Some revisions of the ASUS Q500A series have a keyboard related
issue which is reproducible only after Windows with installed ASUS
tools is started.

In this case the Linux side will have a blocked keyboard or
report incorrect or incomplete hotkey events.

To make Linux work properly again, a complete power down
(unplug power supply and remove battery) is needed.

Linux/atkbd after a clean start will get the following code on VOLUME_UP
key: {0xe0, 0x30, 0xe0, 0xb0}. After Windows, the same key will generate
this codes: {0xe1, 0x23, 0xe0, 0x30, 0xe0, 0xb0}. As result atkdb will
be confused by buggy codes.

This patch is filtering this buggy code out.

https://bugzilla.kernel.org/show_bug.cgi?id=119391Signed-off-by: NOleksij Rempel <linux@rempel-privat.de>
Cc: Alex Henrie <alexhenrie24@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: acpi4asus-user@lists.sourceforge.net
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

[dvhart: Add return after pr_warn to avoid false confirmation of filter]
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

acpi_video0 doesn't work, asus-wmi brightness interface doesn't work, too.
So, we use native brightness interface to handle the brightness adjustion,
and add quirk_asus_ux303ub.
Signed-off-by: Nzino lin <linzino7@gmail.com>
Acked-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

The Asus X456UA has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion.

quirk_no_rfkill prevents asus-wmi from registering RFKill switches at
all for this laptop and allows asus-wireless to drive the LED through
the ASHS ACPI device.  This laptop already has a quirk for setting
WAPF=4, so use quirk_no_rfkill_wapf4, which both disables rfkill and
sets WAPF=4.
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: NAngela Traeger <angie@endlessm.com>
Reviewed-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

The Asus X456UF has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion.

quirk_no_rfkill prevents asus-wmi from registering RFKill switches at
all for this laptop and allows asus-wireless to drive the LED through
the ASHS ACPI device.  This laptop already has a quirk for setting
WAPF=4, so this commit creates a new quirk, quirk_no_rfkill_wapf4, which
both disables rfkill and sets WAPF=4.
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: NCarlo Caione <carlo@endlessm.com>
Reviewed-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

The Asus Z550MA has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion. quirk_no_rfkill prevents asus-wmi
from registering RFKill switches at all for this laptop and allows
asus-wireless to drive the LED through the ASHS ACPI device.
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: NMing Shuo Chiu <chiu@endlessm.com>
Reviewed-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

The Asus U303LB has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion. quirk_no_rfkill prevents asus-wmi
from registering RFKill switches at all for this laptop and allows
asus-wireless to drive the LED through the ASHS ACPI device.
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: NMousou Yuu <guogaishiwo@gmail.com>
Reviewed-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

The Asus N552VW has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion. quirk_no_rfkill prevents asus-wmi
from registering RFKill switches at all for this laptop and allows
asus-wireless to drive the LED through the ASHS ACPI device.
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@endlessm.com>
Reviewed-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Some Asus laptops that have an airplane-mode indicator LED, also have
the WMI WLAN user bit set, and the following bits in their DSDT:

Scope (_SB)
{
  (...)
  Device (ATKD)
  {
    (...)
    Method (WMNB, 3, Serialized)
    {
      (...)
      If (LEqual (IIA0, 0x00010002))
      {
        OWGD (IIA1)
        Return (One)
      }
    }
  }
}

So when asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store the
wlan state, it drives the airplane-mode indicator LED (through the call
to OWGD) in an inverted fashion: the LED is ON when airplane mode is OFF
(since wlan is ON), and vice-versa.

This commit creates a quirk to not register a RFKill switch at all for
these laptops, to allow the asus-wireless driver to drive the airplane
mode LED correctly through the ASHS ACPI device. It also adds a match to
that quirk for the Asus X555UB, which is affected by this problem.
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@endlessm.com>
Reviewed-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Ausu laptops issue key 0x7A when the toggle ALS key is pressed (Fn+A on
Asus U38N). Update the key_entry so userspace can handle the event.

Tested on Asus U38N.
Signed-off-by: NNick Leiten <nickleiten@gmail.com>
Reviewed-By: NCorentin Chary <corentin.chary@gmail.com>
[dvhart: cleaned up commit message and comment line length]
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Wi-Fi on ASUS X75VD laptop does not work unless asus_nb_wmi module
is loaded with wapf=4 option. Add quirk for this.
Signed-off-by: NOleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

These laptops boot with wifi as hard-blocked, with no obvious way to
enable it. Using a quirk to set wapf=4 solves the problem.
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Acked-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Wifi on this laptop does not work unless asus-nb-wmi.wapf=4 is specified on
the kerne commandline, add a quirk for this.

Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1173681Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

X550VB as many others Asus laptops need wapf4 quirk to make RFKILL
switch be functional. Otherwise system boots with wireless card
disabled and is only possible to enable it by suspend/resume.

