- 14 10月, 2016 3 次提交
-
-
由 Tobias Klauser 提交于
The dev parameter passed to __axienet_device_reset() is not used inside the function, so remove it. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Reviewed-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
This is supposed to loop 1000 times and then give up. The problem is it's a post-op and after the loop we test if "loop" is zero when really it would be -1. Fix this by making it a pre-op. Fixes: 1b7c55c4 ("liquidio: CN23XX queue manipulation") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
The phy_start() is used to indicate the PHY is now ready to do its work. The state is changed, normally to PHY_UP which means that both the MAC and the PHY are ready. If the phy driver is using polling, when the next poll happens, the state machine notices the PHY is now in PHY_UP, and kicks off auto-negotiation, if needed. If however, the PHY is using interrupts, there is no polling. The phy is stuck in PHY_UP until the next interrupt comes along. And there is no reason for the PHY to interrupt. Have phy_start() schedule the state machine to run, which both speeds up the polling use case, and makes the interrupt use case actually work. This problems exists whenever there is a state change which will not cause an interrupt. Trigger the state machine in these cases, e.g. phy_error(). Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Cc: Kyle Roeschley <kyle.roeschley@ni.com> Tested-by: NKyle Roeschley <kyle.roeschley@ni.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 10月, 2016 13 次提交
-
-
由 David S. Miller 提交于
Based upon v2 of Stephen's patch. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
Wiht the latest rework of the xen-netback driver, we get a warning on ARM about the types passed into min(): drivers/net/xen-netback/rx.c: In function 'xenvif_rx_next_chunk': include/linux/kernel.h:739:16: error: comparison of distinct pointer types lacks a cast [-Werror] The reason is that XEN_PAGE_SIZE is not size_t here. There is no actual bug, and we can easily avoid the warning using the min_t() macro instead of min(). Fixes: eb1723a2 ("xen-netback: refactor guest rx") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NPaul Durrant <paul.durrant@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch fixes a problem when propagated the failure of ptp_clock_register to open function. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
The gmac 4.x version has not extended descriptors (that are available on 3.x instead of). While initializing the PTP module, the advanced PTP was enabled in case of extended descriptors. This cannot be applied for 4.x version where only the hardware capability register has to show if the feature is present. Patch also adds some extra netdev_(debug/inof) to better dump the configuration. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
The definition of qed_get_rdma_ops() is not a prototype unless we add 'void' here, as indicated by this W=1 warning: drivers/net/ethernet/qlogic/qed/qed_roce.c: In function ‘qed_get_rdma_ops’: drivers/net/ethernet/qlogic/qed/qed_roce.c:2950:28: error: old-style function definition [-Werror=old-style-definition] Fixes: abd49676 ("qed: Add RoCE ll2 & GSI support") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NYuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
The software calculation of UDP checksum in Netvsc driver was only handling IPv4 case. By using skb_checksum_help() instead all protocols can be handled. Rearrange code to eliminate goto and look like other drivers. This is a temporary solution; recent versions of Window Server etc do support UDP checksum offload, just need to do the appropriate negotiation with host to validate before using. This will be done in later patch. Please queue this for -stable as well. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Vrabel 提交于
If a VIF has been ready for rx_stall_timeout (60s by default) and an Rx ring is drained of all requests an Rx stall will be incorrectly detected. When this occurs and the guest Rx queue is empty, the Rx ring's event index will not be set and the frontend will not raise an event when new requests are placed on the ring, permanently stalling the VIF. This is a regression introduced by eb1723a2 (xen-netback: refactor guest rx). Fix this by reinstating the setting of queue->last_rx_time when placing a packet onto the guest Rx ring. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NPaul Durrant <paul.durrant@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Tsyrklevich 提交于
The reserved field precise_offset->rsv is not cleared before being copied to user space, leaking kernel stack memory. Clear the struct before it's copied. Signed-off-by: NVlad Tsyrklevich <vlad@tsyrklevich.net> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
I am hitting this in mlx5: drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c: In function reclaim_pages_cmd.clone.0: drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:346: error: call to __compiletime_assert_346 declared with attribute error: BUILD_BUG_ON failed: __mlx5_bit_off(manage_pages_out, pas[i]) % 64 drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c: In function give_pages: drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:291: error: call to __compiletime_assert_291 declared with attribute error: BUILD_BUG_ON failed: __mlx5_bit_off(manage_pages_in, pas[i]) % 64 Problem is that this is doing a BUILD_BUG_ON on a non-constant expression because of trying to take offset of pas[i] in the structure. Fix is to create MLX5_ARRAY_SET64 that takes an additional argument that is the field index to separate between BUILD_BUG_ON on the array constant field and the indexed field to assign the value to. There are two callers of MLX5_SET64 that are trying to get a variable offset, change those to call MLX5_ARRAY_SET64 passing 'pas' and 'i' as the arguments to use in the offset check and the indexed value assignment. Fixes: a533ed5e ("net/mlx5: Pages management commands via mlx5 ifc") Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjørn Mork 提交于
