- 03 5月, 2016 1 次提交
-
-
由 Julien Grall 提交于
Introduce a structure which are filled up by the arch timer driver and used by the virtual timer in KVM. The first member of this structure will be the timecounter. More members will be added later. A stub for the new helper isn't introduced because KVM requires the arch timer for both ARM64 and ARM32. The function arch_timer_get_timecounter is kept for the time being and will be dropped in a subsequent patch. Signed-off-by: NJulien Grall <julien.grall@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
- 29 4月, 2016 1 次提交
-
-
由 Marc Zyngier 提交于
The ARM architecture mandates that when changing a page table entry from a valid entry to another valid entry, an invalid entry is first written, TLB invalidated, and only then the new entry being written. The current code doesn't respect this, directly writing the new entry and only then invalidating TLBs. Let's fix it up. Cc: <stable@vger.kernel.org> Reported-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
- 21 4月, 2016 17 次提交
-
-
由 Suzuki K Poulose 提交于
Now that we can handle stage-2 page tables independent of the host page table levels, wire up the 16K page support. Cc: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
-
由 Suzuki K Poulose 提交于
Now that we don't have any fake page table levels for arm64, cleanup the common code to get rid of the dead code. Cc: Marc Zyngier <marc.zyngier@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
-
由 Suzuki K Poulose 提交于
On arm64, the hardware supports concatenation of upto 16 tables, at entry level for stage2 translations and we make use that whenever possible. This could lead to reduced number of translation levels than the normal (stage1 table) table. Also, since the IPA(40bit) is smaller than the some of the supported VA_BITS (e.g, 48bit), there could be different number of levels in stage-1 vs stage-2 tables. To reuse the kernel host page table walker for stage2 we have been using a fake software page table level, not known to the hardware. But with 16K translations, there could be upto 2 fake software levels (with 48bit VA and 40bit IPA), which complicates the code. Hence, we want to get rid of the hack. Now that we have explicit accessors for hyp vs stage2 page tables, define the stage2 walker helpers accordingly based on the actual table used by the hardware. Once we know the number of translation levels used by the hardware, it is merely a job of defining the helpers based on whether a particular level is folded or not, looking at the number of levels. Some facts before we calculate the translation levels: 1) Smallest page size supported by arm64 is 4K. 2) The minimum number of bits resolved at any page table level is (PAGE_SHIFT - 3) at intermediate levels. Both of them implies, minimum number of bits required for a level change is 9. Since we can concatenate upto 16 tables at stage2 entry, the total number of page table levels used by the hardware for resolving N bits is same as that for (N - 4) bits (with concatenation), as there cannot be a level in between (N, N-4) as per the above rules. Hence, we have STAGE2_PGTABLE_LEVELS = PGTABLE_LEVELS(KVM_PHYS_SHIFT - 4) With the current IPA limit (40bit), for all supported translations and VA_BITS, we have the following condition (even for 36bit VA with 16K page size): CONFIG_PGTABLE_LEVELS >= STAGE2_PGTABLE_LEVELS. So, for e.g, if PUD is present in stage2, it is present in the hyp(host). Hence, we fall back to the host definition if we find that a level is not folded. Otherwise we redefine it accordingly. A build time check is added to make sure the above condition holds. If this condition breaks in future, we can rearrange the host level helpers and fix our code easily. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
-
由 Suzuki K Poulose 提交于
Now that we have switched to explicit page table routines, get rid of the obsolete kvm_* wrappers. Also, kvm_tlb_flush_vmid_by_ipa is now called only on stage2 page tables, hence get rid of the redundant check. Cc: Marc Zyngier <marc.zyngier@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
-
由 Suzuki K Poulose 提交于
Now that the hyp page table is handled by different set of routines, rename the original shared routines to stage2 handlers. Also make explicit use of the stage2 page table helpers. unmap_range has been merged to existing unmap_stage2_range. Cc: Marc Zyngier <marc.zyngier@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
-
由 Suzuki K Poulose 提交于
