- 13 9月, 2006 7 次提交
-
-
由 Olof Johansson 提交于
Introduce PWRficient PA6T cputable entries and feature bits. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
The performance monitor implementation (including CTRL register behaviour) is just included in PPC v2 as an example, it's not truly part of the base. It's actually a somewhat misleading feature, but I'll leave that be for now: The presence of the register is not what the feature bit is used for, but instead it's used to determine if it contains the runlatch bit for idle reporting of the performance monitor. For alternative implementations, the register might still exist but the bit might have different meaning (or no meaning at all). For now, split it off and don't include it in CPU_FTR_PPCAS_ARCH_V2_BASE. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Reduce default cacheline size on 64-bit powerpc from 128 bytes to 64. This is the architected minimum. In most cases we'll still end up using cache line information from the device tree, but defaults are used during early boot and doing a few dcbst/icbi's too many there won't do any harm. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Josh Boyer 提交于
The following patch allows XMON to run on the 4xx platform. Tested on Walnut, Ebony, and Nova (440GX based) eval boards. 440EP, 440SP, and 440SPE boards should work as well. Patch is against 2.6.18-rc6. Signed-off-by: NJosh Boyer <jdub@us.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Corey Minyard 提交于
Allow the pm_power_off function variable in PPC to work as an override. This makes the function consistent with the other architectures and it allows generic poweroff operations (like those provided in IPMI systems) to work properly on PPC. Signed-off-by: NCorey Minyard <minyard@acm.org> Cc: Joseph Barnett <jbarnett@motorola.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Will Schmidt 提交于
In an attempt to make it easier for a power5 optimized app to run on a power4 or a 970 or random earlier machine, this provides emulation of the popcntb instruction. Signed-off-by: NWill Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
As part of the new irq code pseries_kexec_cpu_down() was split into a xics and mpic version. The vpa unregister logic is now only done in the xics routine, and although that's ok in practice (we don't have SPLPAR machines with mpic), I'd rather have the two concepts stay separate. So move the vpa unregister into pseries_kexec_cpu_down(), which gets called by both the xics and mpic routines. This also gives us an obvious place to put any new kexec-down logic needed in future. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 31 8月, 2006 25 次提交
-
-
由 Paul Mackerras 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix return value from memcpy [POWERPC] iseries: Define insw et al. so libata/ide will compile [POWERPC] Fix irq enable/disable in smp_generic_take_timebase [POWERPC] Fix problem with time not advancing on 32-bit platforms [POWERPC] Restore copyright notice in arch/powerpc/kernel/fpu.S [POWERPC] Fix up ibm_architecture_vec definition [POWERPC] Make OF irq map code detect more error cases [POWERPC] Support for "weird" MPICs and fixup mpc7448_hpc2 [POWERPC] Fix MPIC sense codes in documentation [POWERPC] Fix performance regression in IRQ radix tree locking [POWERPC] Add mpc7448hpc2 device tree source file [POWERPC] Add MPC8349E MDS device tree source file to arch/powerpc/boot/dts [POWERPC] modify mpc83xx platforms to use new IRQ layer [POWERPC] Adapt ipic driver to new host_ops interface, add set_irq_type to set IRQ sense [POWERPC] back up old school ipic.[hc] to arch/ppc [POWERPC] Use mpc8641hpcn PIC base address from dev tree. [POWERPC] Allow MPC8641 HPCN to build with CONFIG_PCI disabled too. [POWERPC] Fix powerpc 44x_mmu build [POWERPC] Remove flush_dcache_all export
-
由 Paul Mackerras 提交于
This fixes a hang on ppc32. The problem was that I was comparing a 32-bit quantity with a 64-bit quantity, and consequently time wasn't advancing. This makes us use a 64-bit quantity on all platforms, which ends up simplifying the code since we can now get rid of the tb_last_stamp variable (which actually fixes another bug that Ben H and I noticed while going carefully through the code). This works fine on my G4 tibook. Let me know how it goes on your machines. Acked-by: NOlaf Hering <olaf@aepfle.de> Acked-by: NMikael Pettersson <mikpe@it.uu.se> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
The backlight changes that went in had a bug where they could cause the kernel to access an unitialized pointer when blanking if there is no backlight control on a machine. The bug affects atyfb, aty128fb, nvidiafb and rivafb. radeonfb seems to be ok. This fixes it. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Mackerras 提交于
As pointed out by Herbert Xu <herbert@gondor.apana.org.au>, our memcpy implementation didn't return the destination pointer as its return value, and there is code in the kernel that expects that. This fixes it. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Increase default nodes shift to 10, nr_cpus to 1024 [IA64] remove redundant local_irq_save() calls from sn_sal.h [IA64] panic if topology_init kzalloc fails [IA64-SGI] Silent data corruption caused by XPC V2.
