We're interested in just those symbols/DSOs, so filter out the
unresolved ones.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090812211957.GE3495@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This made it easier to find the firefox threading related
bug.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090811192138.GE18061@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf tools: callchain: Fix sum of percentages to be 100% by displaying amount of ignored chains in fractal mode

When we filter the callchains below a given percentage, we
ignore them and the end result only shows entries that have an
upper percentage than the filter threshold.

It seems to users then that we have an imbalance in the
percentage, as if the sum inside a profiled branch doesn't
reach 100%.

Since in the past there have been real perf report bugs that
showed the same sypmtom, it would be nice to assure the user
that the data is perfect and trustable and it all sums up to
100.00%.

So fix this by displaying the remaining hits that have been
filtered but without more detail than their amount in each
branches. Example while filtering below 50%:

7.73%  [k] delay_tsc
                |
                |--98.22%-- __const_udelay
                |          |
                |          |--86.37%-- ath5k_hw_register_timeout
                |          |          ath5k_hw_noise_floor_calibration
                |          |          ath5k_hw_reset
                |          |          ath5k_reset
                |          |          ath5k_config
                |          |          ieee80211_hw_config
                |          |          |
                |          |          |--88.53%-- ieee80211_scan_work
                |          |          |          worker_thread
                |          |          |          kthread
                |          |          |          child_rip
                |          |           --11.47%-- [...]
                |           --13.63%-- [...]
                 --1.78%-- [...]
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1249690585-9145-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If we recorded with -g option to record the callchain, right now
we require a -g option to perf report as well - and people reported
this as unnecessary complication: the user already specified -g
once, no need to require it a second time.

So if the recording includes call-chains, display the callchain by
default from perf report.

( The user can override this default using "-g none" option from
  perf report. )
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1249690585-9145-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf report: Add debug help for the finding of symbol bugs - show the symtab origin (DSO, build-id, kernel, etc)

Used with perf report --verbose:

[acme@doppio linux-2.6-tip]$ perf report -v | head -16
     5.17%  firefox  /usr/lib64/xulrunner-1.9.1/libxul.so   0x00000000005d8eee f [.] imgContainer::DrawFrameTo(gfxIImageFrame*, gfxIImageFrame*, nsRect&)
     2.56%  firefox  /lib64/libpthread-2.10.1.so            0x0000000000008e02 d [.] __pthread_mutex_lock_internal
     1.94%  firefox  /usr/lib64/xulrunner-1.9.1/libxul.so   0x0000000000d0af8f f [.] SearchTable
     1.75%  firefox  [kernel]                               0xffffffffff60013b k [.] vread_hpet
     1.63%  firefox  /lib64/libpthread-2.10.1.so            0x000000000000a404 d [.] __pthread_mutex_unlock
     1.47%  firefox  /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x00000000000482ea f [.] js_Interpret
     1.42%  firefox  /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x000000000003eda3 f [.] JS_CallTracer
     1.24%  firefox  [kernel]                               0xffffffff8102ca4a k [k] read_hpet
     1.16%  firefox  [kernel]                               0xffffffff810f3dd4 k [k] fget_light
     1.11%  firefox  /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x00000000000567ff f [.] js_TraceObject
     0.98%  firefox  /usr/lib64/firefox-3.5.2/firefox       0x000000000000dd23 b [.] arena_ralloc
[acme@doppio linux-2.6-tip]$

The new field is just after the symbol address. To help in
figuring out symbol resolution bugs.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Brice Goglin reported:

> I can easily sort them by thread id, but I don't know how to match
> my 4 events with each group of 4 lines.

Also report the counter id and the time running/enabled
stats (in case the counter got time-shared).
Reported-by: NBrice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: NBrice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The callchain fractal mode builds each new total hits in a new
branch of profiling by using the parent's hits of the current
branch plus the hits of the children.

This is wrong, the total hits of a branch should be made of the
sum of every children hits, we must ignore the parent hits in
this scope.

This patch also fixes another mistake with the hit counting.

