Enable capturing of raw 32bit IEC958_SUBFRAME.
The 24-bits PCM data can be obtained using iec958 plugin.
Known problem: captured stream may begin with either left or right
subframe. Since the iec958 plugin doesn't decode preamble it may swap
the channels sometime.
Signed-off-by: NTimofei Bondarenko <tim@ipi.ac.ru>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Setting the ADC48K44K greatly improves capture quality at 48k sampling rate.
With this bit clear ADC does ZOH interpolation of every 22th sample at 48k.
At frequencies higher than 48k there ADC performs a little better with
ADC48K44K bit set.
At 44.1k ADC performs a little better with this bit clear.
At frequencies below 44.1k there is no difference.
Signed-off-by: NTimofei Bondarenko <tim@ipi.ac.ru>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added new PCI SSIDs for HP machines with ALC262 codec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added analog loopback support and missing ADC capture mixer for the
STAC92HD71 codec family.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Change loops in ac97_read/write functions to count down to zero
rather than up. Gcc will then use the 'dt' (decrement-and-test) op
instead of an increment/compare op-pair.
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added initial support for the STAC92HD71BXX family of codecs.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The Audio interface on HD2400/HD2600 cards isn't currently detected by
snd-hda-intel. I added missing pci device ids for RV610 and RV630, but
I only had a HD2400 pro card to test, where now the audio interface is
detected (and no need to change patch_atihdmi.c, as the codec vendor id
remains 0x1002aa01 for which we already have an entry there). I also
couldn't test if sound pass-trough is ok (and I don't know how to), but
at least now the device is detected.
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

We have to do fairly accurate counting of the minimal periods, instead
of being lazy and just setting the number to zero as soon as one period
elapses.
Signed-off-by: NJoachim Foerster <JOFT@gmx.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Add ALSA support for the opb_ac97_controller_ref_v1_00_a ip core found
in Xilinx' ML403 reference design.
Known issue: Currently this driver hits a WARN_ON_ONCE(1) statement in
kernel/irq/resend.c (line 70). According to Linus
(http://lkml.org/lkml/2007/8/5/5) this may be ignored, right? I haven't
had a look into this 'problem' yet.
Signed-off-by: NJoachim Foerster <JOFT@gmx.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added support for the dmics and enabled EAPD for several laptops with
STAC9228 cards.
Signed-off-by: NMatthew Ranostay <mranostay@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Simple patch to add the Asus VX1 laptop to the Analog Devices pci quirk list.
Signed-off-by: NTobin Davis <tdavis@dsl-only.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch adds support for 88.2k, 96k, and 128k samplerates
on cmi8738-55 chip.
Analog playback works fine on all channels.
Analog capture works well too, though the extra samples seems
interpolated by hardware.
spdif playback and capture works fine.
Signed-off-by: NTimofei Bondarenko <tim@ipi.ac.ru>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Some small improvements on autocfg stuff:
- sort HP pins by sequence number, too
- move sole mic pin to AUTO_PIN_MIC instead of AUTO_PIN_FRONT_MIC
- ditto for line-in pin
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch improves support for 'SB Live 24-bit Extarnal' USB card.
1) This card can go into muted state when a headphones connected or
disconnected. So notify mixer about changes in headphone jack.
2) Add LED controls and procfs support just as in similar Audigy 2 NX card.
3) Rename 'PCM Capture' conrol to 'Mic Capture' to reflect reality:
the card may adjust microphone input level only.
Signed-off-by: NTimofei Bondarenko <tim@ipi.ac.ru>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

I applied a wrong patch for 'opl3 - simplify exclusive access lock'.
Fixed now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Remove sequencer instrument layer from the tree.
This mechanism hasn't been used much with the actual devices.  The only
reasonable user was OPL3 loader, and now it was rewritten to use hwdep
instead.  So, let's remove the rest of rotten codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Use the exclusive access lock in hwdep instead of the own one.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Use the hwdep device for loading OPL2/3 patch data instead of the
messy sequencer instrument layer.
Due to this change, the sbiload program should be updated, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch supresses an annoying compiler warning that the variable
err may be used uninitialised.
Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch kills these two compilation warnings if
power management is disabled:
sound/pci/ac97/ac97_patch.h:86: warning: 'snd_ac97_restore_status'
declared 'static' but never defined
sound/pci/ac97/ac97_patch.h:87: warning: 'snd_ac97_restore_iec958'
declared 'static' but never defined
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Introduced the global 'slots' option to snd module.  This option provides
an alternative way to handle the order of multiple sound card instances.
It's an easier approach to avoid conflict with hotplug devices, and can
be used together with the existing 'order' option of each card driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Show the current EAPD status and volume-knob status in proc file.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch adds ac97 support for ln2440sbc board from LittleChips.
This board is based on s3c2440 SoC + AC97 Realtek ALC650 codec.
Existing s3c2443 implementation is slightly modified because s3c2440
and s3c2443 have different AC97 interrupts.
Signed-off-by: NIvan Kuten <ivan.kuten@promwad.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch adds full record and playback support for the Samsung Q1
Ultra - Vista model (different codec than the earlier Q1 Ultra models).
Signed-off-by: NTobin Davis <tdavis@dsl-only.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Fix quirk for Shuttle AK32VN.  It works better with DXS_SRC, and needs
HP_ONLY ac97 quirk.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Fixed the print format for debug message.
Spotted by Matthew Wilcox.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch brings some English style improvements throughout the
document, as well as 1 or 2 extra technical details.
Signed-off-by: NMichael Opdenacker <michael@free-electrons.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added the support for Onkyo SE-90PCI and SE-200PCI boards.

