- 15 1月, 2016 27 次提交
-
-
由 Vladimir Davydov 提交于
Currently, all kmem allocations (namely every kmem_cache_alloc, kmalloc, alloc_kmem_pages call) are accounted to memory cgroup automatically. Callers have to explicitly opt out if they don't want/need accounting for some reason. Such a design decision leads to several problems: - kmalloc users are highly sensitive to failures, many of them implicitly rely on the fact that kmalloc never fails, while memcg makes failures quite plausible. - A lot of objects are shared among different containers by design. Accounting such objects to one of containers is just unfair. Moreover, it might lead to pinning a dead memcg along with its kmem caches, which aren't tiny, which might result in noticeable increase in memory consumption for no apparent reason in the long run. - There are tons of short-lived objects. Accounting them to memcg will only result in slight noise and won't change the overall picture, but we still have to pay accounting overhead. For more info, see - http://lkml.kernel.org/r/20151105144002.GB15111%40dhcp22.suse.cz - http://lkml.kernel.org/r/20151106090555.GK29259@esperanza Therefore this patchset switches to the white list policy. Now kmalloc users have to explicitly opt in by passing __GFP_ACCOUNT flag. Currently, the list of accounted objects is quite limited and only includes those allocations that (1) are known to be easily triggered from userspace and (2) can fail gracefully (for the full list see patch no. 6) and it still misses many object types. However, accounting only those objects should be a satisfactory approximation of the behavior we used to have for most sane workloads. This patch (of 6): Revert 499611ed ("kernfs: do not account ino_ida allocations to memcg"). Black-list kmem accounting policy (aka __GFP_NOACCOUNT) turned out to be fragile and difficult to maintain, because there seem to be many more allocations that should not be accounted than those that should be. Besides, false accounting an allocation might result in much worse consequences than not accounting at all, namely increased memory consumption due to pinned dead kmem caches. So it was decided to switch to the white-list policy. This patch reverts bits introducing the black-list policy. The white-list policy will be introduced later in the series. Signed-off-by: NVladimir Davydov <vdavydov@virtuozzo.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geliang Tang 提交于
Add a new helper function get_first_slab() that get the first slab from a kmem_cache_node. Signed-off-by: NGeliang Tang <geliangtang@163.com> Acked-by: NChristoph Lameter <cl@linux.com> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geliang Tang 提交于
Simplify the code with list_for_each_entry(). Signed-off-by: NGeliang Tang <geliangtang@163.com> Acked-by: NChristoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geliang Tang 提交于
Simplify the code with list_first_entry_or_null(). Signed-off-by: NGeliang Tang <geliangtang@163.com> Acked-by: NChristoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
A little cleanup - the invocation site provdes the semicolon. Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joseph Qi 提交于
lksb flags are defined both in dlmapi.h and dlmcommon.h. So clean them up from dlmcommon.h. Signed-off-by: NJoseph Qi <joseph.qi@huawei.com> Reviewed-by: NJiufei Xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Junxiao Bi 提交于
Found this when do patch review, remove to make it clear and save a little cpu time. Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joseph Qi 提交于
In ocfs2_orphan_del, currently it finds and deletes entry first, and then access orphan dir dinode. This will have a problem once ocfs2_journal_access_di fails. In this case, entry will be removed from orphan dir, but in deed the inode hasn't been deleted successfully. In other words, the file is missing but not actually deleted. So we should access orphan dinode first like unlink and rename. Signed-off-by: NJoseph Qi <joseph.qi@huawei.com> Reviewed-by: NJiufei Xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 xuejiufei 提交于
When two processes are migrating the same lockres, dlm_add_migration_mle() return -EEXIST, but insert a new mle in hash list. dlm_migrate_lockres() will detach the old mle and free the new one which is already in hash list, that will destroy the list. Signed-off-by: NJiufei Xue <xuejiufei@huawei.com> Reviewed-by: NJoseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 xuejiufei 提交于
We have found that migration source will trigger a BUG that the refcount of mle is already zero before put when the target is down during migration. The situation is as follows: dlm_migrate_lockres dlm_add_migration_mle dlm_mark_lockres_migrating dlm_get_mle_inuse <<<<<< Now the refcount of the mle is 2. dlm_send_one_lockres and wait for the target to become the new master. <<<<<< o2hb detect the target down and clean the migration mle. Now the refcount is 1. dlm_migrate_lockres woken, and put the mle twice when found the target goes down which trigger the BUG with the following message: "ERROR: bad mle: ". Signed-off-by: NJiufei Xue <xuejiufei@huawei.com> Reviewed-by: NJoseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Goldwyn Rodrigues 提交于
