In rare cases a virtio command might try to issue a ccw before a former
ccw was answered with a tsch. This will cause CC=2 (busy). Lets just
retry in that case.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Dynamically allocate any data structures like ccw used when
doing channel I/O. Otherwise, we'd need to add extra serialization
for the different callbacks using the same data structures.
Reported-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Opcodes:
	TEST
	CMP
	ADD
	ADC
	SUB
	SBB
	XOR
	OR
	AND
Acked-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi.kivity@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Acked-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi.kivity@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Acked-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi.kivity@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Acked-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi.kivity@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Instead of disabling writeback via OP_NONE, just specify NoWrite.
Acked-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi.kivity@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Acked-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi.kivity@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We emulate arithmetic opcodes by executing a "similar" (same operation,
different operands) on the cpu.  This ensures accurate emulation, esp. wrt.
eflags.  However, the prologue and epilogue around the opcode is fairly long,
consisting of a switch (for the operand size) and code to load and save the
operands.  This is repeated for every opcode.

This patch introduces an alternative way to emulate arithmetic opcodes.
Instead of the above, we have four (three on i386) functions consisting
of just the opcode and a ret; one for each operand size.  For example:

   .align 8
   em_notb:
	not %al
	ret

   .align 8
   em_notw:
	not %ax
	ret

   .align 8
   em_notl:
	not %eax
	ret

   .align 8
   em_notq:
	not %rax
	ret

The prologue and epilogue are shared across all opcodes.  Note the functions
use a special calling convention; notably eflags is an input/output parameter
and is not clobbered.  Rather than dispatching the four functions through a
jump table, the functions are declared as a constant size (8) so their address
can be calculated.
Acked-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi.kivity@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

CPL is always 0 when in real mode, and always 3 when virtual 8086 mode.

Using values other than those can cause failures on operations that
check CPL.
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Fix compilation warning.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

MMU code tries to avoid if()s HW is not able to predict reliably by using
bitwise operation to streamline code execution, but in case of a dirty bit
folding this gives us nothing since write_fault is checked right before
the folding code. Lets just piggyback onto the if() to make code more clear.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

trace_kvm_mmu_delay_free_pages() is no longer used.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Add a new capability, KVM_CAP_S390_CSS_SUPPORT, which will pass
intercepts for channel I/O instructions to userspace. Only I/O
instructions interacting with I/O interrupts need to be handled
in-kernel:

- TEST PENDING INTERRUPTION (tpi) dequeues and stores pending
  interrupts entirely in-kernel.
- TEST SUBCHANNEL (tsch) dequeues pending interrupts in-kernel
  and exits via KVM_EXIT_S390_TSCH to userspace for subchannel-
  related processing.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Make s390 support KVM_ENABLE_CAP.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Explicitely catch all channel I/O related instructions intercepts
in the kernel and set condition code 3 for them.

This paves the way for properly handling these instructions later
on.

Note: This is not architecture compliant (the previous code wasn't
either) since setting cc 3 is not the correct thing to do for some
of these instructions. For Linux guests, however, it still has the
intended effect of stopping css probing.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Add support for injecting machine checks (only repressible
conditions for now).

This is a bit more involved than I/O interrupts, for these reasons:

- Machine checks come in both floating and cpu varieties.
- We don't have a bit for machine checks enabling, but have to use
  a roundabout approach with trapping PSW changing instructions and
  watching for opened machine checks.
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Add support for handling I/O interrupts (standard, subchannel-related
ones and rudimentary adapter interrupts).

The subchannel-identifying parameters are encoded into the interrupt
type.

I/O interrupts are floating, so they can't be injected on a specific
vcpu.
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Introduce helper functions for decoding the various base/displacement
instruction formats.
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

These tables are never modified.
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

With emulate_invalid_guest_state=0 if a vcpu is in real mode VMX can
enter the vcpu with smaller segment limit than guest configured.  If the
guest tries to access pass this limit it will get #GP at which point
instruction will be emulated with correct segment limit applied. If
during the emulation IO is detected it is not handled correctly. Vcpu
thread should exit to userspace to serve the IO, but it returns to the
guest instead.  Since emulation is not completed till userspace completes
the IO the faulty instruction is re-executed ad infinitum.

