Commit 97431204 introduced a regression
that causes SECINFO_NO_NAME to fail without sending an RPC if:

 1) the nfs_client's rpc_client is using krb5i/p (now tried by default)
 2) the current user doesn't have valid kerberos credentials

This situation is quite common - as of now a sec=sys mount would use
krb5i for the nfs_client's rpc_client and a user would hardly be faulted
for not having run kinit.

The solution is to use the machine cred when trying to use an integrity
protected auth flavor for SECINFO_NO_NAME.

Older servers may not support using the machine cred or an integrity
protected auth flavor for SECINFO_NO_NAME in every circumstance, so we fall
back to using the user's cred and the filesystem's auth flavor in this case.

We run into another problem when running against linux nfs servers -
they return NFS4ERR_WRONGSEC when using integrity auth flavor (unless the
mount is also that flavor) even though that is not a valid error for
SECINFO*.  Even though it's against spec, handle WRONGSEC errors on
SECINFO_NO_NAME by falling back to using the user cred and the
filesystem's auth flavor.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Also don't worry about obsolete mount flags...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In cases where the parent super block was not mounted with a 'sec=' line,
allow autonegotiation of security for the submounts.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure that nfs4_proc_lookup_common respects the NFS_MOUNT_SECFLAVOUR
flag.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

NFSv4 security auto-negotiation has been broken since
commit 4580a92d (NFS:
Use server-recommended security flavor by default (NFSv3))
because nfs4_try_mount() will automatically select AUTH_SYS
if it sees no auth flavours.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

What is the point of having a 'auth_flavor_len' field, if it is
always set to 1, and can't be used to determine if the user has
selected an auth flavour?
This cleanup goes back to using auth_flavor_len for its original
intended purpose, and gets rid of the ad-hoc replacements.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Commit 4edaa308 "NFS: Use "krb5i" to establish NFSv4 state whenever possible"
uses the nfs_client cl_rpcclient for all state management operations, and
will use krb5i or auth_sys with no regard to the mount command authflavor
choice.

The MDS, as any NFSv4.1 mount point, uses the nfs_server rpc client for all
non-state management operations with a different nfs_server for each fsid
encountered traversing the mount point, each with a potentially different
auth flavor.

pNFS data servers are not mounted in the normal sense as there is no associated
nfs_server structure. Data servers can also export multiple fsids, each with
a potentially different auth flavor.

Data servers need to use the same authflavor as the MDS server rpc client for
non-state management operations. Populate a list of rpc clients with the MDS
server rpc client auth flavor for the DS to use.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

When coalescing requests into a single READ or WRITE RPC call, and there
is no file locking involved, we don't have to refuse coalescing for
requests where the lock owner information doesn't match.
Reported-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If we're doing buffered writes, and there is no file locking involved,
then we don't have to worry about whether or not the lock owner information
is identical.
By relaxing this check, we ensure that fork()ed child processes can write
to a page without having to first sync dirty data that was written
by the parent to disk.
Reported-by: NQuentin Barnes <qbarnes@gmail.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: NQuentin Barnes <qbarnes@gmail.com>

Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

WRITE and COMMIT can use the machine credential.

If WRITE is supported and COMMIT is not, make all (mach cred) writes FILE_SYNC4.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

TEST_STATEID and FREE_STATEID can use the machine credential.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

SECINFO and SECINFO_NONAME can use the machine credential.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

CLOSE and LOCKU can use the machine credential.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add nfs4_state_protect - the function responsible for switching to the machine
credential and the correct rpc client when SP4_MACH_CRED is in use.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is a minimal client side implementation of SP4_MACH_CRED.  It will
attempt to negotiate SP4_MACH_CRED iff the EXCHANGE_ID is using
krb5i or krb5p auth.  SP4_MACH_CRED will be used if the server supports the
minimal operations:

 BIND_CONN_TO_SESSION
 EXCHANGE_ID
 CREATE_SESSION
 DESTROY_SESSION
 DESTROY_CLIENTID

This patch only includes the EXCHANGE_ID negotiation code because
the client will already use the machine cred for these operations.

If the server doesn't support SP4_MACH_CRED or doesn't support the minimal
operations, the exchange id will be resent with SP4_NONE.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Rename the new 'recover_locks' kernel parameter to 'recover_lost_locks'
and change the default to 'false'. Document why in
Documentation/kernel-parameters.txt

Move the 'recover_lost_locks' kernel parameter to fs/nfs/super.c to
make it easy to backport to kernels prior to 3.6.x, which don't have
a separate NFSv4 module.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

When an NFSv4 client loses contact with the server it can lose any
locks that it holds.

Currently when it reconnects to the server it simply tries to reclaim
those locks.  This might succeed even though some other client has
held and released a lock in the mean time.  So the first client might
think the file is unchanged, but it isn't.  This isn't good.

If, when recovery happens, the locks cannot be claimed because some
other client still holds the lock, then we get a message in the kernel
logs, but the client can still write.  So two clients can both think
they have a lock and can both write at the same time.  This is equally
not good.

There was a patch a while ago
  http://comments.gmane.org/gmane.linux.nfs/41917

which tried to address some of this, but it didn't seem to go
anywhere.  That patch would also send a signal to the process.  That
might be useful but for now this patch just causes writes to fail.

For NFSv4 (unlike v2/v3) there is a strong link between the lock and
the write request so we can fairly easily fail any IO of the lock is
gone.  While some applications might not expect this, it is still
safer than allowing the write to succeed.