Now the rates are correct.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If you're doing performance testing, you're interested in the
symbols anyway so lets make "--sort comm,dso,symbol" the
default sort option.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: acme@redhat.com
LKML-Reference: <1249467921-10450-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Check whether index is within bounds before testing the element.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: a.p.zijlstra@chello.nl
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A757BCF.40101@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since FORK is now also issued for threads, detect those by
comparing the parent and child PID.

Teach it about EXIT events and ignore them.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Anton noted that for inherited counters the counter-id as provided by
PERF_SAMPLE_ID isn't mappable to the id found through PERF_RECORD_ID
because each inherited counter gets its own id.

His suggestion was to always return the parent counter id, since that
is the primary counter id as exposed. However, these inherited
counters have a unique identifier so that events like
PERF_EVENT_PERIOD and PERF_EVENT_THROTTLE can be specific about which
counter gets modified, which is important when trying to normalize the
sample streams.

This patch removes PERF_EVENT_PERIOD in favour of PERF_SAMPLE_PERIOD,
which is more useful anyway, since changing periods became a lot more
common than initially thought -- rendering PERF_EVENT_PERIOD the less
useful solution (also, PERF_SAMPLE_PERIOD reports the more accurate
value, since it reports the value used to trigger the overflow,
whereas PERF_EVENT_PERIOD simply reports the requested period changed,
which might only take effect on the next cycle).

This still leaves us PERF_EVENT_THROTTLE to consider, but since that
_should_ be a rare occurrence, and linking it to a primary id is the
most useful bit to diagnose the problem, we introduce a
PERF_SAMPLE_STREAM_ID, for those few cases where the full
reconstruction is important.

[Does change the ABI a little, but I see no other way out]
Suggested-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1248095846.15751.8781.camel@twins>

perf record uses -g for logging call graph data but perf report
uses -c to print call graph data. Be consistent and use -g
everywhere for call graph data.

Also update the help text to reflect the current default -
fractal,0.5
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090716104817.803604373@samba.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

[acme@doppio pahole]$ perf report -ns comm,dso,symbol -d /lib64/libc-2.10.1.so -C pahole | head -17
    21.94%      32101  [.] _int_malloc
    20.10%      29402  [.] __GI_strcmp
    16.77%      24533  [.] __tsearch
    12.61%      18450  [.] malloc_consolidate
     6.42%       9394  [.] _int_free
     6.28%       9191  [.] __tfind
     4.56%       6678  [.] __GI___libc_free
     4.46%       6520  [.] _IO_vfprintf_internal
     2.59%       3786  [.] __malloc
     1.17%       1716  [.] __GI_memcpy
[acme@doppio pahole]$
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1247325517-12272-5-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When we filter by column content we may end up with a column
that has the same value for all the lines. So remove that
column and tell its unique value on the top, as a comment.

Example:

  [acme@doppio pahole]$  perf report --sort comm,dso,symbol -d ./build/libdwarves.so.1.0.0 -C pahole | head -15
  # dso: ./build/libdwarves.so.1.0.0
  # comm: pahole
  # Samples: 58409
  #
  # Overhead  Symbol
  # ........  ......
  #
      20.93%  [.] tag__recode_dwarf_type
      14.94%  [.] namespace__recode_dwarf_types
      10.38%  [.] cu__table_add_tag
       6.69%  [.] __die__process_tag
       5.05%  [.] die__process_function
       4.70%  [.] list__for_all_tags
       3.68%  [.] tag__init
       3.48%  [.] die__create_new_parameter
  [acme@doppio pahole]$
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1247325517-12272-3-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Always printing the level info about if it is in the kernel,
hypervisor or userspace as that is in the hist_entry.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1247325517-12272-1-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Auto-adjust column width of perf report output to the
longest occuring string length.

