- 16 10月, 2008 1 次提交
-
-
由 Jiri Kosina 提交于
Commit 9be7bbd5 (HID: build drivers for all quirky devices by default) made a wrong assumption about select/depends interaction in Kconfig, resulting in possibility of link failure with certain configuration options. Fix this by explicitly having all the quirk-drivers depend on USB_HID, default to y and make the possibility to alter the settings dependent on EBMEDDED. Reported-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 15 10月, 2008 39 次提交
-
-
git://jdelvare.pck.nerim.net/jdelvare-2.6由 Linus Torvalds 提交于
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c-viapro: Add support for SMBus Process Call transactions i2c: Restore i2c_smbus_process_call function i2c: Do earlier driver model init i2c: Only build Tyan SMBus mux drivers on x86 i2c: Guard against oopses from bad init sequences i2c: Document the implementation details of the /dev interface i2c: Improve dev-interface documentation i2c-parport-light: Don't register a platform device resource hwmon: (dme1737) Convert to a new-style i2c driver hwmon: (dme1737) Be less i2c-centric i2c/tps65010: Vibrator hookup to gpiolib i2c-viapro: Add VX800/VX820 support i2c: Renesas Highlander FPGA SMBus support i2c-pca-isa: Don't grab arbitrary resources i2c/isp1301_omap: Convert to a new-style i2c driver, part 2 i2c/isp1301_omap: Convert to a new-style i2c driver, part 1
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (55 commits) HID: build drivers for all quirky devices by default HID: add missing blacklist entry for Apple ATV ircontrol HID: add support for Bright ABNT2 brazilian device HID: Don't let Avermedia Radio FM800 be handled by usb hid drivers HID: fix numlock led on Dell device 0x413c/0x2105 HID: remove warn() macro from usb hid drivers HID: remove info() macro from usb HID drivers HID: add appletv IR receiver quirk HID: fix a lockup regression when using force feedback on a PID device HID: hiddev.h: Fix example code. HID: hiddev.h: Fix mixed space and tabs in example code. HID: convert to dev_* prints HID: remove hid-ff HID: move zeroplus FF processing HID: move thrustmaster FF processing HID: move pantherlord FF processing HID: fix incorrent length condition in hidraw_write() HID: fix tty<->hid deadlock HID: ignore iBuddy devices HID: report descriptor fix for remaining MacBook JIS keyboards ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (56 commits) ocfs2: Make cached block reads the common case. ocfs2: Kill the last naked wait_on_buffer() for cached reads. ocfs2: Move ocfs2_bread() into dir.c ocfs2: Simplify ocfs2_read_block() ocfs2: Require an inode for ocfs2_read_block(s)(). ocfs2: Separate out sync reads from ocfs2_read_blocks() ocfs2: Refactor xattr list and remove ocfs2_xattr_handler(). ocfs2: Calculate EA hash only by its suffix. ocfs2: Move trusted and user attribute support into xattr.c ocfs2: Uninline ocfs2_xattr_name_hash() ocfs2: Don't check for NULL before brelse() ocfs2: use smaller counters in ocfs2_remove_xattr_clusters_from_cache ocfs2: Documentation update for user_xattr / nouser_xattr mount options ocfs2: make la_debug_mutex static ocfs2: Remove pointless !! ocfs2: Add empty bucket support in xattr. ocfs2/xattr.c: Fix a bug when inserting xattr. ocfs2: Add xattr mount option in ocfs2_show_options() ocfs2: Switch over to JBD2. ocfs2: Add the 'inode64' mount option. ...
-
由 Bjorn Helgaas 提交于
We shouldn't rely on "pnp_platform_devices" to tell us whether there is a PNP RTC device. I introduced "pnp_platform_devices", but I think it was a mistake. All it tells us is whether we found any PNPBIOS or PNPACPI devices. Many machines have some PNP devices, but do not describe the RTC via PNP. On those machines, we need to do the platform driver probe to find the RTC. We should just register the PNP driver and see whether it claims anything. If we don't find a PNP RTC, fall back to the platform driver probe. This (in conjunction with the arch/x86/kernel/rtc.c patch to add a platform RTC device when PNP doesn't have one) should resolve these issues: http://bugzilla.kernel.org/show_bug.cgi?id=11580 https://bugzilla.redhat.com/show_bug.cgi?id=451188Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Reported-by: NRik Theys <rik.theys@esat.kuleuven.be> Reported-by: shr_msn@yahoo.com.tw Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bjorn Helgaas 提交于
Most if not all x86 platforms have an RTC device, but sometimes the RTC is not exposed as a PNP0b00/PNP0b01/PNP0b02 device in PNPBIOS or ACPI: http://bugzilla.kernel.org/show_bug.cgi?id=11580 https://bugzilla.redhat.com/show_bug.cgi?id=451188 It's best if we can discover the RTC via PNP because then we know which flavor of device it is, where it lives, and which IRQ it uses. But if we can't, we should register a platform device using the compiled-in RTC_PORT/RTC_IRQ resource assumptions. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Reported-by: NRik Theys <rik.theys@esat.kuleuven.be> Reported-by: shr_msn@yahoo.com.tw Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bjorn Helgaas 提交于
Move rtc_wake_setup() from drivers/acpi/glue.c into the RTC driver in drivers/rtc/rtc-cmos.c. This removes the ordering constraint between the module_init(acpi_rtc_init) and the cmos_do_probe() code that depends on it. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Kosina 提交于
Once kernel configuration has CONFIG_HID turned on, let also all the specialized drivers for quirky devices to be built (unless CONFIG_EMBEDDED is specified), as usually users don't care that much which driver gives them the functionality, but when they want generic support, they probably want to have support for all the quirky devices as well. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
This device is already handled by hid-apple driver, but the blacklist entry was missing in generic driver. Reported-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Mauro Carvalho Chehab 提交于
This keyboard needs to reset the LEDS during probe. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Mauro Carvalho Chehab 提交于
Based on an original patch from Alexey Klimov <klimov.linux@gmail.com>, against kernel version 2.6.27. This device is already handled by radio-mr800 driver, and we therefore want usbhid not to touch it. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Mauro Carvalho Chehab 提交于
This keyboard needs to re-sync numlock after probing. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 From: Greg Kroah-Hartman 提交于
