Since commit 2893c379 ("clk: make strings in parent name arrays
const") the name of parent clocks can be const. So add more const in
several clock drivers.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

Add clock drivers for hi6220 SoC, this driver controls the SoC
registers to supply different clocks to different IPs in the SoC.

We add one divider clock for hi6220 because the divider in hi6220
also has a mask bit but it doesnot obey the rule defined by flag
"CLK_DIVIDER_HIWORD_MASK", we can not get index of the mask bit by
left shift fixed bits (e.g. 16 bits), so we add this divider clock
to handle it.
Signed-off-by: NJorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: NBintian Wang <bintian.wang@huawei.com>
Acked-by: NHaojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: NWill Deacon <will.deacon@arm.com>
Tested-by: NTyler Baker <tyler.baker@linaro.org>
Tested-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

__init markings on function prototypes are useless, so remove
them.
Suggested-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NBintian Wang <bintian.wang@huawei.com>
Tested-by: NWill Deacon <will.deacon@arm.com>
Tested-by: NTyler Baker <tyler.baker@linaro.org>
Tested-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

drivers/clk/hisilicon/clk-hix5hd2.c:255:13: warning: symbol 'hix5hd2_clk_register_complex' was not declared. Should it be static?
Acked-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

The statement

	static const char *name[];

defines a modifiable array of pointers to constant chars. That is

	*name[0] = 'f';

is forbidden, but

	name[0] = "f";

is not. So marking an array that is defined as above with __initconst is
wrong. Either an additional const must be added such that the whole
definition reads:

	static const char *const name[] __initconst;

or where this is not possible __initdata must be used.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Adds a way for clock consumers to set maximum and minimum rates. This
can be used for thermal drivers to set minimum rates, or by misc.
drivers to set maximum rates to assure a minimum performance level.

Changes the signature of the determine_rate callback by adding the
parameters min_rate and max_rate.
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
[sboyd@codeaurora.org: set req_rate in __clk_init]
Signed-off-by: NMichael Turquette <mturquette@linaro.org>
[mturquette@linaro.org: min/max rate for sun6i_ahb1_clk_determine_rate
                        migrated clk-private.h changes to clk.c]

This is in preparation for clock providers to not have to deal with struct clk.
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Use __initconst instead of __initdata for constant init data.
Signed-off-by: NBintian Wang <bintian.wang@huawei.com>
Acked-by: NHaojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

hix5hd2 add I2C clocks (I2C0~i2C5)
Signed-off-by: NWei Yan <sledge.yanwei@huawei.com>
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

hix5hd2 add watchdog0 clocks
Signed-off-by: NGuoxiong Yan <yanguoxiong@huawei.com>
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Signed-off-by: NJiancheng Xue <xuejiancheng@huawei.com>
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Support clk of sata, usb and ethernet
Signed-off-by: NJiancheng Xue <xuejiancheng@huawei.com>
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Signed-off-by: NHaifeng Yan <haifeng.yan@linaro.org>
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org>

Add hisi_clk_register_gate register clk gate table
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org>

Platform hix5hd2 use mux table, so use clk_register_mux_table instead
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org>

drivers/clk/hisilicon/clk-hi3620.c:338
mmc_clk_delay() warn: always true condition '(para >= 0) => (0-u32max >= 0)'
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Remove the static variable. So these common clock register helper could
be used in more SoCs.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org>

Now only fixed rate clocks are appended into the clock driver.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org>

The fixed rate and fixed factor clock isn't registered to clk table.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org>

Suggest by Arnd: abstract mmc tuning as clock behavior,
also because different soc have different tuning method and registers.
hi3620_mmc_clks is added to handle mmc clock specifically on hi3620.
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Add missing CLK_SET_RATE_PARENT flag for gate clock.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>

The flags on dividers should be CLK_DIVIDER_HIWORD_MASK, not
CLK_MUX_HIWORD_MASK.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>

Enable common clock driver of Hi3620 SoC. clkgate-seperated driver is
used to support the clock gate that enable/disable/status registers
are seperated.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>