Because this is a fairly big change in behaviour a module parameter,
"recover_locks", is introduced which defaults to true (the current
behaviour) but can be set to "false" to tell the client not to try to
recover things that were lost.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

When CONFIG_NFS_V4_1 is not enabled, gcc emits this warning:

linux/fs/nfs/nfs4state.c:255:12: warning:
 ‘nfs4_begin_drain_session’ defined but not used [-Wunused-function]
 static int nfs4_begin_drain_session(struct nfs_client *clp)
            ^

Eventually NFSv4.0 migration recovery will invoke this function, but
that has not yet been merged.  Hide nfs4_begin_drain_session()
behind CONFIG_NFS_V4_1 for now.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

linux/fs/nfs/nfs4session.c:337:6: warning:
 symbol 'nfs41_set_target_slotid' was not declared. Should it be static?

Move nfs41_set_target_slotid() and nfs41_update_target_slotid() back
behind CONFIG_NFS_V4_1, since, in the final revision of this work,
they are used only in NFSv4.1 and later.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure OPEN_CONFIRM is not emitted while the transport is plugged.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure RELEASE_LOCKOWNER is not emitted while the transport is
plugged.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

When CONFIG_NFS_V4_1 is disabled, the calls to nfs4_setup_sequence()
and nfs4_sequence_done() are compiled out for the DELEGRETURN
operation.  To allow NFSv4.0 transport blocking to work for
DELEGRETURN, these call sites have to be present all the time.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Plumb in a mechanism for plugging an NFSv4.0 mount, using the
same infrastructure as NFSv4.1 sessions.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Anchor an nfs4_slot_table in the nfs_client for use with NFSv4.0
transport blocking.  It is initialized only for NFSv4.0 nfs_client's.

Introduce appropriate minor version ops to handle nfs_client
initialization and shutdown requirements that differ for each minor
version.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The nfs4_destroy_slot_tables() function is renamed to avoid
confusion with the new helper.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

I'd like to re-use NFSv4.1's slot table machinery for NFSv4.0
transport blocking.  Re-organize some of nfs4session.c so the slot
table code is built even when NFS_V4_1 is disabled.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Refactor nfs4_call_sync_sequence() so it is used for NFSv4.0 now.
The RPC callouts will house transport blocking logic similar to
NFSv4.1 sessions.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.0 will have need for this functionality when I add the ability
to block NFSv4.0 traffic before migration recovery.

I'm not really clear on why nfs4_set_sequence_privileged() gets a
generic name, but nfs41_init_sequence() gets a minor
version-specific name.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up: Both the NFSv4.0 and NFSv4.1 version of
nfs4_setup_sequence() are used only in fs/nfs/nfs4proc.c.  No need
to keep global header declarations for either version.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up: rename nfs41_call_sync_data for use as a data structure
common to all NFSv4 minor versions.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up, since slot and sequence numbers are all unsigned anyway.

Among other things, squelch compiler warnings:

linux/fs/nfs/nfs4proc.c: In function ‘nfs4_setup_sequence’:
linux/fs/nfs/nfs4proc.c:703:2: warning: signed and unsigned type in
	conditional expression [-Wsign-compare]

and

linux/fs/nfs/nfs4session.c: In function ‘nfs4_alloc_slot’:
linux/fs/nfs/nfs4session.c:151:31: warning: signed and unsigned type in
	conditional expression [-Wsign-compare]
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If an NFS client does

	mkdir("dir");
	fd = open("dir/file");
	unlink("dir/file");
	close(fd);
	rmdir("dir");

then the asynchronous nature of the sillyrename operation means that
we can end up getting EBUSY for the rmdir() in the above test. Fix
that by ensuring that we wait for any in-progress sillyrenames
before sending the rmdir() to the server.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Commit 5ec16a85 introduced a regression
that causes SECINFO to fail without actualy sending an RPC if:

 1) the nfs_client's rpc_client was using KRB5i/p (now tried by default)
 2) the current user doesn't have valid kerberos credentials

This situation is quite common - as of now a sec=sys mount would use
krb5i for the nfs_client's rpc_client and a user would hardly be faulted
for not having run kinit.

The solution is to use the machine cred when trying to use an integrity
protected auth flavor for SECINFO.

Older servers may not support using the machine cred or an integrity
protected auth flavor for SECINFO in every circumstance, so we fall back
to using the user's cred and the filesystem's auth flavor in this case.

We run into another problem when running against linux nfs servers -
they return NFS4ERR_WRONGSEC when using integrity auth flavor (unless the
mount is also that flavor) even though that is not a valid error for
SECINFO*.  Even though it's against spec, handle WRONGSEC errors on SECINFO
by falling back to using the user cred and the filesystem's auth flavor.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We must avoid buffering a WRITE that is using a credential key (e.g. a GSS
context key) that is about to expire or has expired.  We currently will
paint ourselves into a corner by returning success to the applciation
for such a buffered WRITE, only to discover that we do not have permission when
we attempt to flush the WRITE (and potentially associated COMMIT) to disk.

Use the RPC layer credential key timeout and expire routines which use a
a watermark, gss_key_expire_timeo. We test the key in nfs_file_write.

If a WRITE is using a credential with a key that will expire within
watermark seconds, flush the inode in nfs_write_end and send only
NFS_FILE_SYNC WRITEs by adding nfs_ctx_key_to_expire to nfs_need_sync_write.
Note that this results in single page NFS_FILE_SYNC WRITEs.
Signed-off-by: NAndy Adamson <andros@netapp.com>
[Trond: removed a pr_warn_ratelimited() for now]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>