Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

This IP module is always present and has no external connections.
There is no reason to disable it in the device tree.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

This patch adds FB, Sharp-LQ035Q7 display (add-on module) and
corresponded pinctrl devicetree nodes to the Phytec PCM970 RDK.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

Tested with evtest.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

mx25pdk has a sgtl5000 codec connected to the I2C1 port.

Add support for it.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

Signed-off-by: NDenis Carikli <denis@eukrea.com>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

Signed-off-by: NDenis Carikli <denis@eukrea.com>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

Signed-off-by: NDenis Carikli <denis@eukrea.com>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDenis Carikli <denis@eukrea.com>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

Like other imx SoCs only one USB clock is needed on mx35.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

Like other imx SoCs only one USB clock is needed on mx25.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

The kernel was not able to boot from SD card because sdhc support
was not present into the dts.

A new entry for sdhc1 was added for vf610-twr board based on the
compatible entry present on imx53.

After applying these changes, the kernel is able to boot successfully
from SD card.
Signed-off-by: NCosmin Stoica <cosminstefan.stoica@freescale.com>
Signed-off-by: NChircu Bogdan <Bogdan.Chircu@freescale.com>
Signed-off-by: NEddy Petrisor <eddy.petrisor@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

GPIO4_8 is connected to the Ethernet PHY reset line, so populate the
'phy-reset-gpios' property accordingly.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

GPIO2_3 controls the power to the Ethernet PHY, so provide a regulator node
for this.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Instead of relying on the bootloader for configuring the FEC pins, pass the
FEC pin configuration via device tree instead.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

UART1 is the console port on mx25pdk board.

Add the pin configuration for UART1 port and also pass 'fsl,uart-has-rtscts'
to indicate that the port has RTS and CTS pins.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Keep the dt nodes sorted for better readability.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Make the red gpio led available to the user.

This can be toggled with the sysfs for example, or used as a heartbeat or mmc
activity light by changing the trigger.
Signed-off-by: NVincent Stehlé <vincent.stehle@freescale.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

This patch adds pin group for Synchronous Serial Interface 1 (SSI1)
for PCM-038 module and enables this interface. This change do nothing
at the current stage but helps to continue develop sound support.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

This patch adds missing pinctrl definition for SPI chipselect 1.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Add alias for FEC ethernet on i.MX to allow bootloaders (like U-Boot)
patch-in the MAC address for FEC using this alias.
Signed-off-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Cc: Eric Bénard <eric@eukrea.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: NDenis Carikli <denis@eukrea.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The asm-generic, big-endian version of zero_bytemask creates a mask of
bytes preceding the first zero-byte by left shifting ~0ul based on the
position of the first zero byte.

Unfortunately, if the first (top) byte is zero, the output of
prep_zero_mask has only the top bit set, resulting in undefined C
behaviour as we shift left by an amount equal to the width of the type.
As it happens, GCC doesn't manage to spot this through the call to fls(),
but the issue remains if architectures choose to implement their shift
instructions differently.

An example would be arch/arm/ (AArch32), where LSL Rd, Rn, #32 results
in Rd == 0x0, whilst on arch/arm64 (AArch64) LSL Xd, Xn, #64 results in
Xd == Xn.

Rather than check explicitly for the problematic shift, this patch adds
an extra shift by 1, replacing fls with __fls. Since zero_bytemask is
never called with a zero argument (has_zero() is used to check the data
first), we don't need to worry about calling __fls(0), which is
undefined.

Cc: <stable@vger.kernel.org>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This merges the patch to fix possible loss of dirty bit on munmap() or
madvice(DONTNEED).  If there are concurrent writers on other CPU's that
have the unmapped/unneeded page in their TLBs, their writes to the page
could possibly get lost if a third CPU raced with the TLB flush and did
a page_mkclean() before the page was fully written.

Admittedly, if you unmap() or madvice(DONTNEED) an area _while_ another
thread is still busy writing to it, you deserve all the lost writes you
could get.  But we kernel people hold ourselves to higher quality
standards than "crazy people deserve to lose", because, well, we've seen
people do all kinds of crazy things.

So let's get it right, just because we can, and we don't have to worry
about it.

