- 26 5月, 2016 22 次提交
-
-
由 Ilya Dryomov 提交于
ceph_osdc_stop() isn't called if ceph_osdc_init() fails, so we end up with handle_osds_timeout() running on invalid memory if any one of the allocations fails. Call schedule_delayed_work() after everything is setup, just before returning. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
If you specify ACK | ONDISK and set ->r_unsafe_callback, both ->r_callback and ->r_unsafe_callback(true) are called on ack. This is very confusing. Redo this so that only one of them is called: ->r_unsafe_callback(true), on ack ->r_unsafe_callback(false), on commit or ->r_callback, on ack|commit Decode everything in decode_MOSDOpReply() to reduce clutter. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
finish_read(), its only user, uses it to get to hdr.data_len, which is what ->r_result is set to on success. This gains us the ability to safely call callbacks from contexts other than reply, e.g. map check. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
The crux of this is getting rid of ceph_osdc_build_request(), so that MOSDOp can be encoded not before but after calc_target() calculates the actual target. Encoding now happens within ceph_osdc_start_request(). Also nuked is the accompanying bunch of pointers into the encoded buffer that was used to update fields on each send - instead, the entire front is re-encoded. If we want to support target->name_len != base->name_len in the future, there is no other way, because oid is surrounded by other fields in the encoded buffer. Encoding OSD ops and adding data items to the request message were mixed together in osd_req_encode_op(). While we want to re-encode OSD ops, we don't want to add duplicate data items to the message when resending, so all call to ceph_osdc_msg_data_add() are factored out into a new setup_request_data(). Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Replace __calc_request_pg() and most of __map_request() with calc_target() and start using req->r_t. ceph_osdc_build_request() however still encodes base_oid, because it's called before calc_target() is and target_oid is empty at that point in time; a printf in osdc_show() also shows base_oid. This is fixed in "libceph: switch to calc_target(), part 2". Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Introduce ceph_osd_request_target, containing all mapping-related fields of ceph_osd_request and calc_target() for calculating mappings and populating it. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Add and decode pi->min_size and pi->last_force_request_resend. These are going to be used by calc_target(). Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
calc_target() code is going to need to know how to compare PGs. Take lhs and rhs pgid by const * while at it. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Rename ceph_calc_pg_primary() to ceph_pg_to_acting_primary() to emphasise that it returns acting primary. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Knowning just acting set isn't enough, we need to be able to record up set as well to detect interval changes. This means returning (up[], up_len, up_primary, acting[], acting_len, acting_primary) and passing it around. Introduce and switch to ceph_osds to help with that. Rename ceph_calc_pg_acting() to ceph_pg_to_up_acting_osds() and return both up and acting sets from it. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Rename ceph_oloc_oid_to_pg() to ceph_object_locator_to_pg(). Emphasise that returned is raw PG and return -ENOENT instead of -EIO if the pool doesn't exist. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
eversion_t is version+epoch in userspace and is encoded in that order. ceph_eversion is defined as epoch+version in rados.h, yet we memcpy it in __send_request(). Reoder ceph_eversion fields. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Given struct foo { u64 id; struct rb_node bar_node; }; generate insert_bar(), erase_bar() and lookup_bar() functions with DEFINE_RB_FUNCS(bar, struct foo, id, bar_node) The key is assumed to be an integer (u64, int, etc), compared with < and >. nodefld has to be initialized with RB_CLEAR_NODE(). Start using it for MDS, MON and OSD requests and OSD sessions. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
They are called only once, from ceph_osdc_stop() and handle_osds_timeout() respectively. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Either unused or useless: osdmap->mkfs_epoch osd->o_marked_for_keepalive monc->num_generic_requests osdc->map_waiters osdc->last_requested_map osdc->timeout_tid osd_req_op_cls_response_data() osdmap_apply_incremental() @msgr arg Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Switch to ceph_object_id and use ceph_oid_aprintf() instead of a bare const char *. This reduces noise in rbd_dev_header_name(). Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Currently ceph_object_id can hold object names of up to 100 (CEPH_MAX_OID_NAME_LEN) characters. This is enough for all use cases, expect one - long rbd image names: - a format 1 header is named "<imgname>.rbd" - an object that points to a format 2 header is named "rbd_id.<imgname>" We operate on these potentially long-named objects during rbd map, and, for format 1 images, during header refresh. (A format 2 header name is a small system-generated string.) Lift this 100 character limit by making ceph_object_id be able to point to an externally-allocated string. Apart from being able to work with almost arbitrarily-long named objects, this allows us to reduce the size of ceph_object_id from >100 bytes to 64 bytes. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
