[ Upstream commit 8077ec011b1ea26abb7ca786f28ecccfb352717f ]

AD/DA ASRC function control two ASRC clock sources separately.
Whether AD/DA filter select which clock source, we enable AD/DA ASRC
function for all cases.
Signed-off-by: NShuming Fan <shumingf@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bb867d219fda7fbaabea3314702474c4eac2b91d ]

The CSI offsets are wrong for both CSI0 and CSI1. They are at
physical address 0x1e030000 and 0x1e038000 respectively.

Fixes: 2ffd48f2 ("gpu: ipu-v3: Add Camera Sensor Interface unit")
Signed-off-by: NSteve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit aa3312012f103f91f123600bbf768b11c8f431bc ]

The device node iterators perform an of_node_get on each
iteration, so a jump out of the loop requires an of_node_put.

Move the initialization channel->child = child; down to just
before the call to imx_ldb_register so that intervening failures
don't need to clear it.  Add a label at the end of the function to
do all the of_node_puts.

The semantic patch that finds part of this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@

 for_each_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
*  return ...;
)
   ...
 }
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2c0408dd0d8906b26fe8023889af7adf5e68b2c2 ]

The CSI0/CSI1 registers offset is at +0xe030000/+0xe038000 relative
to the control module registers on IPUv3EX.
This patch fixes wrong values for i.MX51 CSI0/CSI1.

Fixes: 2ffd48f2 ("gpu: ipu-v3: Add Camera Sensor Interface unit")
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4fb873c9648e383206e0a91cef9b03aa54066aca ]

This patch fixes backtraces like the following when sending SIGKILL to a
process with a currently pending plane update:

    [drm:ipu_plane_atomic_check] CRTC should be enabled
    [drm:drm_framebuffer_remove] *ERROR* failed to commit
    ------------[ cut here ]------------
    WARNING: CPU: 3 PID: 63 at drivers/gpu/drm/drm_framebuffer.c:926 drm_framebuffer_remove+0x47c/0x498
    atomic remove_fb failed with -22
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit c1c214adcb56d36433480c8fedf772498e7e539c upstream.

For chain mode in cipher(eg. AES-CBC/DES-CBC), the iv is continuously
updated in the operation. The new iv value should be written to device
register by software.
Reported-by: NEric Biggers <ebiggers@google.com>
Fixes: 433cd2c6 ("crypto: rockchip - add crypto driver for rk3288")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: NZhang Zhijie <zhangzj@rock-chips.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4359669a087633132203c52d67dd8c31e09e7b2e upstream.

In some cases, the nents of src scatterlist is different from
dst scatterlist. So two variables are used to handle the nents
of src&dst scatterlist.
Reported-by: NEric Biggers <ebiggers@google.com>
Fixes: 433cd2c6 ("crypto: rockchip - add crypto driver for rk3288")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: NZhang Zhijie <zhangzj@rock-chips.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 77568e535af7c4f97eaef1e555bf0af83772456c upstream.

Hash algorithms with an alignmask set, e.g. "xcbc(aes-aesni)" and
"michael_mic", fail the improved hash tests because they sometimes
produce the wrong digest.  The bug is that in the case where a
scatterlist element crosses pages, not all the data is actually hashed
because the scatterlist walk terminates too early.  This happens because
the 'nbytes' variable in crypto_hash_walk_done() is assigned the number
of bytes remaining in the page, then later interpreted as the number of
bytes remaining in the scatterlist element.  Fix it.

Fixes: 900a081f ("crypto: ahash - Fix early termination in hash walk")
Cc: stable@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6c2e322b3621dc8be72e5c86d4fdb587434ba625 upstream.

The memcpy() in crypto_cfb_decrypt_inplace() uses walk->iv as both the
source and destination, which has undefined behavior.  It is unneeded
because walk->iv is already used to hold the previous ciphertext block;
thus, walk->iv is already updated to its final value.  So, remove it.

Also, note that in-place decryption is the only case where the previous
ciphertext block is not directly available.  Therefore, as a related
cleanup I also updated crypto_cfb_encrypt_segment() to directly use the
previous ciphertext block rather than save it into walk->iv.  This makes
it consistent with in-place encryption and out-of-place decryption; now
only in-place decryption is different, because it has to be.

