Commit c6887cd1 ("Btrfs: don't do nocow check unless we have to")
changed the behavior of __btrfs_buffered_write() so that it first tries
to get a data space reservation, and then skips the relatively expensive
nocow check if the reservation succeeded.

If we have quotas enabled, the data space reservation also includes a
quota reservation.  But in the rewrite case, the space has already been
accounted for in qgroups.  So btrfs_check_data_free_space() increases
the quota reservation, but it never gets decreased when the data
actually gets written and overwrites the pre-existing data.  So we're
left with both the qgroup and qgroup reservation accounting for the same
space.

This commit adds the missing btrfs_qgroup_free_data() call in the case
of BTRFS_ORDERED_PREALLOC extents.

Fixes: c6887cd1 ("Btrfs: don't do nocow check unless we have to")
Signed-off-by: NJustin Maggard <jmaggard@netgear.com>
Reviewed-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The patch from commit a7e3b975 ("Btrfs: fix reported number of inode
blocks") introduced a regression where if we do a buffered write starting
at position equal to or greater than the file's size and then stat(2) the
file before writeback is triggered, the number of used blocks does not
change (unless there's a prealloc/unwritten extent). Example:

  $ xfs_io -f -c "pwrite -S 0xab 0 64K" foobar
  $ du -h foobar
  0	foobar
  $ sync
  $ du -h foobar
  64K	foobar

The first version of that patch didn't had this regression and the second
version, which was the one committed, was made only to address some
performance regression detected by the intel test robots using fs_mark.

This fixes the regression by setting the new delaloc bit in the range, and
doing it at btrfs_dirty_pages() while setting the regular dealloc bit as
well, so that this way we set both bits at once avoiding navigation of the
inode's io tree twice. Doing it at btrfs_dirty_pages() is also the most
meaninful place, as we should set the new dellaloc bit when if we set the
delalloc bit, which happens only if we copied bytes into the pages at
__btrfs_buffered_write().

This was making some of LTP's du tests fail, which can be quickly run
using a command line like the following:

  $ ./runltp -q -p -l /ltp.log -f commands -s du -d /mnt

Fixes: a7e3b975 ("Btrfs: fix reported number of inode blocks")
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

If a file's DIR_ITEM key is invalid (due to memory errors) and gets
written to disk, a future lookup_path can end up with kernel panic due
to BUG_ON().

This gets rid of the BUG_ON(), meanwhile output the corrupted key and
return ENOENT if it's invalid.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reported-by: NGuillaume Bouchard <bouchard@mercs-eng.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Compression code path has only flaged bios with REQ_OP_WRITE no matter
where the bios come from, but it could be a sync write if fsync starts
this writeback or a normal writeback write if wb kthread starts a
periodic writeback.

It breaks the rule that sync writes and writeback writes need to be
differentiated from each other, because from the POV of block layer,
all bios need to be recognized by these flags in order to do some
management, e.g. throttlling.

This passes writeback_control to compression write path so that it can
send bios with proper flags to block layer.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since we do a delalloc reserve in btrfs_truncate_block we can deadlock
with freeze.  If somebody else is trying to allocate metadata for this
inode and it gets stuck in start_delalloc_inodes because of freeze we
will deadlock.  Be safe and move this outside of a trans handle.  This
also has a side-effect of making sure that we're not leaving stale data
behind in the other_encoding or encryption case.  Not an issue now since
nobody uses it, but it would be a problem in the future.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The way we handle delalloc metadata reservations has gotten
progressively more complicated over the years.  There is so much cruft
and weirdness around keeping the reserved count and outstanding counters
consistent and handling the error cases that it's impossible to
understand.

Fix this by making the delalloc block rsv per-inode.  This way we can
calculate the actual size of the outstanding metadata reservations every
time we make a change, and then reserve the delta based on that amount.
This greatly simplifies the code everywhere, and makes the error
handling in btrfs_delalloc_reserve_metadata far less terrifying.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Right now we do a lot of weird hoops around outstanding_extents in order
to keep the extent count consistent.  This is because we logically
transfer the outstanding_extent count from the initial reservation
through the set_delalloc_bits.  This makes it pretty difficult to get a
handle on how and when we need to mess with outstanding_extents.

