Remove the registration of ring file's private_data, we do not use
it.
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

Based on feedback from Jens Axboe on 263782c1,
clean up get/put_reqs_available() to remove the no longer needed preempt_disable()
and preempt_enable() pair.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Cc: Jens Axboe <axboe@kernel.dk>

As of commit f8567a38 it is now possible to
have put_reqs_available() called from irq context.  While put_reqs_available()
is per cpu, it did not protect itself from interrupts on the same CPU.  This
lead to aio_complete() corrupting the available io requests count when run
under a heavy O_DIRECT workloads as reported by Robert Elliott.  Fix this by
disabling irq updates around the per cpu batch updates of reqs_available.

Many thanks to Robert and folks for testing and tracking this down.
Reported-by: NRobert Elliot <Elliott@hp.com>
Tested-by: NRobert Elliot <Elliott@hp.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Cc: Jens Axboe <axboe@kernel.dk>, Christoph Hellwig <hch@infradead.org>
Cc: stable@vger.kenel.org

ioctx_add_table() is the writer, it does not need rcu_read_lock() to
protect ->ioctx_table. It relies on mm->ioctx_lock and rcu locks just
add the confusion.

And it doesn't need rcu_dereference() by the same reason, it must see
any updates previously done under the same ->ioctx_lock. We could use
rcu_dereference_protected() but the patch uses rcu_dereference_raw(),
the function is simple enough.

The same for kill_ioctx(), although it does not update the pointer.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

On 04/30, Benjamin LaHaise wrote:
>
> > -		ctx->mmap_size = 0;
> > -
> > -		kill_ioctx(mm, ctx, NULL);
> > +		if (ctx) {
> > +			ctx->mmap_size = 0;
> > +			kill_ioctx(mm, ctx, NULL);
> > +		}
>
> Rather than indenting and moving the two lines changing mmap_size and the
> kill_ioctx() call, why not just do "if (!ctx) ... continue;"?  That reduces
> the number of lines changed and avoid excessive indentation.

OK. To me the code looks better/simpler with "if (ctx)", but this is subjective
of course, I won't argue.

The patch still removes the empty line between mmap_size = 0 and kill_ioctx(),
we reset mmap_size only for kill_ioctx(). But feel free to remove this change.

-------------------------------------------------------------------------------
Subject: [PATCH v3 1/2] aio: change exit_aio() to load mm->ioctx_table once and avoid rcu_read_lock()

1. We can read ->ioctx_table only once and we do not read rcu_read_lock()
   or even rcu_dereference().

   This mm has no users, nobody else can play with ->ioctx_table. Otherwise
   the code is buggy anyway, if we need rcu_read_lock() in a loop because
   ->ioctx_table can be updated then kfree(table) is obviously wrong.

2. Update the comment. "exit_mmap(mm) is coming" is the good reason to avoid
   munmap(), but another reason is that we simply can't do vm_munmap() unless
   current->mm == mm and this is not true in general, the caller is mmput().

3. We do not really need to nullify mm->ioctx_table before return, probably
   the current code does this to catch the potential problems. But in this
   case RCU_INIT_POINTER(NULL) looks better.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

A kernel memory disclosure was introduced in aio_read_events_ring() in v3.10
by commit a31ad380.  The changes made to
aio_read_events_ring() failed to correctly limit the index into
ctx->ring_pages[], allowing an attacked to cause the subsequent kmap() of
an arbitrary page with a copy_to_user() to copy the contents into userspace.
This vulnerability has been assigned CVE-2014-0206.  Thanks to Mateusz and
Petr for disclosing this issue.

This patch applies to v3.12+.  A separate backport is needed for 3.10/3.11.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: stable@vger.kernel.org

The aio cleanups and optimizations by kmo that were merged into the 3.10
tree added a regression for userspace event reaping.  Specifically, the
reference counts are not decremented if the event is reaped in userspace,
leading to the application being unable to submit further aio requests.
This patch applies to 3.12+.  A separate backport is required for 3.10/3.11.
This issue was uncovered as part of CVE-2014-0206.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Cc: stable@vger.kernel.org
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>

Beginning to introduce those.  Just the callers for now, and it's
clumsier than it'll eventually become; once we finish converting
aio_read and aio_write instances, the things will get nicer.

For now, these guys are in parallel to ->aio_read() and ->aio_write();
they take iocb and iov_iter, with everything in iov_iter already
validated.  File offset is passed in iocb->ki_pos, iov/nr_segs -
in iov_iter.

Main concerns in that series are stack footprint and ability to
split the damn thing cleanly.