DLM does not cache locks. So, blocking lock and unlock will only make the performance worse where contention over the locks is high. Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 jiangyiwen 提交于
The following case will lead to slot overwritten. N1 N2 mount ocfs2 volume, find and allocate slot 0, then set osb->slot_num to 0, begin to write slot info to disk mount ocfs2 volume, wait for super lock write block fail because of storage link down, unlock super lock got super lock and also allocate slot 0 then unlock super lock mount fail and then dismount, since osb->slot_num is 0, try to put invalid slot to disk. And it will succeed if storage link restores. N2 slot info is now overwritten Once another node say N3 mount, it will find and allocate slot 0 again, which will lead to mount hung because journal has already been locked by N2. so when write slot info failed, invalidate slot in advance to avoid overwrite slot. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NYiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: NJoseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Xue jiufei 提交于
dlm_grab() may return NULL when the node is doing unmount. When doing code review, we found that some dlm handlers may return error to caller when dlm_grab() returns NULL and make caller BUG or other problems. Here is an example: Node 1 Node 2 receives migration message from node 3, and send migrate request to others start unmounting receives migrate request from node 1 and call dlm_migrate_request_handler() unmount thread unregisters domain handlers and removes dlm_context from dlm_domains dlm_migrate_request_handlers() returns -EINVAL to node 1 Exit migration neither clearing the migration state nor sending assert master message to node 3 which cause node 3 hung. Signed-off-by: NJiufei Xue <xuejiufei@huawei.com> Reviewed-by: NJoseph Qi <joseph.qi@huawei.com> Reviewed-by: NYiwen Jiang <jiangyiwen@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joseph Qi 提交于
Since iput will take care the NULL check itself, NULL check before calling it is redundant. So clean them up. Signed-off-by: NJoseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 jiangyiwen 提交于
Commit f3f85464 ("ocfs2_dlm: Ensure correct ordering of set/clear refmap bit on lockres") still exists a race which can't ensure the ordering is exactly correct. Node1 Node2 Node3 umount, migrate lockres to Node2 migrate finished, send migrate request to Node3 received migrate request, create a migration_mle, respond to Node2. set DLM_LOCK_RES_SETREF_INPROG and send assert master to Node3 delete migration_mle in assert_master_handler, Node3 umount without response dlm_thread purge this lockres, send drop deref message to Node2 found the flag of DLM_LOCK_RES_SETREF_INPROG is set, dispatch dlm_deref_lockres_worker to clear refmap, but in function of dlm_deref_lockres_worker, only if node in refmap it wait DLM_LOCK_RES_SETREF_INPROG to be cleared. So worker is done successfully purge lockres, send assert master response to Node1, and finish umount set Node3 in refmap, and it won't be cleared forever, thus lead to umount hung so wait until DLM_LOCK_RES_SETREF_INPROG is cleared in dlm_deref_lockres_worker. Signed-off-by: NYiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: NJoseph Qi <joseph.qi@huawei.com> Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Julia Lawall 提交于
The ocfs2_extent_tree_operations structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Xue jiufei 提交于
We found a race between purge and migration when doing code review. Node A put lockres to purgelist before receiving the migrate message from node B which is the master. Node A call dlm_mig_lockres_handler to handle this message. dlm_mig_lockres_handler dlm_lookup_lockres >>>>>> race window, dlm_run_purge_list may run and send deref message to master, waiting the response spin_lock(&res->spinlock); res->state |= DLM_LOCK_RES_MIGRATING; spin_unlock(&res->spinlock); dlm_mig_lockres_handler returns >>>>>> dlm_thread receives the response from master for the deref message and triggers the BUG because the lockres has the state DLM_LOCK_RES_MIGRATING with the following message: dlm_purge_lockres:209 ERROR: 6633EB681FA7474A9C280A4E1A836F0F: res M0000000000000000030c0300000000 in use after deref Signed-off-by: NJiufei Xue <xuejiufei@huawei.com> Reviewed-by: NJoseph Qi <joseph.qi@huawei.com> Reviewed-by: NYiwen Jiang <jiangyiwen@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Junxiao Bi 提交于