We have common routines to modify hyp and stage2 page tables based on the 'kvm' parameter. For a smoother transition to using separate routines for each, duplicate the routines and modify the copy to work on hyp. Marks the forked routines with _hyp_ and gets rid of the kvm parameter which is no longer needed and is NULL for hyp. Also, gets rid of calls to kvm_tlb_flush_by_vmid_ipa() calls from the hyp versions. Uses explicit host page table accessors instead of the kvm_* page table helpers. Suggested-by: NChristoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
-
由 Suzuki K Poulose 提交于
We have stage2 page table helpers for both arm and arm64. Switch to the stage2 helpers for routines that only deal with stage2 page table. Cc: Marc Zyngier <marc.zyngier@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
-
由 Suzuki K Poulose 提交于
Introduce hyp_pxx_table_empty helpers for checking whether a given table entry is empty. This will be used explicitly once we switch to explicit routines for hyp page table walk. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
-
由 Suzuki K Poulose 提交于
Introduce stage2 page table helpers for arm64. With the fake page table level still in place, the stage2 table has the same number of levels as that of the host (and hyp), so they all fallback to the host version. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
-
由 Suzuki K Poulose 提交于
Introduce hyp_pxx_table_empty helpers for checking whether a given table entry is empty. This will be used explicitly once we switch to explicit routines for hyp page table walk. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Suzuki K Poulose 提交于
Define the page table helpers for walking the stage2 pagetable for arm. Since both hyp and stage2 have the same number of levels, as that of the host we reuse the host helpers. The exceptions are the p.d_addr_end routines which have to deal with IPA > 32bit, hence we use the open coded version of their host helpers which supports 64bit. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Suzuki K Poulose 提交于
Get rid of kvm_pud_huge() which falls back to pud_huge. Use pud_huge instead. Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
-
由 Suzuki K Poulose 提交于
Both arm and arm64 now provides a helper, pmd_thp_or_huge() to check if the given pmd represents a huge page. Use that instead of our own custom check. Suggested-by: NMark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
-
由 Suzuki K Poulose 提交于
Add a helper to determine if a given pmd represents a huge page either by hugetlb or thp, as we have for arm. This will be used by KVM MMU code. Suggested-by: NMark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Acked-by: NWill Deacon <will.deacon@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
-
由 Suzuki K Poulose 提交于
Rearrange the code for fake pgd handling, which is applicable only for arm64. This will later be removed once we introduce the stage2 page table walker macros. Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
-
由 Suzuki K Poulose 提交于
We share most of the bits for VTCR_EL2 for different page sizes, except for the TG0 value and the entry level value. This patch makes the definitions a bit more cleaner to reflect this fact. Also cleans up the VTTBR_X calculation. No functional changes. Cc: Marc Zyngier <marc.zyngier@arm.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
-
由 Suzuki K Poulose 提交于
TCR_EL1, TCR_EL2 and VTCR_EL2, all share some field positions (TG0, ORGN0, IRGN0 and SH0) and their corresponding value definitions. This patch makes the TCR_EL1 definitions reusable and uses them for TCR_EL2 and VTCR_EL2 fields. This also fixes a bug where we assume TG0 in {V}TCR_EL2 is 1bit field. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Acked-by: NWill Deacon <will.deacon@arm.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
-
- 06 4月, 2016 3 次提交
-
-
由 Sudeep Holla 提交于
Commit 1e947bad ("arm64: KVM: Skip HYP setup when already running in HYP") re-organized the hyp init code and ended up leaving the CPU hotplug and PM notifier even if hyp mode initialization fails. Since KVM is not yet supported with ACPI, the above mentioned commit breaks CPU hotplug in ACPI boot. This patch fixes teardown_hyp_mode to properly unregister both CPU hotplug and PM notifiers in the teardown path. Fixes: 1e947bad ("arm64: KVM: Skip HYP setup when already running in HYP") Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: NSudeep Holla <sudeep.holla@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Marc Zyngier 提交于
We always thought that 40bits of PA range would be the minimum people would actually build. Anything less is terrifyingly small. Turns out that we were both right and wrong. Nobody has ever built such a system, but the ARM Foundation Model has a PARange set to 36bits. Just because we can. Oh well. Now, the KVM API explicitely says that we offer a 40bit PA space to the VM, so we shouldn't run KVM on the Foundation Model at all. That being said, this patch offers a less agressive alternative, and loudly warns about the configuration being unsupported. You'll still be able to run VMs (at your own risks, though). This is just a workaround until we have a proper userspace API where we report the PARange to userspace. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Marc Zyngier 提交于