[fix from Peter Ujfalusi <peter.ujfalusi@ti.com> folded]
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

iovec should be reclaimed whenever caller of rw_copy_check_uvector() returns,
but it doesn't hold when failure happens right after aio_setup_vectored_rw().

Fix that in a such way to avoid hairy goto.
Signed-off-by: NLeon Yu <chianglungyu@gmail.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Cc: stable@vger.kernel.org

There is no need to have most of the code in kill_ioctx() indented.  Flatten
it.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

As reported by Anatol Pomozov, io_destroy() fails to report an error when
it loses the race to destroy a given ioctx.  Since there is a difference in
behaviour between the thread that wins the race (which blocks on outstanding
io requests) versus lthe thread that loses (which returns immediately), wire
up a return code from kill_ioctx() to the io_destroy() syscall.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Cc: Anatol Pomozov <anatol.pomozov@gmail.com>

ctx is no longer used in kiocb_cancel since

57282d8f ("aio: Kill ki_users")

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

deletes aio context and all resources related to. It makes sense that
no IO operations connected to the context should be running after the context
is destroyed. As we removed io_context we have no chance to
get requests status or call io_getevents().

man page for io_destroy says that this function may block until
all context's requests are completed. Before kernel 3.11 io_destroy()
blocked indeed, but since aio refactoring in 3.11 it is not true anymore.

Here is a pseudo-code that shows a testcase for a race condition discovered
in 3.11:

  initialize io_context
  io_submit(read to buffer)
  io_destroy()

  // context is destroyed so we can free the resources
  free(buffers);

  // if the buffer is allocated by some other user he'll be surprised
  // to learn that the buffer still filled by an outstanding operation
  // from the destroyed io_context

The fix is straight-forward - add a completion struct and wait on it
in io_destroy, complete() should be called when number of in-fligh requests
reaches zero.

If two or more io_destroy() called for the same context simultaneously then
only the first one waits for IO completion, other calls behaviour is undefined.

Tested: ran http://pastebin.com/LrPsQ4RL testcase for several hours and
  do not see the race condition anymore.
Signed-off-by: NAnatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

As reported by Tang Chen, Gu Zheng and Yasuaki Isimatsu, the following issues
exist in the aio ring page migration support.

As a result, for example, we have the following problem:

            thread 1                      |              thread 2
                                          |
aio_migratepage()                         |
 |-> take ctx->completion_lock            |
 |-> migrate_page_copy(new, old)          |
 |   *NOW*, ctx->ring_pages[idx] == old   |
                                          |
                                          |    *NOW*, ctx->ring_pages[idx] == old
                                          |    aio_read_events_ring()
                                          |     |-> ring = kmap_atomic(ctx->ring_pages[0])
                                          |     |-> ring->head = head;          *HERE, write to the old ring page*
                                          |     |-> kunmap_atomic(ring);
                                          |
 |-> ctx->ring_pages[idx] = new           |
 |   *BUT NOW*, the content of            |
 |    ring_pages[idx] is old.             |
 |-> release ctx->completion_lock         |

As above, the new ring page will not be updated.

Fix this issue, as well as prevent races in aio_ring_setup() by holding
the ring_lock mutex during kioctx setup and page migration.  This avoids
the overhead of taking another spinlock in aio_read_events_ring() as Tang's
and Gu's original fix did, pushing the overhead into the migration code.

Note that to handle the nesting of ring_lock inside of mmap_sem, the
migratepage operation uses mutex_trylock().  Page migration is not a 100%
critical operation in this case, so the ocassional failure can be
tolerated.  This issue was reported by Sasha Levin.

Based on feedback from Linus, avoid the extra taking of ctx->completion_lock.
Instead, make page migration fully serialised by mapping->private_lock, and
have aio_free_ring() simply disconnect the kioctx from the mapping by calling
put_aio_ring_file() before touching ctx->ring_pages[].  This simplifies the
error handling logic in aio_migratepage(), and should improve robustness.

v4: always do mutex_unlock() in cases when kioctx setup fails.
Reported-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Cc: stable@vger.kernel.org

Since commit 36bc08cc ("fs/aio: Add support to aio ring pages
migration") the aio ring setup code has used a special per-ring backing
inode for the page allocations, rather than just using random anonymous
pages.

However, rather than remembering the pages as it allocated them, it
would allocate the pages, insert them into the file mapping (dirty, so
that they couldn't be free'd), and then forget about them.  And then to
look them up again, it would mmap the mapping, and then use
"get_user_pages()" to get back an array of the pages we just created.

