firewire-net:
- set min/max_mtu
- remove fwnet_change_mtu

nes:
- set max_mtu
- clean up nes_netdev_change_mtu

xpnet:
- set min/max_mtu
- remove xpnet_dev_change_mtu

hippi:
- set min/max_mtu
- remove hippi_change_mtu

batman-adv:
- set max_mtu
- remove batadv_interface_change_mtu
- initialization is a little async, not 100% certain that max_mtu is set
  in the optimal place, don't have hardware to test with

rionet:
- set min/max_mtu
- remove rionet_change_mtu

slip:
- set min/max_mtu
- streamline sl_change_mtu

um/net_kern:
- remove pointless ndo_change_mtu

hsi/clients/ssi_protocol:
- use core MTU range checking
- remove now redundant ssip_pn_set_mtu

ipoib:
- set a default max MTU value
- Note: ipoib's actual max MTU can vary, depending on if the device is in
  connected mode or not, so we'll just set the max_mtu value to the max
  possible, and let the ndo_change_mtu function continue to validate any new
  MTU change requests with checks for CM or not. Note that ipoib has no
  min_mtu set, and thus, the network core's mtu > 0 check is the only lower
  bounds here.

mptlan:
- use net core MTU range checking
- remove now redundant mpt_lan_change_mtu

fddi:
- min_mtu = 21, max_mtu = 4470
- remove now redundant fddi_change_mtu (including export)

fjes:
- min_mtu = 8192, max_mtu = 65536
- The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to
  get past the core net MTU range checks so fjes_change_mtu can validate a
  new MTU against what it supports (see fjes_support_mtu in fjes_hw.c)

hsr:
- min_mtu = 0 (calls ether_setup, max_mtu is 1500)

f_phonet:
- min_mtu = 6, max_mtu = 65541

u_ether:
- min_mtu = 14, max_mtu = 15412

phonet/pep-gprs:
- min_mtu = 576, max_mtu = 65530
- remove redundant gprs_set_mtu

CC: netdev@vger.kernel.org
CC: linux-rdma@vger.kernel.org
CC: Stefan Richter <stefanr@s5r6.in-berlin.de>
CC: Faisal Latif <faisal.latif@intel.com>
CC: linux-rdma@vger.kernel.org
CC: Cliff Whickman <cpw@sgi.com>
CC: Robin Holt <robinmholt@gmail.com>
CC: Jes Sorensen <jes@trained-monkey.org>
CC: Marek Lindner <mareklindner@neomailbox.ch>
CC: Simon Wunderlich <sw@simonwunderlich.de>
CC: Antonio Quartulli <a@unstable.cc>
CC: Sathya Prakash <sathya.prakash@broadcom.com>
CC: Chaitra P B <chaitra.basappa@broadcom.com>
CC: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
CC: MPT-FusionLinux.pdl@broadcom.com
CC: Sebastian Reichel <sre@kernel.org>
CC: Felipe Balbi <balbi@kernel.org>
CC: Arvid Brodin <arvid.brodin@alten.se>
CC: Remi Denis-Courmont <courmisch@gmail.com>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves nes vendor's specific structures to
common UAPI folder which will be visible to all consumers.

These structures are used by user-space library driver
(libmlx4) and currently manually copied to that library.

This move will allow cross-compile against these files and
simplify introduction of vendor specific data.
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

alloc_ordered_workqueue() replaces deprecated
create_singlethread_workqueue().

The workqueue "event_wq" queues work item &event->event_work and the
workqueue "disconn_wq" queues work item work (maps to
g_cm_core->disconn_wq).

WQ_MEM_RECLAIM has not been set since the workqueues are not being used
on a memory reclaim path.
Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

And remove the sysfs in favor of the core version.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There is no need to duplicate a lot of code that is in the kernel library for ages.
Replace duplicating code by calling to print_hex_dump() directly.