Signed-off-by: Shin-ya Okada <sh_okada at d4.dion.ne.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The following patch adds 'Mono Playback Switch' control to WM9712 codec
SoC driver.
Also, it fixes Treble, Bass and Mono playback volume inversion bits.
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added model=laptop for Fujitsu V5505 with Cxt5405 codec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Changed the dmux for STAC9228 from ADC1MUX to ADC0MUX to avoid confusion.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added a dmux to the STAC9228 cards with DMIC support. And added a
STAC_DIGITAL_INPUT_SOURCE macro for repeating mixer code.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added the missing STAC9228 DMIC support.
Also added a new vendor id tag for IDT.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added the missing model string 'eeepc-p701' for ALC662 codec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

* 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (454 commits)
  [POWERPC] Cell IOMMU fixed mapping support
  [POWERPC] Split out the ioid fetching/checking logic
  [POWERPC] Add support to cell_iommu_setup_page_tables() for multiple windows
  [POWERPC] Split out the IOMMU logic from cell_dma_dev_setup()
  [POWERPC] Split cell_iommu_setup_hardware() into two parts
  [POWERPC] Split out the logic that allocates struct iommus
  [POWERPC] Allocate the hash table under 1G on cell
  [POWERPC] Add set_dma_ops() to match get_dma_ops()
  [POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
  [POWERPC] 85xx: Only invalidate TLB0 and TLB1
  [POWERPC] 83xx: Fix typo in mpc837x compatible entries
  [POWERPC] 85xx: convert sbc85* boards to use machine_device_initcall
  [POWERPC] 83xx: rework platform Kconfig
  [POWERPC] 85xx: rework platform Kconfig
  [POWERPC] 86xx: Remove unused IRQ defines
  [POWERPC] QE: Explicitly set address-cells and size cells for muram
  [POWERPC] Convert StorCenter DTS file to /dts-v1/ format.
  [POWERPC] 86xx: Convert all 86xx DTS files to /dts-v1/ format.
  [PPC] Remove 85xx from arch/ppc
  [PPC] Remove 83xx from arch/ppc
  ...

This patch adds support for setting up a fixed IOMMU mapping on certain
cell machines.  For 64-bit devices this avoids the performance overhead of
mapping and unmapping pages at runtime.  32-bit devices are unable to use
the fixed mapping.

The fixed mapping is established at boot, and maps all of physical memory
1:1 into device space at some offset.  On machines with < 30 GB of memory
we setup the fixed mapping immediately above the normal IOMMU window.

For example a machine with 4GB of memory would end up with the normal
IOMMU window from 0-2GB and the fixed mapping window from 2GB to 6GB. In
this case a 64-bit device wishing to DMA to 1GB would be told to DMA to
3GB, plus any offset required by firmware.  The firmware offset is encoded
in the "dma-ranges" property.

On machines with 30GB or more of memory, we are unable to place the fixed
mapping above the normal IOMMU window as we would run out of address space.
Instead we move the normal IOMMU window to coincide with the hash page
table, this region does not need to be part of the fixed mapping as no
device should ever be DMA'ing to it.  We then setup the fixed mapping
from 0 to 32GB.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Split out the ioid fetching and checking logic so we can use it elsewhere
in a subsequent patch.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add support to cell_iommu_setup_page_tables() for handling two windows,
the dynamic window and the fixed window.  A fixed window size of 0
indicates that there is no fixed window at all.

Currently there are no callers who pass a non-zero fixed window, but the
upcoming fixed IOMMU mapping patch will change that.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Split the IOMMU logic out from cell_dma_dev_setup() into a separate
function.  If we're not using dma_direct_ops or dma_iommu_ops we don't
know what the hell's going on, so BUG.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Split cell_iommu_setup_hardware() into two parts.  Split the page table
setup into cell_iommu_setup_page_tables() and the bits that kick the
hardware into cell_iommu_enable_hardware().
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>