On a host that runs NTP, corrections can have a direct impact on the background timer that we program on the behalf of a vcpu. In particular, NTP performing a forward correction will result in a timer expiring sooner than expected from a guest point of view. Not a big deal, we kick the vcpu anyway. But on wake-up, the vcpu thread is going to perform a check to find out whether or not it should block. And at that point, the timer check is going to say "timer has not expired yet, go back to sleep". This results in the timer event being lost forever. There are multiple ways to handle this. One would be record that the timer has expired and let kvm_cpu_has_pending_timer return true in that case, but that would be fairly invasive. Another is to check for the "short sleep" condition in the hrtimer callback, and restart the timer for the remaining time when the condition is detected. This patch implements the latter, with a bit of refactoring in order to avoid too much code duplication. Cc: <stable@vger.kernel.org> Reported-by: NAlexander Graf <agraf@suse.de> Reviewed-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
- 01 4月, 2016 1 次提交
-
-
由 Will Deacon 提交于
The kernel is written in C, not python, so we need braces around multi-line if statements. GCC 6 actually warns about this, thanks to the fantastic new "-Wmisleading-indentation" flag: | virt/kvm/arm/pmu.c: In function ‘kvm_pmu_overflow_status’: | virt/kvm/arm/pmu.c:198:3: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] | reg &= vcpu_sys_reg(vcpu, PMCNTENSET_EL0); | ^~~ | arch/arm64/kvm/../../../virt/kvm/arm/pmu.c:196:2: note: ...this ‘if’ clause, but it is not | if ((vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E)) | ^~ As it turns out, this particular case is harmless (we just do some &= operations with 0), but worth fixing nonetheless. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
- 31 3月, 2016 2 次提交
-
-
由 James Morse 提交于
When the kernel is running at EL2, it doesn't need init_hyp_mode() to configure page tables for HYP. This function also registers the CPU hotplug and lower power notifiers that cause HYP to be re-initialised after the CPU has been reset. To avoid losing the register state that controls stage2 translation, move the registering of these notifiers into init_subsystems(), and add a is_kernel_in_hyp_mode() path to each callback. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Fixes: 1e947bad ("arm64: KVM: Skip HYP setup when already running in HYP") Signed-off-by: NJames Morse <james.morse@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Suzuki K Poulose 提交于
When we detect support for 16bit VMID in ID_AA64MMFR1, we set the VTCR_EL2_VS field to 1 to make use of 16bit vmids. But, with commit 3a3604bc ("arm64: KVM: Switch to C-based stage2 init") this is broken and we corrupt VTCR_EL2:T0SZ instead of updating the VS field. VTCR_EL2_VS was actually defined to the field shift (19) and not the real value for VS. This patch fixes the issue. Fixes: commit 3a3604bc ("arm64: KVM: Switch to C-based stage2 init") Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
- 27 3月, 2016 6 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
Pull Ceph updates from Sage Weil: "There is quite a bit here, including some overdue refactoring and cleanup on the mon_client and osd_client code from Ilya, scattered writeback support for CephFS and a pile of bug fixes from Zheng, and a few random cleanups and fixes from others" [ I already decided not to pull this because of it having been rebased recently, but ended up changing my mind after all. Next time I'll really hold people to it. Oh well. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (34 commits) libceph: use KMEM_CACHE macro ceph: use kmem_cache_zalloc rbd: use KMEM_CACHE macro ceph: use lookup request to revalidate dentry ceph: kill ceph_get_dentry_parent_inode() ceph: fix security xattr deadlock ceph: don't request vxattrs from MDS ceph: fix mounting same fs multiple times ceph: remove unnecessary NULL check ceph: avoid updating directory inode's i_size accidentally ceph: fix race during filling readdir cache libceph: use sizeof_footer() more ceph: kill ceph_empty_snapc ceph: fix a wrong comparison ceph: replace CURRENT_TIME by current_fs_time() ceph: scattered page writeback libceph: add helper that duplicates last extent operation libceph: enable large, variable-sized OSD requests libceph: osdc->req_mempool should be backed by a slab pool libceph: make r_request msg_size calculation clearer ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux由 Linus Torvalds 提交于
