- 02 6月, 2007 10 次提交
-
-
由 Mike Christie 提交于
The attached patches add sysfs files for the chap settings to the iscsi transport class, iscsi_tcp and ib_iser. This is needed for software iscsi because there are times when iscsid can die and it will need to reread the values it was using. And it is needed by qla4xxx for basic management opertaions. This patch does not hook in qla4xxx yet, because I am not sure the mbx command to use. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
- Remove shadow of request length from struct iscsi_cmd_task. - change all users to use scsi_cmnd->request_bufflen directly (With bidi we will use scsi-ml API to retrieve in/out length) Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
This patch fixes handling of expected datasn/r2tsn as received from target. It is done according to: T10 rfc3720 section 3.2.2.3. Data Sequencing. . unify expected datasn/r2tsn into one counter . calculate than check expected datasn/r2tsn. On error print a message and fail the request. (TODO use iscsi retransmits) . remove the FIXME ;) . avoid zero length memset Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
For iscsi root boot, software iscsi needs to know what the BIOS/OF initiator used for the initiator name so this puts it in sysfs for userspace to be able to pick up. For hw iscsi, it is nice to see what the card is using. This patch adds the new param, and hooks in qla4xxx, iscsi_tcp, and ib_iser. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Cc: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
iscsid and udev need to key off the hw address being used so add some helpers for iser and iscsi tcp. Also convert them Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
The iscsi class uses the set_param event to set session and connection params. This patch adds a set_host_param so we can set host level values. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
We are going to be adding more host level sysfs attrs and set_params, so this patch has them take a scsi_host instead of either a scsi_host or host no. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Cc: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
Export mac as hw address. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Cc: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
Add hw address sysfs file. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
Let's not oops when we cannot allocate a skb! Add a check for if alloc_skb fails. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 01 6月, 2007 8 次提交
-
-
由 Salyzyn, Mark 提交于
Inspired by Brian King's patch to the ibmvscsi driver. Adds support for a changeable queue depth to the aacraid driver. Signed-off-by: NMark Salyzyn <aacraid@adaptec.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 FUJITA Tomonori 提交于
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NSumant Patro <sumant.patro@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 FUJITA Tomonori 提交于
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NSumant Patro <sumant.patro@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 FUJITA Tomonori 提交于
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NSumant Patro <sumant.patro@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NDavid Miller <davem@davemloft.net> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
Currently accessing the scsi host private data is rather messy because it comes as an unsigned long that always needs a cast first. This patch introduces a helper that does the cast called shost_priv. It's similar in spirit to netdev_priv for network drivers. This is the first patch introducing the macro, and the second patch in the series will convert esp and it's subdrivers as an example. Further conversion will wait until the helper is in the tree to make patch juggling easier. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 FUJITA Tomonori 提交于
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> ACK. Code inspected. Driver changes NOT unit tested or compile tested. Acked-by: N"Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 FUJITA Tomonori 提交于
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 31 5月, 2007 12 次提交
-
-
由 FUJITA Tomonori 提交于
This removes the remaining unnecessary map_single path Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Bottomley 提交于
Conflicts: drivers/scsi/jazz_esp.c Same changes made by both SCSI and SPARC trees: problem with UTF-8 conversion in the copyright. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 FUJITA Tomonori 提交于
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NAdam Radford <linuxraid@amcc.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 FUJITA Tomonori 提交于
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NAdam Radford <linuxraid@amcc.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Bryan Wu 提交于
It should be pass "newsize" to vmtruncate function to modify the inode->i_size, while the old size is passed to vmtruncate. This bug was caught by LTP truncate test case on Blackfin platform. After it was fixed, the LTP truncate test case passed. Signed-off-by: NBryan Wu <bryan.wu@analog.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Trond Myklebust 提交于
The current code is leaking a reference to dreq->kref when the calls to nfs_direct_read_schedule() and nfs_direct_write_schedule() return an error. This patch moves the call to kref_put() from nfs_direct_wait() back into nfs_direct_read() and nfs_direct_write() (which are the functions that actually took the reference in the first place) fixing the leak. Thanks to Denis V. Lunev for spotting the bug and proposing the original fix. Acked-by: NDenis V. Lunev <dlunev@gmail.com> Acked-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Kyle McMartin 提交于
ugh, this function gets called by our unwinder. recursive backtrace for the win... bisection to find this one was "fun." Signed-off-by: NKyle McMartin <kyle@parisc-linux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Henderson 提交于
Some of the new syscalls require supporting TIF_RESTORE_SIGMASK. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Henderson 提交于
