- 13 3月, 2012 15 次提交
-
-
由 Alexander Duyck 提交于
This adds support for byte queue limits (BQL). Based on patch from Eric Dumazet for igb. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com>
-
由 Jeff Kirsher 提交于
As noted by Ben Hutchings and David Miller, work limits for NAPI should not be tied to interrupt moderation parameters. This should be handled by NAPI, possibly through sysfs. Neil Horman & Stephen Hemminger are working on a solution for NAPI currently. In the meantime, remove this tie between work limits and interrupt moderation. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Ben Hutchings <bhutchings@solarflare.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
-
由 Jeff Kirsher 提交于
A bug was introduced with the following patch: Commmit bdbc0631 Author: Eric Dumazet <eric.dumazet@gmail.com> igb: Add support for byte queue limits. The ethtool offline tests will cause a perpetual link flap, this is because the tests also need to account for byte queue limits (BQL). CC: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
-
由 Dmitry Kravkov 提交于
Previously, allocation used queue statistics directly in its calcualtion. This change causes these calculations to be summed into the statistics, without being affected by them. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Previously, if autoneg failed, ethtool would return the achieved autoneg. This patch corrects this, causing ethtool to return the requested autoneg capabilities even if autoneg fails. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Previously, unless both interface and link were up, ethtool returned the requested speed/duplex when asked for the interface's settings. This change will now enable the driver to answer correctly (i.e., return unknown as its answer). Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
This change enables the FW to make more accurate decisions regarding the active functions. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Previously, we've used the object's function id instead of using the input's value. This is remedied, as in other flows. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Previously, we used a hard-coded value as paramater, instead of using the input's value. This is now remedied, as in other flows. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
These definitions are united into the header. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stigge@antcom.de 提交于
This patch adds an ethernet driver for the LPC32xx ARM SoC. Signed-off-by: NRoland Stigge <stigge@antcom.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
With this feature, a Linux guest can now configure multiple vlans through a single synthetic NIC on Win8 Hyper-V host. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
Limiting the memcpy to be the sizeof(struct rndis_message) can truncate the message if there are Per-Packet-Info or Out-of-Band data. In my earlier patch (commit 45326342), the unnecessary kmap_atomic and kunmap_atomic surrounding this memcpy have been removed because the memory in the receive buffer is always mapped. This memcpy is not necessary either. To fix the bug, I removed the memcpy. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Add #define pr_fmt(fmt) as appropriate. Add "IPv4: ", "TCP: ", and "IPsec: " to appropriate files. Standardize on "UDPLite: " for appropriate uses. Some prefixes were previously "UDPLITE: " and "UDP-Lite: ". Add KBUILD_MODNAME ": " to icmp and gre. Remove embedded prefixes as appropriate. Add missing "\n" to pr_info in gre.c. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 3月, 2012 11 次提交
-
-
由 Joe Perches 提交于
Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
The following 4 functions: move_addr_to_kernel move_addr_to_user verify_iovec verify_compat_iovec are always effectively called with a sockaddr_storage. Make this explicit by changing their signature. This removes a large number of casts from sockaddr_storage to sockaddr. Signed-off-by: NMaciej Żenczykowski <maze@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Wei 提交于
With commit d6ddef9e(IPv6: Fix not join all-router mcast group when forwarding set.) I check 'dev' after it's dereference that leads to a Smatch complaint: net/ipv6/addrconf.c:438 ipv6_add_dev() warn: variable dereferenced before check 'dev' (see line 432) net/ipv6/addrconf.c 431 /* protected by rtnl_lock */ 432 rcu_assign_pointer(dev->ip6_ptr, ndev); ^^^^^^^^^^^^ Old dereference. 433 434 /* Join all-node multicast group */ 435 ipv6_dev_mc_inc(dev, &in6addr_linklocal_allnodes); 436 437 /* Join all-router multicast group if forwarding is set */ 438 if (ndev->cnf.forwarding && dev && (dev->flags & IFF_MULTICAST)) ^^^ Remove the check to avoid the complaint as 'dev' can't be NULL. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NLi Wei <lw@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
Some months ago, tglx asked me off list if I would maintain the PTP Hardware Clock code. Since then, the code has been fully merged, and I am actively looking after it. This patch makes it official. Signed-off-by: NRichard Cochran <richardcochran@gmail.com> Acked-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
This patch has been tested on a machine with the Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05). Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
drivers/net/irda/{ali-ircc, via-ircc, w83977af-ir}.c: ensure arguments to request_irq and free_irq are compatible Convert calls to free_irq so that the second argument is the same as the last argument of the corresponding call to request_irq. Without this property, free_irq does nothing. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Convert calls to free_irq so that the second argument is the same as the last argument of the corresponding call to request_irq. Without this property, free_irq does nothing. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Connection ID configured through RTNL must allow zero as connection id. If connection-id is not given when creating the interface, configure a loopback interface using ifindex as connection-id. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Tarnyagin 提交于
Kill faulty checks on flow-off leading to connection drop at race conditions. caif_socket checks for flow-on before transmitting and goes to sleep or return -EAGAIN upon flow stop. Remove faulty subsequent checks on flow-off leading to connection drop. Also fix memory leaks on some of the errors paths. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
-
-
- 11 3月, 2012 12 次提交
-
-
由 Sven Eckelmann 提交于
Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Sven Eckelmann 提交于
Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Sven Eckelmann 提交于
Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Sven Eckelmann 提交于
Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Francois Romieu 提交于
The driver does not need this leftover of the ISA drivers era. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
- 10 3月, 2012 2 次提交
-
-
由 Stephen Rothwell 提交于
This driver is specific to the PowerPC legcay iSeries platform which is being removed. Cc: David Miller <davem@davemloft.net> Cc: <netdev@vger.kernel.org> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-