert on the wire values to kuids and kgids when read.
- Modify cmp_acl_entry to be type safe comparison on posix acls.
  Only acls with type ACL_USER and ACL_GROUP can appear more
  than once and as such need to compare more than their tag.
- The e_id field is being removed from posix acls so don't initialize it.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

ncpfs does not natively support uids and gids so this conversion was
simply a matter of updating the the type of the mounteduid, the uid
and the gid on the superblock. Fixing the ioctls that read them,
updating the mount option parser and the mount option printer.

Cc: Petr Vandrovec <petr@vandrovec.name>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

Now that all of the necessary work has been done to push kuids and
kgids throughout gfs2 and to convert between kuids and kgids when
reading and writing the on disk structures it is safe to enable gfs2
when multiple user namespaces are enabled.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

When reading dinodes from the disk convert uids and gids
into kuids and kgids to store in vfs data structures.

When writing to dinodes to the disk convert kuids and kgids
in the in memory structures into plain uids and gids.

For now all on disk data structures are assumed to be
stored in the initial user namespace.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Where kuid_t values are compared use uid_eq and where kgid_t values
are compared use gid_eq.  This is unfortunately necessary because
of the type safety that keeps someone from accidentally mixing
kuids and kgids with other types.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Remove the QUOTA_USER and QUOTA_GRUP defines.  Remove
the last vestigal users of QUOTA_USER and QUOTA_GROUP.

Now that struct kqid is used throughout the gfs2 quota
code the need there is to use QUOTA_USER and QUOTA_GROUP
and the defines are just extraneous and confusing.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

- Change qd_id in struct gfs2_qutoa_data to struct kqid.
- Remove the now unnecessary QDF_USER bit field in qd_flags.
- Propopoage this change through the code generally making
  things simpler along the way.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

- In quota_refresh_user_store convert the user supplied uid
  into a kqid and pass it to gfs2_quota_refresh.

- In quota_refresh_group_store convert the user supplied gid
  into a kqid and pass it to gfs2_quota_refresh.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Both qd_alloc and qd2offset perform the exact same computation
to get an index from a gfs2_quota_data.   Make life a little
simpler and factor out this index computation.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

When a quota is queried return the uid or the gid in the mapped into
the caller's user namespace.  In addition perform the munged version
of the mapping so that instead of -1 a value that does not map is
reported as the overflowuid or the overflowgid.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Split NO_QUOTA_CHANGE into NO_UID_QUTOA_CHANGE and NO_GID_QUTOA_CHANGE
so the constants may be well typed.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

In set_dqblk it is an error to look at fdq->d_id or fdq->d_flags.
Userspace quota applications do not set these fields when calling
quotactl(Q_XSETQLIM,...), and the kernel does not set those fields
when quota_setquota calls set_dqblk.

gfs2 never looks at fdq->d_id or fdq->d_flags after checking
to see if they match the id and type supplied to set_dqblk.

No other linux filesystem in set_dqblk looks at either fdq->d_id
or fdq->d_flags.

Therefore remove these bogus checks from gfs2 and allow normal
quota setting applications to work.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Now that ocfs2 has been converted to store uids and gids in
kuid_t and kgid_t and all of the conversions have been added
to the appropriate places it is safe to allow building and
using ocfs2 with user namespace support enabled.

Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>