- 22 9月, 2012 1 次提交
-
-
由 Suresh Siddha 提交于
Preemption is disabled between kernel_fpu_begin/end() and as such it is not a good idea to use these routines in kvm_load/put_guest_fpu() which can be very far apart. kvm_load/put_guest_fpu() routines are already called with preemption disabled and KVM already uses the preempt notifier to save the guest fpu state using kvm_put_guest_fpu(). So introduce __kernel_fpu_begin/end() routines which don't touch preemption and use them instead of kernel_fpu_begin/end() for KVM's use model of saving/restoring guest FPU state. Also with this change (and with eagerFPU model), fix the host cr0.TS vm-exit state in the case of VMX. For eagerFPU case, host cr0.TS is always clear. So no need to worry about it. For the traditional lazyFPU restore case, change the cr0.TS bit for the host state during vm-exit to be always clear and cr0.TS bit is set in the __vmx_load_host_state() when the FPU (guest FPU or the host task's FPU) state is not active. This ensures that the host/guest FPU state is properly saved, restored during context-switch and with interrupts (using irq_fpu_usable()) not stomping on the active FPU state. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1348164109.26695.338.camel@sbsiddha-desk.sc.intel.com Cc: Avi Kivity <avi@redhat.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 19 9月, 2012 13 次提交
-
-
由 Suresh Siddha 提交于
CPUs with FXSAVE but no XMM/MXCSR (Pentium II from Intel, Crusoe/TM-3xxx/5xxx from Transmeta, and presumably some of the K6 generation from AMD) ever looked at the mxcsr field during fxrstor/fxsave. So remove the cpu_has_xmm check in the fx_finit() Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1347300665-6209-6-git-send-email-suresh.b.siddha@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Suresh Siddha 提交于
Add the "eagerfpu=auto" (that selects the default scheme in enabling eagerfpu) which can override compiled-in boot parameters like "eagerfpu=on/off" (that force enable/disable eagerfpu). Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1347300665-6209-5-git-send-email-suresh.b.siddha@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Suresh Siddha 提交于
xsaveopt/xrstor support optimized state save/restore by tracking the INIT state and MODIFIED state during context-switch. Enable eagerfpu by default for processors supporting xsaveopt. Can be disabled by passing "eagerfpu=off" boot parameter. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1347300665-6209-3-git-send-email-suresh.b.siddha@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Suresh Siddha 提交于
Decouple non-lazy/eager fpu restore policy from the existence of the xsave feature. Introduce a synthetic CPUID flag to represent the eagerfpu policy. "eagerfpu=on" boot paramter will enable the policy. Requested-by: NH. Peter Anvin <hpa@zytor.com> Requested-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1347300665-6209-2-git-send-email-suresh.b.siddha@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Suresh Siddha 提交于
Fundamental model of the current Linux kernel is to lazily init and restore FPU instead of restoring the task state during context switch. This changes that fundamental lazy model to the non-lazy model for the processors supporting xsave feature. Reasons driving this model change are: i. Newer processors support optimized state save/restore using xsaveopt and xrstor by tracking the INIT state and MODIFIED state during context-switch. This is faster than modifying the cr0.TS bit which has serializing semantics. ii. Newer glibc versions use SSE for some of the optimized copy/clear routines. With certain workloads (like boot, kernel-compilation etc), application completes its work with in the first 5 task switches, thus taking upto 5 #DNA traps with the kernel not getting a chance to apply the above mentioned pre-load heuristic. iii. Some xstate features (like AMD's LWP feature) don't honor the cr0.TS bit and thus will not work correctly in the presence of lazy restore. Non-lazy state restore is needed for enabling such features. Some data on a two socket SNB system: * Saved 20K DNA exceptions during boot on a two socket SNB system. * Saved 50K DNA exceptions during kernel-compilation workload. * Improved throughput of the AVX based checksumming function inside the kernel by ~15% as xsave/xrstor is faster than the serializing clts/stts pair. Also now kernel_fpu_begin/end() relies on the patched alternative instructions. So move check_fpu() which uses the kernel_fpu_begin/end() after alternative_instructions(). Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1345842782-24175-7-git-send-email-suresh.b.siddha@intel.com Merge 32-bit boot fix from, Link: http://lkml.kernel.org/r/1347300665-6209-4-git-send-email-suresh.b.siddha@intel.com Cc: Jim Kukunas <james.t.kukunas@linux.intel.com> Cc: NeilBrown <neilb@suse.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Suresh Siddha 提交于
