Improve the wording for the clock-indices binding documentation.
Also replace "empty nodes" by "empty strings", as reported before by Sergei
Shtylyov.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

General:
  - Add parameter names to .round_rate() and .set_rate().

Documentation/clk.txt:
  - Add missing parameter for .set_rate(),
  - Add missing .debug_init().

include/linux/clk-provider.h:
  - Add parent rate documentation for .round_rate(),
  - Reorder documentation to match implementation order,
  - Add missing documentation for .init().
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

- Remove spaces in front of TABs,
- Correct indentation for some CLK_* flag descriptions.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

With the addition of clock-indices, we need to change the renesas
clock implementation to use these instead of the local definition
of "renesas,clock-indices".

Since this will break booting with older device trees, we add a
simple auto-detection of which properties are present.
Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

HdG: add header exporting clk_sunxi_mmc_phase_control
Signed-off-by: NEmilio López <emilio@elopez.com.ar>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

This commit implements .determine_rate, so that our factor clocks can be
reparented when needed.
Signed-off-by: NEmilio López <emilio@elopez.com.ar>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

* Remove CE2_SLEEP_CLK, doesn't exist on 8960 family SoCs
* Fix incorrect offset for PMIC_SSBI2_RESET
* Fix typo:
	SIC_TIC -> SPS_TIC_H
	SFAB_ADM0_M2_A_CLK -> SFAB_ADM0_M2_H_CLK
* Fix naming convention:
	SFAB_CFPB_S_HCLK -> SFAB_CFPB_S_H_CLK
	SATA_SRC_CLK -> SATA_CLK_SRC
Signed-off-by: NKumar Gala <galak@codeaurora.org>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

The APQ8064 and MSM8960 share a significant amount of clock data and
code between the two SoCs.  Rather than duplicating the data we just add
support for a unqiue APQ8064 clock table into the MSM8960 code.

For now add just enough clocks to get a basic serial port going on an
APQ8064 device.
Signed-off-by: NKumar Gala <galak@codeaurora.org>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: trivial conflict due to missing ipq8064 support]

Most of the probe code is the same between all the different
clock controllers. Consolidate the code into a common.c file.
This makes changes to the common probe parts easier and reduces
chances for bugs.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

This simplifies error paths in drivers that use optional clocks
by allowing the NULL or error pointer to be passed
unconditionally.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

The same if-else statement exists four times to recalculate the
rate of a clock. Consolidate this logic into a single function to
save some lines.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

We dereference clk->ops during clock registration so this check
for NULL ops can't possibly ever be true.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Replace the "fake" fixed-rate clocks used previously for the
bcm21664 family with "real" ones.
Signed-off-by: NAlex Elder <elder@linaro.org>
Acked-by: NMatt Porter <mporter@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Define the set of CCUs and provided clocks sufficient to satisfy the
needs of all the existing clock references for BCM21664.  Replace
the "fake" fixed-rate clocks used previously with "real" ones.

Note that only the minimal set of these clocks and CCUs is defined
here.  More clock definitions will need to be added as required by
the addition of additional drivers.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Document the device tree binding for Broadcom BCM28164 clock control
units and clocks.  This SoC uses Kona CCUs, similar to the BCM281XX
SoC family.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

The next patch defines a binding for a new Broadcom SoC that uses
Kona style CCUs for its clocks.  Update the generic Kona clock
binding document so it's more natural to accomodate the definitions
of additional SoC families.

Specifically:
    - Define the compatible string values generically, referring
      to specific per-model values later in the document.
    - Put the device tree example immediately after the required
      properties listing, before the tables of SoC-specific values.
    - Clearly identify the start of the section defining specific
      values related to the BCM281XX family
    - Add a list of the specific BCM281XX family compatible strings.
    - Reword the description of the table slightly.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

The Broadcom 281xx clock code uses a #define for the compatible
string for it's clock control units (CCUs).  Rather than defining
those in the C source file, define them in the header file that's
shared by both the code and the device tree source file (along with
all the clock ids).
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Add support for clock gate hysteresis control.  For now, if it's
defined for a clock, it's enabled.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Add support for CCU policy engine control, and also for setting the
mask bits for bus clocks that require a policy change to get
activated.  This includes adding validity checking framework for
CCUs, to validate the policy fields if defined.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Rather than "manually" setting up each CCU's clock entries at run
time, define a flexible array of generic Kona clock structures
within the CCU structure itself.  Each of these entries contains
generic kona clock information (like its CCU pointer and clock
framework initialization data).  Each also has a pointer to a
structure contianing clock type-dependent initialization data
(like register definitions).

