This patch removes the selection of AT91_USE_OLD_CLK when selecting
sam9n12 SoC support. This will automatically enable COMMON_CLK_AT91 option
and add support for at91 common clk implementation.
Signed-off-by: NBoris BREZILLON <boris.brezillon@free-electrons.com>
Tested-by: NBo Shen <voice.shen@atmel.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch encloses sam9n12 old clk registration in
"#if defined(CONFIG_OLD_CLK_AT91) #endif" sections.
Signed-off-by: NBoris BREZILLON <boris.brezillon@free-electrons.com>
Tested-by: NBo Shen <voice.shen@atmel.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch removes the selection of AT91_USE_OLD_CLK when selecting
sam9x5 SoCs support. This will automatically enable COMMON_CLK_AT91 option
and add support for at91 common clk implementation.
Signed-off-by: NBoris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch encloses sam9x5 old clk registration in
"#if defined(CONFIG_OLD_CLK_AT91) #endif" sections.
Signed-off-by: NBoris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

atmel_tsadcc is not allowing to use the remaining ADC channels while at91_adc
does. Completely switch to at91_adc and remove the tsadcc platform_data for
at91sam9rl and at91sam9rl based boards.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

atmel_tsadcc is not allowing to use the remaining ADC channels while at91_adc
does. Completely switch to at91_adc and remove the tsadcc platform_data for
at91sam9g45 and at91sam9g45 based boards.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

at91_adc now supports reading a touchscreen for ADCs without a TSMR register.
Enable touchscreen support through at91_adc. This allows to use both a
touchscreen and the remaining ADC channel at the same time.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

The ADC clock needs to be defined to enable the at91_adc driver. It is defined
to the same speed that is used for atmel_tsadcc.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

That include file is now only used by the at91_adc driver, remove it from
include/mach for better driver separation.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

at91_adc now supports reading a touchscreen for ADCs without a TSMR register.
Enable touchscreen support through at91_adc. This allows to use both a
touchscreen and the remaining ADC channel at the same time.

Also, lower the clock for the ADC as it allows to have more stable reads and
this is the speed used by atmel_tsadcc.
It lowers the maximum throughput rate from 440000 samples per second to 12958
samples per second. It shouldn't be an issue as the CPU is not able to keep up
reading samples at that frequency.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Old ADCs, as present on the sam9rl and the sam9g45 don't have a TSMR register
and the touchscreen support should be handled differently.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

num_channels and registers are not used anymore since they are defined inside
the at91_adc driver and assigned by matching the id_table.

Also, remove the mach/at91_adc.h include that is not necessary anymore.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

num_channels and registers are not used anymore since they are defined inside
the at91_adc driver and assigned by matching the id_table.

Also, remove the mach/at91_adc.h include that is not necessary anymore.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This moves the <mach/gpio.h> header in the AT91 platform down
into the machine directory and removes the reliance on
MACH_NEED_GPIO_H from the AT91.

This does not move the platform to GENERIC_GPIO but localize
the remaining work to be done for this to the mach-at91
folder.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
[nicolas.ferre@atmel.com: adapt to newer kernel, add rsi-ews board]
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

My recent commit 871336a9 "ARM: at91: fix broken "if () else" statement"
introduced a typo because of a last-minute fixup. This adds the missing
closing parenthesis.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

It makes no sense for sama5 support to be enabled if we don't
also enable USE_OF. Making this automatic in Kconfig avoids
a possible randconfig conflict between the old and new clock
support code.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NJean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>

If CONFIG_PATA_AT91 is disabled, the code in at91_add_device_cf
is turned into invalid C statements due to the lack of an
expression before the 'else' clause.

This moves the first half of the condition inside of the #ifdef,
which seems to be what the author intended.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>

The pata_at91 driver uses interfaces defined in the sam9_smc
platform code. Since the pata driver can be a loadable module,
we have to export those symbols in order to link cleanly.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>

at91x40 has no support for device tree, but Kconfig allows
us to enable CONFIG_OF anyway, causing a link error in the
at91 reset controller initialization.

The easiest fix is to adapt the existing #ifdef to omit
the broken code on at91x40 where it is never called anyway.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>

at91x40 is different from all the other at91 machines, and it is
impossible to build a kernel that works on both this SoC and
any of the others, even though it is possible to build a noMMU
kernel for any at91 machine.

