- 20 12月, 2005 2 次提交
-
-
由 Edson Seabra 提交于
The CPM2 interrupt handler does not return success to the IRQ subsystem, which causes it to kill the IRQ line after 100,000 interrupts. Signed-off-by: NEdson Seabra <Edson.Seabra@cyclades.com> Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
Since we don't restore the volatile registers in the syscall exit path, we need to make sure we don't leak any potentially interesting values from the kernel to userspace. This was already the case for all except r11. This makes it use r11 for an MSR value, so r11 will have an (uninteresting) MSR value in it on return to userspace. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 15 12月, 2005 23 次提交
-
-
由 Linus Torvalds 提交于
-
由 Jeff Mahoney 提交于
The following patch fixes a bug where if the journal is aborted, it can leave a transaction open. The result will be a BUG when another code path attempts to start a transaction and will get a "nesting into different fs" error, since current->journal_info will be left non-NULL. Original fix against SUSE kernel by Chris Mason <mason@suse.com> Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Mahoney 提交于
This should have been part of the original io error patch, but got dropped somewhere along the way. It's extremely important when handling the i/o error in the journal to not commit the transaction with corrupt data. This patch adds that code back in. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Vojtech Pavlik 提交于
Without this patch Forward and Backward buttons on the touchpad do not generate any events. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
Also, disable on sparc64 - a number of people report breakage. Probably a compiler bug, but it's quite possible that it tickles some latent kernel problem too. It still defaults to 'y' everywhere else (when enabled through EXPERIMENTAL), and Dave Jones points out that Fedora (and RHEL4) has been building with size optimizations for a long time on x86, x86-64, ia64, s390, s390x, ppc32 and ppc64. So it is really only moderately experimental, but the sparc64 breakage certainly shows that it can trigger "issues". Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Remove unused fields: ioctl, ata[pi]_prebuilder. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Remove: * stale comment * unused HOST() macro * unused ata_{error,control}_t types * unused atapi_select_t type * ide_init_subdrivers() prototype Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Jordan Crouse 提交于
Changes here include removing all of CONFIG_PM while it is being repeatedly smacked with a lead pipe, moving the BURSTMODE param to a #define (it should be defined almost always anyway), fixing the rqsize stuff, pulling ide_ioreg_t, and general cleanups and whatnot. Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Jordan Crouse 提交于
bart: slightly modified by me Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Marcelo Tosatti 提交于
The following patch adds a dependancy on IDE=y && BLK_DEV_IDE=y for the MPC8xx IDE driver. The code is not modular at the moment (init called from platform setup code). Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Daniel Drake 提交于
Some motherboards (such as the Asus P5V800-MX) ship a PCI_DEVICE_ID_VIA_82C586_1 IDE controller alongside a VT8251 southbridge. This southbridge is currently unrecognised in the via82cxxx IDE driver, preventing those users from getting DMA access to disks. Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Jeremy Higdon 提交于
Add a check to the sgiioc4 driver for the case where all available ide_hwifs structures are in use. Signed-off-by: NJeremy Higdon <jeremy@sgi.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Stephen Hemminger 提交于
Receiving VLAN packets over a device (without VLAN assist) that is doing hardware checksumming (CHECKSUM_HW), causes errors because the VLAN code forgets to adjust the hardware checksum. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Daniel Jacobowitz 提交于
Patch from Daniel Jacobowitz Handle new EABI relocations when loading kernel modules. This is necessary for CONFIG_AEABI kernels, and also for some broken (since fixed) old ABI toolchains. Signed-off-by: NDaniel Jacobowitz <dan@codesourcery.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Herbert Xu 提交于
The skb_postpull_rcsum introduced a bug to the checksum modification. Although the length pulled is offset bytes, the origin of the pulling is the GRE header, not the IP header. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robin Holt 提交于
Missed this when fixing the SET_PERSONALITY change. Signed-off-by: NRobin Holt <holt@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 14 12月, 2005 15 次提交
-
-
由 Russell King 提交于
It seems that people get confused about what is happening in mmc_power_up(). Add a comment to make it clear why we have a two stage process. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Torvalds 提交于
-
由 David S. Miller 提交于
Noticed by Andi Kleen. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Noticed by Andi Kleen, it is pointless to emit the device structure pointer in the kernel logs like this. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 James Bottomley 提交于
This follows on from Jens' patch and consolidates all of the ULD separate handlers for REQ_BLOCK_PC into a single call which has his fix for our direction bug. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Adam Kropelin 提交于
When it detects a truncated report, hid-core emits a warning and then processes the report as usual. This is good because it allows buggy devices to still get data thru to userspace. However, the missing bytes of the report should be cleared before processing, otherwise userspace will be handed partially-uninitialized data. This fixes Debian tracker bug #330487. Signed-off-by: NAdam Kropelin <akropel1@rochester.rr.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Acked-by: NDmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ole Reinhardt 提交于
pxafb.c runs into an oops if CONFIG_FB_PXA_PARAMETERS is enabled and no parameters are set in command line. The following patch avoids this problem. Signed-off-by: NNicolas Pitre <nico@cam.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Yasunori Goto 提交于
The calculation for node_spanned_pages at grow_pgdat_span() is clearly wrong. This is patch for it. (Please see grow_zone_span() to compare. It is correct.) Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com> Acked-by: NDave Hansen <haveblue@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Vojtech Pavlik 提交于
I haven't been very actively maintaining the input layer in past months, mostly because of my lack of time to concentrate on that. For that reason, I've decided to pass the maintainership of the Linux Input Layer to Dmitry Torokhov, whom I trust to do the job very well. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Chan 提交于
Fix the following bugs in tg3_set_power_state(): 1. Both WOL and ASF flags require switching to aux power. 2. Add a missing handshake with firmware to enable WOL. 3. Turn off the PHY if both WOL and ASF are disabled. 4. Add nvram arbitration before halting the firmware. 5. Fix tg3_setup_copper_phy() to switch to 100Mbps when changing to low power state. Update revision and date. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
If the dual-port 5704 is configured as a single-port device with only one PCI function, it would trigger a BUG() condition in tg3_find_5704_peer(). This fixes the problem by returning its own pdev if the peer cannot be found. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Fix tg3_suspend() and tg3_resume() by clearing and setting the TG3_FLAG_INIT_COMPLETE flag when appropriate. tg3_set_power_state() looks at TG3_FLAG_INIT_COMPLETE on the peer device to determine when to appropriately switch to aux power. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The nvram arbitration rules were not strictly followed in a few places and this could lead to reading corrupted values from the nvram. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matthew Wilcox 提交于
When we got a device only capable of async, we would zero out goal->period which would cause us to try PPR negotiations. Leave goal->period alone, and check goal->offset before doing PPR. Kudos to Daniel Forsgren for figuring this out. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-