Kernel workqueue's tracepoints print the address of work_struct, while btrfs
workqueue's tracepoints print the address of btrfs_work.

We need a connection between this two, for example when debuging, we usually
grep an address in the trace output.  So it'd be better to also print
work_struct in btrfs workqueue's tracepoint.

Please note that we can only add this into those tracepoints whose work is still
available in memory because we need to reference the work.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

We want this to debug qgroup changes on live systems.
Signed-off-by: NMark Fasheh <mfasheh@suse.de>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

The member variants - latest_devid and latest_trans - of fs_devices structure
are set, but no one use them to do anything. so remove them.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

The io error might happen during writing out the device stats, and the
device stats information and dirty flag would be update at that time,
but the current code didn't consider this case, just clear the dirty
flag, it would cause that we forgot to write out the new device stats
information. Fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

The lock in btrfs_device structure was far away from its protected data, it would
make CPU load the cache line twice when we accessed them, move them together.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

The super block generation of the seed devices is not the same as the
filesystem which sprouted from them because we don't update the super
block on the seed devices when we change that new filesystem. So we
should not use the generation of that new filesystem to check the super
block generation on the seed devices, Fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

All the metadata in the seed devices has the same fsid as the fsid
of the seed filesystem which is on the seed device, so we should check
them by the current filesystem. Fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

The transaction thread may want to do more work, namely it pokes the
cleaner ktread that will start processing uncleaned subvols.

This can be triggered by user via the 'btrfs fi sync' command, otherwise
there was a delay up to 30 seconds before the cleaner started to clean
old snapshots.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

inline data is stored from offset of @disk_bytenr in
struct btrfs_file_extent_item. So substracting total
size of struct btrfs_file_extent_item is wrong, fix it.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

Btrfs could still inline file data if its size is same as
page size, so don't skip max value here.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

If flag NOCOMPRESS is set which means bad compression ratio,
we could avoid call cow_file_range_async() for this case earlier.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

If a file's compression ratios is bad, we will set NOCOMPRESS
flag for it, and it will skip compression for that inode next time.

However, if we remount fs to COMPRESS_FORCE, it still should try
if we could compress pages for that inode, this patch fix wrong
check for this problem.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

Fix the following sparse warning:
fs/btrfs/send.c:518:51: warning: incorrect type in argument 2 (different address spaces)
fs/btrfs/send.c:518:51:    expected char const [noderef] <asn:1>*<noident>
fs/btrfs/send.c:518:51:    got char *

We can safely use (const char __user *) with set_fs(KERNEL_DS)

__force added to avoid sparse-all warning:
fs/btrfs/send.c:518:40: warning: cast adds address space to expression (<asn:1>)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Reviewed-by: NZach Brown <zab@zabbo.net>
Signed-off-by: NChris Mason <clm@fb.com>

Use BUG_ON(x) rather than if(x) BUG();

The semantic patch that fixes this problem is as follows:

// <smpl>
@@ identifier x; @@
-if (x) BUG();
+BUG_ON(x);
// </smpl>
Signed-off-by: NHimangi Saraogi <himangi774@gmail.com>
Acked-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NChris Mason <clm@fb.com>

`struct workspace' used for zlib compression contains two zlib
z_stream-s: `def_strm' used in zlib_compress_pages(), and `inf_strm'
used in zlib_decompress/zlib_decompress_biovec(). None of these
functions use `inf_strm' and `def_strm' simultaniously, meaning that
for every compress/decompress operation we need only one z_stream
(out of two available).

`inf_strm' and `def_strm' are different in size of ->workspace. For
inflate stream we vmalloc() zlib_inflate_workspacesize() bytes, for
deflate stream - zlib_deflate_workspacesize() bytes. On my system zlib
returns the following workspace sizes, correspondingly: 42312 and 268104
(+ guard pages).

Keep only one `z_stream' in `struct workspace' and use it for both
compression and decompression. Hence, instead of vmalloc() of two
z_stream->worskpace-s, allocate only one of size:
	max(zlib_deflate_workspacesize(), zlib_inflate_workspacesize())
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NChris Mason <clm@fb.com>

We were returning with 0 (success) because we weren't extracting the
error code from em (PTR_ERR(em)). Fix it.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

The tree field of struct extent_state was only used to figure out if
an extent state was connected to an inode's io tree or not. For this
we can just use the rb_node field itself.