Remove 2 functions private to the alpha implemetation, in favor of similar functions in <linux/log2.h>. Provide a more efficient version of the fls64 function for pre-ev67 alphas. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Fix some section mismatch warnings [ARM] 4417/1: Serial: Fix AMBA drivers locking [ARM] 4394/1: ARMv7: Add the TLB range operations [ARM] 4410/1: Remove extern declarations in coyote/ixdpg425-pci.c [ARM] 4416/1: NWFPE: fix undeclared symbols [ARM] 4415/1: AML5900: fix sparse warnings from map_io [ARM] 4414/1: S3C2443: sparse fix for clock.c [ARM] 4412/1: S3C2412: reset errata fix [ARM] 4411/1: KS8695: Another serial driver fix [ARM] oprofile: avoid lockdep warnings on mpcore oprofile init [ARM] Fix stacktrace FP range checking [ARM] use __used attribute [ARM] enable arbitary speed tty ioctls and split input/output speed [ARM] remove unused header file: arch/arm/mach-s3c2410/bast.h [ARM] 4406/1: Trivial NSLU2 / NAS-100D header & setup code cleanup [ARM] 4405/1: NSLU2, DSM-G600 frequency fixup code [ARM] 4404/1: Trivial IXP42x Kconfig cleanup [ARM] 4403/1: Make the PXA-I2C driver work with lockdep validator [ARM] 4402/1: S3C2443: Add physical address of HSMMC controller [ARM] 4401/1: S3C2443: Add definitions for port GPIOJ
-
由 Russell King 提交于
The following patch fixes these section mismatch warnings: WARNING: arch/arm/mach-at91/built-in.o(.text+0xdf4): Section mismatch: reference to .init.data:dk_nand_partition (between 'nand_partitions' and 'at91_leds_event') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (between 'nand_partitions' and 'ads7843_pendown_state') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-at91/built-in.o(.text+0xc28): Section mismatch: reference to .init.data:kb9202_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-footbridge/built-in.o(.text+0xaa4): Section mismatch: reference to .init.data:cats_pci (between 'cats_pci_init' and 'ebsa285_leds_event')WARNING: arch/arm/mach-ixp2000/built-in.o(.text+0xb54): Section mismatch: reference to .init.text:ixp2000_init_irq (between 'ixdp2x00_init_irq' and 'ixdp2x00_irq_handler') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x670): Section mismatch: reference to .init.text:ixp23xx_pci_common_init (between 'ixp23xx_pci_slave_init' and 'ixp23xx_pci_scan_bus') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x890): Section mismatch: reference to .init.text:ixp23xx_init_irq (between 'ixdp2351_init_irq' and 'roadrunner_pci_preinit') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x9a8): Section mismatch: reference to .init.text:ixp23xx_pci_preinit (after 'roadrunner_pci_preinit') WARNING: arch/arm/mach-imx/built-in.o(__ksymtab+0x80): Section mismatch: reference to .init.text:imx_set_mmc_info (between '__ksymtab_imx_set_mmc_info' and '__ksymtab_set_imx_fb_info') WARNING: arch/arm/mach-imx/built-in.o(__ksymtab+0x88): Section mismatch: reference to .init.text:set_imx_fb_info (after '__ksymtab_set_imx_fb_info') WARNING: arch/arm/mach-sa1100/built-in.o(.text+0x1930): Section mismatch: reference to .init.data:neponset_port_fns (between 'neponset_probe' and 'assabet_leds_event') WARNING: drivers/built-in.o(.text+0x3f100): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x3f1c8): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x4f988): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x4fa50): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: ehea: Fixed multi queue RX bug sky2: enable IRQ on duplex renegotiation e1000: restore netif_poll_enable call but make sure IRQs are off defxx: Fix the handling of ioremap() failures sky2: program proper register for fiber PHY sky2: checksum offload plus vlan bug sky2: dont set bogus bit in PHY register [PATCH] hostap: Allocate enough tailroom for TKIP [PATCH] softmac: alloc_ieee80211() NULL check [PATCH] ieee80211: fix incomplete error message [PATCH] prism54: fix monitor mode oops
-
- 30 5月, 2007 10 次提交
-
-
git://oss.sgi.com:8090/xfs/xfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Write at EOF may not update filesize correctly.
-
由 Thomas Klein 提交于
Must access the respective queue's dummy netdev instead of the port's netdev. Signed-off-by: NThomas Klein <tklein@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Don't want IRQ on FIFO error because there is nothing useful to do with it. But do want IRQ on duplex change. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Herbert Xu 提交于
This restores the previously removed netif_poll_enable call in e1000_open. It's needed on all but the first call to e1000_open for a NIC as e1000_close always calls netif_poll_disable. netif_poll_enable can only be called safely if no polls have been scheduled. This should be the case as long as we don't enter our IRQ handler. In order to guarantee this we explicitly disable IRQs as early as possible when we're probing the NIC. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Cc: "Kok, Auke" <auke-jan.h.kok@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Maciej W. Rozycki 提交于
If ioremap_nocache() is unfortunate enough to fail, the error code is not set correctly leading to a false success from dfx_register(). This change fixes the problem. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Driver was reading value from one register, setting bit and then writing the wrong register. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Driver was not correctly setting up transmit descriptor when doing VLAN tag insertion with checksum offload. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
This code inherited from the sk98lin driver is incorrect on the Yukon2. The GPHY_CTRL register values are specific to the internal PHY of the chip and the values used were leftovers. Driver was setting bit 13 which is now the INT polarity for the PHY! Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
-
由 Robert P. J. Day 提交于
Fix misspelled "spin_lock_irqrestore" to read "spin_unlock_irqrestore" instead. Presumably, GDTH_RTC doesn't get used a lot. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Acked-by: NAchim Leubner <achim_leubner@adaptec.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-