* safe-dirty-tlb-flush:
  mm: split 'tlb_flush_mmu()' into tlb flushing and memory freeing parts

Pull btrfs fixes from Chris Mason.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: limit the path size in send to PATH_MAX
  Btrfs: correctly set profile flags on seqlock retry
  Btrfs: use correct key when repeating search for extent item
  Btrfs: fix inode caching vs tree log
  Btrfs: fix possible memory leaks in open_ctree()
  Btrfs: avoid triggering bug_on() when we fail to start inode caching task
  Btrfs: move btrfs_{set,clear}_and_info() to ctree.h
  btrfs: replace error code from btrfs_drop_extents
  btrfs: Change the hole range to a more accurate value.
  btrfs: fix use-after-free in mount_subvol()

Pull arm fixes from Russell King:
 "A number of fixes for the PJ4/iwmmxt changes which arm-soc forced me
  to take during the merge window.  This stuff should have been better
  tested and sorted out *before* the merge window"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8042/1: iwmmxt: allow to build iWMMXt on Marvell PJ4B
  ARM: 8041/1: pj4: fix cpu_is_pj4 check
  ARM: 8040/1: pj4: properly detect existence of iWMMXt coprocessor
  ARM: 8039/1: pj4: enable iWMMXt only if CONFIG_IWMMXT is set
  ARM: 8038/1: iwmmxt: explicitly check for supported architectures

Pull arm64 fixes from Catalin Marinas:
 - compat renameat2 syscall wiring and __NR_compat_syscalls fix
 - TLB fix for transparent huge pages following switch to generic
   mmu_gather
 - spinlock initialisation for init_mm's context
 - move of_clk_init() earlier
 - Kconfig duplicate entry fix

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: init: Move of_clk_init to time_init
  arm64: initialize spinlock for init_mm's context
  arm64: debug: remove noisy, pointless warning
  arm64: mm: Add THP TLB entries to general mmu_gather
  arm64: add renameat2 compat syscall
  ARM64: Remove duplicated Kconfig entry for "kernel/power/Kconfig"
  arm64: __NR_compat_syscalls fix

Pull irq fixes from Thomas Gleixner:
 "A slighlty large fix for a subtle issue in the CPU hotplug code of
  certain ARM SoCs, where the not yet online cpu needs to setup the cpu
  local timer and needs to set the interrupt affinity to itself.
  Setting interrupt affinity to a not online cpu is prohibited and
  therefor the timer interrupt ends up on the wrong cpu, which leads to
  nasty complications.

  The SoC folks tried to hack around that in the SoC code in some more
  than nasty ways.  The proper solution is to have a way to enforce the
  affinity setting to a not online cpu.  The core patch to the genirq
  code provides that facility and the follow up patches make use of it
  in the GIC interrupt controller and the exynos timer driver.

  The change to the core code has no implications to existing users,
  except for the rename of the locked function and therefor the
  necessary fixup in mips/cavium.  Aside of that, no runtime impact is
  possible, as none of the existing interrupt chips implements anything
  which depends on the force argument of the irq_set_affinity()
  callback"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: Exynos_mct: Register clock event after request_irq()
  clocksource: Exynos_mct: Use irq_force_affinity() in cpu bringup
  irqchip: Gic: Support forced affinity setting
  genirq: Allow forcing cpu affinity of interrupts

Pull tty/serial fixes from Greg KH:
 "Here are a few tty/serial fixes for 3.15-rc3 that resolve a number of
  reported issues in the 8250 and samsung serial drivers, as well as a
  character loss fix for the tty core that was caused by the lock
  removal patches a release ago"

* tag 'tty-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial_core: fix uart PORT_UNKNOWN handling
  serial: samsung: Change barrier() to cpu_relax() in console output
  serial: samsung: don't check config for every character
  serial: samsung: Use the passed in "port", fixing kgdb w/ no console
  serial: 8250: Fix thread unsafe __dma_tx_complete function
  8250_core: Fix unwanted TX chars write
  tty: Fix race condition between __tty_buffer_request_room and flush_to_ldisc

Pull staging / IIO driver fixes from Greg KH:
 "Here are some small staging and IIO driver fixes for 3.15-rc3.

  Nothing major at all, just some assorted issues that people have
  reported"

* tag 'staging-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: comedi: usbdux: bug fix for accessing 'ao_chanlist' in private data
  iio: adc: mxs-lradc: fix warning when buidling on avr32
  iio: cm36651: Fix i2c client leak and possible NULL pointer dereference
  iio: querying buffer scan_mask should return 0/1
  staging:iio:ad2s1200 fix a missing break
  iio: adc: at91_adc: correct default shtim value
  ARM: at91: at91sam9260: change at91_adc name
  ARM: at91: at91sam9g45: change at91_adc name
  iio: cm32181: Fix read integration time function
  iio: adc: at91_adc: Repair broken platform_data support

Merge tag 'driver-core-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are some kernfs fixes for 3.15-rc3 that resolve some reported
  problems.  Nothing huge, but all needed"

* tag 'driver-core-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  s390/ccwgroup: Fix memory corruption
  kernfs: add back missing error check in kernfs_fop_mmap()
  kernfs: fix a subdir count leak

Pull USB fixes from Greg KH:
 "Here are a number of USB fixes for 3.15-rc3.  The majority are gadget
  fixes, as we didn't get any of those in for 3.15-rc2.  The others are
  all over the place, and there's a number of new device id addtions as
  well."