On a x86_64 system with this change the sizeof(struct extent_state) is
reduced from 96 bytes down to 88 bytes, meaning that with a page size
of 4096 bytes we can now store 46 extent states per page instead of 42.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

replace IS_ERR/PTR_ERR

Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: linux-btrfs@vger.kernel.org
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NChris Mason <clm@fb.com>

Marc argued that if there are several btrfs filesystems mounted,
while users even don't know which filesystem hit the corrupted
errors something like generation verification failure.

Since @extent_buffer structure has a member @fs_info, let's output
btrfs device info.
Reported-by: NMarc MERLIN <marc@merlins.org>
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

If we mounted a seed filesystem with degraded option, and then added a new
device into the seed filesystem, then we found adding device failed because
of the IO failure.

Steps to reproduce:
 # mkfs.btrfs -d raid1 -m raid1 <dev0> <dev1>
 # btrfstune -S 1 <dev0>
 # mount <dev0> -o degraded <mnt>
 # btrfs device add -f <dev2> <mnt>

It is because the original didn't set the chunk on the seed device to be
read-only if the degraded flag was set. It was introduced by patch f48b9075,
which fixed the problem the raid1 filesystem became read-only after one device
of it was missing. But this fix method was not right, we should set the read-only
flag according to the number of the missing devices, not the degraded mount
option, if the number of the missing devices is less than the max error number
that the profile of the chunk tolerates, we don't set it to be read-only.

Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

Btrfs defragment will utilize COW feature, which means this
did not work for nodatacow option, this problem was detected
by xfstests generic/018 with nodatacow mount option.

Fix this problem by forcing cow for a extent with state
@EXTETN_DEFRAG setting.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Rediffed remaining parts of original patch from Anand Jain.  This makes
sure to avoid trailing newlines in the btrfs label output

reproducer.sh:

===============================================================================

TEST_DEV=/dev/vdb
TEST_DIR=/home/sat/mnt

umount /home/sat/mnt

mkfs.btrfs -f $TEST_DEV
UUID=$(btrfs fi show $TEST_DEV | head -1 | sed -e 's/.*uuid: \([-0-9a-z]*\)$/\1/')
mount $TEST_DEV $TEST_DIR
LABELFILE=/sys/fs/btrfs/$UUID/label

echo "Test for empty label..." >&2
LINES="$(cat $LABELFILE | wc -l | awk '{print $1}')"
RET=0

if [ $LINES -eq 0 ] ; then
    echo '[PASS] Trailing \n is removed correctly.' >&2
else
    echo '[FAIL] Trailing \n still exists.' >&2
    RET=1
fi

echo "Test for non-empty label..." >&2

echo testlabel >$LABELFILE
LINES="$(cat $LABELFILE | wc -l | awk '{print $1}')"

if [ $LINES -eq 1 ] ; then
    echo '[PASS] Trailing \n is removed correctly.' >&2
else
    echo '[FAIL] Trailing \n still exists.' >&2
    RET=1
fi

exit $RET
===============================================================================
Signed-off-by: NSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

as in the disk add patch, disk detached from the volume must be
recorded in the syslog as well for the same reason.
Signed-off-by: NAnand Jain <Anand.Jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

when we add a new disk to the mounted btrfs we don't record it
as of now, disk add is a critical change of btrfs configuration,
it must be recorded in the syslog to help offline investigations
of customer problems when reported.
Signed-off-by: NAnand Jain <Anand.Jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

Steps to reproduce:
 # mkfs.btrfs -f /dev/sdb
 # mount /dev/sdb /mnt -o compress-force=lzo
 # mount /dev/sdb /mnt -o remount,compress=zlib
 # cat /proc/mounts

Remounting from compress-force to compress could not clear compress-force
option. The problem is there is no way for users to clear compress-force
option separately.