Instead of using unlazy_fpu() check if user_has_fpu() and set/clear the host TS bits so that the lguest works fine with both the lazy/non-lazy FPU host models with minimal changes. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1345842782-24175-6-git-send-email-suresh.b.siddha@intel.com Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Suresh Siddha 提交于
use kernel_fpu_begin/end() instead of unconditionally accessing cr0 and saving/restoring just the few used xmm/ymm registers. This has some advantages like: * If the task's FPU state is already active, then kernel_fpu_begin() will just save the user-state and avoiding the read/write of cr0. In general, cr0 accesses are much slower. * Manual save/restore of xmm/ymm registers will affect the 'modified' and the 'init' optimizations brought in the by xsaveopt/xrstor infrastructure. * Foward compatibility with future vector register extensions will be a problem if the xmm/ymm registers are manually saved and restored (corrupting the extended state of those vector registers). With this patch, there was no significant difference in the xor throughput using AVX, measured during boot. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1345842782-24175-5-git-send-email-suresh.b.siddha@intel.com Cc: Jim Kukunas <james.t.kukunas@linux.intel.com> Cc: NeilBrown <neilb@suse.de> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Suresh Siddha 提交于
kvm's guest fpu save/restore should be wrapped around kernel_fpu_begin/end(). This will avoid for example taking a DNA in kvm_load_guest_fpu() when it tries to load the fpu immediately after doing unlazy_fpu() on the host side. More importantly this will prevent the host process fpu from being corrupted. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1345842782-24175-4-git-send-email-suresh.b.siddha@intel.com Cc: Avi Kivity <avi@redhat.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Suresh Siddha 提交于
Few lines below we do drop_fpu() which is more safer. Remove the unnecessary user_fpu_end() in save_xstate_sig(), which allows the drop_fpu() to ignore any pending exceptions from the user-space and drop the current fpu. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1345842782-24175-3-git-send-email-suresh.b.siddha@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Suresh Siddha 提交于
No need to save the state with unlazy_fpu(), that is about to get overwritten by the state from the signal frame. Instead use drop_fpu() and continue to restore the new state. Also fold the stop_fpu_preload() into drop_fpu(). Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1345842782-24175-2-git-send-email-suresh.b.siddha@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Suresh Siddha 提交于
Currently for x86 and x86_32 binaries, fpstate in the user sigframe is copied to/from the fpstate in the task struct. And in the case of signal delivery for x86_64 binaries, if the fpstate is live in the CPU registers, then the live state is copied directly to the user sigframe. Otherwise fpstate in the task struct is copied to the user sigframe. During restore, fpstate in the user sigframe is restored directly to the live CPU registers. Historically, different code paths led to different bugs. For example, x86_64 code path was not preemption safe till recently. Also there is lot of code duplication for support of new features like xsave etc. Unify signal handling code paths for x86 and x86_64 kernels. New strategy is as follows: Signal delivery: Both for 32/64-bit frames, align the core math frame area to 64bytes as needed by xsave (this where the main fpu/extended state gets copied to and excludes the legacy compatibility fsave header for the 32-bit [f]xsave frames). If the state is live, copy the register state directly to the user frame. If not live, copy the state in the thread struct to the user frame. And for 32-bit [f]xsave frames, construct the fsave header separately before the actual [f]xsave area. Signal return: As the 32-bit frames with [f]xstate has an additional 'fsave' header, copy everything back from the user sigframe to the fpstate in the task structure and reconstruct the fxstate from the 'fsave' header (Also user passed pointers may not be correctly aligned for any attempt to directly restore any partial state). At the next fpstate usage, everything will be restored to the live CPU registers. For all the 64-bit frames and the 32-bit fsave frame, restore the state from the user sigframe directly to the live CPU registers. 64-bit signals always restored the math frame directly, so we can expect the math frame pointer to be correctly aligned. For 32-bit fsave frames, there are no alignment requirements, so we can restore the state directly. "lat_sig catch" microbenchmark numbers (for x86, x86_64, x86_32 binaries) are with in the noise range with this change. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1343171129-2747-4-git-send-email-suresh.b.siddha@intel.com [ Merged in compilation fix ] Link: http://lkml.kernel.org/r/1344544736.8326.17.camel@sbsiddha-desk.sc.intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Suresh Siddha 提交于
