Don't duplicate the buffer type checks in enum/g/s/try_fmt.
The check_fmt function does that already.

It is hard to keep the checks in sync for all these functions and
in fact the check for VBI was wrong in the _fmt functions as it
allowed SDR types as well. This caused a v4l2-compliance failure
for /dev/swradio0 using vivid.

This simplifies the code and keeps the check in one place and
fixes the SDR/VBI bug.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Cc: <stable@vger.kernel.org>      # for v4.15 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There are a lot of places where sequences of space/tabs are
found. Get rid of all spaces before tabs.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add a pixel format, used by the UVC driver to stream metadata.
Signed-off-by: NGuennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add IPU3 specific formats:

	V4L2_PIX_FMT_IPU3_SBGGR10
	V4L2_PIX_FMT_IPU3_SGBRG10
	V4L2_PIX_FMT_IPU3_SGRBG10
	V4L2_PIX_FMT_IPU3_SRGGB10
Signed-off-by: NYong Zhi <yong.zhi@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

max_width and max_height are swap with step_width and step_height.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

These formats are compressed 12-bit raw bayer formats with four different
pixel orders. They are similar to 10-bit variants. The formats added by
this patch are

	V4L2_PIX_FMT_SBGGR12P
	V4L2_PIX_FMT_SGBRG12P
	V4L2_PIX_FMT_SGRBG12P
	V4L2_PIX_FMT_SRGGB12P
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The type field in struct v4l2_selection is supposed to never use the
_MPLANE variants. E.g. if the driver supports V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE,
then userspace should still pass V4L2_BUF_TYPE_VIDEO_CAPTURE.

The reasons for this are lost in the mists of time, but it is really
annoying. In addition, the exynos drivers didn't follow this rule and
instead expected the _MPLANE type.

To fix that code is added to the v4l2 core that maps the _MPLANE buffer
types to their regular equivalents before calling the driver.

Effectively this allows for userspace to use either _MPLANE or the regular
buffer type. This keeps backwards compatibility while making things easier
for userspace.

Since drivers now never see the _MPLANE buffer types the exynos drivers
had to be adapted as well.
Signed-off-by: NHans Verkuil <hansverk@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There are multiple places where arrays or otherwise variable sized
buffer are allocated through V4L2 core code, including things like
controls, memory pages, staging buffers for ioctls and so on. Such
allocations can potentially require an order > 0 allocation from the
page allocator, which is not guaranteed to be fulfilled and is likely to
fail on a system with severe memory fragmentation (e.g. a system with
very long uptime).

Since the memory being allocated is intended to be used by the CPU
exclusively, we can consider using vmalloc() as a fallback and this is
exactly what the recently merged kvmalloc() helpers do. A kmalloc() call
is still attempted, even for order > 0 allocations, but it is done
with __GFP_NORETRY and __GFP_NOWARN, with expectation of failing if
requested memory is not available instantly. Only then the vmalloc()
fallback is used. This should give us fast and more reliable allocations
even on systems with higher memory pressure and/or more fragmentation,
while still retaining the same performance level on systems not
suffering from such conditions.

While at it, replace explicit array size calculations on changed
allocations with kvmalloc_array().

Purposedly not touching videobuf1, as it is deprecated, has only few
users remaining and would rather be seen removed instead.
Signed-off-by: NTomasz Figa <tfiga@chromium.org>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This patch adds support for the three new SDR formats. These formats
were prefixed with "planar" indicating I & Q data are not interleaved
as in other formats. Here, I & Q data constitutes the top half and bottom
half of the received buffer respectively.

V4L2_SDR_FMT_PCU16BE - 14-bit complex (I & Q) unsigned big-endian sample
inside 16-bit. V4L2 FourCC: PC16

V4L2_SDR_FMT_PCU18BE - 16-bit complex (I & Q) unsigned big-endian sample
inside 18-bit. V4L2 FourCC: PC18

V4L2_SDR_FMT_PCU20BE - 18-bit complex (I & Q) unsigned big-endian sample
inside 20-bit. V4L2 FourCC: PC20
Signed-off-by: NRamesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: NHans Verkuil <hansverk@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The VIDIOC_G/S_EDID ioctls can return valid data even if an error is returned.

Mark those ioctls accordingly. Rather than using an explicit 'if' to check for the
ioctl (as was done until now for VIDIOC_QUERY_DV_TIMINGS) just set a new flag in the
v4l2_ioctls array.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The format is used on the R-Car VSP1 video queues that carry
2-D histogram statistics data.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The format is used on the R-Car VSP1 video queues that carry
1-D histogram statistics data.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The metadata buffer type is used to transfer metadata between userspace
and kernelspace through a V4L2 buffers queue. It comes with a new
metadata capture capability and format description.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: NGuennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: removed left-over 'experimental' note]
[hans.verkuil@cisco.com: add newline after _v4l2-meta-format label]
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Provide the frame structure and data layout of V4L2-PIX-FMT-INZI
format utilized by Intel SR300 Depth camera.
Signed-off-by: NEvgeni Raikhel <evgeni.raikhel@intel.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The formats have been added without a description, fix that.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The formats added by this patch are:

	V4L2_PIX_FMT_SBGGR16
	V4L2_PIX_FMT_SGBRG16
	V4L2_PIX_FMT_SGRBG16

V4L2_PIX_FMT_SRGGB16 already existed before the patch. Rework the
documentation to match that of the other sample depths.

