qla2x00_mem_alloc() returns 1 on success and -ENOMEM on failure.  On the
one hand the caller assumes non-zero is success but on the other hand
the caller also assumes that it returns an error code.

I've fixed it to return zero on success and a negative error code on
failure.  This matches the documentation as well.

[jejb: checkpatch fix]
Fixes: e315cd28 ('[SCSI] qla2xxx: Code changes for qla data structure refactoring')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

isci is needlessly tying libata's hands by returning
SAM_STAT_CHECK_CONDITION to some ata errors.  Instead, prefer
SAS_PROTO_RESPONSE to let libata (via sas_ata_task_done()) disposition
the device-to-host fis.

For example isci is triggering an HSM Violation where AHCI is showing a
simple media error for the same bus condition:

isci:
ata7.00: failed command: READ VERIFY SECTOR(S)
ata7.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0
         res 01/04:00:00:00:00/00:00:00:00:00/e0 Emask 0x3 (HSM violation)

ahci:
ata6.00: failed command: READ VERIFY SECTOR(S)
ata6.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0
         res 51/40:01:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)

Note that the isci response matches this from sas_ata_task_done():
	/* We saw a SAS error. Send a vague error. */
	[..]
	dev->sata_dev.fis[3] = 0x04; /* status err */
	dev->sata_dev.fis[2] = ATA_ERR;

The end effect is that isci is needlessly triggering hard resets when
they are not necessary.
Reported-by: NXun Ni <xun.ni@intel.com>
Tested-by: NNelson Cheng <nelson.cheng@intel.com>
Acked-by: NLukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

libsas sometimes short circuits timeouts to force commands into error
recovery.  It is misleading to log that the command timed-out in
sas_scsi_timed_out() when in fact it was just queued for error handling.
It's also redundant in the case of a true timeout as libata eh will
detect and report timeouts via it's AC_ERR_TIMEOUT facility.

Given that some environments consider "timeout" errors to be indicative
of impending device failure demote the sas_scsi_timed_out() timeout
message to be disabled by default.  This parallels ata_scsi_timed_out().

[jejb: checkpatch fix]
Reported-by: NXun Ni <xun.ni@intel.com>
Tested-by: NNelson Cheng <nelson.cheng@intel.com>
Acked-by: NLukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Send aborts to the firmware via the request/response queue mechanism.
Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

- Fix interpreting the wrong IOCB type for task management
functions in the response path.
- Merge the task management function handling for various adapters.
Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Allow for the capture of a firmware dump but have a sysfs node
(allow_cna_fw_dump) to allow the feature to be enabled/disabled dynamically.

The default is off.
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

[SCSI] qla2xxx: Add changes in the IOCB structures to adjust driver source codes to ISPFX00 firmware spec.
Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

[SCSI] qla2xxx: Remove ISP_ABORT_NEEDED and ISP_ABORT_RETRY checks from watchdog function for ISP8044.
Signed-off-by: NAtul Deshmukh <atul.deshmukh@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com>
Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Tell the mid-layer that number of commands we can queue is the available
resources we have minus a small amount for internal commands.
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NAtul Deshmukh <atul.deshmukh@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

[SCSI] qla2xxx: Replace constant value for IOCTL IOCB abort execution status with a macro for ISPFX00.
Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Old version: 2.4.1
New version: 2.4.2
Signed-off-by: NEddie Wai <eddie.wai@broadcom.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

SCSI retry delay upon SAM_STAT_BUSY/_SET_FULL was not being handled
in bnx2fc.  This patch adds such handling by returning TARGET_BUSY
to the SCSI ML for the corresponding LUN until the retry timer expires.
Signed-off-by: NEddie Wai <eddie.wai@broadcom.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

The problem has been identified to be a change in the scsi_remove_device
path where a call to the pm_runtime_set_memalloc_noio was added when
del_gendisk is called in this path.  Note that the new pm routine
attempts to cycle through all parent devices from the FC target device
to set the memalloc_noio flag.  Because of this new change, a dependency
was created between the FC target device and the parent netdev device
in the destroy path.

In order to synchronized the destroy paths, bnx2fc has been modified
to flush all destroy workqueues in the NETDEV_UNREGISTER return path.