Now, not only is that incredibly inefficient, it also leaked all the
pages if the mmap failed (which could happen due to excessive number of
mappings, for example).

So clean it all up, making it much more straightforward.  Also remove
some left-overs of the previous (broken) mm_populate() usage that was
removed in commit d6c355c7 ("aio: fix race in ring buffer page
lookup introduced by page migration support") but left the pointless and
now misleading MAP_POPULATE flag around.
Tested-and-acked-by: NBenjamin LaHaise <bcrl@kvack.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The arbitrary restriction on page counts offered by the core
migrate_page_move_mapping() code results in rather suspicious looking
fiddling with page reference counts in the aio_migratepage() operation.
To fix this, make migrate_page_move_mapping() take an extra_count parameter
that allows aio to tell the code about its own reference count on the page
being migrated.

While cleaning up aio_migratepage(), make it validate that the old page
being passed in is actually what aio_migratepage() expects to prevent
misbehaviour in the case of races.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

e34ecee2 reworked the percpu reference
counting to correct a bug trinity found.  Unfortunately, the change lead
to kioctxes being leaked because there was no final reference count to
put.  Add that reference count back in to fix things.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Cc: stable@vger.kernel.org

Clean up the aio ring file in the fail path of aio_setup_ring
and ioctx_alloc. And maybe it can fix the GPF issue reported by
Dave Jones:
https://lkml.org/lkml/2013/11/25/898Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

After freeing ring_pages we leave it as is causing a dangling pointer. This
has already caused an issue so to help catching any issues in the future
NULL it out.
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

ioctx_alloc() calls aio_setup_ring() to allocate a ring. If aio_setup_ring()
fails to do so it would call aio_free_ring() before returning, but
ioctx_alloc() would call aio_free_ring() again causing a double free of
the ring.

This is easily reproducible from userspace.
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

alloc_anon_inode() returns an ERR_PTR(), it doesn't return NULL.

Fixes: 71ad7490 ('rework aio migrate pages to use aio fs')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Don't abuse anon_inodes.c to host private files needed by aio;
we can bloody well declare a mini-fs of our own instead of
patching up what anon_inodes can create for us.
Tested-by: NBenjamin LaHaise <bcrl@kvack.org>
Acked-by: NBenjamin LaHaise <bcrl@kvack.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

aio kiocb refcounting was broken - it was relying on keeping track of
the number of available ring buffer entries, which it needs to do
anyways; then at shutdown time it'd wait for completions to be delivered
until the # of available ring buffer entries equalled what it was
initialized to.

Problem with  that is that the ring buffer is mapped writable into
userspace, so userspace could futz with the head and tail pointers to
cause the kernel to see extra completions, and cause free_ioctx() to
return while there were still outstanding kiocbs. Which would be bad.

Fix is just to directly refcount the kiocbs - which is more
straightforward, and with the new percpu refcounting code doesn't cost
us any cacheline bouncing which was the whole point of the original
scheme.

Also clean up ioctx_alloc()'s error path and fix a bug where it wasn't
subtracting from aio_nr if ioctx_add_table() failed.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Dmitry Vyukov managed to trigger a case where aio_migratepage can cause a
use-after-free during teardown of the aio ring buffer's mapping.  This turns
out to be caused by access to the ioctx's ring_pages via the migratepage
operation which was not being protected by any locks during ioctx freeing.
Use the address_space's private_lock to protect use and updates of the mapping's
private_data, and make ioctx teardown unlink the ioctx from the address space.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Tested-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

Patch "aio: fix rcu sparse warnings introduced by ioctx table lookup patch"
(77d30b14 in linux-next.git) introduced a
couple of new rcu_dereference calls which are not protected by rcu_read_lock
and result in following warnings during syscall fuzzing(trinity):