By turning at91x40 into a separate top-level option, we explicitly
forbid enabling invalid configurations that include mutually exclusive
machines.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>

We can't use "at91_adc" to refer to the at91_adc driver anymore as
the name is used to match an id_table.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

We can't use "at91_adc" to refer to the at91_adc driver anymore as the name is
used to match an id_table.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add PWM clock for AT91 series SoC which include PWM controller.
Signed-off-by: NBo Shen <voice.shen@atmel.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch removes the selection of AT91_USE_OLD_CLK when selecting
sam9261 SoCs support. This will automatically enable COMMON_CLK_AT91 option
and add support for at91 common clk implementation.
Signed-off-by: NJean-Jacques Hiblot <jjhiblot@traphandler.com>
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch encloses sam9261 old clk registration in
"#if defined(CONFIG_OLD_CLK_AT91) #endif" sections.
Signed-off-by: NJean-Jacques Hiblot <jjhiblot@traphandler.com>
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch adds support for the Device Tree on a sam9261-based platform
Signed-off-by: NJean-Jacques Hiblot <jjhiblot@traphandler.com>
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NBoris BREZILLON <b.brezillon.dev@gmail.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch encloses sam9rl old clk registration in
 #if defined(CONFIG_OLD_CLK_AT91)/#endif sections.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NBoris BREZILLON <b.brezillon.dev@gmail.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch prepare the transition to common clk for sam9 dt boards by
replacing the timer init callback.

Clocks registration cannot be done in early init callback (as formerly done
by the old clk implementation) because it requires dynamic allocation
which is not ready yet during early init.

In the other hand, at91 clocks must be registered before
at91sam926x_pit_init is called because PIT (Periodic Interval Timer) driver
request the master clk (mck).

A new function (at91sam9_dt_timer_init) is created to fullfil these needs.
This function registers all at91 clks using the dt definition before
calling the PIT init function.
The device tree clock registration is enabled only if common clk is
selected. Else the old clk registration is been done during
at91_dt_initialize call.
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Add the new names, coming from DT, for the clock lookups.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NBoris BREZILLON <b.brezillon.dev@gmail.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

There was a copy/paste error when reading the nwe_pulse value.
Signed-off-by: NJean-Jacques Hiblot <jjhiblot@traphandler.com>
Acked-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Cc: stable <stable@vger.kernel.org> # 3.3
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NKevin Hilman <khilman@linaro.org>

While <mach/timex.h> isn't used for multi-platform builds since long it
still is for "normal" builds. As the previous patches fix all sites to
not make use of this per-platform file, it can go now for good also for
platforms that are not (yet) converted to multi-platform.

While at it there are no users of CLOCK_TICK_RATE any more, so also drop
the dummy #define.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

The platform specific <mach/timex.h> will be removed in a later patch.
So move its only still used symbol to a different header specific for
the only machine still using it. Also add a few explicit includes of
<mach/hardware.h> that are implicitly available through <mach/timex.h>.
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This passes the errata fix using a GPIO to control the RTS pin
on one of the AT91 chips to use gpiolib instead of the
AT91-specific interfaces. Also remove the reliance on
compile-time #defines and the cpu_* check and rely on the
platform passing down the proper GPIO pin through platform
data.

This is a prerequisite for getting rid of the local GPIO
implementation in the AT91 platform and move toward
multiplatform.

The patch also adds device tree support for getting the
RTS GPIO pin from the device tree on DT boot paths.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
[nicolas.ferre@atmel.com: typo, nodes in address ascending order, shrink cmdline]
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This AT91 specific Kconfig option removed the code that dealt with
programmable clocks. Each AT91 SoC embeds programmable clocks and
there is little gain to remove this code in case that such a clock
is not used.
If this option is not selected, it causes certain drivers to fail
to build. We simply remove this option instead of adding code just
to build a workaround.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NKevin Hilman <khilman@linaro.org>

This removes the "depends on SOC_SAM_V7" statement
in a Kconfig section that's under an "if SOC_SAM_V7"
condition (same parameter).
Signed-off-by: NYanis Moreno <yanis.moreno63@gmail.com>
Reviewed-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Document the permissions which the various MT_MEMORY* mapping types
will provide.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The SAMA5D36 chip is the superset product of SAMA5D3x family.

For detail information please refer to:
  http://www.atmel.com/Microsite/sama5d3/default.aspxSigned-off-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NKevin Hilman <khilman@linaro.org>