When run multiple xattr test of ocfs2-test on a three-nodes cluster, mount failed sometimes with the following message. o2hb: Unable to stabilize heartbeart on region D18B775E758D4D80837E8CF3D086AD4A (xvdb) Stabilize heartbeat depends on the timing order to mount ocfs2 from cluster nodes and how fast the tcp connections are established. So increase unsteady interations to leave more time for it. Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 John Haxby 提交于
Some versions of tar assume that files with st_blocks == 0 do not contain any data and will skip reading them entirely. See also commit 9206c561 ("ext4: return non-zero st_blocks for inline data"). Signed-off-by: NJohn Haxby <john.haxby@oracle.com> Reviewed-by: NMark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Acked-by: NGang He <ghe@suse.com> Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Norton.Zhu 提交于
In ocfs2_parse_options, a) it's better to declare variables(small size) outside of while loop; b) 'option' will be set by match_int, 'option = 0;' makes no sense, if match_int failed, it just goto bail and return. Signed-off-by: NNorton.Zhu <norton.zhu@huawei.com> Reviewed-by: NJoseph Qi <joseph.qi@huawei.com> Cc: Gang He <ghe@suse.com> Cc: Mark Fasheh <mfasheh@suse.de> Acked-by: NJoel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arnd Bergmann 提交于
Fix build errors that happen when CONFIG_LOGFS=y and CONFIG_MTD=m: fs/built-in.o: In function `logfs_mount': super.c:(.text+0x92a6f): undefined reference to `logfs_get_sb_mtd' fs/built-in.o: In function `logfs_get_sb_bdev': (.text+0x93530): undefined reference to `logfs_get_sb_mtd' This patch avoids the error by changing the dependencies of logfs in a way that we can no longer configure logfs as built-in when the MTD core is a loadable module, while leaving the dependency to require at least one of MTD or BLOCK to be enabled. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Peter Chen <peter.chen@freescale.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Javier Martinez Canillas 提交于
Commit ac551828 ("modpost: i2c aliases need no trailing wildcard") removed the wildcard at the end of the I2C module aliases because I2C devices have no IDs so the aliases are just arbitrary device names. This is also true for OF modaliases since a compatible string is used to define a specific IP hardware block. So the modalias should match a specific compatible string and not attempt to match a compatible string whose name matches the beginning of another one. For example, the following driver module: $ modinfo cros_ec_keyb | grep alias alias: platform:cros-ec-keyb alias: of:N*T*Cgoogle,cros-ec-keyb* will be tried to be loaded for an alias of:N*T*Cgoogle,cros-ec-keyb-v2 but there could be a different driver that supports the device for that compatible string so it's better to remove the trailing wildcard for OF. Also, remove the word "always" from the add_wildcard() function comment since that was carried from the time where a wildcard was always added at the end of the module alias for all the devices. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Suggested-by: NBrian Norris <computersforpeace@gmail.com> Reviewed-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Layton 提交于
At the time that this code was originally written, call_srcu didn't exist, so this thread was required to ensure that we waited for that SRCU grace period to settle before finally freeing the object. It does exist now however and we can much more efficiently use call_srcu to handle this. That also allows us to potentially use srcu_barrier to ensure that they are all of the callbacks have run before proceeding. In order to conserve space, we union the rcu_head with the g_list. This will be necessary for nfsd which will allocate marks from a dedicated slabcache. We have to be able to ensure that all of the objects are destroyed before destroying the cache. That's fairly Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Cc: Eric Paris <eparis@parisplace.org> Reviewed-by: NJan Kara <jack@suse.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geliang Tang 提交于
To make the intention clearer, use list_next_entry instead of list_entry. Signed-off-by: NGeliang Tang <geliangtang@163.com> Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sergey Senozhatsky 提交于
In Python3+ print is a function so the old syntax is not correct anymore: $ ./scripts/bloat-o-meter vmlinux.o vmlinux.o.old File "./scripts/bloat-o-meter", line 61 print "add/remove: %s/%s grow/shrink: %s/%s up/down: %s/%s (%s)" % \ ^ SyntaxError: invalid syntax Fix by calling print as a function. Tested on python 2.7.11, 3.5.1 Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Laura Abbott 提交于
In include/asm-generic/sections.h: /* * Usage guidelines: * _text, _data: architecture specific, don't use them in * arch-independent code * [_stext, _etext]: contains .text.* sections, may also contain * .rodata.* * and/or .init.* sections _text is not guaranteed across architectures. Architectures such as ARM may reuse parts which are not actually text and erroneously trigger a bug. Switch to using _stext which is guaranteed to contain text sections. Came out of https://lkml.kernel.org/g/<567B1176.4000106@redhat.com> Signed-off-by: NLaura Abbott <labbott@fedoraproject.org> Reviewed-by: NKees Cook <keescook@chromium.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sudip Mukherjee 提交于
