This trivial patch adds a short description for SERIAL_CLPS711X Kconfig
entry, removes excess dependence on the ARM-platform (this is done
globally for the platform), allows the driver to be compiled by default
and removes unnecessary description about GRUB and LILO, because these
bootloaders do not supported this platform.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that DM_RAID supports raid10, it needs to select that code
to ensure it is included.

Cc: Jonathan Brassow <jbrassow@redhat.com>
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

queuing writes to the md thread means that all requests go through the
one processor which may not be able to keep up with very high request
rates.

So use the plugging infrastructure to submit all requests on unplug.
If a 'schedule' is needed, we fall back on the old approach of handing
the requests to the thread for it to handle.
Signed-off-by: NNeilBrown <neilb@suse.de>

Let raid5d handle stripe in batch way to reduce conf->device_lock locking.
Signed-off-by: NShaohua Li <shli@fusionio.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

make_request() does stripe release for every stripe and the stripe usually has
count 1, which makes previous release_stripe() optimization not work. In my
test, this release_stripe() becomes the heaviest pleace to take
conf->device_lock after previous patches applied.

Below patch makes stripe release batch. All the stripes will be released in
unplug. The STRIPE_ON_UNPLUG_LIST bit is to protect concurrent access stripe
lru.
Signed-off-by: NShaohua Li <shli@fusionio.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

* set_fs(KERNEL_DS) + getname() is probably the weirdest implementation
of strdup() I've seen.  Especially since they don't to copy it at all...
* filp_open() never returns NULL; it's ERR_PTR(-E...) on failure.
* file->f_dentry is never going to be NULL, TYVM.
* match_strdup() + snprintf() + kfree() is a bloody weird way to spell
match_strlcpy().

Pox on cargo-cult programmers...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Support the MD RAID10 personality through dm-raid.c
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

Trivial support for irq domains, using either a linear map or radix tree
depending on the vector layout.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Commit ca5481c6 ("sh: pfc: Rudimentary
pinctrl-backed GPIO support.") introduced a regression for platforms that
were doing early GPIO API calls (from arch_initcall() or earlier),
leading to a situation where our two-stage registration logic would trip
itself up and we'd -ENODEV out of the pinctrl registration path,
resulting in endless -EPROBE_DEFER errors. Further lack of checking any
sort of errors from gpio_request() resulted in boot time warnings,
tripping on the FLAG_REQUESTED test-and-set in gpio_ensure_requested().

As it turns out there's no particular need to bother with the two-stage
registration, as the platform bus is already available at the point that
we have to start caring. As such, it's easiest to simply fold these
together in to a single init path, the ordering of which is ensured
through the platform's mux registration, as usual.
Reported-by: NRafael J. Wysocki <rjw@sisk.pl>
Reported-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

A recent commit:

commit d6fa5a4e
Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
    serial: sh-sci: prepare for conversion to the shdma base library

is not sufficient to update the sh-sci driver to the new shdma driver
layout. This caused compilation breakage, when CONFIG_SERIAL_SH_SCI_DMA
is enabled. This patch trivially fixes the problem by updating the DMA
descriptor manipulation code.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The recent shdma driver split has mistakenly removed support for partial
DMA transfer size calculation on forced termination. This patch restores
it.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NVinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Populate olpc_ec_priv with variables that were previously global.  This
makes things a tad bit clearer, IMO.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Acked-by: NPaul Fox <pgf@laptop.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

There's nothing about the debugfs interface for the EC driver that is
architecture-specific, so move it into the arch-independent driver.

The code is mostly unchanged with the exception of renamed variables, coding
style changes, and API updates.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Acked-by: NPaul Fox <pgf@laptop.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

This uses the new EC driver framework in drivers/platform/olpc.  The
XO-1 and XO-1.5-specific code is still in arch/x86, but the generic stuff
(including a new workqueue; no more running EC commands with IRQs disabled!)
can be shared with other architectures.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Acked-by: NPaul Fox <pgf@laptop.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

A problem we've noticed on XO-1.75 is when we suspend in the middle of
an EC command.  Don't allow that.