Consolidate x86, x86_64 inline asm routines saving/restoring fpu state using config_enabled(). Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1343171129-2747-3-git-send-email-suresh.b.siddha@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Suresh Siddha 提交于
Use config_enabled() to cleanup the definitions of is_ia32/is_x32. Move the function prototypes to the header file to cleanup ifdefs, and move the x32_setup_rt_frame() code around. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1343171129-2747-2-git-send-email-suresh.b.siddha@intel.com Merged in compilation fix from, Link: http://lkml.kernel.org/r/1344544736.8326.17.camel@sbsiddha-desk.sc.intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 05 9月, 2012 7 次提交
-
-
由 Mathias Krause 提交于
IOMMU_INIT_POST and IOMMU_INIT_POST_FINISH pass the plain value 0 instead of NULL to __IOMMU_INIT. Fix this and make sparse happy by doing so. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Joerg Roedel <joerg.roedel@amd.com> Link: http://lkml.kernel.org/r/1346621506-30857-8-git-send-email-minipli@googlemail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathias Krause 提交于
It's redundant and makes sparse complain about it. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Joerg Roedel <joerg.roedel@amd.com> Link: http://lkml.kernel.org/r/1346621506-30857-7-git-send-email-minipli@googlemail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathias Krause 提交于
Don't remove the __user annotation of the fpstate pointer, but drop the superfluous void * cast instead. This fixes the following sparse warnings: xsave.c:135:15: warning: cast removes address space of expression xsave.c:135:15: warning: incorrect type in argument 1 (different address spaces) xsave.c:135:15: expected void const volatile [noderef] <asn:1>*<noident> [...] Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1346621506-30857-6-git-send-email-minipli@googlemail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathias Krause 提交于
Stay in sync with the declaration and fix the corresponding sparse warnings. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Dan Williams <dan.j.williams@intel.com> Link: http://lkml.kernel.org/r/1346621506-30857-5-git-send-email-minipli@googlemail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathias Krause 提交于
Fix the following sparse warnings by adding appropriate __user casts and annotations: ia32_signal.c:165:38: warning: incorrect type in argument 1 (different address spaces) ia32_signal.c:165:38: expected struct sigaltstack const [noderef] [usertype] <asn:1>*<noident> ia32_signal.c:165:38: got struct sigaltstack * [...] Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com> Link: http://lkml.kernel.org/r/1346621506-30857-4-git-send-email-minipli@googlemail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathias Krause 提交于
The address calculated by VDSO32_SYMBOL() is a pointer into userland. Add the __user annotation to fix related sparse warnings in its users. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Andy Lutomirski <luto@MIT.EDU> Link: http://lkml.kernel.org/r/1346621506-30857-3-git-send-email-minipli@googlemail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathias Krause 提交于
Fix the following sparse warnings: sys_ia32.c:293:38: warning: incorrect type in argument 2 (different address spaces) sys_ia32.c:293:38: expected unsigned int [noderef] [usertype] <asn:1>*stat_addr sys_ia32.c:293:38: got unsigned int *stat_addr Ironically, sys_ia32.h was introduced to fix sparse warnings but missed that one. Signed-off-by: NMathias Krause <minipli@googlemail.com> Link: http://lkml.kernel.org/r/1346621506-30857-2-git-send-email-minipli@googlemail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 03 9月, 2012 2 次提交
-
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS fixes from Steve French. * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix cifs_do_create error hadnling cifs: print error code if smb signature verification fails CIFS: Fix log messages in packet checking for SMB2 CIFS: Protect i_nlink from being negative
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) NLA_PUT* --> nla_put_* conversion got one case wrong in nfnetlink_log, fix from Patrick McHardy. 2) Missed error return check in ipw2100 driver, from Julia Lawall. 3) PMTU updates in ipv4 were setting the expiry time incorrectly, fix from Eric Dumazet. 4) SFC driver erroneously reversed src and dst when reporting filters via ethtool. 5) Memory leak in CAN protocol and wrong setting of IRQF_SHARED in sja1000 can platform driver, from Alexey Khoroshilov and Sven Schmitt. 6) Fix multicast traffic scaling regression in ipv4_dst_destroy, only take the lock when we really need to. From Eric Dumazet. 7) Fix non-root process spoofing in netlink, from Pablo Neira Ayuso. 8) CWND reduction in TCP is done incorrectly during non-SACK recovery, fix from Yuchung Cheng. 9) Revert netpoll change, and fix what was actually a driver specific problem. From Amerigo Wang. This should cure bootup hangs with netconsole some people reported. 