USB should not be having it's own printk macros, so remove warn() and use the system-wide standard of dev_warn() wherever possible. In the few places that will not work out, use a basic printk(). Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Greg Kroah-Hartman 提交于
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Peter Korsgaard 提交于
Similar to the existing IRCONTROL4 handling Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Anssi Hannula 提交于
Commit 8006479c introduced a spinlock in input_dev->event_lock, which is locked when handling input events. However, the hid-pidff driver sleeps when handling events as it waits for reports being sent to the device before changing the report contents again. This causes a system lockup when trying to use force feedback with a PID device, a regression introduced in 2.6.24 and 2.6.23.15. Fix it by extracting the raw report data from struct hid_report immediately when hid_submit_report() is called, therefore allowing drivers to change the contents of struct hid_report immediately without affecting the already-queued transfer. In hid-pidff, re-add the removed usbhid_wait_io() to pidff_erase_effect() instead, to prevent a full report queue from causing the submission to fail, thus not freeing up device memory. pidff_erase_effect() is not called while dev->event_lock is held. Signed-off-by: NAnssi Hannula <anssi.hannula@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Antonio Ospite 提交于
Fix hiddev.h example code. To get the correct usage code, you need to set report_type and report_id. Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Antonio Ospite 提交于
Fix mixed space and tabs in example code. Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Since we have a real device bound to a driver, we may use struct device for printing. Use dev_* functions instead of printks in 4 drivers. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
hid-ff.c now calls only pidff (generic driver), the special ones are now in separate drivers. Invoke pidff on all non-special directly. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Move the force feedback processing into a separate module. [jkosina@suse.cz: fix Kconfig texts a little bit] Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
The bound check on the buffer length if (count > HID_MIN_BUFFER_SIZE) is of course incorrent, the proper check is if (count > HID_MAX_BUFFER_SIZE) Fix it. Reported-by: NJerry Ryle <jerry@mindtribe.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
hid_compat_load() runs on the default workqueue, it request_module(), it execs modprobe, it exits, tty flushes default workqueue, it hangs, because we are still in it. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Tested-by: <Valdis.Kletnieks@vt.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Remi Cattiau 提交于
iBuddy devices claim to be HID devices, but they are not. Add them to the blacklist. Signed-off-by: NRemi Cattiau <remi@cattiau.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Tomoya Adachi 提交于
This patch fixes a problem that MacBook JIS keyboard sends wrong report descriptors. Although it has already been fixed in the first Core 2 Duo model, it still remains in other models of MacBook. Signed-off-by: NTomoya Adachi <adachi@il.is.s.u-tokyo.ac.jp> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Randy Dunlap 提交于
Fix config symbol name in ifdef to fix build error: ERROR: "hid_compat_gyration" [drivers/hid/hid-dummy.ko] undefined! Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Sergey Belyashov 提交于
Current kernel has no support for autocentering for Logitech wheels. By default autocentering enabled in wheel and constant effect does not work properly. Using USB sniffer I found command which change autocentering settings: 0xFE, 0x0D, 0x0R, 0x0L, 0x80, 0x00, 0x00, where R - clockwise force, L - counter-clockwise (0x0-0xF, 0xC = 100%). Signed-off-by: NSergey Belyashov <Sergey.Belyashov@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Alex Chiang 提交于
The Kconfig option for HID_COMPAT should read "lose", not "loose". Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
This seems to be the very same device, as already supported Smartjoy dual Plus, but with slightly different vendor ID. Let's support this one too. Reported-by: NDavid Ashley <dashxdr@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Richard Hughes 提交于
This patch reverts the change made four years ago here: http://www.vg.kernel.org/pub/linux/kernel/people/gregkh/usb/2.4/usb-hid-2.4.25-pre7.patch UPS's made by MGE can be used with usbhid just fine, and by removing the ignore quirk allows them to be used with HAL so they just work when plugged in, without needing to be manually configured. With the ignore quirk in place a user would have to configure NUT before the UPS could be used, as NUT uses it's own internal USB matching framework to match against the USB devices, do low level control messages on the device and then parse the HID tables all in userspace. This is not needed, as allowing the device to be claimed as a usbhid device allows it to be used like any other USB UPS device. The devices correctly advertise the power device page which can be queried for the device state. I assume the quirk was changed so that people using < libusb 0.1.8 could still use NUT's internal HID code to manage the UPS. libusb 0.1.8 was released quite some time ago: 2004-02-11. This patch does not break NUT as in drivers/libusb.c the device is force unbound from the kernel driver using usb_detach_kernel_driver_np () where it can be controlled like normal. [jkosina@suse.cz: adapt to the new hidbus code] Signed-off-by: NRichard Hughes <rhughes@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
Introduce a list of devices for which there is need to force a creation of the hiddev interface, but still they are operated by generic driver (i.e. certain UPS). Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Merge the logitech force feedback processing directly into logitech driver from the usbhid core. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Move the handling of the leds resetting from the core to the dell and logitech drivers. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Move connecting from usbhid to the hid layer and fix also hidp in that manner. This removes all the ignore/force hidinput/hiddev connecting quirks. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Remove support for both dynamic and static report descriptor quirks. There is no longer rdesc code which it would support, so it's useless. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Remove the file since these is no user now. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-