For a message pool message, preallocate a page, just like we do for osd_op. For a normal message, take ceph_object_id into account and don't bother subtracting CEPH_OSD_SLAB_OPS ceph_osd_ops. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
The size of ->r_request and ->r_reply messages depends on the size of the object name (ceph_object_id), while the size of ceph_osd_request is fixed. Move message allocation into a separate function that would have to be called after ceph_object_id and ceph_object_locator (which is also going to become variable in size with RADOS namespaces) have been filled in: req = ceph_osdc_alloc_request(...); <fill in req->r_base_oid> <fill in req->r_base_oloc> ceph_osdc_alloc_messages(req); Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
ceph_osdc_build_request() is going away. Grab snapc and initialize ->r_snapid in ceph_osdc_alloc_request(). Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
By the time we get to checking for_each_obj_request_safe(img_request) terminating condition, all obj_requests may be complete and img_request ref, that rbd_img_request_submit() takes away from its caller, may be put. Moving the next_obj_request cursor is then a use-after-free on img_request. It's totally benign, as the value that's read is never used, but I think it's still worth fixing. Cc: Alex Elder <elder@linaro.org> Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
- 16 5月, 2016 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 15 5月, 2016 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fix from Thomas Gleixner: "Just the missing compat entry for the new pread/writev2" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Use compat version for preadv2 and pwritev2
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix mvneta/bm dependencies, from Arnd Bergmann. 2) RX completion hw bug workaround in bnxt_en, from Michael Chan. 3) Kernel pointer leak in nf_conntrack, from Linus. 4) Hoplimit route attribute limits not enforced properly, from Paolo Abeni. 5) qlcnic driver NULL deref fix from Dan Carpenter. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: arm64: bpf: jit JMP_JSET_{X,K} net/route: enforce hoplimit max value nf_conntrack: avoid kernel pointer value leak in slab name drivers: net: xgene: fix register offset drivers: net: xgene: fix statistics counters race condition drivers: net: xgene: fix ununiform latency across queues drivers: net: xgene: fix sharing of irqs drivers: net: xgene: fix IPv4 forward crash xen-netback: fix extra_info handling in xenvif_tx_err() net: mvneta: bm: fix dependencies again bnxt_en: Add workaround to detect bad opaque in rx completion (part 2) bnxt_en: Add workaround to detect bad opaque in rx completion (part 1) qlcnic: potential NULL dereference in qlcnic_83xx_get_minidump_template()
-
由 Zi Shen Lim 提交于
Original implementation commit e54bcde3 ("arm64: eBPF JIT compiler") had the relevant code paths, but due to an oversight always fail jiting. As a result, we had been falling back to BPF interpreter whenever a BPF program has JMP_JSET_{X,K} instructions. With this fix, we confirm that the corresponding tests in lib/test_bpf continue to pass, and also jited. ... [ 2.784553] test_bpf: #30 JSET jited:1 188 192 197 PASS [ 2.791373] test_bpf: #31 tcpdump port 22 jited:1 325 677 625 PASS [ 2.808800] test_bpf: #32 tcpdump complex jited:1 323 731 991 PASS ... [ 3.190759] test_bpf: #237 JMP_JSET_K: if (0x3 & 0x2) return 1 jited:1 110 PASS [ 3.192524] test_bpf: #238 JMP_JSET_K: if (0x3 & 0xffffffff) return 1 jited:1 98 PASS [ 3.211014] test_bpf: #249 JMP_JSET_X: if (0x3 & 0x2) return 1 jited:1 120 PASS [ 3.212973] test_bpf: #250 JMP_JSET_X: if (0x3 & 0xffffffff) return 1 jited:1 89 PASS ... Fixes: e54bcde3 ("arm64: eBPF JIT compiler") Signed-off-by: NZi Shen Lim <zlim.lnx@gmail.com> Acked-by: NWill Deacon <will.deacon@arm.com> Acked-by: NYang Shi <yang.shi@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Abeni 提交于
Currently, when creating or updating a route, no check is performed in both ipv4 and ipv6 code to the hoplimit value. The caller can i.e. set hoplimit to 256, and when such route will be used, packets will be sent with hoplimit/ttl equal to 0. This commit adds checks for the RTAX_HOPLIMIT value, in both ipv4 ipv6 route code, substituting any value greater than 255 with 255. This is consistent with what is currently done for ADVMSS and MTU in the ipv4 code. Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
The slab name ends up being visible in the directory structure under /sys, and even if you don't have access rights to the file you can see the filenames. Just use a 64-bit counter instead of the pointer to the 'net' structure to generate a unique name. This code will go away in 4.7 when the conntrack code moves to a single kmemcache, but this is the backportable simple solution to avoiding leaking kernel pointers to user space. Fixes: 5b3501fa ("netfilter: nf_conntrack: per netns nf_conntrack_cachep") Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Al Viro: "Overlayfs fixes from Miklos, assorted fixes from me. Stable fodder of varying severity, all sat in -next for a while" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ovl: ignore permissions on underlying lookup vfs: add lookup_hash() helper vfs: rename: check backing inode being equal vfs: add vfs_select_inode() helper get_rock_ridge_filename(): handle malformed NM entries ecryptfs: fix handling of directory opening atomic_open(): fix the handling of create_error fix the copy vs. map logics in blk_rq_map_user_iov() do_splice_to(): cap the size before passing to ->splice_read()
-
- 14 5月, 2016 11 次提交
-
-
由 David S. Miller 提交于
