- 14 8月, 2013 3 次提交
-
-
由 Yijing Wang 提交于
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device drivers should use pci_dev->msi_cap/msix_cap to determine whether a device supports MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: NYijing Wang <wangyijing@huawei.com> Acked-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Paul Bolle 提交于
struct pci_driver qib_driver is only used in qib_init.c. Remove it from qib.h and make it static in qib_init.c. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 CQ Tang 提交于
1. The code accepts chunks of messages, and splits the chunk into packets when converting packets into sdma queue entries. Adjacent packets will use user buffer pages smartly to avoid pinning the same page multiple times. 2. Instead of discarding all the work when SDMA queue is full, the work is saved in a pending queue. Whenever there are enough SDMA queue free entries, pending queue is directly put onto SDMA queue. 3. An interrupt handler is used to progress this pending queue. Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NCQ Tang <cq.tang@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> [ Fixed up sparse warnings. - Roland ] Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 31 7月, 2013 1 次提交
-
-
由 Mike Marciniszyn 提交于
Commit 0b3ddf38 ("Log all SDMA errors unconditionally") missed part of the patch. This also corrects a format warning when dma_addr_t is 32 bits on a 64 bit system. Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 12 7月, 2013 2 次提交
-
-
由 Dean Luick 提交于
This patch adds code to log SDMA errors for supportability purposes. Signed-off-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Mike Marciniszyn 提交于
The vzalloc()'ed field physshadow is leaked on module unload. This patch adds vfree after the sibling page shadow is freed. Reported-by: NDean Luick <dean.luick@intel.com> Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 04 7月, 2013 1 次提交
-
-
由 Kees Cook 提交于
Calling dev_set_name with a single paramter causes it to be handled as a format string. Many callers are passing potentially dynamic string content, so use "%s" in those cases to avoid any potential accidents, including wrappers like device_create*() and bdi_register(). Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 6月, 2013 1 次提交
-
-
由 Mitko Haralanov 提交于
The Dell blade chassis got an updated backplane which requires new transmitter tuning settings. Signed-off-by: NMitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 22 6月, 2013 9 次提交
-
-
由 Mike Marciniszyn 提交于
This adds a seq_file iterator for reporting the QP hash table when the qp_stats file is read. Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Mike Marciniszyn 提交于
This patch adds a debugfs stats interface for per kernel contexts packet counts. The code uses the opcode stats count and eliminates the counter in the context. Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Mike Marciniszyn 提交于
This fix changes the opcode relative counters for receive to per context. Profiling has shown that when mulitple contexts are being used there is a lot of cache activity associated with these counters. The code formerly kept these counters per port, but only provided the interface to read per HCA. This patch converts the read of counters to per HCA and adds the debugfs hooks to be able to read the file as a sequence of opcodes. Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Mike Marciniszyn 提交于
The current workqueue implemention has the following performance deficiencies on QDR HCAs: - The CQ call backs tend to run on the CPUs processing the receive queues - The single thread queue isn't optimal for multiple HCAs This patch adds a dedicated per HCA bound thread to process CQ callbacks. Reviewed-by: NRamkrishna Vepa <ramkrishna.vepa@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Ramkrishna Vepa 提交于
The driver currently selects a HCA based on the algorithm that PSM chooses, contexts within a HCA or across. The HCA can also be chosen by the user. Either way, this patch assigns a CPU on the NUMA node local to the selected HCA. This patch also tries to select the HCA closest to the NUMA node of the CPU assigned via taskset to PSM process. If this HCA is unusable then another unit is selected based on the algorithm that is currently enforced or selected by PSM - round robin context selection 'within' or 'across' HCA's. Fixed a bug wherein contexts are setup on the NUMA node on which the processes are opened (setup_ctxt()) and not on the NUMA node that the driver recommends the CPU on. Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NVinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: NRamkrishna Vepa <ramkrishna.vepa@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Ramkrishna Vepa 提交于
