This patch fixes the low level debug UART io address as per this series.
The change is essential to have CONFIG_DEBUG_LL working.
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This patch moves SRAM map to free up more kernel address io space.
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This patch remap L3 and L4 io space to get more kernel address space.
With this patch, 512 MB of IO space is reclaimed.
Some more combinations are possible but to make it uniform across
OMAP24XX, OMAP34XX and OMAP4430, these io combinations are chosen

Once this is reviewed and tested sufficiently, a documentation entry can
be created to ease up reading and debugging.
Like "Documentation/arm/omap/io_map.txt"
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This patch splits OMAP2_IO_ADDRESS to OMAP2_L3_IO_ADDRESS and
OMAP2_L4_IO_ADDRESS to reclaim more IO space.

The omap_read*() and omap_write*() functions will work only over
L4 address space. Current omap kernel stack uses these functions
only to access registers over L4 io address space

Note that these macros should only be used when ioremap does
not work. Please use ioremap instead in all new code.
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Use ioremap for omap4 L4 code
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Use getnstimeofday for omap_device
Acked-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Use ioremap in omap_hwmod.c
Acked-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Use ioremap in gpio.c
Signed-off-by: NTony Lindgren <tony@atomide.com>

Use ioremap in dmtimer.c
Signed-off-by: NTony Lindgren <tony@atomide.com>

Use ioremap in dma.c
Signed-off-by: NTony Lindgren <tony@atomide.com>

Use ioremap in irq.c
Signed-off-by: NTony Lindgren <tony@atomide.com>

Change low-level serial init to use ioremap
Signed-off-by: NTony Lindgren <tony@atomide.com>

clock24xx.c is missing a omap2_init_clk_clkdm() in its
omap2_clk_init() function.  Among other bad effects, this causes the
OMAP hwmod layer to oops on boot.

Thanks to Carlos Aguiar <carlos.aguiar@indt.org.br> and Stefano
Panella <Stefano.Panella@csr.com> for reporting this bug.  Thanks to Tony
Lindgren <tony@atomide.com> for N800 booting advice.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Carlos Aguiar <carlos.aguiar@indt.org.br>
Cc: Stefano Panella <Stefano.Panella@csr.com>
Cc: Tony Lindgren <tony@atomide.com>

There is a possible race condition in clockdomain
code handling hw supported idle transitions.

When multiple autodeps dependencies are being added
or removed, a transition of still remaining dependent
powerdomain can result in false readings of the
state counter. This is especially fatal for off mode
state counter, as it could result in a driver not
noticing a context loss.

Fixed by disabling hw supported state transitions
when autodeps are being changed.
Signed-off-by: NKalle Jokiniemi <kalle.jokiniemi@digia.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

This small typo written by author causes that McBSP receiver is disabled on
OMAP2430 and OMAP3430 even if only transmitter is stopped. This was noted
with ALSA SoC where simultaneous recording halted if playback was stopped
first.
Signed-off-by: NJarkko Nikula <jhnikula@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This patch initializes the correct SDRC settings required
for DVFS on Zoom2.
Signed-off-by: NTeerth Reddy <teerth@ti.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The I2C-1 bus frequency on RX-51 should be 2.2 MHz. The speed is limited
by TWL5030/GAIA; a higher speed could lead to errors on the interface. The
maximum speed depends on the system clock for GAIA: 2.2 MHz (if 19.2 MHz),
2.4 MHz (26 MHz) or 2.9 MHz (38.4 MHz).
Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Argument tparams was not being used to program
global register GCR.HI_THREAD_RESERVED. This patch fixes the same.
Signed-off-by: NAnuj Aggarwal <anuj.aggarwal@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The symbol CONFIG_ISP1301_OMAP was defined twice in the
defconfig. This was causing the warning:
arch/arm/configs/omap3_beagle_defconfig:972:warning:
 override: reassigning to symbol ISP1301_OMAP
Signed-off-by: NSanjeev Premi <premi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

On ARM, update_mmu_cache() does dcache flush for a page only if
it has a kernel mapping (page_mapping(page) != NULL). The correct
behavior would be to force the flush based on dcache_dirty bit only.

One of the cases where present logic would be a problem is when
a RAM based block device[1] is used as a swap disk. In this case,
we would have in-memory data corruption as shown in steps below:

do_swap_page()
{
    - Allocate a new page (if not already in swap cache)
    - Issue read from swap disk
        - Block driver issues flush_dcache_page()
        - flush_dcache_page() simply sets PG_dcache_dirty bit and does not
          actually issue a flush since this page has no user space mapping yet.
    - Now, if swap disk is almost full, this newly read page is removed
      from swap cache and corrsponding swap slot is freed.
    - Map this page anonymously in user space.
    - update_mmu_cache()
        - Since this page does not have kernel mapping (its not in page/swap
          cache and is mapped anonymously), it does not issue dcache flush
          even if dcache_dirty bit is set by flush_dcache_page() above.