Fix this by revamping the rules of how we deal with outstanding_extents.
Now instead everybody that is holding on to a delalloc extent is
required to increase the outstanding extents count for itself.  This
means we'll have something like this

btrfs_delalloc_reserve_metadata	- outstanding_extents = 1
 btrfs_set_extent_delalloc	- outstanding_extents = 2
btrfs_release_delalloc_extents	- outstanding_extents = 1

for an initial file write.  Now take the append write where we extend an
existing delalloc range but still under the maximum extent size

btrfs_delalloc_reserve_metadata - outstanding_extents = 2
  btrfs_set_extent_delalloc
    btrfs_set_bit_hook		- outstanding_extents = 3
    btrfs_merge_extent_hook	- outstanding_extents = 2
btrfs_delalloc_release_extents	- outstanding_extnets = 1

In order to make the ordered extent transition we of course must now
make ordered extents carry their own outstanding_extent reservation, so
for cow_file_range we end up with

btrfs_add_ordered_extent	- outstanding_extents = 2
clear_extent_bit		- outstanding_extents = 1
btrfs_remove_ordered_extent	- outstanding_extents = 0

This makes all manipulations of outstanding_extents much more explicit.
Every successful call to btrfs_delalloc_reserve_metadata _must_ now be
combined with btrfs_release_delalloc_extents, even in the error case, as
that is the only function that actually modifies the
outstanding_extents counter.

The drawback to this is now we are much more likely to have transient
cases where outstanding_extents is much larger than it actually should
be.  This could happen before as we manipulated the delalloc bits, but
now it happens basically at every write.  This may put more pressure on
the ENOSPC flushing code, but I think making this code simpler is worth
the cost.  I have another change coming to mitigate this side-effect
somewhat.

I also added trace points for the counter manipulation.  These were used
by a bpf script I wrote to help track down leak issues.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and
offset (encoded as a single logical address) to a list of extent refs.
LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping
(extent ref -> extent bytenr and offset, or logical address).  These are
useful capabilities for programs that manipulate extents and extent
references from userspace (e.g. dedup and defrag utilities).

When the extents are uncompressed (and not encrypted and not other),
check_extent_in_eb performs filtering of the extent refs to remove any
extent refs which do not contain the same extent offset as the 'logical'
parameter's extent offset.  This prevents LOGICAL_INO from returning
references to more than a single block.

To find the set of extent references to an uncompressed extent from [a, b),
userspace has to run a loop like this pseudocode:

	for (i = a; i < b; ++i)
		extent_ref_set += LOGICAL_INO(i);

At each iteration of the loop (up to 32768 iterations for a 128M extent),
data we are interested in is collected in the kernel, then deleted by
the filter in check_extent_in_eb.

When the extents are compressed (or encrypted or other), the 'logical'
parameter must be an extent bytenr (the 'a' parameter in the loop).
No filtering by extent offset is done (or possible?) so the result is
the complete set of extent refs for the entire extent.  This removes
the need for the loop, since we get all the extent refs in one call.

Add an 'ignore_offset' argument to iterate_inodes_from_logical,
[...several levels of function call graph...], and check_extent_in_eb, so
that we can disable the extent offset filtering for uncompressed extents.
This flag can be set by an improved version of the LOGICAL_INO ioctl to
get either behavior as desired.

There is no functional change in this patch.  The new flag is always
false.
Signed-off-by: NZygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ minor coding style fixes ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Preliminary support for setting compression level for zlib, the
following works:

$ mount -o compess=zlib                 # default
$ mount -o compess=zlib0                # same
$ mount -o compess=zlib9                # level 9, slower sync, less data
$ mount -o compess=zlib1                # level 1, faster sync, more data
$ mount -o remount,compress=zlib3	# level set by remount

The compress-force works the same as compress'.  The level is visible in
the same format in /proc/mounts. Level set via file property does not
work yet.

Required patch: "btrfs: prepare for extensions in compression options"
Signed-off-by: NDavid Sterba <dsterba@suse.com>

At few places we could use BLK_STS_OK and BLK_STS_NOSUPP.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NSatoru Taekeuchi <satoru.takeuchi@gmail.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ dropped first hunk btrfs_endio_direct_read ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We need the actual root for the ref verifier tool to work, so change
these functions to pass the root around instead.  This will be used in
a subsequent patch.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Now that we have the combo of flushing twice, which can make sure IO
have started since the second flush will wait for page lock which
won't be unlocked unless setting page writeback and queuing ordered
extents, we don't need %async_submit_draining, %async_delalloc_pages
and %nr_async_submits to tell whether the IO has actually started.