This patch adds context relative numa affinity conditioned on the module parameter numa_aware. The qib_ctxtdata has an additional node_id member and qib_create_ctxtdata() has an addition node_id parameter. The allocations within the hdr queue and eager queue setup routines now take this additional member and adjust allocations as necesary. PSM will pass the either current numa node or the node closest to the HCA depending on numa_aware. Verbs will always use the node closest to the HCA. Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NRamkrishna Vepa <ramkrishna.vepa@intel.com> Signed-off-by: NVinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Vinit Agnihotri 提交于
External PSM repositories have advanced the minor number for a variety of reasons. The driver needs to increase to avoid warnings. Signed-off-by: NVinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Mike Marciniszyn 提交于
Follow Documentation/RCU/rcuref.txt guidance in removing atomic_inc_not_zero() from QP RCU implementation. This patch also removes an unneeded synchronize_rcu() in the add path. Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Mike Marciniszyn 提交于
This patch adds DCA cache warming for systems that support DCA. The code uses cpu affinity notification to react to an affinity change from a user mode program like irqbalance and (re-)program the chip accordingly. This notification avoids reading the current cpu on every interrupt. Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> [ Add Kconfig dependency on SMP && GENERIC_HARDIRQS to avoid failure to build due to undefined struct irq_affinity_notify. - Roland ] Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 05 6月, 2013 1 次提交
-
-
由 Mike Marciniszyn 提交于
The following backtrace is reported with CONFIG_PROVE_RCU: drivers/infiniband/hw/qib/qib_keys.c:64 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 4 locks held by kworker/0:1/56: #0: (events){.+.+.+}, at: [<ffffffff8107a4f5>] process_one_work+0x165/0x4a0 #1: ((&wfc.work)){+.+.+.}, at: [<ffffffff8107a4f5>] process_one_work+0x165/0x4a0 #2: (device_mutex){+.+.+.}, at: [<ffffffffa0148dd8>] ib_register_device+0x38/0x220 [ib_core] #3: (&(&dev->lk_table.lock)->rlock){......}, at: [<ffffffffa017e81c>] qib_alloc_lkey+0x3c/0x1b0 [ib_qib] stack backtrace: Pid: 56, comm: kworker/0:1 Not tainted 3.10.0-rc1+ #6 Call Trace: [<ffffffff810c0b85>] lockdep_rcu_suspicious+0xe5/0x130 [<ffffffffa017e8e1>] qib_alloc_lkey+0x101/0x1b0 [ib_qib] [<ffffffffa0184886>] qib_get_dma_mr+0xa6/0xd0 [ib_qib] [<ffffffffa01461aa>] ib_get_dma_mr+0x1a/0x50 [ib_core] [<ffffffffa01678dc>] ib_mad_port_open+0x12c/0x390 [ib_mad] [<ffffffff810c2c55>] ? trace_hardirqs_on_caller+0x105/0x190 [<ffffffffa0167b92>] ib_mad_init_device+0x52/0x110 [ib_mad] [<ffffffffa01917c0>] ? sl2vl_attr_show+0x30/0x30 [ib_qib] [<ffffffffa0148f49>] ib_register_device+0x1a9/0x220 [ib_core] [<ffffffffa01b1685>] qib_register_ib_device+0x735/0xa40 [ib_qib] [<ffffffff8106ba98>] ? mod_timer+0x118/0x220 [<ffffffffa017d425>] qib_init_one+0x1e5/0x400 [ib_qib] [<ffffffff812ce86e>] local_pci_probe+0x4e/0x90 [<ffffffff81078118>] work_for_cpu_fn+0x18/0x30 [<ffffffff8107a566>] process_one_work+0x1d6/0x4a0 [<ffffffff8107a4f5>] ? process_one_work+0x165/0x4a0 [<ffffffff8107c9c9>] worker_thread+0x119/0x370 [<ffffffff8107c8b0>] ? manage_workers+0x180/0x180 [<ffffffff8108294e>] kthread+0xee/0x100 [<ffffffff81082860>] ? __init_kthread_worker+0x70/0x70 [<ffffffff815c04ac>] ret_from_fork+0x7c/0xb0 [<ffffffff81082860>] ? __init_kthread_worker+0x70/0x70 Per Documentation/RCU/lockdep-splat.txt, the code now uses rcu_access_pointer() vs. rcu_dereference(). Reported-by: NJay Fenlason <fenlason@redhat.com> Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 08 5月, 2013 1 次提交
-
-
由 Kent Overstreet 提交于
Faster kernel compiles by way of fewer unnecessary includes. [akpm@linux-foundation.org: fix fallout] [akpm@linux-foundation.org: fix build] Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 4月, 2013 1 次提交
-
-
由 Mike Marciniszyn 提交于
qib_verbs_register_sysfs() never cleans up from a failure. Additionally, the caller of qib_verbs_register_sysfs() doesn't return the correct "ret" value. This patch resolves both of those issues. Reported-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 06 4月, 2013 1 次提交
-
-
由 Mike Marciniszyn 提交于
Commit e2eed58b ("IB/qib: change QLogic to Intel") moved a firmware file potentially breaking the ABI. This patch reverts that aspect of the fix as well as reverting the firmware name as used in qib. Reported-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 3月, 2013 1 次提交
-
-
由 Vinit Agnihotri 提交于
These changes modify the qib driver as part of acquiring the InfiniBand assets of QLogic. Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NVinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 04 3月, 2013 1 次提交
-
-
由 Eric W. Biederman 提交于
Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: NSerge Hallyn <serge.hallyn@canonical.com> Acked-by: NKees Cook <keescook@chromium.org> Reported-by: NKees Cook <keescook@google.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 28 2月, 2013 1 次提交
-
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Mike Marciniszyn <infinipath@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 2月, 2013 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 15 2月, 2013 1 次提交