Since we'll iterate over these arrays we need to be sure they have
slots for all potential clock index values.  (E.g. for the root CCU
we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.)  To
ensure this we always define an extra entry and fill it using the
special initializer LAST_KONA_CLK.

Just about everything we need to know about a clock can be defined
statically.  As a result, kona_clk_setup() can be changed to take
just a kona_clk structure as its argument, and peri_clk_setup() can
be simplified.  With the information pre-defined we are also able
to handle most clock setup genericially.  We can do away with the
CCU-specific callback functions that previously were needed to set
up the entries in CCU's clock array.

Move the definition of the ccu_data structure down in "clk-kona.h"
to avoid a forward dependency.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

We know up front how many CCU's we'll support, so there's no need to
allocate their data structures dynamically.  Define a macro
KONA_CCU_COMMON() to simplify the initialization of many of the
fields in a ccu_data structure.  Pass the address of a statically
defined CCU structure to kona_dt_ccu_setup() rather than having that
function allocate one.

We also know at build time how many clocks a given CCU will provide,
though the number of of them for each CCU is different.  Record the
number of clocks we need in the CCU's clk_onecell_data struct
(which is used when we register the CCU with the common clock code
as a clock provider).  Rename that struct field "clk_data" (because
"data" alone gets a little confusing).

Use the known clock count to move the allocation of each CCU's
clocks array into ccu_clks_setup() rather than having each CCU's
setup callback function do it.

(The real motivation behind all of this is that we'll be doing some
static initialization of some additional CCU-specific data soon.)
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

As I developed the bcm281xx clock code I understood there were
restrictions on device tree "compatible" strings names, and as a
result "bcm11351" was used in places despite the part family being
more properly called "bcm281xx".  This can be a little confusing.

In some cases I went to far and things using "bcm11351" when that
was not necessary.

This patch remedies this.  It renames the symbol used to define the
"compatible" string (but not its value) so it uses "BCM281XX".
Similarly, the name names provided to the CLK_OF_DECLARE() macro
are changed, hoping to minimize the number of places that the
confusing "11351" string is used.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Use the init_data.name field to hold the name of a Kona clock rather
than duplicating it.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Don't let a failure of ccu_wait_bit() go unnoticed.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Currently, the for-loop used to try all the different dividers to find the
one that best fit tries all the values from 1 to max_div, incrementing by one.
In case of power-of-two, or table based divider, the loop isn't optimal.

Instead of incrementing by one, this patch provides directly the next divider.
Signed-off-by: NMaxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

In some cases, we want to be able to round the divider to the closest one,
instead than rounding up.

This patch adds a new CLK_DIVIDER_ROUND_CLOSEST flag to specify the divider
has to round to closest div, keeping rounding up as de default behaviour.
Signed-off-by: NMaxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

When a clock is unregsitered, we iterate over the list of
children and reparent them to NULL (i.e. orphan list). While
iterating the list, we should use the safe iterators because the
children list for this clock is changing when we reparent the
children to NULL. Failure to iterate safely can lead to slab
corruption like this:

=============================================================================
BUG kmalloc-128 (Not tainted): Poison overwritten
-----------------------------------------------------------------------------