The build of m32104ut_defconfig for m32r arch was failing for long long time with the error: ERROR: "memory_start" [fs/udf/udf.ko] undefined! ERROR: "memory_end" [fs/udf/udf.ko] undefined! ERROR: "memory_end" [drivers/scsi/sg.ko] undefined! ERROR: "memory_start" [drivers/scsi/sg.ko] undefined! ERROR: "memory_end" [drivers/i2c/i2c-dev.ko] undefined! ERROR: "memory_start" [drivers/i2c/i2c-dev.ko] undefined! As done in other architectures export the symbols to fix the error. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 1月, 2016 13 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs由 Linus Torvalds 提交于
Pull xfs updates from Dave Chinner: "There's not a lot in this - the main addition is the CRC validation of the entire region of the log that the will be recovered, along with several log recovery fixes. Most of the rest is small bug fixes and cleanups. I have three bug fixes still pending, all that address recently fixed regressions that I will send to next week after they've had some time in for-next. Summary: - extensive CRC validation during log recovery - several log recovery bug fixes - Various DAX support fixes - AGFL size calculation fix - various cleanups in preparation for new functionality - project quota ENOSPC notification via netlink - tracing and debug improvements" * tag 'xfs-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (26 commits) xfs: handle dquot buffer readahead in log recovery correctly xfs: inode recovery readahead can race with inode buffer creation xfs: eliminate committed arg from xfs_bmap_finish xfs: bmapbt checking on debug kernels too expensive xfs: add tracepoints to readpage calls xfs: debug mode log record crc error injection xfs: detect and trim torn writes during log recovery xfs: fix recursive splice read locking with DAX xfs: Don't use reserved blocks for data blocks with DAX XFS: Use a signed return type for suffix_kstrtoint() libxfs: refactor short btree block verification libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct libxfs: use a convenience variable instead of open-coding the fork xfs: fix log ticket type printing libxfs: make xfs_alloc_fix_freelist non-static xfs: make xfs_buf_ioend_async() static xfs: send warning of project quota to userspace via netlink xfs: get mp from bma->ip in xfs_bmap code xfs: print name of verifier if it fails libxfs: Optimize the loop for xfs_bitmap_empty ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs由 Linus Torvalds 提交于
Pull f2fs updates from Jaegeuk Kim: "This series adds two ioctls to control cached data and fragmented files. Most of the rest fixes missing error cases and bugs that we have not covered so far. Summary: Enhancements: - support an ioctl to execute online file defragmentation - support an ioctl to flush cached data - speed up shrinking of extent_cache entries - handle broken superblock - refector dirty inode management infra - revisit f2fs_map_blocks to handle more cases - reduce global lock coverage - add detecting user's idle time Major bug fixes: - fix data race condition on cached nat entries - fix error cases of volatile and atomic writes" * tag 'for-f2fs-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (87 commits) f2fs: should unset atomic flag after successful commit f2fs: fix wrong memory condition check f2fs: monitor the number of background checkpoint f2fs: detect idle time depending on user behavior f2fs: introduce time and interval facility f2fs: skip releasing nodes in chindless extent tree f2fs: use atomic type for node count in extent tree f2fs: recognize encrypted data in f2fs_fiemap f2fs: clean up f2fs_balance_fs f2fs: remove redundant calls f2fs: avoid unnecessary f2fs_balance_fs calls f2fs: check the page status filled from disk f2fs: introduce __get_node_page to reuse common code f2fs: check node id earily when readaheading node page f2fs: read isize while holding i_mutex in fiemap Revert "f2fs: check the node block address of newly allocated nid" f2fs: cover more area with nat_tree_lock f2fs: introduce max_file_blocks in sbi f2fs crypto: check CONFIG_F2FS_FS_XATTR for encrypted symlink f2fs: introduce zombie list for fast shrinking extent trees ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull first round of SCSI updates from James Bottomley: "This includes driver updates from the usual suspects (bfa, arcmsr, scsi_dh_alua, lpfc, storvsc, cxlflash). The major change is the addition of the hisi_sas driver, which is an ARM platform device for SAS. The other change of note is an enormous style transformation to the atp870u driver (which is our worst written SCSI