Also align the description of V4L2_PIX_FMT_SRGGB16 to match with other
similar formats.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: NLad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

These formats store the color information of the image
in a geometrical representation. The colors are mapped into a
cylinder, where the angle is the HUE, the height is the VALUE
and the distance to the center is the SATURATION. This is a very
useful format for image segmentation algorithms.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add V4L2_PIX_FMT_MT21C format used on MT8173 driver.
It is compressed format and need MT8173 MDP driver to transfer to other
standard format.
Signed-off-by: NTiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

VP9 is a video coding format and a successor to VP8.
Signed-off-by: NWu-Cheng Li <wuchengli@chromium.org>
Signed-off-by: NTiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.

As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.

So, join those continuation lines.

The patch was generated via the script below, and manually
adjusted if needed.

</script>
use Text::Tabs;
while (<>) {
	if ($next ne "") {
		$c=$_;
		if ($c =~ /^\s+\"(.*)/) {
			$c2=$1;
			$next =~ s/\"\n$//;
			$n = expand($next);
			$funpos = index($n, '(');
			$pos = index($c2, '",');
			if ($funpos && $pos > 0) {
				$s1 = substr $c2, 0, $pos + 2;
				$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
				$s2 =~ s/^\s+//;

				$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");

				print unexpand("$next$s1\n");
				print unexpand("$s2\n") if ($s2 ne "");
			} else {
				print "$next$c2\n";
			}
			$next="";
			next;
		} else {
			print $next;
		}
		$next="";
	} else {
		if (m/\"$/) {
			if (!m/\\n\"$/) {
				$next=$_;
				next;
			}
		}
	}
	print $_;
}
</script>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The S_FMT and TRY_FMT handlers in multiplane mode attempt at clearing
the reserved fields of the v4l2_format structure after the pix_mp
member. However, the reserved fields are inside pix_mp, not after it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: NKieran Bingham <kieran@bingham.xyz>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Some touch controllers send out touch data in a similar way to a
greyscale frame grabber.

Add new device type VFL_TYPE_TOUCH:
- This uses a new device prefix v4l-touch for these devices, to stop
  generic capture software from treating them as webcams. Otherwise,
  touch is treated similarly to video capture.
- Add V4L2_INPUT_TYPE_TOUCH
- Add MEDIA_INTF_T_V4L_TOUCH
- Add V4L2_CAP_TOUCH to indicate device is a touch device

Add formats:
- V4L2_TCH_FMT_DELTA_TD16 for signed 16-bit touch deltas
- V4L2_TCH_FMT_DELTA_TD08 for signed 16-bit touch deltas
- V4L2_TCH_FMT_TU16 for unsigned 16-bit touch data
- V4L2_TCH_FMT_TU08 for unsigned 8-bit touch data

This support will be used by:
- Atmel maXTouch (atmel_mxt_ts)
- Synaptics RMI4.
- sur40
Signed-off-by: NNick Dyer <nick@shmanahar.org>
Tested-by: NChris Healy <cphealy@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This field should be zeroed. Both for s_dv_timings and for enum_dv_timings.
In fact, for the latter anything after the pad field can be zeroed.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fix duplicate tests in condition. The second test for vidioc_cropcap
should have tested for vidioc_g_selection instead.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reported-by: NDavid Binderman <linuxdev.baldrick@gmail.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

- Add a check for the case that both the cropcap and g_selection ops
  are NULL. This shouldn't happen, but I feel happier if the code
  guards against this.

- If g_selection exists, then ignore ENOTTY and ENOIOCTLCMD error
  codes from cropcap. Just assume square pixelaspect ratio in that
  case. This situation can happen if the bridge driver's cropcap op
  calls the corresponding subdev's op. So the cropcap ioctl is set,
  but it might return ENOIOCTLCMD anyway. In the past this would
  just return an error which is wrong.

- Call cropcap first and let g_selection overwrite the bounds and
  defrect. This safeguards against subdev cropcap implementations
  that set those rectangles as well. What g_selection returns has
  priority over what such cropcap implementations return.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

There are some issues rised on this patch during patch review.
I ended by merging this one by mistake. So, let's revert it.

This reverts commit 54ace1cf.

Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of a big if at the beginning, just check if g_selection == NULL
and call the cropcap op immediately and return the result.

No functional changes in this patch.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of letting drivers fill in device_caps at querycap time,
let them fill it in when the video device is registered.

This has the advantage that in the future the v4l2 core can access
the video device's capabilities and take decisions based on that.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The plane order is YUV, not YVU.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Change s_input, s_fmt, s_tuner, s_frequency, querystd, s_hw_freq_seek,
and vb2_core_streamon interfaces that alter the tuner configuration to
check if it is free, by calling v4l_enable_media_source().