[  471.646379] ===============================
[  471.649727] [ INFO: suspicious RCU usage. ]
[  471.653919] 3.11.0-next-20130906+ #496 Not tainted
[  471.657792] -------------------------------
[  471.661235] fs/aio.c:503 suspicious rcu_dereference_check() usage!
[  471.665968]
[  471.665968] other info that might help us debug this:
[  471.665968]
[  471.672141]
[  471.672141] rcu_scheduler_active = 1, debug_locks = 1
[  471.677549] 1 lock held by trinity-child0/3774:
[  471.681675]  #0:  (&(&mm->ioctx_lock)->rlock){+.+...}, at: [<c119ba1a>] SyS_io_setup+0x63a/0xc70
[  471.688721]
[  471.688721] stack backtrace:
[  471.692488] CPU: 1 PID: 3774 Comm: trinity-child0 Not tainted 3.11.0-next-20130906+ #496
[  471.698437] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  471.703151]  00000000 00000000 c58bbf30 c18a814b de2234c0 c58bbf58 c10a4ec6 c1b0d824
[  471.709544]  c1b0f60e 00000001 00000001 c1af61b0 00000000 cb670ac0 c3aca000 c58bbfac
[  471.716251]  c119bc7c 00000002 00000001 00000000 c119b8dd 00000000 c10cf684 c58bbfb4
[  471.722902] Call Trace:
[  471.724859]  [<c18a814b>] dump_stack+0x4b/0x66
[  471.728772]  [<c10a4ec6>] lockdep_rcu_suspicious+0xc6/0x100
[  471.733716]  [<c119bc7c>] SyS_io_setup+0x89c/0xc70
[  471.737806]  [<c119b8dd>] ? SyS_io_setup+0x4fd/0xc70
[  471.741689]  [<c10cf684>] ? __audit_syscall_entry+0x94/0xe0
[  471.746080]  [<c18b1fcc>] syscall_call+0x7/0xb
[  471.749723]  [<c1080000>] ? task_fork_fair+0x240/0x260
Signed-off-by: NArtem Savkov <artem.savkov@gmail.com>
Reviewed-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

Prior to the introduction of page migration support in "fs/aio: Add support
to aio ring pages migration" / 36bc08cc,
mapping of the ring buffer pages was done via get_user_pages() while
retaining mmap_sem held for write.  This avoided possible races with userland
racing an munmap() or mremap().  The page migration patch, however, switched
to using mm_populate() to prime the page mapping.  mm_populate() cannot be
called with mmap_sem held.

Instead of dropping the mmap_sem, revert to the old behaviour and simply
drop the use of mm_populate() since get_user_pages() will cause the pages to
get mapped anyways.  Thanks to Al Viro for spotting this issue.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

Sseveral sparse warnings were caused by missing rcu_dereference() annotations
for dereferencing mm->ioctx_table.  Thankfully, none of those were actual bugs
as the deref was protected by a spin lock in all instances.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Reported-by: NFengguang Wu <fengguang.wu@intel.com>

The commit 36bc08cc ("fs/aio: Add support to aio ring pages migration")
added some debugging code that is not required and resulted in a build error
when 98474236 ("vfs: make the dentry cache use the lockref infrastructure")
was added to the tree.  The code is not required, so just delete it.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

Another shortcoming of the table lookup patch was revealed where the pointer
was not being tested before being dereferenced.  Verify this to avoid the
NULL pointer dereference.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

In the patch "aio: convert the ioctx list to table lookup v3", incorrect
handling in the ioctx_alloc() error path was introduced that lead to an
ioctx being added via ioctx_add_table() while freed when the ioctx_alloc()
call returned -EAGAIN due to hitting the aio_max_nr limit.  Fix this by
only calling ioctx_add_table() as the last step in ioctx_alloc().

Also, several unnecessary rcu_dereference() calls were added that lead to
RCU warnings where the system was already protected by a spin lock for
accessing mm->ioctx_table.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

In the event that an overflow/underflow occurs while calculating req_batch,
clamp the minimum at 1 request instead of doing a BUG_ON().
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