Pull orangefs filesystem from Mike Marshall. This finally merges the long-pending orangefs filesystem, which has been much cleaned up with input from Al Viro over the last six months. From the documentation file: "OrangeFS is an LGPL userspace scale-out parallel storage system. It is ideal for large storage problems faced by HPC, BigData, Streaming Video, Genomics, Bioinformatics. Orangefs, originally called PVFS, was first developed in 1993 by Walt Ligon and Eric Blumer as a parallel file system for Parallel Virtual Machine (PVM) as part of a NASA grant to study the I/O patterns of parallel programs. Orangefs features include: - Distributes file data among multiple file servers - Supports simultaneous access by multiple clients - Stores file data and metadata on servers using local file system and access methods - Userspace implementation is easy to install and maintain - Direct MPI support - Stateless" see Documentation/filesystems/orangefs.txt for more in-depth details. * tag 'ofs-pull-tag-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: (174 commits) orangefs: fix orangefs_superblock locking orangefs: fix do_readv_writev() handling of error halfway through orangefs: have ->kill_sb() evict the VFS side of things first orangefs: sanitize ->llseek() orangefs-bufmap.h: trim unused junk orangefs: saner calling conventions for getting a slot orangefs_copy_{to,from}_bufmap(): don't pass bufmap pointer orangefs: get rid of readdir_handle_s ornagefs: ensure that truncate has an up to date inode size orangefs: move code which sets i_link to orangefs_inode_getattr orangefs: remove needless wrapper around GFP_KERNEL orangefs: remove wrapper around mutex_lock(&inode->i_mutex) orangefs: refactor inode type or link_target change detection orangefs: use new getattr for revalidate and remove old getattr orangefs: use new getattr in inode getattr and permission orangefs: use new orangefs_inode_getattr to get size in write and llseek orangefs: use new orangefs_inode_getattr to create new inodes orangefs: rename orangefs_inode_getattr to orangefs_inode_old_getattr orangefs: remove inode->i_lock wrapper orangefs: put register_chrdev immediately before register_filesystem ...
-
git://github.com/jonmason/ntb由 Linus Torvalds 提交于
Pull NTB bug fixes from Jon Mason: "NTB bug fixes for tasklet from spinning forever, link errors, translation window setup, NULL ptr dereference, and ntb-perf errors. Also, a modification to the driver API that makes _addr functions optional" * tag 'ntb-4.6' of git://github.com/jonmason/ntb: NTB: Remove _addr functions from ntb_hw_amd NTB: Make _addr functions optional in the API NTB: Fix incorrect clean up routine in ntb_perf NTB: Fix incorrect return check in ntb_perf ntb: fix possible NULL dereference ntb: add missing setup of translation window ntb: stop link work when we do not have memory ntb: stop tasklet from spinning forever during shutdown. ntb: perf test: fix address space confusion
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull more SCSI updates from James Bottomley: "The only new stuff which missed the first pull request is an update to the UFS driver. The rest is an assortment of bug fixes and minor tweaks which appeared recently (some are fixes for recent code and some are stuff spotted recently by the checkers or the new gcc-6 compiler [most of Arnd's stuff])" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits) scsi_common: do not clobber fixed sense information scsi: ufs: select CONFIG_NLS scsi: fc: use get/put_unaligned64 for wwn access fnic: move printk()s outside of the critical code section. qla2xxx: avoid maybe_uninitialized warning megaraid_sas: add missing curly braces in ioctl handler lpfc: fix misleading indentation scsi_transport_sas: add 'scsi_target_id' sysfs attribute scsi_dh_alua: uninitialized variable in alua_check_vpd() scsi: ufs-qcom: add printouts of testbus debug registers scsi: ufs-qcom: enable/disable the device ref clock scsi: ufs-qcom: set PA_Local_TX_LCC_Enable before link startup scsi: ufs: add device quirk delay before putting UFS rails in LPM scsi: ufs: fix leakage during link off state scsi: ufs: tune UniPro parameters to optimize hibern8 exit time scsi: ufs: handle non spec compliant bkops behaviour by device scsi: ufs: add retry for query descriptors scsi: ufs: add error recovery after DL NAC error scsi: ufs: make error handling bit faster scsi: ufs: disable vccq if it's not needed by UFS device ...