In the process, create a private object for the generic EC driver to use;
we have a framework for passing around a struct, use that rather than a
proliferation of global variables.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Acked-by: NPaul Fox <pgf@laptop.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

The 1.75-based OLPC EC driver already does this; let's do it for all EC
drivers.  This gives us nice suspend/resume hooks, amongst other things.

We want to run the EC's suspend hooks later than other drivers (which may
be setting wakeup masks or be running EC commands).  We also want to run
the EC's resume hooks earlier than other drivers (which may want to run EC
commands).
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Acked-by: NPaul Fox <pgf@laptop.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

This provides a new API allows different OLPC architectures to override the
EC driver.  x86 and ARM OLPC machines use completely different EC backends.

The olpc_ec_cmd is synchronous, and waits for the workqueue to send the
command to the EC.  Multiple callers can run olpc_ec_cmd() at once, and
they will by serialized and sleep while only one executes on the EC at a time.

We don't provide an unregister function, as that doesn't make sense within
the context of OLPC machines - there's only ever 1 EC, it's critical to
functionality, and it certainly not hotpluggable.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Acked-by: NPaul Fox <pgf@laptop.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Switch over to using olpc-ec.h in multiple steps, so as not to break builds.
This covers every driver that calls olpc_ec_cmd().
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Acked-by: NPaul Fox <pgf@laptop.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

The OLPC EC driver has outgrown arch/x86/platform/.  It's time to both
share common code amongst different architectures, as well as move it out
of arch/x86/.  The XO-1.75 is ARM-based, and the EC driver shares a lot of
code with the x86 code.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Acked-by: NPaul Fox <pgf@laptop.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

devm_kzalloc() doesn't need a matching devm_kfree(), the freeing mechanism
will trigger when driver unloads.
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ashish Jangam <ashish.jangam@kpitcummins.com>
Cc: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

At the probe we are assigning ret to return value of PTR_ERR right after
the rtc_register_drive()r, as we would have done it in the if
(IS_ERR(ptr)) check, since the function fails and goes inside that case
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ashish Jangam <ashish.jangam@kpitcummins.com>
Cc: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Set SOCK_MEMALLOC on the NBD socket to allow access to PFMEMALLOC reserves
so pages backed by NBD, particularly if swap related, can be cleaned to
prevent the machine being deadlocked.  It is still possible that the
PFMEMALLOC reserves get depleted resulting in deadlock but this can be
resolved by the administrator by increasing min_free_kbytes.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The skb->pfmemalloc flag gets set to true iff during the slab allocation
of data in __alloc_skb that the the PFMEMALLOC reserves were used.  If
page splitting is used, it is possible that pages will be allocated from
the PFMEMALLOC reserve without propagating this information to the skb.
This patch propagates page->pfmemalloc from pages allocated for fragments
to the skb.

It works by reintroducing and expanding the skb_alloc_page() API to take
an skb.  If the page was allocated from pfmemalloc reserves, it is
automatically copied.  If the driver allocates the page before the skb, it
should call skb_propagate_pfmemalloc() after the skb is allocated to
ensure the flag is copied properly.

Failure to do so is not critical.  The resulting driver may perform slower
if it is used for swap-over-NBD or swap-over-NFS but it should not result
in failure.

[davem@davemloft.net: API rename and consistency]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c has some memory isolation functions but they are used only
when we enable CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}.  So let's make
it configurable by new CONFIG_MEMORY_ISOLATION so that it can reduce
binary size and we can check it simple by CONFIG_MEMORY_ISOLATION, not if
defined CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix zillions of these:

drivers/media/video/v4l2-ioctl.c:1848: error: unknown field 'func' specified in initializer
drivers/media/video/v4l2-ioctl.c:1848: warning: missing braces around initializer
drivers/media/video/v4l2-ioctl.c:1848: warning: (near initialization for 'v4l2_ioctls[0].<anonymous>')
drivers/media/video/v4l2-ioctl.c:1848: warning: initialization makes integer from pointer without a cast
drivers/media/video/v4l2-ioctl.c:1848: error: initializer element is not computable at load time
drivers/media/video/v4l2-ioctl.c:1848: error: (near initialization for 'v4l2_ioctls[0].<anonymous>.offset')

Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/built-in.o: In function `radio_tea5777_set_freq':
radio-tea5777.c:(.text+0x4d8704): undefined reference to `__udivdi3'
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add PCI device support for VFIO.  PCI devices expose regions
for accessing config space, I/O port space, and MMIO areas
of the device.  PCI config access is virtualized in the kernel,
allowing us to ensure the integrity of the system, by preventing
various accesses while reducing duplicate support across various
userspace drivers.  I/O port supports read/write access while
MMIO also supports mmap of sufficiently sized regions.  Support
for INTx, MSI, and MSI-X interrupts are provided using eventfds to
userspace.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

This VFIO IOMMU backend is designed primarily for AMD-Vi and Intel
VT-d hardware, but is potentially usable by anything supporting
similar mapping functionality.  We arbitrarily call this a Type1
backend for lack of a better name.  This backend has no IOVA
or host memory mapping restrictions for the user and is optimized
for relatively static mappings.  Mapped areas are pinned into system
memory.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

VFIO is a secure user level driver for use with both virtual machines
and user level drivers.  VFIO makes use of IOMMU groups to ensure the
isolation of devices in use, allowing unprivileged user access.  It's
intended that VFIO will replace KVM device assignment and UIO drivers
(in cases where the target platform includes a sufficiently capable
IOMMU).

New in this version of VFIO is support for IOMMU groups managed
through the IOMMU core as well as a rework of the API, removing the
group merge interface.  We now go back to a model more similar to
original VFIO with UIOMMU support where the file descriptor obtained
from /dev/vfio/vfio allows access to the IOMMU, but only after a
group is added, avoiding the previous privilege issues with this type
of model.  IOMMU support is also now fully modular as IOMMUs have
vastly different interface requirements on different platforms.  VFIO
users are able to query and initialize the IOMMU model of their
choice.

Please see the follow-on Documentation commit for further description
and usage example.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

thermal_zone_device_register() does not modify 'type' argument, so it is
safe to declare it as const. Otherwise, if we pass a const string, we are
getting the ugly warning:

CC drivers/power/power_supply_core.o
drivers/power/power_supply_core.c: In function 'psy_register_thermal':
drivers/power/power_supply_core.c:204:6: warning: passing argument 1 of 'thermal_zone_device_register' discards 'const' qualifier from pointer target type [enabled by default]
include/linux/thermal.h:140:29: note: expected 'char *' but argument is of type 'const char *'
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: NJean Delvare <khali@linux-fr.org>

If dma_request_channel() fails (e.g. because DMA enine is not built
into the kernel), the return value from probe is zero causing the
driver to be bound to the device even though probe failed.

To fix, ensure that probe returns an error value when a DMA channel
request fail.
Signed-off-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove the private DMA API implementation from nand/omap2.c
making it use entirely the DMA engine API.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add DMA engine support to the OMAP2 NAND driver.  This supplements the
private DMA API implementation contained within this driver, and the
driver can be independently switched at build time between using DMA
engine and the private DMA API.
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove the private DMA API implementation from spi-omap2-mcspi.c,
making it use entirely the DMA engine API.
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add DMA engine support to the OMAP SPI driver.  This supplements the
private DMA API implementation contained within this driver, and the
driver can be independently switched at build time between using DMA
engine and the private DMA API for the transmit and receive sides.
Tested-by: NShubhrajyoti <shubhrajyoti@ti.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove the private DMA API implementation from omap, making it use
entirely the DMA engine API.
Tested-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add DMA engine support to the OMAP driver.  This supplements the
private DMA API implementation contained within this driver, and the
driver can be switched at build time between using DMA engine and the
private DMA API.
Tested-by: NTony Lindgren <tony@atomide.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove the private DMA API implementation from omap_hsmmc, making it
use entirely the DMA engine API.
Tested-by: NTony Lindgren <tony@atomide.com>
Tested-by: NVenkatraman S <svenkatr@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add DMA engine support to the OMAP HSMMC driver.  This supplements the
private DMA API implementation contained within this driver, and the
driver can be switched at build time between using DMA engine and the
private DMA API.
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Tested-by: NTony Lindgren <tony@atomide.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add support for cyclic DMA to the OMAP DMA engine driver.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>