On Wed, Jun 12, 2013 at 11:14:40AM -0700, Kent Overstreet wrote:
> On Mon, Apr 15, 2013 at 02:40:55PM +0300, Octavian Purdila wrote:
> > When using a large number of threads performing AIO operations the
> > IOCTX list may get a significant number of entries which will cause
> > significant overhead. For example, when running this fio script:
> >
> > rw=randrw; size=256k ;directory=/mnt/fio; ioengine=libaio; iodepth=1
> > blocksize=1024; numjobs=512; thread; loops=100
> >
> > on an EXT2 filesystem mounted on top of a ramdisk we can observe up to
> > 30% CPU time spent by lookup_ioctx:
> >
> >  32.51%  [guest.kernel]  [g] lookup_ioctx
> >   9.19%  [guest.kernel]  [g] __lock_acquire.isra.28
> >   4.40%  [guest.kernel]  [g] lock_release
> >   4.19%  [guest.kernel]  [g] sched_clock_local
> >   3.86%  [guest.kernel]  [g] local_clock
> >   3.68%  [guest.kernel]  [g] native_sched_clock
> >   3.08%  [guest.kernel]  [g] sched_clock_cpu
> >   2.64%  [guest.kernel]  [g] lock_release_holdtime.part.11
> >   2.60%  [guest.kernel]  [g] memcpy
> >   2.33%  [guest.kernel]  [g] lock_acquired
> >   2.25%  [guest.kernel]  [g] lock_acquire
> >   1.84%  [guest.kernel]  [g] do_io_submit
> >
> > This patchs converts the ioctx list to a radix tree. For a performance
> > comparison the above FIO script was run on a 2 sockets 8 core
> > machine. This are the results (average and %rsd of 10 runs) for the
> > original list based implementation and for the radix tree based
> > implementation:
> >
> > cores         1         2         4         8         16        32
> > list       109376 ms  69119 ms  35682 ms  22671 ms  19724 ms  16408 ms
> > %rsd         0.69%      1.15%     1.17%     1.21%     1.71%     1.43%
> > radix       73651 ms  41748 ms  23028 ms  16766 ms  15232 ms   13787 ms
> > %rsd         1.19%      0.98%     0.69%     1.13%    0.72%      0.75%
> > % of radix
> > relative    66.12%     65.59%    66.63%    72.31%   77.26%     83.66%
> > to list
> >
> > To consider the impact of the patch on the typical case of having
> > only one ctx per process the following FIO script was run:
> >
> > rw=randrw; size=100m ;directory=/mnt/fio; ioengine=libaio; iodepth=1
> > blocksize=1024; numjobs=1; thread; loops=100
> >
> > on the same system and the results are the following:
> >
> > list        58892 ms
> > %rsd         0.91%
> > radix       59404 ms
> > %rsd         0.81%
> > % of radix
> > relative    100.87%
> > to list
>
> So, I was just doing some benchmarking/profiling to get ready to send
> out the aio patches I've got for 3.11 - and it looks like your patch is
> causing a ~1.5% throughput regression in my testing :/
... <snip>

I've got an alternate approach for fixing this wart in lookup_ioctx()...
Instead of using an rbtree, just use the reserved id in the ring buffer
header to index an array pointing the ioctx.  It's not finished yet, and
it needs to be tidied up, but is most of the way there.

		-ben
--
"Thought is the essence of where you are now."
--
kmo> And, a rework of Ben's code, but this was entirely his idea
kmo>		-Kent

bcrl> And fix the code to use the right mm_struct in kill_ioctx(), actually
free memory.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

With the changes to use percpu counters for aio event ring size calculation,
existing increases to aio_max_nr are now insufficient to allow for the
allocation of enough events.  Double the value used for aio_max_nr to account
for the doubling introduced by the percpu slack.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

sock_aio_dtor() is dead code - and stuff that does need to do cleanup
can simply do it before calling aio_complete().
Signed-off-by: NKent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

The kiocb refcount is only needed for cancellation - to ensure a kiocb
isn't freed while a ki_cancel callback is running. But if we restrict
ki_cancel callbacks to not block (which they currently don't), we can
simply drop the refcount.
Signed-off-by: NKent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

The old aio retry infrastucture needed to save the various arguments to
to aio operations. But with the retry infrastructure gone, we can trim
struct kiocb quite a bit.
Signed-off-by: NKent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

This code doesn't serve any purpose anymore, since the aio retry
infrastructure has been removed.

This change should be safe because aio_read/write are also used for
synchronous IO, and called from do_sync_read()/do_sync_write() - and
there's no looping done in the sync case (the read and write syscalls).
Signed-off-by: NKent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

aio_complete() (arguably) needs to keep its own trusted copy of the tail
pointer, but io_getevents() doesn't have to use it - it's already using
the head pointer from the ring buffer.

So convert it to use the tail from the ring buffer so it touches fewer
cachelines and doesn't contend with the cacheline aio_complete() needs.
Signed-off-by: NKent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

Originally, io_event() was documented to return the io_event if
cancellation succeeded - the io_event wouldn't be delivered via the ring
buffer like it normally would.

But this isn't what the implementation was actually doing; the only
driver implementing cancellation, the usb gadget code, never returned an
io_event in its cancel function. And aio_complete() was recently changed
to no longer suppress event delivery if the kiocb had been cancelled.

This gets rid of the unused io_event argument to kiocb_cancel() and
kiocb->ki_cancel(), and changes io_cancel() to return -EINPROGRESS if
kiocb->ki_cancel() returned success.

Also tweak the refcounting in kiocb_cancel() to make more sense.
Signed-off-by: NKent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

This just converts the ioctx refcount to the new generic dynamic percpu
refcount code.
Signed-off-by: NKent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>