Disabling lock debugging due to kernel taint
INFO: 0xed0c4900-0xed0c4903. First byte 0x0 instead of 0x6b
INFO: Allocated in clk_register+0x20/0x1bc age=297 cpu=2 pid=70
 __slab_alloc.isra.39.constprop.42+0x410/0x454
 kmem_cache_alloc_trace+0x200/0x24c
 clk_register+0x20/0x1bc
 devm_clk_register+0x34/0x68
 0xbf0000f0
 platform_drv_probe+0x18/0x48
 driver_probe_device+0x94/0x360
 __driver_attach+0x94/0x98
 bus_for_each_dev+0x54/0x88
 bus_add_driver+0xe8/0x204
 driver_register+0x78/0xf4
 do_one_initcall+0xc4/0x17c
 load_module+0x19ac/0x2294
 SyS_init_module+0xa4/0x110
 ret_fast_syscall+0x0/0x48
INFO: Freed in clk_unregister+0xd4/0x140 age=23 cpu=2 pid=73
 __slab_free+0x38/0x41c
 clk_unregister+0xd4/0x140
 release_nodes+0x164/0x1d8
 __device_release_driver+0x60/0xb0
 driver_detach+0xb4/0xb8
 bus_remove_driver+0x5c/0xc4
 SyS_delete_module+0x148/0x1d8
 ret_fast_syscall+0x0/0x48
INFO: Slab 0xeec50b90 objects=25 used=0 fp=0xed0c5400 flags=0x4080
INFO: Object 0xed0c48c0 @offset=2240 fp=0xed0c4a00

Bytes b4 ed0c48b0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
Object ed0c48c0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
Object ed0c48d0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
Object ed0c48e0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
Object ed0c48f0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
Object ed0c4900: 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  ....kkkkkkkkkkkk
Object ed0c4910: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
Object ed0c4920: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
Object ed0c4930: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5  kkkkkkkkkkkkkkk.
Redzone ed0c4940: bb bb bb bb                                      ....
Padding ed0c49e8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
Padding ed0c49f8: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ
CPU: 3 PID: 75 Comm: mdev Tainted: G    B         3.14.0-11033-g2054ba5ca781 #35
[<c0014be0>] (unwind_backtrace) from [<c0012240>] (show_stack+0x10/0x14)
[<c0012240>] (show_stack) from [<c04b74a0>] (dump_stack+0x70/0xbc)
[<c04b74a0>] (dump_stack) from [<c00f7a78>] (check_bytes_and_report+0xbc/0x100)
[<c00f7a78>] (check_bytes_and_report) from [<c00f7c48>] (check_object+0x18c/0x218)
[<c00f7c48>] (check_object) from [<c00f7efc>] (__free_slab+0x104/0x144)
[<c00f7efc>] (__free_slab) from [<c04b6668>] (__slab_free+0x3dc/0x41c)
[<c04b6668>] (__slab_free) from [<c014c008>] (load_elf_binary+0x88/0x12b4)
[<c014c008>] (load_elf_binary) from [<c0105a44>] (search_binary_handler+0x78/0x18c)
[<c0105a44>] (search_binary_handler) from [<c0106fc0>] (do_execve+0x490/0x5dc)
[<c0106fc0>] (do_execve) from [<c0036b8c>] (____call_usermodehelper+0x134/0x168)
[<c0036b8c>] (____call_usermodehelper) from [<c000f048>] (ret_from_fork+0x14/0x2c)
FIX kmalloc-128: Restoring 0xed0c4900-0xed0c4903=0x6b

Fixes: fcb0ee6a (clk: Implement clk_unregister)
Cc: Jiada Wang <jiada_wang@mentor.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>
Cc: stable@vger.kernel.org

Now that clk_unregister() frees the struct clk we're
unregistering we'll free memory twice: first we'll call kfree()
in __clk_release() with an address kmalloc doesn't know about and
second we'll call kfree() in the devres layer. Remove the
allocation of struct clk in devm_clk_register() and let
clk_release() handle it. This fixes slab errors like:

=============================================================================
BUG kmalloc-128 (Not tainted): Invalid object pointer 0xed08e8d0
-----------------------------------------------------------------------------