* tag 'usb-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
  usb: option: add and update a number of CMOTech devices
  usb: option: add Alcatel L800MA
  usb: option: add Olivetti Olicard 500
  usb: qcserial: add Sierra Wireless MC7305/MC7355
  usb: qcserial: add Sierra Wireless MC73xx
  usb: qcserial: add Sierra Wireless EM7355
  USB: io_ti: fix firmware download on big-endian machines
  usb/xhci: fix compilation warning when !CONFIG_PCI && !CONFIG_PM
  xhci: extend quirk for Renesas cards
  xhci: Switch Intel Lynx Point ports to EHCI on shutdown.
  usb: xhci: Prefer endpoint context dequeue pointer over stopped_trb
  phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY
  phy: fix kernel oops in phy_lookup()
  phy: restore OMAP_CONTROL_PHY dependencies
  phy: exynos: fix building as a module
  USB: serial: fix sysfs-attribute removal deadlock
  usb: wusbcore: fix panic in wusbhc_chid_set
  usb: wusbcore: convert nested lock to use spin_lock instead of spin_lock_irq
  uwb: don't call spin_unlock_irq in a USB completion handler
  usb: chipidea: coordinate usb phy initialization for different phy type
  ...

Pull ACPI and power management fixes from Rafael Wysocki:
 "These include a fix for a recent ACPI regression related to device
  notifications, intel_idle fix related to IvyTown support, fix for a
  buffer size issue in ACPICA, PM core fix related to the "freeze" sleep
  state, four fixes for various types of breakage in cpufreq drivers, a
  PNP workaround for a wrong memory region size in ACPI tables, and a
  fix and cleanup for the ACPI tools Makefile.

  Specifics:

   - Fix for broken ACPI notifications on some systems caused by a
     recent ACPI hotplug commit that blocked the propagation of unknown
     type notifications to device drivers inadvertently.

   - intel_idle fix to make the IvyTown C-states handling (added
     recently) work as intended which now is broken due to missing
     braces.  From Christoph Jaeger.

   - ACPICA fix to make it allocate buffers of the right sizes for the
     Generic Serial Bus operation region access.  From Lv Zheng.

   - PM core fix unblocking cpuidle before entering the "freeze" sleep
     state which causes that state to be able to actually save more
     energy than runtime idle.

   - Configuration and build fixes for the highbank and powernv cpufreq
     drivers from Kefeng Wang and Srivatsa S Bhat.

   - Coccinelle warning fix related to error pointers for the unicore32
     cpufreq driver from Duan Jiong.

   - Integer overflow fix for the ppc-corenet cpufreq driver from Geert
     Uytterhoeven.

   - Workaround for BIOSes that don't report the entire Intel MCH area
     in their ACPI tables from Bjorn Helgaas.

   - ACPI tools Makefile fix and cleanup from Thomas Renninger"

* tag 'pm+acpi-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / notify: Do not block unknown type notifications in root handler
  PNP: Work around BIOS defects in Intel MCH area reporting
  cpufreq: highbank: fix ARM_HIGHBANK_CPUFREQ dependency warning
  cpufreq: ppc: Fix integer overflow in expression
  cpufreq, powernv: Fix build failure on UP
  cpufreq: unicore32: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  PM / suspend: Make cpuidle work in the "freeze" state
  intel_idle: fix IVT idle state table setting
  ACPICA: Fix buffer allocation issue for generic_serial_bus region accesses.
  tools/power/acpi: Minor bugfixes

fs_path_ensure_buf is used to make sure our path buffers for
send are big enough for the path names as we construct them.
The buffer size is limited to 32K by the length field in
the struct.

But bugs in the path construction can end up trying to build
a huge buffer, and we'll do invalid memmmoves when the
buffer length field wraps.

This patch is step one, preventing the overflows.
Signed-off-by: NChris Mason <clm@fb.com>

The mmu-gather operation 'tlb_flush_mmu()' has done two things: the
actual tlb flush operation, and the batched freeing of the pages that
the TLB entries pointed at.

This splits the operation into separate phases, so that the forced
batched flushing done by zap_pte_range() can now do the actual TLB flush
while still holding the page table lock, but delay the batched freeing
of all the pages to after the lock has been dropped.

This in turn allows us to avoid a race condition between
set_page_dirty() (as called by zap_pte_range() when it finds a dirty
shared memory pte) and page_mkclean(): because we now flush all the
dirty page data from the TLB's while holding the pte lock,
page_mkclean() will be held up walking the (recently cleaned) page
tables until after the TLB entries have been flushed from all CPU's.
Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: NDave Hansen <dave.hansen@intel.com>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* pnp:
  PNP: Work around BIOS defects in Intel MCH area reporting

* acpi-hotplug:
  ACPI / notify: Do not block unknown type notifications in root handler