The patch fixes that by exiting to userspace if IO happens during
instruction emulation.
Reported-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Segment registers will be fixed according to current emulation policy
during switching to real mode for the first time.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Currently when emulation of invalid guest state is enable
(emulate_invalid_guest_state=1) segment registers are still fixed for
entry to vm86 mode some times. Segment register fixing is avoided in
enter_rmode(), but vmx_set_segment() still does it unconditionally.
The patch fixes it.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Currently it allows entering vm86 mode if segment limit is greater than
0xffff and db bit is set. Both of those can cause incorrect execution of
instruction by cpu since in vm86 mode limit will be set to 0xffff and db
will be forced to 0.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

According to Intel SDM Vol3 Section 5.5 "Privilege Levels" and 5.6
"Privilege Level Checking When Accessing Data Segments" RPL checking is
done during loading of a segment selector, not during data access. We
already do checking during segment selector loading, so drop the check
during data access. Checking RPL during data access triggers #GP if
after transition from real mode to protected mode RPL bits in a segment
selector are set.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Correct a typo in the comment explaining hypercalls.
Signed-off-by: NJesse Larrew <jlarrew@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Move repetitive code sequence to a separate function.
Reviewed-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Move all vm86_active logic into one place.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Segment descriptor's base is fixed by call to fix_rmode_seg(). Not need
to do it twice.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

The code for SS and CS does the same thing fix_rmode_seg() is doing.
Use it instead of hand crafted code.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

VMX without unrestricted mode cannot virtualize real mode, so if
emulate_invalid_guest_state=0 kvm uses vm86 mode to approximate
it. Sometimes, when guest moves from protected mode to real mode, it
leaves segment descriptors in a state not suitable for use by vm86 mode
virtualization, so we keep shadow copy of segment descriptors for internal
use and load fake register to VMCS for guest entry to succeed. Till
now we kept shadow for all segments except SS and CS (for SS and CS we
returned parameters directly from VMCS), but since commit a5625189
emulator enforces segment limits in real mode. This causes #GP during move
from protected mode to real mode when emulator fetches first instruction
after moving to real mode since it uses incorrect CS base and limit to
linearize the %rip. Fix by keeping shadow for SS and CS too.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

rmode_segment_valid() checks if segment descriptor can be used to enter
vm86 mode. VMX spec mandates that in vm86 mode CS register will be of
type data, not code. Lets allow guest entry with vm86 mode if the only
problem with CS register is incorrect type. Otherwise entire real mode
will be emulated.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Set segment fields explicitly instead of using  binary operations.

No behaviour changes.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Previous patch "kvm: Minor memory slot optimization" (b7f69c55)
overlooked the generation field of the memory slots.  Re-using the
original memory slots left us with with two slightly different memory
slots with the same generation.  To fix this, make update_memslots()
take a new parameter to specify the last generation.  This also makes
generation management more explicit to avoid such problems in the future.
Reported-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

This hack is wrong. The pin number of PIT is connected to
2 not 0. This means this hack never takes effect. So it is ok
to remove it.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Add a driver for kvm guests that matches virtual ccw devices provided
by the host as virtio bridge devices.

These virtio-ccw devices use a special set of channel commands in order
to perform virtio functions.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Get the definition of struct subchannel_id.
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Running under a kvm host does not necessarily imply the presence of
a page mapped above the main memory with the virtio information;
however, the code includes a hard coded access to that page.

Instead, check for the presence of the page and exit gracefully
before we hit an addressing exception if it does not exist.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
cc: stable@vger.kernel.org
Signed-off-by: NGleb Natapov <gleb@redhat.com>