    <user now gets stale data since dcache was never flushed>
}

Same problem exists on mips too.

[1] example:
 - brd (RAM based block device)
 - ramzswap (RAM based compressed swap device)
Signed-off-by: NNitin Gupta <ngupta@vflare.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

PXA27x Errata #37 implies system will hang when switching into or out of
half turbo (HT bit in CLKCFG) mode, workaround this by not using it.
Signed-off-by: NDennis O'Brien <dennis.obrien@eqware.net>
Cc: stable-2.6.31 <stable@kernel.org>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Currently the irq_type field of the csb726_lan_config structure is
initialized twice.  The value in the first case,
SMSC911X_IRQ_POLARITY_ACTIVE_LOW, is normally stored in the irq_polarity
field, so I have renamed the field in the first initialization to that.
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>

Seemingly this support was missed when highmem was added, so
DEBUG_HIGHMEM wouldn't have checked the kmap_atomic type.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Bit testing (test, testset, testclear, testchange) for bit numbers
known at compile time returns a word with the tested-for bit set.

Change it to return a true boolean value so to make it consistent with
the out-of-line path and all the other bitops implementations.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Make die() better match x86:
- add printing of the last accessed sysfs file
- ensure console_verbose() is called under the lock
- ensure we panic outside of oops_exit()
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

dump_mem and dump_backtrace were both using multiple printk statements
to print each line.  With DEBUG_LL enabled, this causes OOPS to become
very difficult to read.  Solve this by only using one printk per line.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The clock generation system in the ep93xx uses two external oscillator's
and two internal PLLs to derive all the internal clocks.  Many of these
internal clocks can be stopped to save power.

This introduces a "parent" hierarchy for the clocks so that the users
count can be correctly tracked for power management.

The "parent" for the video clock can either be one of the PLL outputs
or the external oscillator.  In order to correctly track the "parent"
for the video clock calc_clk_div() needed to be modified.  It now
returns an error code if the desired rate cannot be generated.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NRyan Mallon <ryan@bluewatersys.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Update the ep93xx i2c support:

  1) The platform init code passes the configuration data for the
     i2c-gpio driver.  This allows any gpio pin do be used for the
     sda and scl pins.  It also allows the platform to specify the
     udelay and timeout.
  2) Program the gpio configuration register to enable/disable the
     open drain drivers.  Note that this really only works if the
     sda and scl pins are set to EP93XX_GPIO_LINE_EEDAT and
     EP93XX_GPIO_LINE_EECLK.
  3) Update the edb93xx.c platform init to use the new support.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NRyan Mallon <ryan@bluewatersys.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Most of the EP93XX_GPIO_*_INT_* register defines in ep93xx-regs.h
not required due to how the ep93xx core and gpiolib support handle
gpio interrupts.  Remove the defines to prevent future confusion.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NRyan Mallon <ryan@bluewatersys.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This adds the OMAP850 JTAG ID to the IDs checked by OMAP uncompress.h putc.
Without this putc hangs up trying to check the uarts and zImage crashes.
Signed-off-by: NAlistair Buxton <a.j.buxton@gmail.com>

This just makes the same warning be printed on omap850 and omap730.
Signed-off-by: NAlistair Buxton <a.j.buxton@gmail.com>

These clocks are required for booting.
Signed-off-by: NAngelo Arrifano <miknix@gmail.com>
Signed-off-by: NAlistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: NZebediah C. McClure <zmc@lurian.net>

This patch is part of a series which removes references to omap730 in code
which is shared with omap850, replacing them with references to omap7xx.

This updates all the remaining omap730 references in miscellaneous local
variables, macros and similar.
Signed-off-by: NAlistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: NZebediah C. McClure <zmc@lurian.net>

This patch is part of a series which removes references to omap730 in code
which is shared with omap850, replacing them with references to omap7xx.

Turns INT_730_* to INT_7XX_* for definitions in irqs.h and all users.
Signed-off-by: NAlistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: NZebediah C. McClure <zmc@lurian.net>

This patch is part of a series which removes references to omap730 in code
which is shared with omap850, replacing them with references to omap7xx.
Signed-off-by: NAlistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: NZebediah C. McClure <zmc@lurian.net>

This patch is part of a series which removes references to omap730 in code
which is shared with omap850, replacing them with references to omap7xx.

This include file is intended to replace omap730.h and omap850.h
All values defined herein are identical to those in both the old files.
Signed-off-by: NAlistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: NZebediah C. McClure <zmc@lurian.net>

This patch is part of a series which unifies all duplicated code between
omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and
CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks.
Signed-off-by: NAlistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: NZebediah C. McClure <zmc@lurian.net>

This patch is part of a series which unifies all duplicated code between
omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and
CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks.

This file had no omap850 specific code. Initial clock support was done in
the Linwizard tree by Zebediah C. McClure.
Signed-off-by: NAlistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: NZebediah C. McClure <zmc@lurian.net>