driver)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (169 commits) cxlflash: Enable device id for future IBM CXL adapter cxlflash: Resolve oops in wait_port_offline cxlflash: Fix to resolve cmd leak after host reset cxlflash: Removed driver date print cxlflash: Fix to avoid virtual LUN failover failure cxlflash: Fix to escalate LINK_RESET also on port 1 storvsc: Tighten up the interrupt path storvsc: Refactor the code in storvsc_channel_init() storvsc: Properly support Fibre Channel devices storvsc: Fix a bug in the layout of the hv_fc_wwn_packet mvsas: Add SGPIO support to Marvell 94xx mpt3sas: A correction in unmap_resources hpsa: Add box and bay information for enclosure devices hpsa: Change SAS transport devices to bus 0. hpsa: fix path_info_show cciss: print max outstanding commands as a hex value scsi_debug: Increase the reported optimal transfer length lpfc: Update version to 11.0.0.10 for upstream patch set lpfc: Use kzalloc instead of kmalloc lpfc: Delete unnecessary checks before the function call "mempool_destroy" ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm updates from Dan Williams: "The bulk of this has appeared in -next and independently received a build success notification from the kbuild robot. The 'for-4.5/block- dax' topic branch was rebased over the weekend to drop the "block device end-of-life" rework that Al would like to see re-implemented with a notifier, and to address bug reports against the badblocks integration. There is pending feedback against "libnvdimm: Add a poison list and export badblocks" received last week. Linda identified some localized fixups that we will handle incrementally. Summary: - Media error handling: The 'badblocks' implementation that originated in md-raid is up-levelled to a generic capability of a block device. This initial implementation is limited to being consulted in the pmem block-i/o path. Later, 'badblocks' will be consulted when creating dax mappings. - Raw block device dax: For virtualization and other cases that want large contiguous mappings of persistent memory, add the capability to dax-mmap a block device directly. - Increased /dev/mem restrictions: Add an option to treat all io-memory as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access while a driver is actively using an address range. This behavior is controlled via the new CONFIG_IO_STRICT_DEVMEM option and can be overridden by the existing "iomem=relaxed" kernel command line option. - Miscellaneous fixes include a 'pfn'-device huge page alignment fix, block device shutdown crash fix, and other small libnvdimm fixes" * tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (32 commits) block: kill disk_{check|set|clear|alloc}_badblocks libnvdimm, pmem: nvdimm_read_bytes() badblocks support pmem, dax: disable dax in the presence of bad blocks pmem: fail io-requests to known bad blocks libnvdimm: convert to statically allocated badblocks libnvdimm: don't fail init for full badblocks list block, badblocks: introduce devm_init_badblocks block: clarify badblocks lifetime badblocks: rename badblocks_free to badblocks_exit libnvdimm, pmem: move definition of nvdimm_namespace_add_poison to nd.h libnvdimm: Add a poison list and export badblocks nfit_test: Enable DSMs for all test NFITs md: convert to use the generic badblocks code block: Add badblock management for gendisks badblocks: Add core badblock management code block: fix del_gendisk() vs blkdev_ioctl crash block: enable dax for raw block devices block: introduce bdev_file_inode() restrict /dev/mem to idle io memory ranges arch: consolidate CONFIG_STRICT_DEVM in lib/Kconfig.debug ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 updates from Martin Schwidefsky: "Among the traditional bug fixes and cleanups are some improvements: - A tool to generated the facility lists, generating the bit fields by hand has been a source of bugs in the past - The spinlock loop is reordered to avoid bursts of hypervisor calls - Add support for the open-for-business interface to the service element - The get_cpu call is added to the vdso - A set of tracepoints is defined for the common I/O layer - The deprecated sclp_cpi module is removed - Update default configuration" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (56 commits) s390/sclp: fix possible control register corruption s390: fix normalization bug in exception table sorting s390/configs: update default configurations s390/vdso: optimize getcpu system call s390: drop smp_mb in vdso_init s390: rename struct _lowcore to struct lowcore s390/mem_detect: use unsigned longs s390/ptrace: get rid of long longs in psw_bits s390/sysinfo: add missing SYSIB 1.2.2 multithreading fields s390: get rid of CONFIG_SCHED_MC and CONFIG_SCHED_BOOK s390/Kconfig: remove pointless 64 bit dependencies s390/dasd: fix failfast for disconnected devices s390/con3270: testing return kzalloc retval s390/hmcdrv: constify hmcdrv_ftp_ops structs s390/cio: add NULL test s390/cio: Change I/O instructions from inline to normal functions s390/cio: Introduce common I/O layer tracepoints s390/cio: Consolidate inline assemblies and related data definitions s390/cio: Fix incorrect xsch opcode specification s390/cio: Remove unused inline assemblies ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux由 Linus Torvalds 提交于
