- 18 5月, 2008 2 次提交
-
-
由 Lennert Buytenhek 提交于
The CPU's dma_flush_range() operation needs to clean+invalidate the given memory area if the cache is in writeback mode, or do just the invalidate part if the cache is in writethrough mode, but the current proc-arm{925,926,940,946} (incorrectly) do a cache clean in the latter case. This patch fixes that. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Martin Michlmayr reported that fuse complains: ERROR: "copy_page" [fs/fuse/fuse.ko] undefined! so export the needed function. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 11 5月, 2008 13 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5033/1: Unbreak corgi_ssp by registering ssp drivers earlier. [ARM] Orion: clean up addr-map.c after window setting code purge [ARM] Orion: pass proper t_clk into mv643xx_eth [ARM] Orion: use mv643xx_eth driver mbus window handling [ARM] pxa: Fix RCSR handling [ARM] lubbock: fix compilation [ARM] 5032/1: Added cpufreq support for pxa27x CPU [ARM] 5031/1: Indentation correction in cpu-pxa.c. [ARM] 5028/1: pxafb: fix broken "backward compatibility way" in framebuffer [ARM] 4882/2: Correction for S3C2410 clkout generation [ARM] 5027/1: Fixed random memory corruption on pxa suspend cycle. [ARM] 5024/1: Fix some minor clk issues in the MMCI PL18x driver [ARM] 5023/1: Fix broken gpio interrupts on ep93xx ns9xxx: fix sparse warning ns9xxx: check for irq lockups ns9xxx: fix handle_prio_irq to unmask irqs with lower priority
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: rdc: leds build/config fix x86: sysfs cpu?/topology is empty in 2.6.25 (32-bit Intel system) x86: revert commit 709f744f ("x86: bitops asm constraint fixes") x86: restrict keyboard io ports reservation to make ipmi driver work x86: fix fpu restore from sig return x86: remove spew print out about bus to node mapping x86: revert printk format warning change which is for linux-next x86: cleanup PAT cpu validation x86: geode: define geode_has_vsa2() even if CONFIG_MGEODE_LX is not set x86: GEODE: cache results from geode_has_vsa2() and uninline x86: revert geode config dependency
-
由 Linus Torvalds 提交于
The generic semaphore rewrite had a huge performance regression on AIM7 (and potentially other BKL-heavy benchmarks) because the generic semaphores had been rewritten to be simple to understand and fair. The latter, in particular, turns a semaphore-based BKL implementation into a mess of scheduling. The attempt to fix the performance regression failed miserably (see the previous commit 00b41ec2 'Revert "semaphore: fix"'), and so for now the simple and sane approach is to instead just go back to the old spinlock-based BKL implementation that never had any issues like this. This patch also has the advantage of being reported to fix the regression completely according to Yanmin Zhang, unlike the semaphore hack which still left a couple percentage point regression. As a spinlock, the BKL obviously has the potential to be a latency issue, but it's not really any different from any other spinlock in that respect. We do want to get rid of the BKL asap, but that has been the plan for several years. These days, the biggest users are in the tty layer (open/release in particular) and Alan holds out some hope: "tty release is probably a few months away from getting cured - I'm afraid it will almost certainly be the very last user of the BKL in tty to get fixed as it depends on everything else being sanely locked." so while we're not there yet, we do have a plan of action. Tested-by: NYanmin Zhang <yanmin_zhang@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <andi@firstfloor.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alexander Viro <viro@ftp.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This reverts commit bf726eab, as it has been reported to cause a regression with processes stuck in __down(), apparently because some missing wakeup. Quoth Sven Wegener: "I'm currently investigating a regression that has showed up with my last git pull yesterday. Bisecting the commits showed bf726e "semaphore: fix" to be the culprit, reverting it fixed the issue. Symptoms: During heavy filesystem usage (e.g. a kernel compile) I get several compiler processes in uninterruptible sleep, blocking all i/o on the filesystem. System is an Intel Core 2 Quad running a 64bit kernel and userspace. Filesystem is xfs on top of lvm. See below for the output of sysrq-w." See http://lkml.org/lkml/2008/5/10/45 for full report. In the meantime, we can just fix the BKL performance regression by reverting back to the good old BKL spinlock implementation instead, since any sleeping lock will generally perform badly, especially if it tries to be fair. Reported-by: NSven Wegener <sven.wegener@stealer.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
..instead of cooking up its own uglier local version of it. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