The Quectel EC21 and EC25 need the same "set DTR" request as devices based on the MDM9230 chipset, but has no USB3 support. Our best guess is that the "set DTR" functionality depends on chipset and/or baseband firmware generation. But USB3 is still an optional feature. Since we cannot enable this unconditionally for all older devices, and there doesn't appear to be anything we can use in the USB descriptors to identify these chips, we are forced to use a device specific quirk flag. Reported-and-tested-by: NSebastian Sjoholm <sebastian.sjoholm@gmail.com> Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Since we will remove items off the list using list_del() we need to use a safe version of the list_for_each_entry() macro aptly named list_for_each_entry_safe(). Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Acked-by: NYuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
While build testing with randconfig on x86, I ran into this warning that appears to have been around forever drivers/net/ethernet/ti/tlan.c: In function ‘tlan_probe1’: drivers/net/ethernet/ti/tlan.c:614:1: error: label ‘err_out’ defined but not used [-Werror=unused-label] This can be trivially avoided by just moving the label into the existing #ifdef. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Durrant 提交于
It is useful to be able to see the hash configuration when running tests. This patch adds a debugfs node for that purpose. The original version of this patch (commit c0c64c15) was reverted due to build failures caused by a conflict with commit 0364a882 ("xen-netback: switch to threaded irq for control ring"). This new version of the patch is nearly identical to the original, the only difference being that creation of the debugfs node is predicated on 'ctrl_irq' being non-zero rather then the now non-existent 'ctrl_task'. Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 10月, 2016 24 次提交
-
-
由 Dan Carpenter 提交于
Body of an "if" statement wasn't indented. Add a tab. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Arnd Bergmann 提交于
While looking at a patch that introduced a compile-time warning "‘pmc_core_dev_state_get’ defined but not used" (I sent a patch for debugfs to fix it), I noticed that the same patch caused it in intel_pmc_core also introduced a bogus run-time warning: "PMC Core: debugfs register failed". The problem is the IS_ERR_OR_NULL() check that as usual gets things wrong: when CONFIG_DEBUGFS_FS is disabled, debugfs_create_dir() fails with an error code, and we don't need to warn about it, unlike the case in which it returns NULL. This reverts the driver to the previous state of not warning about CONFIG_DEBUGFS_FS being disabled. I chose not to restore the driver to making a runtime error in debugfs fatal in pmc_core_probe(). Fixes: df2294fb ("intel_pmc_core: Convert to DEFINE_DEBUGFS_ATTRIBUTE") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Bjorn Helgaas 提交于
Reorder struct hisi_pcie to put generic fields first. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bjorn Helgaas 提交于
Only interfaces used from outside the driver, e.g., those called by the DesignWare core, need to accept pointers to the generic struct pcie_port. Internal interfaces can accept pointers to the device-specific struct, which makes them more straightforward. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bjorn Helgaas 提交于
Include the PCIE_HIP06_CTRL_OFF block base in the PCIE_SYS_STATE4 register address so reads of PCIE_SYS_STATE4 don't have to mention both. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bjorn Helgaas 提交于
Reorder struct dra7xx_pcie to put generic fields first. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bjorn Helgaas 提交于
The xilinx-nwl driver never uses the platform drvdata pointer, so don't bother setting it. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bjorn Helgaas 提交于
Use a local "struct device *dev" for brevity and consistency with other drivers. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bjorn Helgaas 提交于
xilinx_pcie_assign_msi() doesn't use the struct xilinx_pcie_port pointer passed to it, so remove the argument completely. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bjorn Helgaas 提交于
The xilinx driver never uses the platform drvdata pointer, so don't bother setting it. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bjorn Helgaas 提交于
Use a local "struct device *dev" for brevity and consistency with other drivers. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bjorn Helgaas 提交于
Add device-specific register accessors for consistency across host drivers. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bjorn Helgaas 提交于
Pass the struct xgene_pcie_port pointer, not addresses, to setup functions. This enables future simplifications. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bjorn Helgaas 提交于
The xgene driver never uses the platform drvdata pointer, so don't bother setting it. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bjorn Helgaas 提交于
The tegra driver never uses the platform drvdata pointer, so don't bother setting it. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bjorn Helgaas 提交于
Use a local "struct device *dev" for brevity and consistency with other drivers. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bjorn Helgaas 提交于
The tegra_pcie_phy_disable() path called pads_writel() with arguments in the wrong order. Swap them to be the "value, offset" order expected by pads_writel(). Fixes: 6fe7c187 ("PCI: tegra: Support per-lane PHYs") Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NThierry Reding <treding@nvidia.com> CC: stable@vger.kernel.org # v4.7+
-
由 Bjorn Helgaas 提交于
The rockchip driver never uses the platform drvdata pointer, so don't bother setting it. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NShawn Lin <shawn.lin@rock-chips.com>
-
由 Bjorn Helgaas 提交于
Use a local "struct device *dev" for brevity and consistency with other drivers. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Bjorn Helgaas 提交于
The DRV_NAME macro is only used once, so there's no real advantage to having the macro at all. Remove it and use the "rcar-pcie" name directly in the struct platform_driver. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Bjorn Helgaas 提交于
rcar_pcie_get_resources() doesn't use the platform_device pointer passed to it, so remove it. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Bjorn Helgaas 提交于
The rcar driver never uses the platform drvdata pointer, so don't bother setting it. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Bjorn Helgaas 提交于
Reorder struct qcom_pcie to put generic fields first. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bjorn Helgaas 提交于
Remove the struct qcom_pcie.dev member, which is a duplicate of the generic pp.dev member. No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-