Fix this problem by clearing @FORCE_COMPRESS flag when remounting to
compress=xxx.
Suggested-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Reviewed-by: NSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Tested-by: NSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

The form

  (value + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT

is equivalent to

  (value + PAGE_CACHE_SIZE - 1) / PAGE_CACHE_SIZE

The rest is a simple subsitution, no difference in the generated
assembly code.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

Only wraps the ALIGN macro.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

The nodesize and leafsize were never of different values. Unify the
usage and make nodesize the one. Cleanup the redundant checks and
helpers.

Shaves a few bytes from .text:

  text    data     bss     dec     hex filename
852418   24560   23112  900090   dbbfa btrfs.ko.before
851074   24584   23112  898770   db6d2 btrfs.ko.after
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

btrfs_set_key_type and btrfs_key_type are used inconsistently along with
open coded variants. Other members of btrfs_key are accessed directly
without any helpers anyway.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

There's no user of the return value and we can get rid of the comment in
put_super.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

The naming is confusing, generic yet used for a specific cache. Add a
prefix 'ino_' or rename appropriately.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

The comment applied when there was a BUG_ON.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

Pull vfs fixes from Al Viro:
 "double iput() on failure exit in lustre, racy removal of spliced
  dentries from ->s_anon in __d_materialise_dentry() plus a bunch of
  assorted RCU pathwalk fixes"

The RCU pathwalk fixes end up fixing a couple of cases where we
incorrectly dropped out of RCU walking, due to incorrect initialization
and testing of the sequence locks in some corner cases.  Since dropping
out of RCU walk mode forces the slow locked accesses, those corner cases
slowed down quite dramatically.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  be careful with nd->inode in path_init() and follow_dotdot_rcu()
  don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu()
  fix bogus read_seqretry() checks introduced in b37199e6
  move the call of __d_drop(anon) into __d_materialise_unique(dentry, anon)
  [fix] lustre: d_make_root() does iput() on dentry allocation failure

The performance regression that Josef Bacik reported in the pathname
lookup (see commit 99d263d4 "vfs: fix bad hashing of dentries") made
me look at performance stability of the dcache code, just to verify that
the problem was actually fixed.  That turned up a few other problems in
this area.

There are a few cases where we exit RCU lookup mode and go to the slow
serializing case when we shouldn't, Al has fixed those and they'll come
in with the next VFS pull.

But my performance verification also shows that link_path_walk() turns
out to have a very unfortunate 32-bit store of the length and hash of
the name we look up, followed by a 64-bit read of the combined hash_len
field.  That screws up the processor store to load forwarding, causing
an unnecessary hickup in this critical routine.

It's caused by the ugly calling convention for the "hash_name()"
function, and easily fixed by just making hash_name() fill in the whole
'struct qstr' rather than passing it a pointer to just the hash value.

With that, the profile for this function looks much smoother.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull parisc updates from Helge Deller:
 "The most important patch is a new Light Weigth Syscall (LWS) for 8,
  16, 32 and 64 bit atomic CAS operations which is required in order to
  be able to implement the atomic gcc builtins on our platform.

  Other than that, we wire up the seccomp, getrandom and memfd_create
  syscalls, fixes a minor off-by-one bug and a wrong printk string"

* 'parisc-3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Implement new LWS CAS supporting 64 bit operations.
  parisc: Wire up seccomp, getrandom and memfd_create syscalls
  parisc: dino: fix %d confusingly prefixed with 0x in format string
  parisc: sys_hpux: NUL terminator is one past the end

in the former we simply check if dentry is still valid after picking
its ->d_inode; in the latter we fetch ->d_inode in the same places
where we fetch dentry and its ->d_seq, under the same checks.

Cc: stable@vger.kernel.org # 2.6.38+
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

return the value instead, and have path_init() do the assignment.  Broken by
"vfs: Fix absolute RCU path walk failures due to uninitialized seq number",
which was Cc-stable with 2.6.38+ as destination.  This one should go where
it went.

To avoid dummy value returned in case when root is already set (it would do
no harm, actually, since the only caller that doesn't ignore the return value
is guaranteed to have nd->root *not* set, but it's more obvious that way),
lift the check into callers.  And do the same to set_root(), to keep them
in sync.

Cc: stable@vger.kernel.org # 2.6.38+
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>