Moreover, all the flushers in use are followed by functions that wait
for ordered extents to complete, so %nr_async_submits, which tracks
whether bio's async submit has made progress, doesn't really make
sense.

However, %async_delalloc_pages is still required by shrink_delalloc()
as that function doesn't flush twice in the normal case (just issues a
writeback with WB_REASON_FS_FREE_SPACE).
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Remove dead assigment of num_bytes.

Also as num_bytes only used in the will_compress block as copy of
total_in just replace that with total_in and drop num_bytes entirely.
Signed-off-by: NTimofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Bool initializations should use true and false. Bool tests don't need
comparisons.
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Was added in:
  c8b97818
  "Btrfs: Add zlib compression support"
Survive to near time (from 08.10.2008).

Because 'start' checked for zero before branch, so it's safe to remove
that subtraction.
Signed-off-by: NTimofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: NSatoru Takeuchi <satoru.takeuchi@gmail.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Introduced by 5a5f79b5 ("Btrfs: allow unaligned DIO") and never
used. The buffered fallback from unaligned DIO works as expected.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NTimofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

While we submit direct writes, if the inode is flagged with nodatasum,
there's no benefit to submit asynchronously, because

a) we don't have to calculate checksum across processors,

b) and direct IO has started a plug, but async submit makes us queue
IO on each device's scheduled IO list instead of DIO's plug list, so
that IOs get much less merges in general.

Lets use sync submit for nodatasum inodes.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

commit 4246a0b6 ("block: add a bi_error field to struct bio")
changed the logic of how dio read endio reports errors.

For single stripe dio read, %bio->bi_status reflects the error before
verifying checksum, and now we're updating it when data block matches
with its checksum, while in the mismatching case, %bio->bi_status is
not updated to relfect that.

When some blocks in a file have been corrupted on disk, reading such a
file ends up with

1) checksum errors are reported in kernel log
2) read(2) returns successfully with some content being 0x01.

In order to fix it, we need to report its checksum mismatch error to
the upper layer (dio layer in this case) as well.

Fixes: 4246a0b6 ("block: add a bi_error field to struct bio")
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reported-by: NGoffredo Baroncelli <kreijack@inwind.it>
Tested-by: NGoffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

__endio_write_update_ordered() repeats the search until it reaches the end
of the specified range. This works well with direct IO path, because before
the function is called, it's ensured that there are ordered extents filling
whole the range. It's not the case, however, when it's called from
run_delalloc_range(): it is possible to have error in the midle of the loop
in e.g. run_delalloc_nocow(), so that there exisits the range not covered
by any ordered extents. By cleaning such "uncomplete" range,
__endio_write_update_ordered() stucks at offset where there're no ordered
extents.

Since the ordered extents are created from head to tail, we can stop the
search if there are no offset progress.

Fixes: 52427260 ("btrfs: Handle delalloc error correctly to avoid ordered extent hang")
Cc: <stable@vger.kernel.org> # 4.12
Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: NQu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Commit 52427260 ("btrfs: Handle delalloc error correctly to avoid
ordered extent hang") introduced btrfs_cleanup_ordered_extents() to cleanup
submitted ordered extents. However, it does not clear the ordered bit
(Private2) of corresponding pages. Thus, the following BUG occurs from
free_pages_check_bad() (on btrfs/125 with nospace_cache).

BUG: Bad page state in process btrfs  pfn:3fa787
page:ffffdf2acfe9e1c0 count:0 mapcount:0 mapping:          (null) index:0xd
flags: 0x8000000000002008(uptodate|private_2)
raw: 8000000000002008 0000000000000000 000000000000000d 00000000ffffffff
raw: ffffdf2acf5c1b20 ffffb443802238b0 0000000000000000 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
bad because of flags: 0x2000(private_2)

This patch clears the flag same as other places calling
btrfs_dec_test_ordered_pending() for every page in the specified range.

Fixes: 52427260 ("btrfs: Handle delalloc error correctly to avoid ordered extent hang")
Cc: <stable@vger.kernel.org> # 4.12
Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: NQu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This fixes several instances of blk_status_t and bare errno ints being
mixed up, some of which are real bugs.

In the normal case, 0 matches BLK_STS_OK, so we don't observe any
effects of the missing conversion, but in case of errors or passes
through the repair/retry paths, the errors get mixed up.

The changes were identified using 'sparse', we don't have reports of the
buggy behaviour.