-
由 Roland Scheidegger 提交于
The radeon requires a VAP state flush when enabling/disabling vertex programs on the r200 cards. Signed-off-by: NDave Airlie <airlied@linux.ie> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alan Cox 提交于
The following change from -mm is important to 2.6.18 (actually to 2.6.17 but its too late for that). This was contributed over three months ago by VIA to Bartlomiej and nothing happened. As a result the new chipset is now out and Linux won't run on it. By the time 2.6.18 is finalised this will be the defacto standard VIA chipset so support would be a good plan. Tested in -mm for a while, its essentially a PCI ident update but for the bridge chip because VIA do things in weird ways. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Suleiman Souhlal 提交于
It's possible to get an invalid page fault in kernel mode when we try to write out segments from vsyscall32 when dumping core for a 32bit process if the vsyscall32 DSO is not mapped in its address space (which can happen if, for example, ulimit -v 100 is run). Signed-off-by: NSuleiman Souhlal <suleiman@google.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Keith Owens 提交于
The values in init_tss.ist[] can change when an IST event occurs. Save the original IST values for checking stack addresses when debugging or doing stack traces. Signed-off-by: NKeith Owens <kaos@ocs.com.au> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
After all their only point is having them in user space. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
There was a bogus hunk from the genirq merge that essentially broke stack switching for hard interrupts. Remove it since it isn't needed. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
After all their only point is having them in user space. On x86-64 they don't even work in kernel space. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
As a replacement for the earlier removal of the e820 MCFG check we blacklist the Intel SDV with the original BIOS bug that motivated that check. On those machines don't use MMCONFIG. This also adds a new pci=mmconf parameter to override the blacklist. Cc: Greg KH <gregkh@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
The .fill causes miscompilations with some binutils version. Instead just patch the lock prefix in the lock constructs. That is the majority of the cost and should be good enough. Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
The .fill causes miscompilations with some binutils version. Instead just patch the lock prefix in the lock constructs. That is the majority of the cost and should be good enough. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Noticed by Jan Beulich. When the kernel was moved from 1MB to 2MB in 2.6.17 the kernel reservation code wasn't adjusted and it still reserved starting with 1MB. This means 1MB always were lost. This patch fixes this by reserving only starting with _text. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
The unwinder fallback logic still had potential for falling through to the legacy stack trace code without printing an indication (at once serving as a separator) of this. Further, the stack pointer retrieval for the fallback should be as restrictive as possible (in order to avoid having the legacy stack tracer try to access invalid memory). The patch tightens that, but this could certainly be further improved. Also making the call_trace command line option now conditional upon CONFIG_STACK_UNWIND (as it's meaningless otherwise). Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
By hard-coding the cpuid keys for alternative_smp() rather than using the symbolic constant it turned out that incorrect values were used on both i386 (0x68 instead of 0x69) and x86-64 (0x66 instead of 0x68). Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
One open question: Should this added push perhaps be made conditional upon CONFIG_STACK_UNWIND or CONFIG_UNWIND_INFO? [AK: not needed, these are all very slow paths] Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
One open question: Should these added pushes perhaps be made conditional upon CONFIG_STACK_UNWIND or CONFIG_UNWIND_INFO? [AK: Not needed -- these are all very slow paths] Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
The check for the MCFG table being reserved in the e820 map was originally added to detect a broken BIOS in a preproduction Intel SDV. However it also breaks the Apple x86 Macs, which can't supply this properly, but need a working MCFG. With this patch they wouldn't use the MCFG and not work. After some discussion I think it's best to remove the heuristic again. It also failed on some other boxes (although it didn't cause much problems there because old style port access for PCI config space still works as fallback), but the preproduction SDVs can just use pci=nommcfg. Supporting production machines properly is more important. Edgar Hucek did all the debugging work. Cc: Arjan van de Ven <arjan@infradead.org> Cc: Edgar Hucek <hostmaster@ed-soft.at> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SUNLANCE]: Fix probing problem. [SPARC64]: Fix X server hangs due to large pages.
