- 04 9月, 2007 5 次提交
-
-
由 Linus Torvalds 提交于
-
-
-
- 03 9月, 2007 2 次提交
-
-
由 David Howells 提交于
Initialise s_flags in get_sb_mtd_aux() from the flags parameter. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Jason Lunz 提交于
I've bisected the deadlock when many small appends are done on jffs2 down to this commit: commit 6fe6900e Author: Nick Piggin <npiggin@suse.de> Date: Sun May 6 14:49:04 2007 -0700 mm: make read_cache_page synchronous Ensure pages are uptodate after returning from read_cache_page, which allows us to cut out most of the filesystem-internal PageUptodate calls. I didn't have a great look down the call chains, but this appears to fixes 7 possible use-before uptodate in hfs, 2 in hfsplus, 1 in jfs, a few in ecryptfs, 1 in jffs2, and a possible cleared data overwritten with readpage in block2mtd. All depending on whether the filler is async and/or can return with a !uptodate page. It introduced a wait to read_cache_page, as well as a read_cache_page_async function equivalent to the old read_cache_page without any callers. Switching jffs2_gc_fetch_page to read_cache_page_async for the old behavior makes the deadlocks go away, but maybe reintroduces the use-before-uptodate problem? I don't understand the mm/fs interaction well enough to say. [It's fine. dwmw2.] Signed-off-by: NJason Lunz <lunz@falooley.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
- 01 9月, 2007 29 次提交
-
-
由 Trond Myklebust 提交于
Ryusuke Konishi says: The recent truncate_complete_page() clears the dirty flag from a page before calling a_ops->invalidatepage(), ^^^^^^ static void truncate_complete_page(struct address_space *mapping, struct page *page) { ... cancel_dirty_page(page, PAGE_CACHE_SIZE); <--- Inserted here at kernel 2.6.20 if (PagePrivate(page)) do_invalidatepage(page, 0); ---> will call a_ops->invalidatepage() ... } and this is disturbing nfs_wb_page_priority() from calling nfs_writepage_locked() that is expected to handle the pending request (=nfs_page) associated with the page. int nfs_wb_page_priority(struct inode *inode, struct page *page, int how) { ... if (clear_page_dirty_for_io(page)) { ret = nfs_writepage_locked(page, &wbc); if (ret < 0) goto out; } ... } Since truncate_complete_page() will get rid of the page after a_ops->invalidatepage() returns, the request (=nfs_page) associated with the page becomes a garbage in nfs_inode->nfs_page_tree. ------------------------ Fix this by ensuring that nfs_wb_page_priority() recognises that it may also need to clear out non-dirty pages that have an nfs_page associated with them. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
According to the mount(2) man page, the proper error return code for the mount(2) system call when the special device name or the mounted-on directory name is too long is ENAMETOOLONG. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
The hostname was getting truncated in the new text-based NFS mount API. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Don't filter the return code from the in-kernel rpcbind or NFS mount clients. Return the real error code so that callers of the new NFS text-based mount API can apply a useful retry strategy. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
The new text-based NFS mount option parsing logic doesn't recognize any valid transport protocols due to a silly mistake in the protocol token matching logic. This prevents basic mount requests such as: mount.nfs server:/export /mnt -o proto=tcp from working with the new text-based NFS mount API. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
This patch fixes an Oops that was reported by Gabriel Barazer. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
This should fix the following Oops reported by Jeff Garzik: kernel BUG at fs/nfs/nfs4xdr.c:1040! invalid opcode: 0000 [1] SMP CPU 0 Modules linked in: nfs lockd sunrpc af_packet ipv6 cpufreq_ondemand acpi_cpufreq battery floppy nvram sg snd_hda_intel ata_generic snd_pcm_oss snd_mixer_oss snd_pcm i2c_i801 snd_page_alloc e1000 firewire_ohci ata_piix i2c_core sr_mod cdrom sata_sil ahci libata sd_mod scsi_mod ext3 jbd ehci_hcd uhci_hcd Pid: 16353, comm: 10.10.10.1-recl Not tainted 2.6.23-rc3 #1 RIP: 0010:[<ffffffff88240980>] [<ffffffff88240980>] :nfs:encode_open+0x1c0/0x330 RSP: 0018:ffff8100467c5c60 EFLAGS: 00010202 RAX: ffff81000f89b8b8 RBX: 00000000697a6f6d RCX: ffff81000f89b8b8 RDX: 0000000000000004 RSI: 0000000000000004 RDI: ffff8100467c5c80 RBP: ffff8100467c5c80 R08: ffff81000f89bc30 R09: ffff81000f89b83f R10: 0000000000000001 R11: ffffffff881e79e0 R12: ffff81003cbd1808 R13: ffff81000f89b860 R14: ffff81005fc984e0 R15: ffffffff88240af0 FS: 0000000000000000(0000) GS:ffffffff8052a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00002adb9e51a030 CR3: 000000007ea7e000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process 10.10.10.1-recl (pid: 16353, threadinfo ffff8100467c4000, task ffff8100038ce780) Stack: ffff81004aeb6a40 ffff81003cbd1808 ffff81003cbd1808 ffffffff88240b5d