-
-
由 Mike Marciniszyn 提交于
remove_qp() can execute concurrently with a qib_lookup_qpn() on another CPU, which in of itself, is ok, given the RCU locking. The issue is that remove_qp() NULLs out the qp->next field so that a qib_lookup_qpn() might fail to find a qp if it occurs after the one that is being deleted. This is a momentary issue and subsequent qib_lookup_qpn() calls would find the qp's since the search restarts from the bucket head. At scale, the issue might causes dropped packets and unnecessary retransmissions. The fix just deletes the qp->next NULL assignment to prevent the remove_qp() from hiding qp's from qib_lookup_qpn(). Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 06 2月, 2013 1 次提交
-
-
由 Mike Marciniszyn 提交于
Commit 1fb9fed6 ("IB/qib: Fix QP RCU sparse warning") broke QP hash list deletion in qp_remove() badly. This patch restores the former for loop behavior, while still fixing the sparse warnings. Cc: <stable@vger.kernel.org> Reviewed-by: NGary Leshner <gary.s.leshner@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 04 1月, 2013 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Tom Tucker <tom@opengridcomputing.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Cc: Christoph Raisch <raisch@de.ibm.com> Cc: Mike Marciniszyn <infinipath@intel.com> Cc: Faisal Latif <faisal.latif@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 09 10月, 2012 1 次提交
-
-
由 Konstantin Khlebnikov 提交于
A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA, currently it lost original meaning but still has some effects: | effect | alternative flags -+------------------------+--------------------------------------------- 1| account as reserved_vm | VM_IO 2| skip in core dump | VM_IO, VM_DONTDUMP 3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP 4| do not mlock | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP This patch removes reserved_vm counter from mm_struct. Seems like nobody cares about it, it does not exported into userspace directly, it only reduces total_vm showed in proc. Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP. remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP. remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP. [akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup] Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 10月, 2012 1 次提交
-
-
由 Mike Marciniszyn 提交于
Commit 8aac4cc3 ("IB/qib: RCU locking for MR validation") introduced a bug that broke user post sends. The proper validation of the MR was lost in the patch. This patch corrects that validation. Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 01 10月, 2012 1 次提交
-
-
由 Dean Luick 提交于
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 21 9月, 2012 1 次提交
-
-
由 Eric W. Biederman 提交于
Acked-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Acked-by: NSerge Hallyn <serge.hallyn@canonical.com> Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
-
- 15 9月, 2012 1 次提交
-
-
由 Mike Marciniszyn 提交于
Commit 3236b2d4 ("IB/qib: MADs with misset M_Keys should return failure") introduced a return code assignment that unfortunately introduced an unconditional exit for the routine due to missing braces. This patch adds the braces to correct the original patch. Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 08 9月, 2012 1 次提交
-
-
由 Stephen Hemminger 提交于
Covers the rest of the uses of pci error handler. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
- 24 8月, 2012 1 次提交
-
-
由 Jiang Liu 提交于
Use PCI Express Capability access functions to simplify qib driver. Signed-off-by: NJiang Liu <jiang.liu@huawei.com> Signed-off-by: NYijing Wang <wangyijing@huawei.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
-
- 16 8月, 2012 2 次提交
-
-
由 Julia Lawall 提交于
Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Acked-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Masanari Iida 提交于
Correct spelling typos in comments in drivers/infiniband. Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 30 7月, 2012 1 次提交
-
-
由 Mike Marciniszyn 提交于
Commit 36a8f01c ("IB/qib: Add congestion control agent implementation") tries to store the value 1984 in a u8, which leads to truncation. Fix this by making the member big enough. This bug was detected by a smatch warning. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NRamkrishna Vepa <ramkrishna.vepa@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 20 7月, 2012 2 次提交
-
-
由 Mike Marciniszyn 提交于
Elminate some simple_strto* usage. checkpatch also noted pr_ conversations, which have been done as recommended. The pr_fmt() define is used to shorten line length. Other multi-line string warnings are also elmininated. Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Mike Marciniszyn 提交于
Add a congestion control agent in the driver that handles gets and sets from the congestion control manager in the fabric for the Performance Scale Messaging (PSM) library. Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-