Example:

[acme@doppio pahole]$  perf report --sort comm,dso,symbol | head -13

    12.79%   pahole  /usr/lib64/libdw-0.141.so    [.] __libdw_find_attr
     8.90%   pahole  /lib64/libc-2.10.1.so        [.] _int_malloc
     8.68%   pahole  /usr/lib64/libdw-0.141.so    [.] __libdw_form_val_len
     8.15%   pahole  /lib64/libc-2.10.1.so        [.] __GI_strcmp
     6.80%   pahole  /lib64/libc-2.10.1.so        [.] __tsearch
     5.54%   pahole  ./build/libdwarves.so.1.0.0  [.] tag__recode_dwarf_type
[acme@doppio pahole]$

[acme@doppio pahole]$  perf report --sort comm,dso,symbol -d /lib64/libc-2.10.1.so | head -10

    21.92%   pahole  /lib64/libc-2.10.1.so  [.] _int_malloc
    20.08%   pahole  /lib64/libc-2.10.1.so  [.] __GI_strcmp
    16.75%   pahole  /lib64/libc-2.10.1.so  [.] __tsearch
[acme@doppio pahole]$

Also add these extra options to control the new behaviour:

  -w, --field-width

Force each column width to the provided list, for large terminal
readability.

  -t, --field-separator:

Use a special separator character and don't pad with spaces, replacing
all occurances of this separator in symbol names (and other output) with
a '.' character, that thus it's the only non valid separator.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090711014728.GH3452@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The current callchain displays the overhead rates as absolute:
relative to the total overhead.

This patch provides relative overhead percentage, in which each
branch of the callchain tree is a independant instrumentated object.

This provides a 'fractal' view of the call-chain profile: each
sub-graph looks like a profile in itself - relative to its parent.

You can produce such output by using the "fractal" mode
that you can abbreviate via f, fr, fra, frac, etc...

./perf report -s sym -c fractal

Example:

     8.46%  [k] copy_user_generic_string
                |
                |--52.01%-- generic_file_aio_read
                |          do_sync_read
                |          vfs_read
                |          |
                |          |--97.20%-- sys_pread64
                |          |          system_call_fastpath
                |          |          pread64
                |          |
                |           --2.81%-- sys_read
                |                     system_call_fastpath
                |                     __read
                |
                |--39.85%-- generic_file_buffered_write
                |          __generic_file_aio_write_nolock
                |          generic_file_aio_write
                |          do_sync_write
                |          reiserfs_file_write
                |          vfs_write
                |          |
                |          |--97.05%-- sys_pwrite64
                |          |          system_call_fastpath
                |          |          __pwrite64
                |          |
                |           --2.95%-- sys_write
                |                     system_call_fastpath
                |                     __write_nocancel
[...]
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The default callchain parameters are set to use the flat mode and never
filter any overhead threshold of backtrace.

But flat mode is boring compared to graph mode.
Also the number of callchains may be very high if none is
filtered.

Let's change this to set the graph view and a minimum overhead of 0.5%
as default parameters.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If the user doesn't provide options to tune his callchain output
(ie: if he uses -c without arguments) then the default value passed
in the OPT_CALLBACK_DEFAULT() macro is used.

But it's parsed later by strtok() which will replace comma separators
to a zero. This may segfault as we are using a read-only string.

Use a modifiable one instead, and also fix the "100%" default
minimum threshold value by turning it into a 0 (output every callchains)
as it was intended in the origin.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf report segfaults while trying to handle callchains from a non
callchain data file.

Instead of a segfault, print a useful message to the user.
Reported-by: NJens Axboe <jens.axboe@oracle.com>
Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Certain versions of GCC dont see the initialization that is done here:

  builtin-report.c: In function ‘__cmd_report’:
  builtin-report.c:1038: warning: ‘syms’ may be used uninitialized in this function

So annotate it with a NULL initialization.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This adds the use of colors to signal at a glance the important
overhead thresholds in callchains hit rates.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246558475-10624-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Among perf annotate, perf report and perf top, we can find the
common colored printing of percents according to the following
rules:

    High overhead =  > 5%, colored in red
    Mid overhead =  > 0.5%, colored in green
    Low overhead =  < 0.5%, default color

Factorize these multiple checks in a single function named
percent_color_fprintf() and also provide a get_percent_color()
for sites which print percentages and other things at the same
time.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246558475-10624-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Callchains output may become a burden on a trace because even
rarely hit site are exposed. This can be too much information.