ffff81000f89b8bc ffff81005fc984e8 ffff81000f89bc30 ffff81005fc984e8 0000000300000000 0000000000000000 0000000000000000 ffff81003cbd1800 Call Trace: [<ffffffff88240b5d>] :nfs:nfs4_xdr_enc_open_noattr+0x6d/0x90 [<ffffffff881e74b7>] :sunrpc:rpcauth_wrap_req+0x97/0xf0 [<ffffffff88240af0>] :nfs:nfs4_xdr_enc_open_noattr+0x0/0x90 [<ffffffff881df57a>] :sunrpc:call_transmit+0x18a/0x290 [<ffffffff881e5e7b>] :sunrpc:__rpc_execute+0x6b/0x290 [<ffffffff881dff76>] :sunrpc:rpc_do_run_task+0x76/0xd0 [<ffffffff882373f6>] :nfs:_nfs4_proc_open+0x76/0x230 [<ffffffff88237a2e>] :nfs:nfs4_open_recover_helper+0x5e/0xc0 [<ffffffff88237b74>] :nfs:nfs4_open_recover+0xe4/0x120 [<ffffffff88238e14>] :nfs:nfs4_open_reclaim+0xa4/0xf0 [<ffffffff882413c5>] :nfs:nfs4_reclaim_open_state+0x55/0x1b0 [<ffffffff882417ea>] :nfs:reclaimer+0x2ca/0x390 [<ffffffff88241520>] :nfs:reclaimer+0x0/0x390 [<ffffffff8024e59b>] kthread+0x4b/0x80 [<ffffffff8020cad8>] child_rip+0xa/0x12 [<ffffffff8024e550>] kthread+0x0/0x80 [<ffffffff8020cace>] child_rip+0x0/0x12 Code: 0f 0b eb fe 48 89 ef c7 00 00 00 00 02 be 08 00 00 00 e8 79 RIP [<ffffffff88240980>] :nfs:encode_open+0x1c0/0x330 RSP <ffff8100467c5c60> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Doh! We can't use cancel_delayed_work_sync because we may have been called from an unmount that was being performed by nfs_automount_task. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Ondrej Zary 提交于
I think that I've found and fixed the problem. There is a copy/paste bug in vt6421_set_dma_mode() function which causes wrong values to be written to PATA_UDMA_TIMING register. This patch fixes a copy/paste bug that breaks DMA modes on VT6421 PATA port. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
If you don't terminate a list, bad things happen... Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Peter Chubb 提交于
After my last patch we have a new header file for HP simulator use. Here's code to use it for stuff that used to have `extern' statements inline in the code. Functionality should not change with this patch. Signed-off-by: NPeter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Peter Chubb 提交于
This patch cleans up the `enable early console for SKI' patch (471e7a44), and 1. potentially allows the gensparse_defconfig to work again. (there are other problems running a generic kernel on Ski) 2. fixes the `console registered twice' problem. 3. Cleans up the code by moving the `extern hpsim_cons' declaration to a new asm/hpsim.h file. Thanks to Jes for comments. Signed-off-by: NPeter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Prarit Bhargava 提交于
When dumping memory via sysrq-m it is possible to take a bogus NMI watchdog or softlockup watchdog because the dump can take a long time on big memory systems. Occasionally tickle the watchdog when doing the dump. Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 John Keller 提交于
Add additional support for CPU disable on SN platforms. Correctly setup the smp_affinity mask for I/O error IRQs. Restrict the use of the feature to Altix 4000 and 450 systems running with a CPU disable capable PROM, and do not allow disabling of CPU 0. Signed-off-by: NJohn Keller <jpk@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Jesper Juhl 提交于
vmalloc() returns a void pointer - no need to cast it. Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Roman Zippel 提交于
Avoid setting the value if the symbol doesn't need to be changed or can't be changed. Later choices may change the dependencies and thus the possible input range. make oldconfig from a 2.6.22 .config with CONFIG_HOTPLUG_CPU not set was in some configurations setting CONFIG_HOTPLUG_CPU=y without asking, even when there was no actual requirement for CONFIG_HOTPLUG_CPU. This was triggered by SUSPEND_SMP that does a select HOTPLUG_CPU. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Tested-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup: [x86 setup] Don't rely on the VESA BIOS being register-clean
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: SRQ fixes to enable IPoIB CM IB/ehca: Fix Small QP regressions
-
由 Trond Myklebust 提交于
This avoids the recent NFS mount regression (returning EBUSY when mounting the same filesystem twice with different parameters). The best I can do given the constraints appears to be to have the kernel first look for a superblock that matches both the fsid and the user-specified mount options, and then spawn off a new superblock if that search fails. Note that this is not the same as specifying nosharecache everywhere since nosharecache will never attempt to match an existing superblock. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Tested-by: NHua Zhong <hzhong@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