Bug report:
http://bugzilla.redhat.com/show_bug.cgi?id=1089731#c23Reported-and-tested-by: NVratislav Podzimek <vpodzime@redhat.com>
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681
the U32U needs wapf=4 too.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

The actual x401u does not use the so named x401u quirk but the x55u quirk.
All that the x401u quirk does it setting wapf to 4, so rename it to wapf4 to
stop the confusion.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681
the X550CC needs wapf=4 too.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Constify the asus_quirks[] DMI table. There's no need to have it
writeable during runtime.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

As reported here: https://bugs.launchpad.net/bugs/1277959
the X550CL needs wapf=4 too.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

BIOS won't light on the wifi-led after S3, so asus-wmi driver needs to
control the wifi and wifi-led status.
But, it'll lead to bt status error if asus-wmi driver controls bt as well.
So, for X200CA, asus-wmi driver controls wifi status only and have to set
wapf to 1.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

The 'asus-nb-wmi' WAPF parameter must be set to 4, so the internal Wireless LAN device is operational.
Signed-off-by: Npoma <pomidorabelisima@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

The 'asus-nb-wmi' WAPF parameter must be set to 4, so the internal Wireless LAN device is operational.
Signed-off-by: NAndreas Utterberg <andreas.utterberg@thundera.se>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Need to set wapf to 4 for ASUSTeK COMPUTER INC. 1015E/U, so that
user can toggle wifi function through function key correctly.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Ignore Ambient Light Sensor notification key code 0xC6 found in ASUS UX31a.
When the illuminance changes dmesg shows:
[10814.939979] asus_wmi: Unknown key c6 pressed
Signed-off-by: NViktar Vauchkevich <victorenator@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

BugLink: http://bugs.launchpad.net/bugs/1172151

Need to set wapf to 4 for ASUSTeK COMPUTER INC. X75A, so that
user can toggle wifi function through function key correctly.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Fill up all the video switch keys in the map.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

For machines with AMD graphic chips, it will send out WMI event and ACPI
interrupt at the same time while hitting the hotkey. BIOS will notify the
system the next display output mode throught WMI event code, so that
windows' application can show an OSD to tell the user which mode will be
taken effect. User can hit the display toggle key many times within 2
seconds to choose the mode they want. After 2 seconds, WMI dirver should
send a WMIMethod(SDSP) command to tell the BIOS which mode the user chose.
And then BIOS will raise another ACPI interrupt to tell the system to
really switch the display mode.

In Linux desktop, we don't have this kind of OSD to let users to choose
the mode they want, so we don't need to call WMIMethod(SDSP) to have
another ACPI interrupt. To simplify the problem, we just have to ignore
the WMI event, and let the first ACPI interrupt to send out the key event.

For the need, here comes another quirk to add machines with this kind of
behavior. When the WMI driver receives the display toggle WMI event, and
found the machin is in the list, it will do nothing and let ACPI video
driver to report the key event.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

0x60 is touchpad enable key, but is misdefined in the keymap.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Maybe this should be shared in another module...
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are some new video switch keys that used by newer machines.
0xA0 - SDSP HDMI only
0xA1 - SDSP LCD + HDMI
0xA2 - SDSP CRT + HDMI
0xA3 - SDSP TV + HDMI
But in Linux, there is no suitable userspace application to handle this,
so, mapping them all to KEY_SWITCHVIDEOMODE.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The BIOS of these machines will try to enable/disable wifi/bt in
their own sqeuence. It won't read the enable/disable parameter
in WMI command, but just iterates the wifi/bt's status described below
1st. enable wifi, enable bt
2nd. disable wifi, enable bt
3rd. enable wifi, disable bt
4th. disable wifi, disable bt
That will totally mess up the rfkill status, since we will try to read
wifi and bt's status and reset it again while booting up.

To avoid this, these machines should set the wapf value to 4,
that will let software totally control the wifi/bt's status and
BIOS will do nothing instead of sending out the 0x88(KEY_RFKILL) event
instead of 0x5e(wifi enable), 0x5f(wifi diable), 0x7d(bt enable), and
0x7e(bt disable) through WMI.

With this patch[1], it will handle the KEY_RFKILL event correctly and
will block/unblock wifi and bt together.

1. https://lkml.org/lkml/2012/5/21/75Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Even if it's currently unused.
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Some models work better with different values of wapf, so move the
variable into quriks_entry to make it more easy to give a specific
value to different models.

Based on original patch from AceLan Kao <acelan.kao@canonical.com>

Cc: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Some ASUS ET2012E/I All-in-One machines that use a scalar board
to control the brightness, and they only accept brightness up and down
command. So, I introduced a get_scalar_command() function to pass the
command to the scalar board through WMI.

Besides, we have to store the brightness value locally, for we need the
old value to know the brightness value is increasing or decreasing.

BTW, since there is no way to retrieve the actual brightness(it would be
a fixed value), and the max brightness value would be fixed to 1, so we
have to keep passing the brightness up/down command when we reached the
max brightness value or 0.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

ref: http://dev.iksaif.net/projects/3/wiki/Asus-laptop_WAPFSigned-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Introduce a new driver for Asus Notebooks shipped with
a WMI device instead of the old ACPI device. The WMI
device is almost the same as the one present in Eee PC,
but the event guid and the keymap are different.

The keymap comes from asus-laptop module.

On Asus notebooks, when you call the WMI device, you always
need a 64bit buffer, even if you only want to get the state
of a device (tested on a G73).
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>