Fixes: a7d85e06 ("crypto: cfb - add support for Cipher FeedBack mode")
Cc: <stable@vger.kernel.org> # v4.17+
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 394a9e044702e6a8958a5e89d2a291605a587a2a upstream.

Like some other block cipher mode implementations, the CFB
implementation assumes that while walking through the scatterlist, a
partial block does not occur until the end.  But the walk is incorrectly
being done with a blocksize of 1, as 'cra_blocksize' is set to 1 (since
CFB is a stream cipher) but no 'chunksize' is set.  This bug causes
incorrect encryption/decryption for some scatterlist layouts.

Fix it by setting the 'chunksize'.  Also extend the CFB test vectors to
cover this bug as well as cases where the message length is not a
multiple of the block size.

Fixes: a7d85e06 ("crypto: cfb - add support for Cipher FeedBack mode")
Cc: <stable@vger.kernel.org> # v4.17+
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2b5ac17463dcb2411fed506edcf259a89bb538ba upstream.

For decryption in CBC mode we need to save the last ciphertext block
for use as the next IV. However, we were trying to do this also with
zero sized ciphertext resulting in a panic.

Fix this by only doing the copy if the ciphertext length is at least
of IV size.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c139c72e2beb3e3db5148910b3962b7322e24374 upstream.

We were copying the last ciphertext block into the IV field
for CBC before removing the DMA mapping of the output buffer
with the result of the buffer sometime being out-of-sync cache
wise and were getting intermittent cases of bad output IV.

Fix it by moving the DMA buffer unmapping before the copy.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Fixes: 00904aa0 ("crypto: ccree - fix iv handling")
Cc: <stable@vger.kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a49411959ea6d4915a9fd2a7eb5ba220e6284e9a upstream.

In cc_unmap_aead_request(), call dma_pool_free() for mlli buffer only
if an item is allocated from the pool and not always if there is a
pool allocated.
This fixes a kernel panic when trying to free a non-allocated item.

Cc: stable@vger.kernel.org
Signed-off-by: NHadar Gat <hadar.gat@arm.com>
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c19650d6ea99bcd903d3e55dd61860026c701339 upstream.

Roland reports the following issue and provides a root cause analysis:

"On a v4.19 i.MX6 system with IMA and CONFIG_DMA_API_DEBUG enabled, a
warning is generated when accessing files on a filesystem for which IMA
measurement is enabled:

    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:1181 check_for_stack.part.9+0xd0/0x120
    caam_jr 2101000.jr0: DMA-API: device driver maps memory from stack [addr=b668049e]
    Modules linked in:
    CPU: 0 PID: 1 Comm: switch_root Not tainted 4.19.0-20181214-1 #2
    Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
    Backtrace:
    [<c010efb8>] (dump_backtrace) from [<c010f2d0>] (show_stack+0x20/0x24)
    [<c010f2b0>] (show_stack) from [<c08b04f4>] (dump_stack+0xa0/0xcc)
    [<c08b0454>] (dump_stack) from [<c012b610>] (__warn+0xf0/0x108)
    [<c012b520>] (__warn) from [<c012b680>] (warn_slowpath_fmt+0x58/0x74)
    [<c012b62c>] (warn_slowpath_fmt) from [<c0199acc>] (check_for_stack.part.9+0xd0/0x120)
    [<c01999fc>] (check_for_stack.part.9) from [<c019a040>] (debug_dma_map_page+0x144/0x174)
    [<c0199efc>] (debug_dma_map_page) from [<c065f7f4>] (ahash_final_ctx+0x5b4/0xcf0)
    [<c065f240>] (ahash_final_ctx) from [<c065b3c4>] (ahash_final+0x1c/0x20)
    [<c065b3a8>] (ahash_final) from [<c03fe278>] (crypto_ahash_op+0x38/0x80)
    [<c03fe240>] (crypto_ahash_op) from [<c03fe2e0>] (crypto_ahash_final+0x20/0x24)
    [<c03fe2c0>] (crypto_ahash_final) from [<c03f19a8>] (ima_calc_file_hash+0x29c/0xa40)
    [<c03f170c>] (ima_calc_file_hash) from [<c03f2b24>] (ima_collect_measurement+0x1dc/0x240)
    [<c03f2948>] (ima_collect_measurement) from [<c03f0a60>] (process_measurement+0x4c4/0x6b8)
    [<c03f059c>] (process_measurement) from [<c03f0cdc>] (ima_file_check+0x88/0xa4)
    [<c03f0c54>] (ima_file_check) from [<c02d8adc>] (path_openat+0x5d8/0x1364)
    [<c02d8504>] (path_openat) from [<c02dad24>] (do_filp_open+0x84/0xf0)
    [<c02daca0>] (do_filp_open) from [<c02cf50c>] (do_open_execat+0x84/0x1b0)
    [<c02cf488>] (do_open_execat) from [<c02d1058>] (__do_execve_file+0x43c/0x890)
    [<c02d0c1c>] (__do_execve_file) from [<c02d1770>] (sys_execve+0x44/0x4c)
    [<c02d172c>] (sys_execve) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
    ---[ end trace 3455789a10e3aefd ]---