[    4.123584] BUG: soft lockup - CPU#8 stuck for 22s! [kworker/8:3:8082]
[    4.123713] Call Trace:
[    4.123719]  [<ffffffff815dfbe0>] klist_next+0x20/0xf0
[    4.123725]  [<ffffffff813e9220>] ? pm_save_wakeup_count+0x70/0x70
[    4.123731]  [<ffffffff813d9e4e>] device_for_each_child+0x4e/0x70
[    4.123735]  [<ffffffff813e9554>] pm_runtime_set_memalloc_noio+0x94/0xf0
[    4.123740]  [<ffffffff812d4d74>] del_gendisk+0x264/0x2a0
[    4.123747]  [<ffffffffa00c6dc9>] sd_remove+0x69/0xb0 [sd_mod]
[    4.123751]  [<ffffffff813de24f>] __device_release_driver+0x7f/0xf0
[    4.123754]  [<ffffffff813de2e3>] device_release_driver+0x23/0x30
[    4.123757]  [<ffffffff813ddab4>] bus_remove_device+0xf4/0x170
[    4.123760]  [<ffffffff813da475>] device_del+0x135/0x1d0
[    4.123765]  [<ffffffff81411b75>] __scsi_remove_device+0xc5/0xd0
[    4.123768]  [<ffffffff81411ba6>] scsi_remove_device+0x26/0x40
[    4.123770]  [<ffffffff81411d40>] scsi_remove_target+0x160/0x210
[    4.123775]  [<ffffffffa0420e4c>] fc_rport_final_delete+0xac/0x1f0 [scsi_transport_fc]
[    4.123780]  [<ffffffff810774ab>] process_one_work+0x17b/0x460
[    4.123783]  [<ffffffff8107825b>] worker_thread+0x11b/0x400
[    4.123786]  [<ffffffff81078140>] ? rescuer_thread+0x3e0/0x3e0
[    4.123791]  [<ffffffff8107e9c0>] kthread+0xc0/0xd0
[    4.123794]  [<ffffffff8107e900>] ? kthread_create_on_node+0x110/0x110
[    4.123798]  [<ffffffff8160ceec>] ret_from_fork+0x7c/0xb0
[    4.123801]  [<ffffffff8107e900>] ? kthread_create_on_node+0x110/0x110
Signed-off-by: NEddie Wai <eddie.wai@broadcom.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

pm80xx_get_gsm_dump() was returning "1" in error case
instead of negative error value.
Signed-off-by: NViswas G <Viswas.G@pmcs.com>
Reviewed-by: NJack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Removed redundant code snippets in pm8001_hwi.c and
pm8001_ctl.c
Signed-off-by: NViswas G <Viswas.G@pmcs.com>
Reviewed-by: NJack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

If the initialization of storvsc fails, the storvsc_device_destroy()
causes NULL pointer dereference.

storvsc_bus_scan()
  scsi_scan_target()
    __scsi_scan_target()
      scsi_probe_and_add_lun(hostdata=NULL)
        scsi_alloc_sdev(hostdata=NULL)

	  sdev->hostdata = hostdata

	  now the host allocation fails

          __scsi_remove_device(sdev)

	  calls sdev->host->hostt->slave_destroy() ==
	  storvsc_device_destroy(sdev)
	    access of sdev->hostdata->request_mempool
Signed-off-by: NAles Novak <alnovak@suse.cz>
Signed-off-by: NThomas Abraham <tabraham@suse.com>
Reviewed-by: NJiri Kosina <jkosina@suse.cz>
Acked-by: NK. Y. Srinivasan <kys@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Cc: stable@vger.kernel.org
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

In the first place, the loop 'for' in the macro 'for_each_isci_host'
(drivers/scsi/isci/host.h:314) is incorrect, because it accesses
the 3rd element of 2 element array. After the 2nd iteration it executes
the instruction:
        ihost = to_pci_info(pdev)->hosts[2]
(while the size of the 'hosts' array equals 2) and reads an
out of range element.

In the second place, this loop is incorrectly optimized by GCC v4.8
(see http://marc.info/?l=linux-kernel&m=138998871911336&w=2).
As a result, on platforms with two SCU controllers,
the loop is executed more times than it can be (for i=0,1 and 2).
It causes kernel panic during entering the S3 state
and the following oops after 'rmmod isci':