Let the user set a threshold as a minimum percent of hits using
the new pattern for the -c option:

    -c mode,min_percent

Example:

$ perf report -s sym -c flat,4

     8.25%  [k] copy_user_generic_string
             4.19%
                copy_user_generic_string
                generic_file_aio_read
                do_sync_read
                vfs_read
                sys_pread64
                system_call_fastpath
                pread64

     5.39%  [k] search_by_key
     4.63%  0x00000000009e0a
     2.36%  [k] memcpy_c
[...]

$ perf report -s sym -c graph,2

     8.25%  [k] copy_user_generic_string
                |
                |--4.31%-- generic_file_aio_read
                |          do_sync_read
                |          vfs_read
                |          |
                |           --4.19%-- sys_pread64
                |                     system_call_fastpath
                |                     pread64
                |
                 --3.24%-- generic_file_buffered_write
                           __generic_file_aio_write_nolock
                           generic_file_aio_write
                           do_sync_write
                           reiserfs_file_write
                           vfs_write
                           |
                            --3.14%-- sys_pwrite64
                                      system_call_fastpath
                                      __pwrite64

     5.39%  [k] search_by_key
                |
                 --2.23%-- reiserfs_update_sd_size

     4.63%  0x00000000009e0a

     2.36%  [k] memcpy_c
[...]

You can also omit it and it will default to 0.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246558475-10624-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Currently, the printing of callchains is done in a single
vertical level, this is the "flat" mode:

8.25%  [k] copy_user_generic_string
             4.19%
                copy_user_generic_string
                generic_file_aio_read
                do_sync_read
                vfs_read
                sys_pread64
                system_call_fastpath
                pread64

This patch introduces a new "graph" mode which provides a
hierarchical output of factorized paths recursively sorted:

 8.25%  [k] copy_user_generic_string
                |
                |--4.31%-- generic_file_aio_read
                |          do_sync_read
                |          vfs_read
                |          |
                |          |--4.19%-- sys_pread64
                |          |          system_call_fastpath
                |          |          pread64
                |          |
                |           --0.12%-- sys_read
                |                     system_call_fastpath
                |                     __read
                |
                |--3.24%-- generic_file_buffered_write
                |          __generic_file_aio_write_nolock
                |          generic_file_aio_write
                |          do_sync_write
                |          reiserfs_file_write
                |          vfs_write
                |          |
                |          |--3.14%-- sys_pwrite64
                |          |          system_call_fastpath
                |          |          __pwrite64
                |          |
                |           --0.10%-- sys_write
[...]

The command line has then changed.

By providing the -c option, the callchain will output in the
flat mode by default.

But you can override it:

    perf report -c graph

or

    perf report -c flat

You can also pass the abreviated mode:

    perf report -c g

or

    perf report -c gra

will both make use of the graph mode.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246550301-8954-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add the -m/--modules option to perf report and perf annotate,
which enables live module symbol/image loading. To be used
with -k/--vmlinux.

(Also give perf annotate a -P/--full-paths option.)
Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246514986.13293.48.camel@marge.simson.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246514916.13293.46.camel@marge.simson.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf_counter tools: Make symbol loading consistently return number of loaded symbols.
Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246514758.13293.42.camel@marge.simson.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The copy we were using came from another copy I did for the dwarves
(pahole) package, that came from the kernel years ago.

The only function that is used by the perf tools and that isn't in the
kernel is list_del_range, that I'm leaving in the perf tools only for
now.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090701174608.GA5823@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The tools/perf/util/rbtree.c copy already drifted by three
csets:

 4b324126
 4c601178
 16c047ad

So remove the copy and use the lib/rbtree.c directly, sharing
the source code while still generating a separate object file,
since tools/perf uses a far more agressive -O6 switch.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090701152837.GG15682@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Enable -Wextra. This found a few real bugs plus a number
of signed/unsigned type mismatches/uncleanlinesses. It
also required a few annotations

All things considered it was still worth it so lets try with
this enabled for now.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix:

 builtin-report.c: In function ‘hist_entry__add’:
 builtin-report.c:1015: error: case label not within a switch statement
 builtin-report.c:1017: error: break statement not within loop or switch

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch resolves the names, when possible, of each ip
present in the callchains while using the -c option with perf
report.