The cause is that the struct ahash_request *req is created as a
stack-local variable up in the stack (presumably somewhere in the IMA
implementation), then passed down into the CAAM driver, which tries to
dma_single_map the req->result (indirectly via map_seq_out_ptr_result)
in order to make that buffer available for the CAAM to store the result
of the following hash operation.

The calling code doesn't know how req will be used by the CAAM driver,
and there could be other such occurrences where stack memory is passed
down to the CAAM driver. Therefore we should rather fix this issue in
the CAAM driver where the requirements are known."

Fix this problem by:
-instructing the crypto engine to write the final hash in state->caam_ctx
-subsequently memcpy-ing the final hash into req->result

Cc: <stable@vger.kernel.org> # v4.19+
Reported-by: NRoland Hieber <rhi@pengutronix.de>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Tested-by: NRoland Hieber <rhi@pengutronix.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 42e95d1f10dcf8b18b1d7f52f7068985b3dc5b79 upstream.

when the source sg contains more than 1 fragment and
destination sg contains 1 fragment, the caam driver
mishandle the buffers to be sent to caam.

Fixes: f2147b88 ("crypto: caam - Convert GCM to new AEAD interface")
Cc: <stable@vger.kernel.org> # 4.2+
Signed-off-by: NPankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: NArun Pathak <arun.pathak@nxp.com>
Reviewed-by: NHoria Geanta <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b5be853181a8d4a6e20f2073ccd273d6280cad88 upstream.

Add missing break statement in order to prevent the code from falling
through to case S_DIN_to_DES.

This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.

Fixes: 63ee04c8 ("crypto: ccree - add skcipher support")
Cc: stable@vger.kernel.org
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 65055e2108847af5e577cc7ce6bde45ea136d29a upstream.

When driver started using state->caam_ctxt for storing both running hash
and final hash, it was not updated to handle different DMA unmap
lengths.

Cc: <stable@vger.kernel.org> # v4.19+
Fixes: c19650d6ea99 ("crypto: caam - fix DMA mapping of stack memory")
Signed-off-by: NFranck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a1d75dad3a2c689e70a1c4e0214cca9de741d0aa upstream.

There is a bug in the channel allocation logic that leads to an endless
loop when looking for a contiguous range of channels in a range with a
mixture of free and occupied channels. For example, opening three
consequtive channels, closing the first two and requesting 4 channels in
a row will trigger this soft lockup. The bug is that the search loop
forgets to skip over the range once it detects that one channel in that
range is occupied.

Restore the original intent to the logic by fixing the omission.
Signed-off-by: NZhi Jin <zhi.jin@intel.com>
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: 7bd1d409 ("stm class: Introduce an abstraction for System Trace Module devices")
CC: stable@vger.kernel.org # v4.4+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b5958faa34e2f99f3475ad89c52d98dfea079d33 upstream.

Fix unbalanced module reference counting during internal reset, which
prevents the drivers unloading.
Tracking mei_me/txe modules on mei client bus via
mei_cldev_enable/disable is error prone due to possible internal
reset flow, where clients are disconnected underneath.
Moving reference counting to probe and release of mei bus client
driver solves this issue in simplest way, as each client provides only
a single connection to a client bus driver.