Note that output is slightly changed:
- hex and ascii parts have just two spaces delimeter
- there is no delimeter for ascii portions
- file and line removed from prefix (they were redundant anyway since previous
  output shows same closer enough)
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NTatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This function compiles to 550 bytes of machine code.
Three callsites, all in nes_create_qp.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
CC: Faisal Latif <faisal.latif@intel.com>
CC: Doug Ledford <dledford@redhat.com>
CC: linux-rdma@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Reviewed-By: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Adding sq and rq drain functions, which block until all
previously posted wr-s in the specified queue have completed.
A completion object is signaled to unblock the thread,
when the last cqe for the corresponding queue is processed.
Signed-off-by: NTatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: NFaisal Latif <faisal.latif@intel.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The SRP initiator allows to set max_sectors to a value that exceeds
the largest amount of data that can be mapped at once with an mlx4
HCA using fast registration and a page size of 4 KB. Hence modify
ib_map_mr_sg() such that it can map partial sg-elements. If an
sg-element has been mapped partially, let the caller know
which fraction has been mapped by adjusting *sg_offset.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Tested-by: NLaurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Replace all trans_start updates with netif_trans_update helper.
change was done via spatch:

struct net_device *d;
@@
- d->trans_start = jiffies
+ netif_trans_update(d)

Compile tested only.

Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: linux-xtensa@linux-xtensa.org
Cc: linux1394-devel@lists.sourceforge.net
Cc: linux-rdma@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Cc: linux-can@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-hams@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Cc: b.a.t.m.a.n@lists.open-mesh.org
Cc: linux-bluetooth@vger.kernel.org
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: NMugunthan V N <mugunthanvnm@ti.com>
Acked-by: NAntonio Quartulli <a@unstable.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alternatively one could free the skb, OTOH I don't think this test is
useful so just remove it.

Cc: <linux-rdma@vger.kernel.org>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ndo_start_xmit never returns it to stack, but nes_nic_send helper used it if
skb could not be queued to hardware.  Switch to bool instead.

Cc: <linux-rdma@vger.kernel.org>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that most of the port mapper code been moved to iwcm, we can
remove it from port mapper service user drivers.
Signed-off-by: NMustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: NTatyana E. Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: NFaisal Latif <faisal.latif@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Passing udata to the vendor's driver in order to pass data from the
user-space driver to the kernel-space driver. This data will be
used in downstream patches.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Since create_singlethread_workqueue uses kzalloc internally,
it can fail when the system is under memory pressure, so need
to handle it.
Signed-off-by: NInsu Yun <wuninsu@gmail.com>
Reviewed-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

GRO is simpler to use than the old inet_lro library, and is compatible
with forwarding and bridging configurations.

Compile-tested only.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

GRO is simpler to use than the old inet_lro library, and is compatible
with forwarding and bridging configurations.

Compile-tested only.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use eth_zero_addr to assign the zero address to the given address
array instead of memset when second argument is address of zero.
Signed-off-by: NLucas Tanure <tanure@linux.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

nes_reg_phys_mr() returns ERR_PTRs on error.  It doesn't return NULL.

This bug has been there for a while, but we recently changed from
calling a function pointer to calling nes_reg_phys_mr() directly so now
Smatch is able to detect the bug.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The nes_cm_ops structure is never modified, so declare it as const.

Done with the help of Coccinelle.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Just pass and address/size pair instead of an ib_phys_buf array.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Remove the unused ib_allow_mw and ib_bind_mw functions, remove the
unused IB_WR_BIND_MW and IB_WC_BIND_MW opcodes and move ib_dealloc_mw
into the uverbs module.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We have stopped using phys MRs in the kernel a while ago, so let's
remove all the cruft used to implement them.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-By: Devesh Sharma<devesh.sharma@avagotech.com> [ocrdma]
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

No ULP uses it anymore, go ahead and remove it.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Support the new memory registration API by allocating a
private page list array in nes_mr and populate it when
nes_map_mr_sg is invoked. Also, support IB_WR_REG_MR
by duplicating IB_WR_FAST_REG_MR handling and take the
needed information from different places:
- page_size, iova, length (ib_mr)
- page array (nes_mr)
- key, access flags (ib_reg_wr)

The IB_WR_FAST_REG_MR handlers will be removed later when
all the ULPs will be converted.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Many drivers initialize uselessly n_priv_flags, n_stats, testinfo_len,
eedump_len & regdump_len fields in their .get_drvinfo() ethtool op.
It's not necessary as these fields is filled in ethtool_get_drvinfo().