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [STRIP]: Fix neighbour table refcount leak. [IPV6]: ipv6_add_addr should install dstentry earlier [NETLINK]: Call panic if nl_table allocation fails [TCP]: Two RFC3465 Appropriate Byte Count fixes. [IPV6]: SNMPv2 "ipv6IfStatsInAddrErrors" counter error [E100]: Add module option to ignore bad EEPROM checksums. [SCTP]: Fix sctp_primitive_ABORT() call in sctp_close().
-
- 30 8月, 2006 8 次提交
-
-
由 Stephen Rothwell 提交于
These are build fixes that enable (for example) libata and the ide code to actually build on iSeries. The associated hardware will never be supported on legacy iSeries, so the code paths don't actually need to work, but it is useful (especially for a combined kernel) if the code can build. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
Eran Ben-Avi <eranpublic@yahoo.com> pointed out that the arch/ppc version of smp_generic_take_timebase disables interrupts on entry but exits without restoring them. However, both it and the arch/powerpc version have another problem, which is that they use local_irq_disable/enable rather than local_irq_save/restore, and they are called with interrupts disabled. This fixes both problems; it changes a return to a break in the arch/ppc version, and changes both versions to use local_irq_save/restore. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
This fixes a problem introduced in 5db9fa95. The last_jiffy per-cpu variable is only 32 bits on 32-bit machines, but it was being compared with a 64-bit quantity (tb_next_jiffy), which resulted in time not advancing. This fixes it by changing last_jiffy to be 64 bits on all platforms. With this, we no longer need tb_last_stamp as a 32-bit version of tb_last_jiffy, so this gets rid of tb_last_stamp and we just use tb_last_jiffy instead. This also fixes a bug when the boot cpu is not online, because using tb_last_stamp could have caused the wrong timebase origin value to be used when calculating the time of day. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
This code got moved from head.S but the copyright notice on head.S didn't get transferred with it. Noticed by Cort Dougan <cort@fsmlabs.com>. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Will Schmidt 提交于
This problem was noticed by one of the Phyp firmware folks. Our ibm,client-architecture-support call was failing. This corrects the vector length parameters being passed in. Signed-off-by: NWill Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
Device-tree bugs on js20 with some versions of SLOF were causing the interrupt for IDE to not be parsed correctly and fail to boot. This patch adds a bit more sanity checking to the parser to detect some of those errors and fail instead of returning bogus information. The powerpc PCI code can then trigger a fallback that works on those machines. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Zang Roy-r61911 提交于
This adds a new hardware information table for mpic. This enables the mpic code to deal with mpic controllers with different register layouts and hardware behaviours. This introduces CONFIG_MPIC_WEIRD. For boards with non standard mpic controllers, select CONFIG_MPIC_WEIRD and add its hardware information in the mpic_infos[] array. TSI108/109 PIC takes the first index of weird hardware information table. :) The table can be extended. The Tsi108/109 PIC looks like standard OpenPIC but, in fact, is different in register mapping and behavior. The patch does not affect the behavior of standard mpic. If CONFIG_MPIC_WEIRD is not defined, the code is essentially identical to the current code. [benh@kernel.crashing.org: This patch is a slightly cleaned up version of Zang Roy's support for the TSI108 MPIC variant. It also fixes up MPC7448_hpc2 to use the new version of the type macros and changes the way MPIC is selected in Kconfig to better match what is done for other system devices. ] Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Krzysztof Helt 提交于
The current probe table causes ledma and lebuffer "le" devices to get probed twice which is not what we want. Match just "le" and look directly at the parent to get the correct top-level node information. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-