Iyappan Subramanian says: ==================== drivers: net: xgene: Bug fixes This patch set addresses the following bug fixes that were found during testing. 1. IPv4 forward test crash - drivers: net: xgene: fix IPv4 forward crash 2. Sharing of irqs - drivers: net: xgene: fix sharing of irqs 3. Ununiform latency across queues - drivers: net: xgene: fix ununiform latency across queues 4. Fix statistics counters race condition - drivers: net: xgene: fix statistics counters race condition 5. Correcting register offset and field lengths - drivers: net: xgene: fix register offset v2: Address review comments from v1 - Defer TSO fix, and reposting all other patches from v1 v1: - Initial version ==================== Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Iyappan Subramanian 提交于
This patch fixes SG_RX_DV_GATE_REG_0_ADDR register offset and ring state field lengths. Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Tested-by: NToan Le <toanle@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Iyappan Subramanian 提交于
This patch fixes the race condition on updating the statistics counters by moving the counters to the ring structure. Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Tested-by: NToan Le <toanle@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Iyappan Subramanian 提交于
This patch addresses ununiform latency across queues by adding more queues to match with, upto number of CPU cores. Also, number of interrupts are increased and the channel numbers are reordered. Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Tested-by: NToan Le <toanle@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Iyappan Subramanian 提交于
Since hardware doesn't allow sharing of interrupts, this patch fixes the same by removing IRQF_SHARED flag. Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Tested-by: NToan Le <toanle@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Iyappan Subramanian 提交于
This patch fixes the crash observed during IPv4 forward test by setting the drop field in the dbptr. Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Tested-by: NToan Le <toanle@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fixes from Tejun Heo: "During v4.6-rc1 cgroup namespace support was merged. There is an issue where it's impossible to tell whether a given cgroup mount point is bind mounted or namespaced. Serge has been working on the issue but it took longer than expected to resolve, so the late pull request. Given that it's a completely new feature and the patches don't touch anything else, the risk seems acceptable. However, if this is too late, an alternative is plugging new cgroup ns creation for v4.6 and retrying for v4.7" * 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix compile warning kernfs: kernfs_sop_show_path: don't return 0 after seq_dentry call cgroup, kernfs: make mountinfo show properly scoped path for cgroup namespaces kernfs_path_from_node_locked: don't overwrite nlen
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull workqueue fix from Tejun Heo: "CPU hotplug callbacks can invoke DOWN_FAILED w/o preceding DOWN_PREPARE which can trigger a WARN_ON() in workqueue. The bug has been there for a very long time. It only triggers if CPU down fails at a specific point and I don't think it has adverse effects other than the warning messages. The fix is very low impact" * 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: fix rebind bound workers warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fix from Ingo Molnar: "This is a revert to fix an interactivity problem. The proper fixes for the problems that the reverted commit exposed are now in sched/core (consisting of 3 patches), but were too risky for v4.6 and will arrive in the v4.7 merge window" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "sched/fair: Fix fairness issue on migration"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "An uncharacteristically large number of bugs popped up in the last week: - various tooling fixes, two crashes and build problems - two Intel PT fixes - an KNL uncore driver fix - an Intel PMU driver fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf stat: Fallback to user only counters when perf_event_paranoid > 1 perf evsel: Handle EACCESS + perf_event_paranoid=2 in fallback() perf evsel: Improve EPERM error handling in open_strerror() tools lib traceevent: Do not reassign parg after collapse_tree() perf probe: Check if dwarf_getlocations() is available perf dwarf: Guard !x86_64 definitions under #ifdef else clause perf tools: Use readdir() instead of deprecated readdir_r() perf thread_map: Use readdir() instead of deprecated readdir_r() perf script: Use readdir() instead of deprecated readdir_r() perf tools: Use readdir() instead of deprecated readdir_r() perf/core: Disable the event on a truncated AUX record perf/x86/intel/pt: Generate PMI in the STOP region as well perf/x86: Fix undefined shift on 32-bit kernels perf/x86/msr: Fix SMI overflow perf/x86/intel/uncore: Fix CHA registers configuration procedure for Knights Landing platform perf diff: Fix duplicated output column
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Arnd Bergmann: "Three more bug fixes for ARM SoCs this week: - The Atmel sama5d2 was registering the wrong NFC device type - On Atmel sam9x5, the power management controller had an incorrect register area size - On ARM64 Allwinner machine was not secting the generic irqchip code, causing build errors in some configurations" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: at91: sam9x5: Fix the memory range assigned to the PMC arm64/sunxi: 4.6-rc1: Add dependency on generic irq chip ARM: dts: at91: sama5d2: use "atmel,sama5d3-nfc" compatible for nfc
-