Cc: <stable@vger.kernel.org>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 37fd0b623023484ef6df79ed46f21f06ecc611ff upstream.

The list of supported functions can be altered upon link reset,
clean the flags to allow correct selections of supported
features.

Cc: <stable@vger.kernel.org> v4.19+
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2ea8bab4dd2a9014e723b28091831fa850b82d83 upstream.

Fix NULL pointer exception on device unbind when device tree does not
contain "has-touchscreen" property.  In such case the input device is
not registered so it should not be unregistered.

    $ echo "12d10000.adc" > /sys/bus/platform/drivers/exynos-adc/unbind

    Unable to handle kernel NULL pointer dereference at virtual address 00000474
    ...
    (input_unregister_device) from [<c0772060>] (exynos_adc_remove+0x20/0x80)
    (exynos_adc_remove) from [<c0587d5c>] (platform_drv_remove+0x20/0x40)
    (platform_drv_remove) from [<c05860f0>] (device_release_driver_internal+0xdc/0x1ac)
    (device_release_driver_internal) from [<c0583ecc>] (unbind_store+0x60/0xd4)
    (unbind_store) from [<c031b89c>] (kernfs_fop_write+0x100/0x1e0)
    (kernfs_fop_write) from [<c029709c>] (__vfs_write+0x2c/0x17c)
    (__vfs_write) from [<c0297374>] (vfs_write+0xa4/0x184)
    (vfs_write) from [<c0297594>] (ksys_write+0x4c/0xac)
    (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)

Fixes: 2bb8ad9b ("iio: exynos-adc: add experimental touchscreen support")
Cc: <stable@vger.kernel.org>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 05bd7fcdd06b19a10f069af1bea3ad9abac038d7 upstream.

The ADCs are sleeping when the SLEEP bit is set and running when it's
cleared, so the bit should be inverted.
Tested on pcm1863.
Signed-off-by: NCodrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: NAndrew F. Davis <afd@ti.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fcf4daabf08079e6d09958a2992e7446ef8d0438 upstream.

According to DS, the gain is between -12 dB and 40 dB, with a 0.5 dB step.
Tested on pcm1863.
Signed-off-by: NCodrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: NAndrew F. Davis <afd@ti.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cc29ea007347f39f4c5a4d27b0b555955a0277f9 upstream.

The ESAI_xCR_xWA is xCR's bit, not the xCCR's bit, driver set it to
wrong register, correct it.

Fixes 43d24e76 ("ASoC: fsl_esai: Add ESAI CPU DAI driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: NShengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: NFabio Estevam <festevam@gmail.com>
Ackedy-by: NNicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bb06c388fa20ae24cfe80c52488de718a7e3a53f upstream.

If msize is less than 4096, we should close and put trans, destroy
tagpool, not just free client. This patch fixes that.

Link: http://lkml.kernel.org/m/1552464097-142659-1-git-send-email-zhengbin13@huawei.com
Cc: stable@vger.kernel.org
Fixes: 574d356b7a02 ("9p/net: put a lower bound on msize")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: Nzhengbin <zhengbin13@huawei.com>
Signed-off-by: NDominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5e3cc1ee1405a7eb3487ed24f786dec01b4cbe1f upstream.

Use inode->i_lock to protect i_size_write(), else i_size_read() in
generic_fillattr() may loop infinitely in read_seqcount_begin() when
multiple processes invoke v9fs_vfs_getattr() or v9fs_vfs_getattr_dotl()
simultaneously under 32-bit SMP environment, and a soft lockup will be
triggered as show below:

  watchdog: BUG: soft lockup - CPU#5 stuck for 22s! [stat:2217]
  Modules linked in:
  CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
  Hardware name: Generic DT based system
  PC is at generic_fillattr+0x104/0x108
  LR is at 0xec497f00
  pc : [<802b8898>]    lr : [<ec497f00>]    psr: 200c0013
  sp : ec497e20  ip : ed608030  fp : ec497e3c
  r10: 00000000  r9 : ec497f00  r8 : ed608030
  r7 : ec497ebc  r6 : ec497f00  r5 : ee5c1550  r4 : ee005780
  r3 : 0000052d  r2 : 00000000  r1 : ec497f00  r0 : ed608030
  Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
  Control: 10c5387d  Table: ac48006a  DAC: 00000051
  CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
  Hardware name: Generic DT based system
  Backtrace:
  [<8010d974>] (dump_backtrace) from [<8010dc88>] (show_stack+0x20/0x24)
  [<8010dc68>] (show_stack) from [<80a1d194>] (dump_stack+0xb0/0xdc)
  [<80a1d0e4>] (dump_stack) from [<80109f34>] (show_regs+0x1c/0x20)
  [<80109f18>] (show_regs) from [<801d0a80>] (watchdog_timer_fn+0x280/0x2f8)
  [<801d0800>] (watchdog_timer_fn) from [<80198658>] (__hrtimer_run_queues+0x18c/0x380)
  [<801984cc>] (__hrtimer_run_queues) from [<80198e60>] (hrtimer_run_queues+0xb8/0xf0)
  [<80198da8>] (hrtimer_run_queues) from [<801973e8>] (run_local_timers+0x28/0x64)
  [<801973c0>] (run_local_timers) from [<80197460>] (update_process_times+0x3c/0x6c)
  [<80197424>] (update_process_times) from [<801ab2b8>] (tick_nohz_handler+0xe0/0x1bc)
  [<801ab1d8>] (tick_nohz_handler) from [<80843050>] (arch_timer_handler_virt+0x38/0x48)
  [<80843018>] (arch_timer_handler_virt) from [<80180a64>] (handle_percpu_devid_irq+0x8c/0x240)
  [<801809d8>] (handle_percpu_devid_irq) from [<8017ac20>] (generic_handle_irq+0x34/0x44)
  [<8017abec>] (generic_handle_irq) from [<8017b344>] (__handle_domain_irq+0x6c/0xc4)
  [<8017b2d8>] (__handle_domain_irq) from [<801022e0>] (gic_handle_irq+0x4c/0x88)
  [<80102294>] (gic_handle_irq) from [<80101a30>] (__irq_svc+0x70/0x98)
  [<802b8794>] (generic_fillattr) from [<8056b284>] (v9fs_vfs_getattr_dotl+0x74/0xa4)
  [<8056b210>] (v9fs_vfs_getattr_dotl) from [<802b8904>] (vfs_getattr_nosec+0x68/0x7c)
  [<802b889c>] (vfs_getattr_nosec) from [<802b895c>] (vfs_getattr+0x44/0x48)
  [<802b8918>] (vfs_getattr) from [<802b8a74>] (vfs_statx+0x9c/0xec)
  [<802b89d8>] (vfs_statx) from [<802b9428>] (sys_lstat64+0x48/0x78)
  [<802b93e0>] (sys_lstat64) from [<80101000>] (ret_fast_syscall+0x0/0x28)

[dominique.martinet@cea.fr: updated comment to not refer to a function
in another subsystem]
Link: http://lkml.kernel.org/r/20190124063514.8571-2-houtao1@huawei.com
Cc: stable@vger.kernel.org
Fixes: 7549ae3e ("9p: Use the i_size_[read, write]() macros instead of using inode->i_size directly.")
Reported-by: NXing Gaopeng <xingaopeng@huawei.com>
Signed-off-by: NHou Tao <houtao1@huawei.com>
Signed-off-by: NDominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5e99456c20f712dcc13d9f6ca4278937d5367355 upstream.

Userspace shouldn't set bytesused to 0 for output buffers.
vb2_warn_zero_bytesused() warns about this (only once!), but it also
calls WARN_ON(1), which is confusing since it is not immediately clear
that it warns about a 0 value for bytesused.

Just drop the WARN_ON as it serves no purpose.
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: NEzequiel Garcia <ezequiel@collabora.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Matthias Maennich <maennich@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7fbe078c37aba3088359c9256c1a1d0c3e39ee81 upstream.