Example:

5.40%  [k] __d_lookup
             5.37%
                perf_callchain
                perf_counter_overflow
                intel_pmu_handle_irq
                perf_counter_nmi_handler
                notifier_call_chain
                atomic_notifier_call_chain
                notify_die
                do_nmi
                nmi
                do_lookup
                __link_path_walk
                path_walk
                do_path_lookup
                user_path_at
                sys_faccessat
                sys_access
                system_call_fastpath
                0x7fb609846f77

             0.01%
                perf_callchain
                perf_counter_overflow
                intel_pmu_handle_irq
                perf_counter_nmi_handler
                notifier_call_chain
                atomic_notifier_call_chain
                notify_die
                do_nmi
                nmi
                do_lookup
                __link_path_walk
                path_walk
                do_path_lookup
                user_path_at
                sys_faccessat
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246419315-9968-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add a dso for hypervisor samples. We don't get any symbol
information on the ppc64 hypervisor but this at least gives
us a high level summary of the time spent in there.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
LKML-Reference: <20090630230141.182536873@samba.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

PERF_EVENT_MISC_* is not a bitmask, so we have to mask and compare.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
LKML-Reference: <20090630230141.088394681@samba.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

So that we can filter by symbol name.

The 'pfunct' utility in the 'dwarves' package can be used to
create a file with the functions one wants.

Example:

[acme@doppio pahole]$ pfunct /usr/lib/debug/usr/lib64/libdw-0.141.so.debug | grep dwarf > /tmp/dwarf.symbols
[acme@doppio pahole]$ wc -l /tmp/dwarf.symbols
93 /tmp/dwarf.symbols
[acme@doppio pahole]$ head -3 /tmp/dwarf.symbols
dwfl_addrdwarf
dwfl_module_getdwarf
dwfl_getdwarf
[acme@doppio pahole]$ perf report --sort comm,dso,symbol --comms pahole --dsos /usr/lib64/libdw-0.141.so --symbols file:///tmp/dwarf.symbols

    33.99%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_tag
    29.07%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_decl_file
    27.71%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_getsrclines
     4.54%            pahole  /usr/lib64/libdw-0.141.so  0x00000000007400
     3.93%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_decl_line
     0.46%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_getlocation
     0.18%            pahole  /usr/lib64/libdw-0.141.so  [.] __libdwarf_next_prime
     0.13%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_diecu

[acme@doppio pahole]$
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246399282-20934-4-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

So that we can filter by comm. Symbols in other comms won't be
accounted for.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246399282-20934-3-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

So that we can filter by dso. Symbols in other dsos won't be
accounted for.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246399282-20934-2-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use the newly created callchains radix tree to gather the chains stats
from the recorded events and then print the callchains for all of them,
sorted by hits, using the "-c" parameter with perf report.

Example:

 66.15%  [k] atm_clip_exit
            63.08%
                0xffffffffffffff80
                0xffffffff810196a8
                0xffffffff810c14c8
                0xffffffff8101a79c
                0xffffffff810194f3
                0xffffffff8106ab7f
                0xffffffff8106abe5
                0xffffffff8106acde
                0xffffffff8100d94b
                0xffffffff8153e7ea
                [...]

             1.54%
                0xffffffffffffff80
                0xffffffff810196a8
                0xffffffff810c14c8
                0xffffffff8101a79c
		[...]

Symbols are not yet resolved.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246026481-8314-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We plan to display the callchains depending on some user-configurable
parameters.

To gather the callchains stats from the recorded stream in a fast way,
this patch introduces an ad hoc radix tree adapted for callchains and also
a rbtree to sort these callchains once we have gathered every events
from the stream.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246026481-8314-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>