It actually makes much more sense there, and we do tend to need it for non-RCU usage too. Moving it to <linux/compiler.h> will allow some other cases that have open-coded the same logic to use the same helper function that RCU has used. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
select NEW_LEDS for now until the Kconfig dependencies have been fixed. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Vaidyanathan Srinivasan 提交于
System topology on intel based system needs to be exported for non-numa case as well. All parts of asm-i386/topology.h has come under #ifdef CONFIG_NUMA after the merge to asm-x86/topology.h /sys/devices/system/cpu/cpu?/topology/* is populated based on ENABLE_TOPO_DEFINES The sysfs cpu topology is not being populated on my dual socket dual core xeon 5160 processor based (x86 32 bit) system. CONFIG_NUMA is not set in my case yet the topology is relevant and useful. irqbalance daemon application depends on topology to build the cpus and package list and it fails on Fedora9 beta since the sysfs topology was not being populated in the 2.6.25 kernel. I am not sure if it was intentional to not define ENABLE_TOPO_DEFINES for non-numa systems. This fix has been tested on the above mentioned dual core, dual socket system. Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
-
由 Simon Holm Thøgersen 提交于
709f744f causes my computer to freeze during the start up of X and my login manger (GDM). It gets to the point where it has shown the default X mouse cursor logo (a big X / cross) and does not respond to anything from that point on. This worked fine before 709f744f, and it works fine with 709f744f reverted on top of Linus' current tree (f74d505b). The revert had conflicts, as far as I can tell due to white space changes. The diff I ended up with is below. It is 100% reproducible. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Helge Wagner 提交于
On some of our (single board computer) boards (x86) we are using an IPMI controller that uses I/O ports 0x62 and 0x66 for a KCS (keyboard controller style) IPMI system interface. Trying to load the openipmi driver fails, because the ports (0x62/0x66) are reserved for keyboard. keyboard reserves the full range 0x60-0x6F while it doesn't need to. Reserve only ports 0x60 and 0x64 for the legacy PS/2 i8042 keyboad controller instead of 0x60-0x6F to allow the openipmi driver to work. [ tglx: added 64bit fixup ] Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
If the task never used fpu, initialize the fpu before restoring the FP state from the signal handler context. This will allocate the fpu state, if the task never needed it before. Reported-and-bisected-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Tested-by: NEric Sesterhenn <snakebyte@gmx.de> Cc: Frederik Deweerdt <deweerdt@free.fr> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Yinghai Lu 提交于
Jeff Garzik pointed out that this printout is not needed. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
commit 62179849 x86: fix setup printk format warning is for linux-next and not for .26 Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 10 5月, 2008 3 次提交
-
-
由 Dmitry Baryshkov 提交于
A lot of stuff in spitz/akita/etc. depends on corgi_ssp to be initialised early. However corgi_ssp initialisation fails, because at that time pxa*-ssp devices don't have drivers. Move ssp earlier in the makefile so they are registered before corgi-ssp. Also move sleep/suspend and cpu-freq to more logical places Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (21 commits) Blackfin Serial Driver: abstract away DLAB differences into header Blackfin Serial Driver: macro away the IER differences between processors [Blackfin] arch: remove useless IRQ_SW_INT defines [Blackfin] arch: protect linux/usb/musb.h include until the driver gets mainlined [Blackfin] arch: protect linux/usb/isp1362.h include until the driver gets mainlined [Blackfin] arch: add EBIU supporting for BF54x EZKIT SMSC LAN911x/LAN921x families embedded ethernet driver [Blackfin] arch: Set spi flash partition on bf527 as like bf548. [Blackfin] arch: fix bug - Remove module will not free L1 memory used [Blackfin] arch: fix wrong header name in comment [Blackfin] arch: Fix BUG - spi flash on bf527 ezkit would fail at mount [Blackfin] arch: add twi_lcd and twi_keypad i2c board info to bf527-ezkit [Blackfin] arch: Add physmap partition for BF527-EZkit [Blackfin] arch: fix gdb testing regression [Blackfin] arch: disable single stepping when delivering a signal [Blackfin] arch: Delete unused (copied from m68k) entries in asm-offsets.c. [Blackfin] arch: In the double fault handler, set up the PT_RETI slot [Blackfin] arch: Support for CPU_FREQ and NOHZ [Blackfin] arch: Functional power management support: Add CPU and platform voltage scaling support [Blackfin] arch: fix bug - breaking the atomic sections code. [Blackfin] arch: Equalize include files: Add VR_CTL masks ...