If source isn't free, return -EBUSY.

v4l_disable_media_source() is called from v4l2_fh_exit() to release
tuner (source).

vb2_core_streamon() uses v4l_vb2q_enable_media_source().
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The formats use three planes through the multiplanar API, allowing for
non-contiguous planes in memory.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Replace the obsolete field ctrl_class with "which".

Make sure it not used in future modules by commenting out the field with
ifndef __KERNEL_ .

The field cannot be simply removed because that would be change on the
kenel API to the userspace (and we don't like that).
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add type field to that struct like it counterpart v4l2_tuner
already has. We need type field to distinguish different tuner
types from each others for transmitter too.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

New IOCTL ops:
vidioc_enum_fmt_sdr_out
vidioc_g_fmt_sdr_out
vidioc_s_fmt_sdr_out
vidioc_try_fmt_sdr_out

New vb2 buffertype:
V4L2_BUF_TYPE_SDR_OUTPUT

New v4l2 capability:
V4L2_CAP_SDR_OUTPUT
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

SDR receiver has ADC (Analog-to-Digital Converter) and SDR transmitter
has DAC (Digital-to-Analog Converter). Originally I though it could
be good idea to have own type for receiver and transmitter, but now I
feel one common type for SDR is enough. So lets rename it.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Acked-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: this was added in 4.4, so update 4.2 to 4.4]
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Make videobuf2-v4l2 as a wrapper of videobuf2-core for v4l2-use.
And replace videobuf2-core.h with videobuf2-v4l2.h.
This renaming change should be accompanied by the modifications
of all device drivers that include videobuf2-core.h.
It can be done with just running this shell script.

replace()
{
str1=$1
str2=$2
dir=$3
for file in $(find $dir -name *.h -o -name *.c -o -name Makefile)
do
    echo $file
    sed "s/$str1/$str2/g" $file > $file.out
    mv $file.out $file
done
}

replace "videobuf2-core" "videobuf2-v4l2" "include/media/"
replace "videobuf2-core" "videobuf2-v4l2" "drivers/media/"
replace "videobuf2-core" "videobuf2-v4l2" "drivers/usb/gadget/"
replace "videobuf2-core" "videobuf2-v4l2" "drivers/staging/media/"
Signed-off-by: NJunghak Sung <jh1009.sung@samsung.com>
Signed-off-by: NGeunyoung Kim <nenggun.kim@samsung.com>
Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

To compile videobuf2-core as a module, the vb2_* tracepoints must be
exported from the videodev module. Instead of exporting vb2 tracepoint
symbols from v4l2-ioctl.c, move the tracepoint generation into a separate
file. This patch fixes the following build error in the modpost stage,
introduced by 2091f518 ("[media] videobuf2: add trace events"):

    ERROR: "__tracepoint_vb2_buf_done" undefined!
    ERROR: "__tracepoint_vb2_dqbuf" undefined!
    ERROR: "__tracepoint_vb2_qbuf" undefined!
    ERROR: "__tracepoint_vb2_buf_queue" undefined!
Suggested-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Currently, the warning for missing device_caps gives a backtrace like so:

[<ffffffff8175c199>] dump_stack+0x45/0x57
[<ffffffff8109ad5a>] warn_slowpath_common+0x8a/0xc0
[<ffffffff8109ae8a>] warn_slowpath_null+0x1a/0x20
[<ffffffffa0237453>] v4l_querycap+0x43/0x80 [videodev]
[<ffffffffa0237734>] __video_do_ioctl+0x2a4/0x320 [videodev]
[<ffffffff812207e5>] ? do_last+0x195/0x1210
[<ffffffffa023a11e>] video_usercopy+0x22e/0x5b0 [videodev]
[<ffffffffa0237490>] ? v4l_querycap+0x80/0x80 [videodev]
[<ffffffffa023a4b5>] video_ioctl2+0x15/0x20 [videodev]
[<ffffffffa0233733>] v4l2_ioctl+0x113/0x150 [videodev]
[<ffffffff81225798>] do_vfs_ioctl+0x2f8/0x4f0
[<ffffffff8113b2d4>] ? __audit_syscall_entry+0xb4/0x110
[<ffffffff81022d7c>] ? do_audit_syscall_entry+0x6c/0x70
[<ffffffff81225a11>] SyS_ioctl+0x81/0xa0
[<ffffffff8113b526>] ? __audit_syscall_exit+0x1f6/0x2a0
[<ffffffff81763549>] system_call_fastpath+0x12/0x17

This indicates that device_caps are missing but doesn't give
much of a clue which driver is actually at fault. Improve
the warning output by showing the capabilities and the
responsible driver.
Signed-off-by: NLaura Abbott <labbott@fedoraproject.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

If userspace passed the invalid buffer type 0 to the kernel, then the
kernel log would show 'type=(null)' since there was no string defined
for type 0. Fix this.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This field was never cleared by the kernel making future extensions
hard to implement. Clear it now.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>