v2: removed unused variable
v3: removed another unused variable
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch split up struct ib_send_wr so that all non-trivial verbs
use their own structure which embedds struct ib_send_wr.  This dramaticly
shrinks the size of a WR for most common operations:

sizeof(struct ib_send_wr) (old):	96

sizeof(struct ib_send_wr):		48
sizeof(struct ib_rdma_wr):		64
sizeof(struct ib_atomic_wr):		96
sizeof(struct ib_ud_wr):		88
sizeof(struct ib_fast_reg_wr):		88
sizeof(struct ib_bind_mw_wr):		96
sizeof(struct ib_sig_handover_wr):	80

And with Sagi's pending MR rework the fast registration WR will also be
down to a reasonable size:

sizeof(struct ib_fastreg_wr):		64
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> [srp, srpt]
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> [sunrpc]
Tested-by: NHaggai Eran <haggaie@mellanox.com>
Tested-by: NSagi Grimberg <sagig@mellanox.com>
Tested-by: NSteve Wise <swise@opengridcomputing.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fix for incorrect recording of the MAC address
Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Neighbor resolution doesn't work without this fix
Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to support alternate sized MADs (and variable sized MADs on OPA
devices) add in/out MAD size parameters to the process_mad core call.

In addition, add an out_mad_pkey_index to communicate the pkey index the driver
wishes the MAD stack to use when sending OPA MAD responses.

The out MAD size and the out MAD PKey index are required by the MAD
stack to generate responses on OPA devices.

Furthermore, the in and out MAD parameters are made generic by specifying them
as ib_mad_hdr rather than ib_mad.

Drivers are modified as needed and are protected by BUG_ON flags if the MAD
sizes passed to them is incorrect.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Vendors should be able to pass vendor specific data to/from
user-space via query_device uverb. In order to do this,
we need to pass the vendors' specific udata.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add a new ib_cq_init_attr structure which contains the
previous cqe (minimum number of CQ entries) and comp_vector
(completion vector) in addition to a new flags field.
All vendors' create_cq callbacks are changed in order
to work with the new API.

This commit does not change any functionality.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com> to patch #2Signed-off-by: NDoug Ledford <dledford@redhat.com>

The process_mad device function declares some parameters as "in".  Make those
parameters const and adjust the call tree under process_mad in the various
drivers accordingly.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NHal Rosenstock <hal@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

RDMA/nes: Enable the use of the tos field in the nes driver
Signed-off-by: NFaisal Latif <Faisal.Latif@intel.com>
Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Remove query_protocol callback

Use the new Core Capability bits for:

rdma_protocol_*
rdma_cap_ib_mad
rdma_cap_ib_smi
rdma_cap_ib_cm
rdma_cap_iw_cm
rdma_cap_ib_sa
rdma_cap_ib_mcast
rdma_cap_af_ib
rdma_cap_eth_ah
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

As of commit 5eb620c8 "IB/core: Add helpers for uncached GID and P_Key
searches"; pkey_tbl_len and gid_tbl_len are immutable data which are stored in
the ib_device.

The per port core capability flags to be added later are also immutable data to
be stored in the ib_device object.

In preparation for this create a structure for per port immutable data and
place the pkey and gid table lengths within this structure.

"get_port_immutable" is added as a mandatory device function to allow the
drivers to fill in this data.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add new callback query_protocol() and implement for each HW.

Mapping List:
		node-type	link-layer	transport	protocol
nes		RNIC		ETH		IWARP		IWARP
amso1100	RNIC		ETH		IWARP		IWARP
cxgb3   	RNIC		ETH		IWARP		IWARP
cxgb4   	RNIC		ETH		IWARP		IWARP
usnic   	USNIC_UDP	ETH		USNIC_UDP	USNIC_UDP
ocrdma  	IB_CA		ETH		IB		IBOE
mlx4    	IB_CA		IB/ETH		IB		IB/IBOE
mlx5    	IB_CA		IB		IB		IB
ehca    	IB_CA		IB		IB		IB
ipath   	IB_CA		IB		IB		IB
mthca   	IB_CA		IB		IB		IB
qib     	IB_CA		IB		IB		IB
Signed-off-by: NMichael Wang <yun.wang@profitbricks.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Tested-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NSean Hefty <sean.hefty@intel.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Get the actual (non-mapped) ip/tcp address of the connecting peer from
the port mapper and report the address info to the user space application
at the time of connection establishment
Signed-off-by: NTatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>