- 09 5月, 2008 22 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] fix build warning [CIFS] Fixed build warning in is_ip [CIFS] cleanup cifsd completion [CIFS] Remove over-indented code in find_unc(). [CIFS] fix typo [CIFS] Remove duplicate call to mode_to_acl [CIFS] convert usage of implicit booleans to bool [CIFS] fixed compatibility issue with samba refferal request [CIFS] Fix statfs formatting [CIFS] Adds to dns_resolver checking if the server name is an IP addr and skipping upcall in this case. [CIFS] Fix spelling mistake [CIFS] Update cifs version number
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (37 commits) SH: catch negative denormal_subf1() retval in denormal_add() sh: Fix DMAC base address for SH7709S sh: update smc91x platform data for se7206. sh: Stub in cpu_to_node() and friends for NUMA build. sh: intc register modify fix sh: no high level trigger on some sh3 cpus sh: clean up sh7710 and sh7720 intc tables sh: add interrupt ack code to sh3 sh: unify external irq pin code for sh3 sh-sci: avoid writing to nonexistent registers sh-sci: sh7722 lacks scsptr registers sh-sci: improve sh7722 support sh: reset hardware from early printk sh: drain and wait for early printk sh: use sci_out() for early printk sh: add memory resources to /proc/iomem sh: add kernel bss resource sh: fix sh7705 interrupt vector typo sh: update smc91x platform data for se7722 sh: update smc91x platform data for MigoR ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] hmac: Avoid calling virt_to_page on key
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (23 commits) [POWERPC] Remove leftover printk in isa-bridge.c [POWERPC] Remove duplicate #include [POWERPC] Initialize lockdep earlier [POWERPC] Document when printk is useable [POWERPC] Fix bogus paca->_current initialization [POWERPC] Fix of_i2c include for module compilation [POWERPC] Make default cputable entries reflect selected CPU family [POWERPC] spufs: lockdep annotations for spufs_dir_close [POWERPC] spufs: don't requeue victim contex in find_victim if it's not in spu_run [POWERPC] 4xx: Fix PCI mem in sequoia DTS [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver [POWERPC] 4xx: Fix problem with new TLB storage attibute fields on 440x6 core [POWERPC] spufs: spu_create should send inotify IM_CREATE event [POWERPC] spufs: handle faults while the context switch pending flag is set [POWERPC] spufs: fix concurrent delivery of class 0 & 1 exceptions [POWERPC] spufs: try to route SPU interrupts to local node [POWERPC] spufs: set SPU_CONTEXT_SWITCH_PENDING before synchronising SPU irqs [POWERPC] spufs: don't acquire state_mutex interruptible while performing callback [POWERPC] spufs: update master runcntl with context lock held [POWERPC] spufs: fix post-stopped update of MFC_CNTL register ...
-
由 Christoph Hellwig 提交于
m32r can use the generic sys_pipe implementation. The current sys_pipe implementation on m32r only differes from the generic one by passing a lot of additional unused registers to sys_pipe. Reviewed and tested by Hirokazu Takata. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NHirokazu Takata <takata@linux-m32r.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
The cris implementation of sys_pipe only differs from the generic one by taking the BKL before calling do_pipe which isn't not nessecary. Just kill the cris implementation and use the generic one. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: sit: Add missing kfree_skb() on pskb_may_pull() failure. tipc: Increase buffer header to support worst-case device
-
由 Rusty Russell 提交于
Linus found a logic bug: we ignore the version number in a module's vermagic string if we have CONFIG_MODVERSIONS set, but modversions also lets through a module with no __versions section for modprobe --force (with tainting, but still). We should only ignore the start of the vermagic string if the module actually *has* crcs to check. Rather than (say) having an entertaining hissy fit and creating a config option to work around the buggy code. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
We allow missing __versions sections, because modprobe --force strips it. It makes less sense to allow sections where there's no version for a specific symbol the module uses, so disallow that. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
Don't allow a module built without versions altogether to be inserted into a kernel which expects modversions. modprobe --force will strip vermagic as well as modversions, so it won't be effected, but this will make sure that a non-CONFIG_MODVERSIONS module won't be accidentally inserted into a CONFIG_MODVERSIONS kernel. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lennert Buytenhek 提交于
This patch cleans up Orion's addr-map.c a bit after all peripheral window programming code has been moved out into the relevant drivers. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Reviewed-by: NTzachi Perelstein <tzachi@marvell.com> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Lennert Buytenhek 提交于
Pass the Orion TCLK tick rate into the ethernet driver. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Lennert Buytenhek 提交于
Make the Orion 5x platform code use the mbus window handling code that's in the mv643xx_eth driver, instead of programming the GigE block's mbus window registers by hand. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Reviewed-by: NTzachi Perelstein <tzachi@marvell.com> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Roel Kluin 提交于
'ix' is unsigned but denormal_subf1() may return a negative int. Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Nate Case 提交于
This printk() appears twice in the same function. Only the latter one in the inval_range: section appears to be legitimate. Signed-off-by: NNate Case <ncase@xes-inc.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Huang Weiyi 提交于
Remove duplicate #include of <asm/prom.h> in arch/powerpc/kernel/btext.c. Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This moves lockdep_init() to before udbg_early_init() as the later can call things that acquire spinlocks etc... This also makes printk safer to use earlier. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
When debugging early boot problems, it's common to sprinkle printk's all over the place. However, on 64-bit powerpc, this can lead to memory corruption if done too early due to the PACA pointer and lockdep core not being initialized. This adds some comments to early_setup() that document when it is safe to do so in order to save time for whoever has to debug that stuff next. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
When doing lockdep, I had two patches to initialize paca->_current early, one bogus, and one correct. Unfortunately both got merged as the bad one ended up being part of the main lockdep patch by mistake. This causes memory corruption at boot. This removes the offending code. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jochen Friedrich 提交于
Remove #ifdef CONFIG_OF_I2C as this breaks module compilation. Drivers using this header should depend on OF_I2C anyways, so there's no need to make this conditional. Signed-off-by: NJochen Friedrich <jochen@scram.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
Changes the cputable so that various CPU families that have an exclusive CONFIG_ option have a more sensible default entry to use if the specific processor hasn't been identified. This makes the kernel more generally useful when booted on an unknown PVR for things like new 4xx variants. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
Merge branch 'for-2.6.26' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge
-