Pull ia64 build fixes from Tony Luck: "The ARM guys broke the ia64 build ... but gave me fixes, so it's all good now" * tag 'please-pull-fixefi' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: efi: include asm/early_ioremap.h not asm/efi.h to get early_memremap ia64: split off early_ioremap() declarations into asm/early_ioremap.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull second batch of media updates from Mauro Carvalho Chehab: "This is the second part of the media patches. It contains the media controller next generation patches, with is the result of one year of discussions and development. It also contains patches to enable media controller support at the DVB subsystem. The goal is to improve the media controller to allow proper support for other types of Video4Linux devices (radio and TV ones) and to extend the media controller functionality to allow it to be used by other subsystems like DVB, ALSA and IIO. In order to use the new functionality, a new ioctl is needed (MEDIA_IOC_G_TOPOLOGY). As we're still discussing how to pack the struct fields of this ioctl in order to avoid compat32 issues, I decided to add a patch at the end of this series commenting out the new ioctl, in order to postpone the addition of the new ioctl to the next Kernel version (4.6). With that, no userspace visible changes should happen at the media controller API, as the existing ioctls are untouched. Yet, it helps DVB, ALSA and IIO developers to develop and test the patches adding media controller support there, as the core will contain all required internal changes to allow adding support for devices that belong to those subsystems" * tag 'media/v4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (177 commits) [media] Postpone the addition of MEDIA_IOC_G_TOPOLOGY [media] mxl111sf: Add a tuner entity [media] dvbdev: create links on devices with multiple frontends [media] media-entitiy: add a function to create multiple links [media] dvb-usb-v2: postpone removal of media_device [media] dvbdev: Add RF connector if needed [media] dvbdev: remove two dead functions if !CONFIG_MEDIA_CONTROLLER_DVB [media] call media_device_init() before registering the V4L2 device [media] uapi/media.h: Use u32 for the number of graph objects [media] media-entity: don't sleep at media_device_register_entity() [media] media-entity: increase max number of PADs [media] media-entity.h: document the remaining functions [media] media-device.h: use just one u32 counter for object ID [media] media-entity.h fix documentation for several parameters [media] DocBook: document media_entity_graph_walk_cleanup() [media] move documentation to the header files [media] media: Move MEDIA_ENTITY_MAX_PADS from media-entity.h to media-entity.c [media] media: Remove pre-allocated entity enumeration bitmap [media] staging: v4l: davinci_vpbe: Use the new media graph walk interface [media] staging: v4l: omap4iss: Use the new media graph walk interface ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi由 Linus Torvalds 提交于
Pull spi updates from Mark Brown: "A quiet release for SPI, not even many driver updates: - Add a dummy loopback driver for use in exercising framework features during development. - Move the test utilities to tools/ and add support for transferring data to and from a file instead of stdin and stdout to spidev_test. - Support for Mediatek MT2701 and Renesas AG5 deices" * tag 'spi-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (69 commits) spi: loopback: fix typo in MODULE_PARM_DESC spi: sun4i: Prevent chip-select from being activated twice before a transfer spi: loopback-test: spi_check_rx_ranges can get always done spi: loopback-test: rename method spi_test_fill_tx to spi_test_fill_pattern spi: loopback-test: write rx pattern also when running without tx_buf spi: fsl-espi: expose maximum transfer size limit spi: expose master transfer size limitation. spi: zynq: use to_platform_device() spi: cadence: use to_platform_device() spi: mediatek: Add spi support for mt2701 IC spi: mediatek: merge all identical compat to mtk_common_compat spi: mtk: Add bindings for mediatek MT2701 soc platform spi: mediatek: Prevent overflows in FIFO transfers spi: s3c64xx: Remove unused platform_device_id entries spi: use to_spi_device spi: dw: Use SPI_TMOD_TR rather than magic const 0 to set tmode spi: imx: defer spi initialization, if DMA engine is spi: imx: return error from dma channel request spi: imx: enable loopback only for ECSPI controller family spi: imx: fix loopback mode setup after controller reset ...