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8131360b>] __list_add+0x1b/0xc0
Oops: 0000 [#1] SMP
RIP: 0010:[<ffffffff8131360b>]  [<ffffffff8131360b>] __list_add+0x1b/0xc0
Call Trace:
  [<ffffffff81661b84>] __mutex_lock_slowpath+0x114/0x1b0
  [<ffffffff81661c3f>] mutex_lock+0x1f/0x30
  [<ffffffffa03e97cb>] sas_disable_events+0x1b/0x50 [libsas]
  [<ffffffffa03e9818>] sas_unregister_ha+0x18/0x60 [libsas]
  [<ffffffffa040316e>] isci_unregister+0x1e/0x40 [isci]
  [<ffffffffa0403efd>] isci_pci_remove+0x5d/0x100 [isci]
  [<ffffffff813391cb>] pci_device_remove+0x3b/0xb0
  [<ffffffff813fbf7f>] __device_release_driver+0x7f/0xf0
  [<ffffffff813fc8f8>] driver_detach+0xa8/0xb0
  [<ffffffff813fbb8b>] bus_remove_driver+0x9b/0x120
  [<ffffffff813fcf2c>] driver_unregister+0x2c/0x50
  [<ffffffff813381f3>] pci_unregister_driver+0x23/0x80
  [<ffffffffa04152f8>] isci_exit+0x10/0x1e [isci]
  [<ffffffff810d199b>] SyS_delete_module+0x16b/0x2d0
  [<ffffffff81012a21>] ? do_notify_resume+0x61/0xa0
  [<ffffffff8166ce29>] system_call_fastpath+0x16/0x1b

The loop has been corrected.
This patch fixes kernel panic during entering the S3 state
and the above oops.
Signed-off-by: NLukasz Dorau <lukasz.dorau@intel.com>
Reviewed-by: NMaciej Patelczyk <maciej.patelczyk@intel.com>
Tested-by: NLukasz Dorau <lukasz.dorau@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Remove an erroneous BUG_ON() in the case of a hard reset timeout.  The
reset timeout handler puts the port into the "awaiting link-up" state.
The timeout causes the device to be disconnected and we need to be in
the awaiting link-up state to re-connect the port.  The BUG_ON() made
the incorrect assumption that resets never timeout and we always
complete the reset in the "resetting" state.

Testing this patch also uncovered that libata continues to attempt to
reset the port long after the driver has torn down the context.  Once
the driver has committed to abandoning the link it must indicate to
libata that recovery ends by returning -ENODEV from
->lldd_I_T_nexus_reset().

Cc: <stable@vger.kernel.org>
Acked-by: NLukasz Dorau <lukasz.dorau@intel.com>
Reported-by: NDavid Milburn <dmilburn@redhat.com>
Reported-by: NXun Ni <xun.ni@intel.com>
Tested-by: NXun Ni <xun.ni@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

https://bugzilla.kernel.org/show_bug.cgi?id=67091

Cc: Jayamohan Kallickal <Jayamohan.Kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This fixes requesting of the MSI-X vectors for the base response queue.
The iteration in the for loop in qla24xx_enable_msix() was incorrect.
We should only iterate of the first two MSI-X vectors and not the total
number of MSI-X vectors that have given to the driver for this device
from pci_enable_msix() in this function.

Cc: <stable@vger.kernel.org>
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Pull drm fixes from Dave Airlie:
 "Lots of little small things, nothing too major: nouveau regression
  fixes, vmware fixes for the new hw support, memory leaks in error path
  fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits)
  drm/radeon/ni: fix typo in dpm sq ramping setup
  drm/radeon/si: fix typo in dpm sq ramping setup
  drm/radeon: fix CP semaphores on CIK
  drm/radeon: delete a stray tab
  drm/radeon: fix display tiling setup on SI
  drm/radeon/dpm: reduce r7xx vblank mclk threshold to 200
  drm/radeon: fill in DRM_CAPs for cursor size
  drm: add DRM_CAPs for cursor size
  drm/radeon: unify bpc handling
  drm/ttm: Fix memory leak in ttm_agp_backend.c
  drm/ttm: declare 'struct device' in ttm_page_alloc.h
  drm/nouveau: fix TTM_PL_TT memtype on pre-nv50
  drm/nv50/disp: use correct register to determine DP display bpp
  drm/nouveau/fb: use correct ram oclass for nv1a hardware
  drm/nv50/gr: add missing nv_error parameter priv
  drm/nouveau: fix ENG_RUNLIST register address
  drm/nv4c/bios: disallow retrieving from prom on nv4x igp's
  drm/nv4c/vga: decode register is in a different place on nv4x igp's
  drm/nv4c/mc: nv4x igp's have a different msi rearm register
  drm/nouveau: set irq_enabled manually
  ...

Pull HID update from Jiri Kosina:

 - fixes for several bugs in incorrect allocations of buffers by David
   Herrmann and Benjamin Tissoires.