lguest didn't initialize the kernel stack the way a real i386 kernel does, and ended up triggering a corner-case in the stack frame checking that doesn't happen on naive i386, and that the stack dumping didn't handle quite right. This makes the frame handling more correct, and tries to clarify the code at the same time so that it's a bit more obvious what is going on. Thanks to Rusty Russell for debugging the lguest failure- Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The HPET clocksource in drivers/char/hpet.c was written as generic code for ia64, but it is not yet ready to replace the native HPET clocksource implementations that the i386/x86-64 architectures use. On x86[-64], trying to register this clocksource results in potentially multiple hpet-based clocksources being registered, and if the ia64 one is chosen on x86_64 some users have experienced hangs. Eventually all three architectures may end up using the same code, but that is not the case right now. Cc: John Stultz <johnstul@us.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Paolo Ornati <ornati@fastwebnet.it> Cc: Bob Picco <bob.picco@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: - cxgb3 engine microcode load cxgb3 - Fix dev->priv usage qeth: Drop ARP packages on HiperSockets interface with NOARP attribute. qeth: provide specific message for OSA-adapters exclusively used qeth: crash during reboot after failing online setting qeth: Announce tx checksumming for qeth devices in TSO/EDDP mode qeth: dont return the return values of void functions. qeth: enforce a rate limit for inbound scatter gather messages qeth: ungrouping a device must not be interruptible netxen: fix crashes during module unload netxen: Avoid firmware load in PCI probe PS3: fix the bug that 'ifconfig down' would hang IOC3: Program UART predividers.
-
由 David S. Miller 提交于
Reported by Rick Jones. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joachim Fenkes 提交于
Fix ehca SRQ support so that IPoIB connected mode works: - Report max_srq > 0 if SRQ is supported - Report "last wqe reached" asynchronous event when base QP dies; this is required by the IB spec and IPoIB CM relies on receiving it when cleaning up. Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Stefan Roscher 提交于
The new Small QP code had a few bugs that would also make it trigger for non-Small QPs. Fix them. Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 H. Peter Anvin 提交于
The VESA BIOS is specified to be register-clean. However, we have now found at least one system which violates that. Thus, be as paranoid about VESA calls as about everything else. Huge thanks to Will Simoneau for reporting, diagnosing, and testing this out on Dell Inspiron 5150. Cc: Will Simoneau <simoneau@ele.uri.edu> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: sched: clean up task_new_fair() sched: small schedstat fix sched: fix wait_start_fair condition in update_stats_wait_end() sched: call update_curr() in task_tick_fair() sched: make the scheduler converge to the ideal latency sched: fix sleeper bonus limit
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] Bump driver versions ata_piix: implement IOCFG bit18 quirk libata: implement BROKEN_HPA horkage and apply it to affected drives sata_promise: FastTrack TX4200 is a second-generation chip pata_marvell: Add more identifiers ata_piix: add Satellite U200 to broken suspend list ata: add ATA_MWDMA* and ATA_SWDMA* defines ata_piix: IDE mode SATA patch for Intel Tolapai libata-core: Allow translation setting to fail
-
- 31 8月, 2007 4 次提交
-
-
由 Divy Le Ray 提交于
Load the engine microcode when an interface is brought up, instead of of doing it when the module is loaded. Loosen up tight binding between the driver and the engine microcode version. There is no need for microcode update with T3A boards. Fix the file naming. Do a better job at logging the loading activity. Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Divy Le Ray 提交于
cxgb3 used netdev_priv() and dev->priv for different purposes. In 2.6.23, netdev_priv() == dev->priv, cxgb3 needs a fix. This patch is a partial backport of Dave Miller's changes in the net-2.6.24 git branch. Without this fix, cxgb3 crashes on 2.6.23. Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Klaus D. Wacker 提交于
A network interface can get ARP packets even when the interface has NOARP specified. In a HiperSockets environment this disturbs receiving systems when packets are sent on the multicast queue. (E.g. TCP/IP on z/VM issues messages reporting invalid data on the HiperSockets interface.) Qeth will no longer send ARP packets on HiperSockets interface when interface has the NOARP attribute. Signed-off-by: NKlaus D. Wacker <kdwacker@de.ibm.com> Signed-off-by: NUrsula Braun <braunu@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ursula Braun 提交于
Exclusive usage of OSA-cards has been introduced. Even though Linux does not make use of it, qeth should be prepared to receive a bad RC for some initialization steps. A meaningful message is now given, if an OSA-device is set online, even though the OSA-adapter is already exclusively used by another host. Signed-off-by: NUrsula Braun <braunu@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-