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD updates from Brian Norris: "Generic MTD: - populate the MTD device 'of_node' field (and get a proper 'of_node' symlink in sysfs) This yielded some new helper functions, and changes across a variety of drivers - partitioning cleanups, to prepare for better device-tree based partitioning in the future Eliminate a lot of boilerplate for drivers that want to use OF-based partition parsing The DT bindings for this didn't settle yet, so most non-cleanup portions are deferred for a future release NAND: - embed a struct mtd_info inside struct nand_chip This is really long overdue; too many drivers have to do the same silly boilerplate to allocate and link up two "independent" structs, when in fact, everyone is assuming there is an exact 1:1 relationship between a NAND chips struct and its underlying MTD. This aids improved helpers and should make certain abstractions easier in the future. Also causes a lot of churn, helped along by some automated code transformations - add more core support for detecting (and "correcting") bitflips in erased pages; requires opt-in by drivers, but at least we kill a few bad implementations and hopefully stave off future ones - pxa3xx_nand: cleanups, a few fixes, and PM improvements - new JZ4780 NAND driver SPI NOR: - provide default erase function, for controllers that just want to send the SECTOR_ERASE command directly - fix some module auto-loading issues with device tree ("jedec,spi-nor") - error handling fixes - new Mediatek QSPI flash driver Other: - cfi: force valid geometry Kconfig (finally!) This one used to trip up randconfigs occasionally, since bots aren't deterred by big scary "advanced configuration" menus More? Probably. See the commit logs" * tag 'for-linus-20160112' of git://git.infradead.org/linux-mtd: (168 commits) mtd: jz4780_nand: replace if/else blocks with switch/case mtd: nand: jz4780: Update ecc correction error codes mtd: nandsim: use nand_get_controller_data() mtd: jz4780_nand: remove useless mtd->priv = chip assignment staging: mt29f_spinand: make use of nand_set/get_controller_data() helpers mtd: nand: make use of nand_set/get_controller_data() helpers ARM: make use of nand_set/get_controller_data() helpers mtd: nand: add helpers to access ->priv mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs mtd: nand: jz4740: remove custom 'erased check' implementation mtd: nand: diskonchip: remove custom 'erased check' implementation mtd: nand: davinci: remove custom 'erased check' implementation mtd: nand: use nand_check_erased_ecc_chunk in default ECC read functions mtd: nand: return consistent error codes in ecc.correct() implementations doc: dt: mtd: new binding for jz4780-{nand,bch} mtd: cfi_cmdset_0001: fixing memory leak and handling failed kmalloc mtd: spi-nor: wait until lock/unlock operations are ready mtd: tests: consolidate kmalloc/memset 0 call to kzalloc jffs2: use to_delayed_work mtd: nand: assign reasonable default name for NAND drivers ...