Fixes: 4e4cbee9 ("block: switch bios to blk_status_t")
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Commit 38851cc1 ("Btrfs: implement unlocked dio write") implemented
unlocked dio write, allowing multiple dio writers to write to
non-overlapping, and non-eof-extending regions. In doing so it also
introduced a broken memory barrier. It is broken due to 2 things:

1. Memory barriers _MUST_ always be paired, this is clearly not the case
   here

2. Checkpatch actually produces a warning if a memory barrier is
   introduced that doesn't have a comment explaining how it's being
   paired.

Specifically for inode::i_dio_count that's wrapped inside
inode_dio_begin, there is no explicit barrier semantics attached, so
removing is fine as the atomic is used in common the waiter/wakeup
pattern.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ enhance changelog ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently the code checks whether we should do data checksumming in
btrfs_submit_direct and the boolean result of this check is passed to
btrfs_submit_direct_hook, in turn passing it to __btrfs_submit_dio_bio which
actually consumes it. The last function actually has all the necessary context
to figure out whether to skip the check or not, so let's move the check closer
to where it's being consumed. No functional changes.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NChris Mason <clm@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

If the range being cleared was not marked for defrag and we are not
about to clear the range from the defrag status, we don't need to
lock and unlock the inode.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NChris Mason <clm@fb.com>
Reviewed-by: NWang Shilong <wangshilong1991@gmail.com>
Signed-off-by: NChris Mason <clm@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Readdir does dir_emit while under the btree lock.  dir_emit can trigger
the page fault which means we can deadlock.  Fix this by allocating a
buffer on opening a directory and copying the readdir into this buffer
and doing dir_emit from outside of the tree lock.

Thread A
readdir  <holding tree lock>
  dir_emit
    <page fault>
      down_read(mmap_sem)

Thread B
mmap write
  down_write(mmap_sem)
    page_mkwrite
      wait_ordered_extents

Process C
finish_ordered_extent
  insert_reserved_file_extent
   try to lock leaf <hang>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ copy the deadlock scenario to changelog ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently, the BTRFS_INODE_NOCOMPRESS will prevent any compression on a
given file, except when the mount is force-compress. As users have
reported on IRC, this will also prevent compression when requested by
defrag (btrfs fi defrag -c file).

The nocompress flag is set automatically by filesystem when the ratios
are bad and the user would have to manually drop the bit in order to
make defrag -c work. This is not good from the usability perspective.

This patch will raise priority for the defrag -c over nocompress, ie.
any file with NOCOMPRESS bit set will get defragmented. The bit will
remain untouched.

Alternate option was to also drop the nocompress bit and keep the
decision logic as is, but I think this is not the right solution.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Add new value for compression to distinguish between defrag and
property. Previously, a single variable was used and this caused clashes
when the per-file 'compression' was set and a defrag -c was called.

The property-compression is loaded when the file is open, defrag will
overwrite the same variable and reset to 0 (ie. NONE) at when the file
defragmentaion is finished. That's considered a usability bug.

Now we won't touch the property value, use the defrag-compression. The
precedence of defrag is higher than for property (and whole-filesystem).
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This is preparatory for separating inode compression requested by defrag
and set via properties. This will fix a usability bug when defrag will
reset compression type to NONE. If the file has compression set via
property, it will not apply anymore (until next mount or reset through
command line).

We're going to fix that by adding another variable just for the defrag
call and won't touch the property. The defrag will have higher priority
when deciding whether to compress the data.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Add skeleton code for compresison heuristics. Now it iterates over all
the pages, but in the end always says "yes, compress please", ie it does
not change the current behaviour.

In the future we're going to add various heuristics to analyze the data.
This patch can be used as a baseline for measuring if the effectivness
and performance.
Signed-off-by: NTimofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ enhanced changelog, modified comments ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Correctly account for IO when waiting for a submitted DIO read, the case
when we're retrying.  This only for the accounting purposes and should
not change other behaviour.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NDavid Sterba <dsterba@suse.com>

Unify types of local variables and parameters that store various
REQ_* values to unsigned int.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

btrfs_new_inode() is the only consumer move it to inode.c,
from ioctl.c.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The helpers append "\n" so we can keep the actual strings shorter. The
extra newline will print an empty line.  Some messages have been
slightly modified to be more consistent with the rest (lowercase first
letter).
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When btrfs fails the checksum check, it'll fill the whole page with
"1".