Disabling lock debugging due to kernel taint
INFO: Slab 0xeec503f8 objects=25 used=15 fp=0xed08ea00 flags=0x4081
CPU: 2 PID: 73 Comm: rmmod Tainted: G    B         3.14.0-11032-g526e9c764381 #34
[<c0014be0>] (unwind_backtrace) from [<c0012240>] (show_stack+0x10/0x14)
[<c0012240>] (show_stack) from [<c04b74dc>] (dump_stack+0x70/0xbc)
[<c04b74dc>] (dump_stack) from [<c00f6778>] (slab_err+0x74/0x84)
[<c00f6778>] (slab_err) from [<c04b6278>] (free_debug_processing+0x2cc/0x31c)
[<c04b6278>] (free_debug_processing) from [<c04b6300>] (__slab_free+0x38/0x41c)
[<c04b6300>] (__slab_free) from [<c03931bc>] (clk_unregister+0xd4/0x140)
[<c03931bc>] (clk_unregister) from [<c02fb774>] (release_nodes+0x164/0x1d8)
[<c02fb774>] (release_nodes) from [<c02f8698>] (__device_release_driver+0x60/0xb0)
[<c02f8698>] (__device_release_driver) from [<c02f9080>] (driver_detach+0xb4/0xb8)
[<c02f9080>] (driver_detach) from [<c02f8480>] (bus_remove_driver+0x5c/0xc4)
[<c02f8480>] (bus_remove_driver) from [<c008c9b8>] (SyS_delete_module+0x148/0x1d8)
[<c008c9b8>] (SyS_delete_module) from [<c000ef80>] (ret_fast_syscall+0x0/0x48)
FIX kmalloc-128: Object at 0xed08e8d0 not freed

Fixes: fcb0ee6a (clk: Implement clk_unregister)
Cc: Jiada Wang <jiada_wang@mentor.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>
Cc: stable@vger.kernel.org

Merge tag 'socfpga-clk-fix-for-3.15' of git://git.rocketboards.org/linux-socfpga-next into clk-fixes-socfpga

clk: socfpga: clock fix for v3.15

Currently on 3.15-rc1, the SOCFPGA platform is unable to boot. This patch
fixes the issue and allows the platform to boot.

commit [1771b10d clk: respect the clock dependencies in of_clk_init]
exposed a flaw in the socfpga clock driver and prevents the platform
from booting on 3.15-rc1.

Because the "altr,clk-mgr" is not really a clock, it should not be using
CLK_OF_DECLARE, instead we should be mapping the clk-mgr's base address
one of the functional clock init function. Use the socfpga_pll_init function
to map the clk_mgr_base_addr as this clock should always be initialized first.
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>
Tested-by: NPavel Machek <pavel@denx.de>

The divider returned by clk_divider_bestdiv() is likely to be invalid in case
of power-of-two and table dividers when CLK_SET_RATE_PARENT flag isn't set.

Fixes boot on STiH416 platform.
Signed-off-by: NMaxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: trivial merge conflict & updated changelog]

The Broadcom Kona clock code, as originally written, made use of
unnamed union and struct fields.  This is a feature present in C11,
and is a GNU extension otherwise.  It worked very well for me.

Unfortunately, Russell King reported that this feature was not
supported in a build environment he used, which meant attempting
to build this code failed spectacularly.

Add names to these unnamed fields, and update the code accordingly.
Reported-by: NRussell King <linux@arm.linux.org.uk>
Tested-by: NMarkus Mayer <markus.mayer@linaro.org>
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

The asm-generic, big-endian version of zero_bytemask creates a mask of
bytes preceding the first zero-byte by left shifting ~0ul based on the
position of the first zero byte.

Unfortunately, if the first (top) byte is zero, the output of
prep_zero_mask has only the top bit set, resulting in undefined C
behaviour as we shift left by an amount equal to the width of the type.
As it happens, GCC doesn't manage to spot this through the call to fls(),
but the issue remains if architectures choose to implement their shift
instructions differently.

An example would be arch/arm/ (AArch32), where LSL Rd, Rn, #32 results
in Rd == 0x0, whilst on arch/arm64 (AArch64) LSL Xd, Xn, #64 results in
Xd == Xn.

Rather than check explicitly for the problematic shift, this patch adds
an extra shift by 1, replacing fls with __fls. Since zero_bytemask is
never called with a zero argument (has_zero() is used to check the data
first), we don't need to worry about calling __fls(0), which is
undefined.