-
由 Linus Torvalds 提交于
Commit 0b81d077 ("fs crypto: move per-file encryption from f2fs tree to fs/crypto") moved the f2fs crypto files to fs/crypto/ and renamed the symbol prefixes from "f2fs_" to "fscrypt_" (and from "F2FS_" to just "FS" for preprocessor symbols). Because of the symbol renaming, it's a bit hard to see it as a file move: use git show -M30 0b81d077 to lower the rename detection to just 30% similarity and make git show the files as renamed (the header file won't be shown as a rename even then - since all it contains is symbol definitions, it looks almost completely different). Even with the renames showing as renames, the diffs are not all that easy to read, since so much is just the renames. But Eric Biggers noticed that it's not just all renames: the initialization of the xts_tweak had been broken too, using the inode number rather than the page offset. That's not right - it makes the xfs_tweak the same for all pages of each inode. It _might_ make sense to make the xfs_tweak contain both the offset _and_ the inode number, but not just the inode number. Reported-by: NEric Biggers <ebiggers3@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 3月, 2016 9 次提交
-
-
由 Allen Hubbe 提交于
Kernel zero day testing warned about address space confusion. A virtual iomem address was used where a physical address is expected. The offending functions implement an optional part of the api, so they are removed. They can be added later, after testing. Fixes: a1b36958Signed-off-by: NAllen Hubbe <Allen.Hubbe@emc.com> Acked-by: NXiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Al Viro 提交于
* switch orangefs_remount() to taking ORANGEFS_SB(sb) instead of sb * remove from the list _before_ orangefs_unmount() - request_mutex in the latter will make sure that nothing observed in the loop in ORANGEFS_DEV_REMOUNT_ALL handling will get freed until the end of loop * on removal, keep the forward pointer and zero the back one. That way we can drop and regain the spinlock in the loop body (again, ORANGEFS_DEV_REMOUNT_ALL one) and still be able to get to the rest of the list. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMike Marshall <hubcap@omnibond.com>
-
由 Al Viro 提交于
Error should only be returned if nothing had been read/written. Otherwise we need to report a short read/write instead. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMike Marshall <hubcap@omnibond.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMike Marshall <hubcap@omnibond.com>
-
由 Al Viro 提交于
a) open files can't have NULL inodes b) it's SEEK_END, not ORANGEFS_SEEK_END; no need to get cute. c) make_bad_inode() on lseek()? Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMike Marshall <hubcap@omnibond.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMike Marshall <hubcap@omnibond.com>
-
由 Al Viro 提交于
just have it return the slot number or -E... - the caller checks the sign anyway Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMike Marshall <hubcap@omnibond.com>
-
由 Al Viro 提交于
it's always __orangefs_bufmap Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMike Marshall <hubcap@omnibond.com>
-
由 Al Viro 提交于
no point, really - we couldn't keep those across the calls of getdents(); it would be too easy to DoS, having all slots exhausted. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMike Marshall <hubcap@omnibond.com>
-