 - support for a few new device IDs by Archana Patni, Benjamin
   Tissoires, Huei-Horng Yo, Reyad Attiyat and Yufeng Shen

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hyperv: make sure input buffer is big enough
  HID: Bluetooth: hidp: make sure input buffers are big enough
  HID: hid-sensor-hub: quirk for STM Sensor hub
  HID: apple: add Apple wireless keyboard 2011 JIS model support
  HID: fix buffer allocations
  HID: multitouch: add FocalTech FTxxxx support
  HID: microsoft: Add ID's for Surface Type/Touch Cover 2
  HID: usbhid: quirk for CY-TM75 75 inch Touch Overlay

Pull networking fixes from David Miller:

 1) kvaser CAN driver has fixed limits of some of it's table, validate
    that we won't exceed those limits at probe time.  Fix from Olivier
    Sobrie.

 2) Fix rtl8192ce disabling interrupts for too long, from Olivier
    Langlois.

 3) Fix botched shift in ath5k driver, from Dan Carpenter.

 4) Fix corruption of deferred packets in TIPC, from Erik Hugne.

 5) Fix newlink error path in macvlan driver, from Cong Wang.

 6) Fix netpoll deadlock in bonding, from Ding Tianhong.

 7) Handle GSO packets properly in forwarding path when fragmentation is
    necessary on egress, from Florian Westphal.

 8) Fix axienet build errors, from Michal Simek.

 9) Fix refcounting of ubufs on tx in vhost net driver, from Michael S
    Tsirkin.

10) Carrier status isn't set properly in hyperv driver, from Haiyang
    Zhang.

11) Missing pci_disable_device() in tulip_remove_one), from Ingo Molnar.

12) AF_PACKET qdisc bypass mode doesn't adhere to driver provided TX
    queue selection method.  Add a fallback method mechanism to fix this
    bug, from Daniel Borkmann.

13) Fix regression in link local route handling on GRE tunnels, from
    Nicolas Dichtel.

14) Bonding can assign dup aggregator IDs in some sequences of
    configuration, fix by making the allocation counter per-bond instead
    of global.  From Jiri Bohac.

15) sctp_connectx() needs compat translations, from Daniel Borkmann.

16) Fix of_mdio PHY interrupt parsing, from Ben Dooks

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
  MAINTAINERS: add entry for the PHY library
  of_mdio: fix phy interrupt passing
  net: ethernet: update dependency and help text of mvneta
  NET: fec: only enable napi if we are successful
  af_packet: remove a stray tab in packet_set_ring()
  net: sctp: fix sctp_connectx abi for ia32 emulation/compat mode
  ipv4: fix counter in_slow_tot
  irtty-sir.c: Do not set_termios() on irtty_close()
  bonding: 802.3ad: make aggregator_identifier bond-private
  usbnet: remove generic hard_header_len check
  gre: add link local route when local addr is any
  batman-adv: fix potential kernel paging error for unicast transmissions
  batman-adv: avoid double free when orig_node initialization fails
  batman-adv: free skb on TVLV parsing success
  batman-adv: fix TT CRC computation by ensuring byte order
  batman-adv: fix potential orig_node reference leak
  batman-adv: avoid potential race condition when adding a new neighbour
  batman-adv: properly check pskb_may_pull return value
  batman-adv: release vlan object after checking the CRC
  batman-adv: fix TT-TVLV parsing on OGM reception
  ...

Pull ARM fixes from Russell King:
 "A range of ARM fixes.  Biggest change is the stage-2 attributes used
  for for hyp mode which were wrong.  I've killed some bits in a couple
  of DT files which turned out not to be required, and a few other
  fixes.

  One fix touches code outside of arch/arm, which is related to sorting
  out the DMA masks correctly.  There is a long standing issue with the
  conversion from PFNs to addresses where people assume that shifting an
  unsigned long left by PAGE_SHIFT results in a correct address.  This
  is not the case with C: the integer promotion happens at assignment
  after evaluation.  This fixes the recently introduced dma_max_pfn()
  function, but there's a number of other places where we try this
  directly on an unsigned long in the mm code"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 7957/1: add DSB after icache flush in __flush_icache_all()
  Fix uses of dma_max_pfn() when converting to a limiting address
  ARM: 7955/1: spinlock: ensure we have a compiler barrier before sev
  ARM: 7953/1: mm: ensure TLB invalidation is complete before enabling MMU
  ARM: 7952/1: mm: Fix the memblock allocation for LPAE machines
  ARM: 7950/1: mm: Fix stage-2 device memory attributes
  ARM: dts: fix spdif pinmux configuration