Cc: <stable@vger.kernel.org>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This merges the patch to fix possible loss of dirty bit on munmap() or
madvice(DONTNEED).  If there are concurrent writers on other CPU's that
have the unmapped/unneeded page in their TLBs, their writes to the page
could possibly get lost if a third CPU raced with the TLB flush and did
a page_mkclean() before the page was fully written.

Admittedly, if you unmap() or madvice(DONTNEED) an area _while_ another
thread is still busy writing to it, you deserve all the lost writes you
could get.  But we kernel people hold ourselves to higher quality
standards than "crazy people deserve to lose", because, well, we've seen
people do all kinds of crazy things.

So let's get it right, just because we can, and we don't have to worry
about it.

* safe-dirty-tlb-flush:
  mm: split 'tlb_flush_mmu()' into tlb flushing and memory freeing parts

Pull btrfs fixes from Chris Mason.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: limit the path size in send to PATH_MAX
  Btrfs: correctly set profile flags on seqlock retry
  Btrfs: use correct key when repeating search for extent item
  Btrfs: fix inode caching vs tree log
  Btrfs: fix possible memory leaks in open_ctree()
  Btrfs: avoid triggering bug_on() when we fail to start inode caching task
  Btrfs: move btrfs_{set,clear}_and_info() to ctree.h
  btrfs: replace error code from btrfs_drop_extents
  btrfs: Change the hole range to a more accurate value.
  btrfs: fix use-after-free in mount_subvol()

Pull arm fixes from Russell King:
 "A number of fixes for the PJ4/iwmmxt changes which arm-soc forced me
  to take during the merge window.  This stuff should have been better
  tested and sorted out *before* the merge window"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8042/1: iwmmxt: allow to build iWMMXt on Marvell PJ4B
  ARM: 8041/1: pj4: fix cpu_is_pj4 check
  ARM: 8040/1: pj4: properly detect existence of iWMMXt coprocessor
  ARM: 8039/1: pj4: enable iWMMXt only if CONFIG_IWMMXT is set
  ARM: 8038/1: iwmmxt: explicitly check for supported architectures

Pull arm64 fixes from Catalin Marinas:
 - compat renameat2 syscall wiring and __NR_compat_syscalls fix
 - TLB fix for transparent huge pages following switch to generic
   mmu_gather
 - spinlock initialisation for init_mm's context
 - move of_clk_init() earlier
 - Kconfig duplicate entry fix

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: init: Move of_clk_init to time_init
  arm64: initialize spinlock for init_mm's context
  arm64: debug: remove noisy, pointless warning
  arm64: mm: Add THP TLB entries to general mmu_gather
  arm64: add renameat2 compat syscall
  ARM64: Remove duplicated Kconfig entry for "kernel/power/Kconfig"
  arm64: __NR_compat_syscalls fix

Pull irq fixes from Thomas Gleixner:
 "A slighlty large fix for a subtle issue in the CPU hotplug code of
  certain ARM SoCs, where the not yet online cpu needs to setup the cpu
  local timer and needs to set the interrupt affinity to itself.
  Setting interrupt affinity to a not online cpu is prohibited and
  therefor the timer interrupt ends up on the wrong cpu, which leads to
  nasty complications.

  The SoC folks tried to hack around that in the SoC code in some more
  than nasty ways.  The proper solution is to have a way to enforce the
  affinity setting to a not online cpu.  The core patch to the genirq
  code provides that facility and the follow up patches make use of it
  in the GIC interrupt controller and the exynos timer driver.

  The change to the core code has no implications to existing users,
  except for the rename of the locked function and therefor the
  necessary fixup in mips/cavium.  Aside of that, no runtime impact is
  possible, as none of the existing interrupt chips implements anything
  which depends on the force argument of the irq_set_affinity()
  callback"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: Exynos_mct: Register clock event after request_irq()
  clocksource: Exynos_mct: Use irq_force_affinity() in cpu bringup
  irqchip: Gic: Support forced affinity setting
  genirq: Allow forcing cpu affinity of interrupts