We'll use this information to decide whether to request the JPEG IRQ later.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch adds support for the three-plane YUV422P format with one luma plane
and two horizontally subsampled chroma planes.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch adds support for the two-plane NV12 format with one luma plane
and one interleaved chroma plane.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Since the firmware newer writes to FRAME_MEM_CTRL, we can initialize it once
per context (incidentally, we already do write it in coda_hw_init) and never
have to read it back.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add a helper function that writes a vb2_buffer's Y, Cb, and
Cr plane base addresses of into three consecutive registers.
This moves common code out of coda-bit.c.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

When devm_kzalloc causes an OOM condition, this is already reported by
the MM subsystem.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Clearing the aborting flag in stop_streaming is necessary if we want to start
streaming again without having to closing and reopening the device. Also,
do not explicitly set it in default_params; the context is zeroed by
kzalloc anyway.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

For several reasons it's good practice to leave devices in runtime PM
active state while those have been probed.

In this cases we also want to prevent the device from going inactive,
until the firmware has been completely installed, especially when using
a PM domain.
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch breaks most long lines, concatenates broken up text strings,
and adds or removes parentheses where needed to make checkpatch happy.
The long codec list lines and a few 81-wide lines remain.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Since we neither support composing on the OUTPUT side, nor cropping
on the CAPTURE side, disable VIDIOC_CROPCAP and VIDIOC_G/S_CROP
altogether. This silences a GStreamer warning when GStreamer tries
to obtain the pixel aspect ratio using VIDIOC_CROPCAP.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch makes coda_s_fmt_vid_out propagate the output frame size
to the capture side.
The GStreamer v4l2videodec only ever calls S_FMT on the output side
and then expects G_FMT on the capture side to return a valid format.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Set the context color space when s_fmt succeeded, not when it failed.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Lock modification of the timestamp list with bitstream_mutex and do not
try to remove a timestamp element if the list is empty. This can happen
if the userspace feeds us garbage or multiple encoded frames in a single
buffer.
Signed-off-by: NMichael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Produce some error messages when internal buffer allocation
fails, for example because the CMA region is too small.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Dumping all register accesses drowns other debugging messages
in the log. Add a less verbose debug level.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch increases the maximum vertical frame size reported
by enum_fmt and accepted by try_fmt/s_fmt from 1080 to 1088.
Since for 16x16-pixel macroblocks 1080p will be rounded up to
this anyway, we may as well admit that we support it.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

We know that it will return NULL in this case, so we can just as well
skip it altogether.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This is needed to decrease the q->owned_by_drv_count to zero before
__vb2_queue_cancel is called, to avoid the WARN_ON therein.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Request the main coda interrupt using its name, "bit", if available.
Fall back to requesting the first interrupt for backwards compatibility.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch moves the BIT processor specific coda_context_ops, the firmware
upload and other related functions from coda-common.c into coda-bit.c.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Currently there is only the coda_h264_padding function, but
we will have to add more H.264 specific helpers later.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch moves the context buffer allocation into the context start_streaming
callbacks. The context buffer and internal framebuffer cleanup is moved into
the context release callback.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This adds a helper function to consolidate three occurences where
the bitstream parameter stream end flag is set during operation.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

In preparation for the split, move the AXI_SRAM_USE register access and the
PIC_RUN command execution out of pic_run_work into prepare_encode/decode.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add a struct coda_context_ops that encapsulates context specific operations.
This will simplify adding JPEG support in the future and helps to avoid
exporting all functions individually when they move out of the main code
file.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

These will have to be shared between multiple code files.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The coda driver has grown significantly and will continue to grow.
Move the coda driver into its own directory so it can be split.
Rename coda.h to coda_regs.h as it contains the register defines.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The format and codec lists and the ops structures are read-only.
Mark them as const.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

If the user provides an invalid format, let the decoder device
default to h.264.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Let the decoder capture side and encoder output side only list
uncompressed formats, and the decoder output and encoder capture
side only list compressed formats.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Userspace has a hard time making sense of format enumerations on V4L2
mem2mem devices if there are restrictions on which input and output
formats can be used together. Alleviate the problem by splitting the
video4linux device into separate encoder and decoder devices which list
only raw formats on one side and only encoded formats on the other side.
With this patch, the instance type (encoder or decoder) is already
determined by the open file operation.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

As soon as the output queue is streaming, let try_fmt on the capture side
only allow the frame size that was set on the output side.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

coda_fill_bitstream() calls v4l2_m2m_buf_done() which is no longer allowed
before streaming was started.
Delay coda_fill_bitstream() until coda_start_streaming() and explicitly set
'start_streaming_called' before calling coda_fill_bitstream()
Signed-off-by: NMichael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Without this changing CODA_MAX_FRAME_SIZE to anything other than 0x100000
can break the bitstram handling
Signed-off-by: NMichael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Disallow USERPTR buffers, videobuf2-dma-contig doesn't support them.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This is a mem2mem driver, pure capture or output modes are not
supported.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

If no firmware was found and the coda module is unloaded, coda_runtime_resume
will be called without an allocated code buffer. Do not call coda_hw_init in
this case.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Do not try to read the CODA960 GDI status register on CODA7541.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>