The vsock core only supports 32bit CID, but the Virtio-vsock spec define
CID (dst_cid and src_cid) as u64 and the upper 32bits is reserved as
zero. This inconsistency causes one bug in vhost vsock driver. The
scenarios is:

  0. A hash table (vhost_vsock_hash) is used to map an CID to a vsock
  object. And hash_min() is used to compute the hash key. hash_min() is
  defined as:
  (sizeof(val) <= 4 ? hash_32(val, bits) : hash_long(val, bits)).
  That means the hash algorithm has dependency on the size of macro
  argument 'val'.
  0. In function vhost_vsock_set_cid(), a 64bit CID is passed to
  hash_min() to compute the hash key when inserting a vsock object into
  the hash table.
  0. In function vhost_vsock_get(), a 32bit CID is passed to hash_min()
  to compute the hash key when looking up a vsock for an CID.

Because the different size of the CID, hash_min() returns different hash
key, thus fails to look up the vsock object for an CID.

To fix this bug, we keep CID as u64 in the IOCTLs and virtio message
headers, but explicitly convert u64 to u32 when deal with the hash table
and vsock core.

Fixes: 834e772c8db0 ("vhost/vsock: fix use-after-free in network stack callers")
Link: https://github.com/stefanha/virtio/blob/vsock/trunk/content.texSigned-off-by: NZha Bin <zhabin@linux.alibaba.com>
Reviewed-by: NLiu Jiang <gerry@linux.alibaba.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NShengjing Zhu <i@zhsj.me>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cdec2141c24ef177d929765c5a6f95549c266fb3 upstream.

When XDP is enabled, the driver will report incorrect
statistics. Received frames will reported as transmitted frames.

This commits fixes the i40e implementation of ndo_get_stats64 (struct
net_device_ops), so that iproute2 will report correct statistics
(e.g. when running "ip -stats link show dev eth0") even when XDP is
enabled.
Reported-by: NJesper Dangaard Brouer <brouer@redhat.com>
Fixes: 74608d17 ("i40e: add support for XDP_TX action")
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Emeric Brun <ebrun@haproxy.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 51232df5e4b268936beccde5248f312a316800be upstream.

When the managed cache is enabled, the last reference count
of a workgroup must be used for its workstation.

Otherwise, it could lead to incorrect (un)freezes in
the reclaim path, and it would be harmful.

A typical race as follows:

Thread 1 (In the reclaim path)  Thread 2
workgroup_freeze(grp, 1)                                refcnt = 1
...
workgroup_unfreeze(grp, 1)                              refcnt = 1
                                workgroup_get(grp)      refcnt = 2 (x)
workgroup_put(grp)                                      refcnt = 1 (x)
                                ...unexpected behaviors

* grp is detached but still used, which violates cache-managed
  freeze constraint.
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NGao Xiang <gaoxiang25@huawei.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 25dc194b34dd5919dd07b8873ee338182e15df9d upstream.

The prepare_fb call always happens on new_plane_state.

The drm_atomic_helper_cleanup_planes checks to see if
plane state pointer has changed when deciding to call cleanup_fb on
either the new_plane_state or the old_plane_state.

For a non-async atomic commit the state pointer is swapped, so this
helper calls prepare_fb on the new_plane_state and cleanup_fb on the
old_plane_state. This makes sense, since we want to prepare the
framebuffer we are going to use and cleanup the the framebuffer we are
no longer using.

For the async atomic update helpers this differs. The async atomic
update helpers perform in-place updates on the existing state. They call
drm_atomic_helper_cleanup_planes but the state pointer is not swapped.
This means that prepare_fb is called on the new_plane_state and
cleanup_fb is called on the new_plane_state (not the old).

In the case where old_plane_state->fb == new_plane_state->fb then
there should be no behavioral difference between an async update
and a non-async commit. But there are issues that arise when
old_plane_state->fb != new_plane_state->fb.

The first is that the new_plane_state->fb is immediately cleaned up
after it has been prepared, so we're using a fb that we shouldn't
be.

The second occurs during a sequence of async atomic updates and
non-async regular atomic commits. Suppose there are two framebuffers
being interleaved in a double-buffering scenario, fb1 and fb2:

- Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1
- Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2
- Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2

We call cleanup_fb on fb2 twice in this example scenario, and any
further use will result in use-after-free.

The simple fix to this problem is to block framebuffer changes
in the drm_atomic_helper_async_check function for now.

v2: Move check by itself, add a FIXME (Daniel)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: <stable@vger.kernel.org> # v4.14+
Fixes: fef9df8b ("drm/atomic: initial support for asynchronous plane update")
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/275364/Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b761dcf1217760a42f7897c31dcb649f59b2333e upstream.