However, if %csum_expected is 0 (which means there is no checksum), then
for some unknown reason, we just pretend that the read is correct, so
userspace would be confused about the dilemma that read is successful but
getting a page with all content being "1".

This can happen due to a bug in btrfs-convert.

This fixes it by always returning errors if checksum doesn't match.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Firstly by applying the following with coccinelle's spatch:

	@@ expression SB; @@
	-SB->s_flags & MS_RDONLY
	+sb_rdonly(SB)

to effect the conversion to sb_rdonly(sb), then by applying:

	@@ expression A, SB; @@
	(
	-(!sb_rdonly(SB)) && A
	+!sb_rdonly(SB) && A
	|
	-A != (sb_rdonly(SB))
	+A != sb_rdonly(SB)
	|
	-A == (sb_rdonly(SB))
	+A == sb_rdonly(SB)
	|
	-!(sb_rdonly(SB))
	+!sb_rdonly(SB)
	|
	-A && (sb_rdonly(SB))
	+A && sb_rdonly(SB)
	|
	-A || (sb_rdonly(SB))
	+A || sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) != A
	+sb_rdonly(SB) != A
	|
	-(sb_rdonly(SB)) == A
	+sb_rdonly(SB) == A
	|
	-(sb_rdonly(SB)) && A
	+sb_rdonly(SB) && A
	|
	-(sb_rdonly(SB)) || A
	+sb_rdonly(SB) || A
	)

	@@ expression A, B, SB; @@
	(
	-(sb_rdonly(SB)) ? 1 : 0
	+sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) ? A : B
	+sb_rdonly(SB) ? A : B
	)

to remove left over excess bracketage and finally by applying:

	@@ expression A, SB; @@
	(
	-(A & MS_RDONLY) != sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
	|
	-(A & MS_RDONLY) == sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
	)

to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

As the function uses the non-failing bio allocation, we can remove error
handling from the callers as well.
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We've started using cloned bios more in 4.13, there are some specifics
regarding the iteration.  Filipe found [1] that the raid56 iterated a
cloned bio using bio_for_each_segment_all, which is incorrect. The
cloned bios have wrong bi_vcnt and this could lead to silent
corruptions.  This patch adds assertions to all remaining
bio_for_each_segment_all cases.

[1] https://patchwork.kernel.org/patch/9838535/Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

[BUG]
For the following case, btrfs can underflow qgroup reserved space
at an error path:
(Page size 4K, function name without "btrfs_" prefix)

         Task A                  |             Task B
----------------------------------------------------------------------
Buffered_write [0, 2K)           |
|- check_data_free_space()       |
|  |- qgroup_reserve_data()      |
|     Range aligned to page      |
|     range [0, 4K)          <<< |
|     4K bytes reserved      <<< |
|- copy pages to page cache      |
                                 | Buffered_write [2K, 4K)
                                 | |- check_data_free_space()
                                 | |  |- qgroup_reserved_data()
                                 | |     Range alinged to page
                                 | |     range [0, 4K)
                                 | |     Already reserved by A <<<
                                 | |     0 bytes reserved      <<<
                                 | |- delalloc_reserve_metadata()
                                 | |  And it *FAILED* (Maybe EQUOTA)
                                 | |- free_reserved_data_space()
                                      |- qgroup_free_data()
                                         Range aligned to page range
                                         [0, 4K)
                                         Freeing 4K
(Special thanks to Chandan for the detailed report and analyse)

[CAUSE]
Above Task B is freeing reserved data range [0, 4K) which is actually
reserved by Task A.

And at writeback time, page dirty by Task A will go through writeback
routine, which will free 4K reserved data space at file extent insert
time, causing the qgroup underflow.

[FIX]
For btrfs_qgroup_free_data(), add @reserved parameter to only free
data ranges reserved by previous btrfs_qgroup_reserve_data().
So in above case, Task B will try to free 0 byte, so no underflow.
Reported-by: NChandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: NChandan Rajendra <chandan@linux.vnet.ibm.com>
Tested-by: NChandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Introduce a new parameter, struct extent_changeset for
btrfs_qgroup_reserved_data() and its callers.

Such extent_changeset was used in btrfs_qgroup_reserve_data() to record
which range it reserved in current reserve, so it can free it in error
paths.

The reason we need to export it to callers is, at buffered write error
path, without knowing what exactly which range we reserved in current
allocation, we can free space which is not reserved by us.

This will lead to qgroup reserved space underflow.
Reviewed-by: NChandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>