-
git://git.code.sf.net/p/openipmi/linux-ipmi由 Linus Torvalds 提交于
Pull ipmi updates from Corey Minyard: "Some minor changes that have been in linux-next for a while" * tag 'for-linus-4.5' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: Remove unnecessary pci_disable_device. char: ipmi: Drop owner assignment from i2c_driver ipmi: constify some struct and char arrays
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input updates from Dmitry Torokhov: - new driver for eGalaxTouch serial touchscreen - new driver for TS-4800 touchscreen - an update for Goodix touchscreen driver - PS/2 mouse module was reworked to limit number of protocols we try on pass-through ports to speed up their detection time - wacom_w8001 touchscreen driver now reports pen and touch via separate instances of input devices - other driver changes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (42 commits) Input: elantech - mark protocols v2 and v3 as semi-mt Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPE Input: gpio-keys - fix check for disabling unsupported keys Input: omap-keypad - remove dead check Input: ti_am335x_tsc - fix HWPEN interrupt handling Input: omap-keypad - set tasklet data earlier Input: rohm_bu21023 - fix handling of retrying firmware update Input: ALPS - report v3 pinnacle trackstick device only if is present Input: ALPS - detect trackstick presence for v7 protocol Input: pcap_ts - use to_delayed_work Input: bma150 - constify bma150_cfg structure Input: i8042 - add Fujitsu Lifebook U745 to the nomux list Input: egalax_ts_serial - fix potential NULL dereference on error Input: uinput - sanity check on ff_effects_max and EV_FF Input: uinput - rework ABS validation Input: uinput - add new UINPUT_DEV_SETUP and UI_ABS_SETUP ioctl Input: goodix - use "inverted_[xy]" flags instead of "rotated_screen" Input: goodix - add axis swapping and axis inversion support Input: goodix - use goodix_i2c_write_u8 instead of i2c_master_send Input: goodix - add power management support ...
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull dmaengine updates from Vinod Koul: "This round we have few new features, new driver and updates to few drivers. The new features to dmaengine core are: - Synchronized transfer termination API to terminate the dmaengine transfers in synchronized and async fashion as required by users. We have its user now in ALSA dmaengine lib, img, at_xdma, axi_dmac drivers. - Universal API for channel request and start consolidation of request flows. It's user is ompa-dma driver. - Introduce reuse of descriptors and use in pxa_dma driver Add/Remove: - New STM32 DMA driver - Removal of unused R-Car HPB-DMAC driver Updates: - ti-dma-crossbar updates for supporting eDMA - tegra-apb pm updates - idma64 - mv_xor updates - ste_dma updates" * tag 'dmaengine-4.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (54 commits) dmaengine: mv_xor: add suspend/resume support dmaengine: mv_xor: de-duplicate mv_chan_set_mode*() dmaengine: mv_xor: remove mv_xor_chan->current_type field dmaengine: omap-dma: Add support for DMA filter mapping to slave devices dmaengine: edma: Add support for DMA filter mapping to slave devices dmaengine: core: Introduce new, universal API to request a channel dmaengine: core: Move and merge the code paths using private_candidate dmaengine: core: Skip mask matching when it is not provided to private_candidate dmaengine: mdc: Correct terminate_all handling dmaengine: edma: Add probe callback to edma_tptc_driver dmaengine: dw: fix potential memory leak in dw_dma_parse_dt() dmaengine: stm32-dma: Fix unchecked deference of chan->desc dmaengine: sh: Remove unused R-Car HPB-DMAC driver dmaengine: usb-dmac: Document SoC specific compatibility strings ste_dma40: Delete an unnecessary variable initialisation in d40_probe() ste_dma40: Delete another unnecessary check in d40_probe() ste_dma40: Delete an unnecessary check before the function call "kmem_cache_destroy" dmaengine: tegra-apb: Free interrupts before killing tasklets dmaengine: tegra-apb: Update driver to use GFP_NOWAIT dmaengine: tegra-apb: Only save channel state for those in use ...
-
由 Ard Biesheuvel 提交于
The code in efi.c uses early_memremap(), but relies on a transitive include rather than including asm/early_ioremap.h directly, since this header did not exist on ia64. Commit f7d92489 ("arm64/efi: refactor EFI init and runtime code for reuse by 32-bit ARM") attempted to work around this by including asm/efi.h, which transitively includes asm/early_ioremap.h on most architectures. However, since asm/efi.h does not exist on ia64 either, this is not much of an improvement. Now that we have created an asm/early_ioremap.h for ia64, we can just include it directly. Reported-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NTony Luck <tony.luck@intel.com>
-