In reshape_request it already adds len to sector_nr already. It's wrong to add len to
sector_nr again after adding pages to bio. If there is bad block it can't copy one chunk
at a time, it needs to goto read_more. Now the sector_nr is wrong. It can cause data
corruption.

Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: NXiao Ni <xni@redhat.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c634dc6bdedeb0b2c750fc611612618a85639ab2 upstream.

Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort")
Signed-off-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: kbuild-all@01.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ede271b059463731cbd6dffe55ffd70d7dbe8392 upstream.

Through:

  validate_event()
    x86_pmu.get_event_constraints(.idx=-1)
      tfa_get_event_constraints()
        dyn_constraint()

cpuc->constraint_list[-1] is used, which is an obvious out-of-bound access.

In this case, simply skip the TFA constraint code, there is no event
constraint with just PMC3, therefore the code will never result in the
empty set.

Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort")
Reported-by: NTony Jones <tonyj@suse.com>
Reported-by: N"DSouza, Nelson" <nelson.dsouza@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NTony Jones <tonyj@suse.com>
Tested-by: N"DSouza, Nelson" <nelson.dsouza@intel.com>
Cc: eranian@google.com
Cc: jolsa@redhat.com
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/20190314130705.441549378@infradead.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cbc05fd6708c1744ee6a61cb4c461ff956d30524 upstream.

The Acer TravelMate X514-51T with ALC255 cannot detect the headset MIC
until ALC255_FIXUP_ACER_HEADSET_MIC quirk applied.  Although, the
internal DMIC uses another module - snd_soc_skl as the driver.  We still
need the NID 0x1a in the quirk to enable the headset MIC.
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c0ca5eced22215c1e03e3ad479f8fab0bbb30772 upstream.

Dell Precision 5820 with ALC3234 codec (which is equivalent with
ALC255) shows click noises at (runtime) PM resume on the headphone.
The biggest source of the noise comes from the cleared headphone pin
control at resume, which is done via the standard shutup procedure.

Although we have an override of the standard shutup callback to
replace with NOP, this would skip other needed stuff (e.g. the pull
down of headset power).  So, instead, this "fixes" the behavior of
alc_fixup_no_shutup() by introducing spec->no_shutup_pins flag.
When this flag is set, Realtek codec won't call the standard
snd_hda_shutup_pins() & co.  Now alc_fixup_no_shutup() just sets this
flag instead of overriding spec->shutup callback itself.  This allows
us to apply the similar fix for other entries easily if needed in
future.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8bb37a2a4d7c02affef554f5dc05f6d2e39c31f9 upstream.

The ASUS UX362FA with ALC294 cannot detect the headset MIC and outputs
through the internal speaker and the headphone.  This issue can be fixed
by the quirk in the commit 4e0511067 ALSA: hda/realtek: Enable audio
jacks of ASUS UX533FD with ALC294.

Besides, ASUS UX362FA and UX533FD have the same audio initial pin config
values.  So, this patch replaces SND_PCI_QUIRK of UX533FD with a new
SND_HDA_PIN_QUIRK which benefits both UX362FA and UX533FD.

Fixes: 4e051106730d ("ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294")
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: NMing Shuo Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 167897f4b32c2bc18b3b6183029a33fb420a114e upstream.

Apply the HP_MIC_NO_PRESENCE fixups for the more HP Z2 G4 and
HP Z240 models.
Reported-by: NJeff Burrell <jeff.burrell@hp.com>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cfc35f9c128cea8fce6a5513b1de50d36f3b209f upstream.

I set 10 seconds for the timeout of the i915 audio component binding
with a hope that recent machines are fast enough to handle all probe
tasks in that period, but I was too optimistic.  The binding may take
longer than that, and this caused a problem on the machine with both
audio and graphics driver modules loaded in parallel, as Paul Menzel
experienced.  This problem haven't hit so often just because the KMS
driver is loaded in initrd on most machines.

As a simple workaround, extend the timeout to 60 seconds.

Fixes: f9b54e19 ("ALSA: hda/i915: Allow delayed i915 audio component binding")
Reported-by: NPaul Menzel <pmenzel+alsa-devel@molgen.mpg.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>