10) Fix xen-netfront invoking __skb_fill_page_desc() with a NULL page pointer. From Ian Campbell. 11) SIP NAT fix for expectiontation creation, from Pablo Neira Ayuso. 12) __ip_rt_update_pmtu() needs RCU locking, from Eric Dumazet. 13) Fix usbnet deadlock on resume, can't use GFP_KERNEL in this situation. From Oliver Neukum. 14) The davinci ethernet driver triggers an OOPS on removal because it frees an MDIO object before unregistering it. Fix from Bin Liu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) net: qmi_wwan: add several new Gobi devices fddi: 64 bit bug in smt_add_para() net: ethernet: fix kernel OOPS when remove davinci_mdio module net/xfrm/xfrm_state.c: fix error return code net: ipv6: fix error return code net: qmi_wwan: new device: Foxconn/Novatel E396 usbnet: fix deadlock in resume cs89x0 : packet reception not working netfilter: nf_conntrack: fix racy timer handling with reliable events bnx2x: Correct the ndo_poll_controller call bnx2x: Move netif_napi_add to the open call ipv4: must use rcu protection while calling fib_lookup bnx2x: fix 57840_MF pci id net: ipv4: ipmr_expire_timer causes crash when removing net namespace e1000e: DoS while TSO enabled caused by link partner with small MSS l2tp: avoid to use synchronize_rcu in tunnel free function gianfar: fix default tx vlan offload feature flag netfilter: nf_nat_sip: fix incorrect handling of EBUSY for RTCP expectation xen-netfront: use __pskb_pull_tail to ensure linear area is big enough on RX netfilter: nfnetlink_log: fix error return code in init path ...
-
- 02 9月, 2012 4 次提交
-
-
由 Bjørn Mork 提交于
Gobi devices are composite, needing both the qcserial and qmi_wwan drivers to support all functions. Re-syncing the list of supported devices with qcserial. Cc: Aleksander Morgado <aleksander@lanedo.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@tempietto.lan>
-
由 Dan Carpenter 提交于
The intent was to set 4 bytes of data so that's why the sp_len is set to 4 on the next line. The cast to u_long pointer clears 8 bytes on 64 bit arches. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@tempietto.lan>
-
由 Linus Torvalds 提交于
-
由 John Stultz 提交于
Andreas Bombe reported that the added ktime_t overflow checking added to timespec_valid in commit 4e8b1452 ("time: Improve sanity checking of timekeeping inputs") was causing problems with X.org because it caused timeouts larger then KTIME_T to be invalid. Previously, these large timeouts would be clamped to KTIME_MAX and would never expire, which is valid. This patch splits the ktime_t overflow checking into a new timespec_valid_strict function, and converts the timekeeping codes internal checking to use this more strict function. Reported-and-tested-by: NAndreas Bombe <aeb@debian.org> Cc: Zhouping Liu <zliu@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 9月, 2012 10 次提交
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: fix KVM_GET_MSR for PV EOI kvm: Fix nonsense handling of compat ioctl
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6由 Linus Torvalds 提交于
Pull PARISC fixes from James Bottomley: "This is a set of two bug fixes. One is the ATOMIC problem which is now causing a compile failure in certain situations. The other is mishandling of PER_LINUX32 which may also cause user visible effects. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] fix personality flag check in copy_thread() [PARISC] Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "A couple of s390 bug fixes for 3.5-rc4" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/32: Don't clobber personality flags on exec s390/smp: add missing smp_store_status() for !SMP s390/dasd: fix ioctl return value s390: Always use "long" for ssize_t to match size_t
-
由 Bin Liu 提交于
davinci mdio device is not unregistered from mdiobus when removing the module, which causes BUG_ON() when free the device from mdiobus. Calling mdiobus_unregister() before mdiobus_free() fixes the issue. Signed-off-by: NBin Liu <b-liu@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Initialize return variable before exiting on an error path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Initialize return variable before exiting on an error path. The initial initialization of the return variable is also dropped, because that value is never used. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aleksander Morgado 提交于
Foxconn-branded Novatel E396, Gobi3k modem. Cc: Dan Williams <dcbw@redhat.com> Cc: Bjørn Mork <bjorn@mork.no> Cc: Ben Chan <benchan@google.com> Signed-off-by: NAleksander Morgado <aleksander@lanedo.com> Acked-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Neukum 提交于
A usbnet device can share a multifunction device with a storage device. If the storage device is autoresumed the usbnet devices also needs to be autoresumed. Allocating memory with GFP_KERNEL can deadlock in this case. This should go back into all kernels that have commit 65841fd5 That is 3.5 Signed-off-by: NOliver Neukum <oneukum@suse.de> CC: stable@kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jaccon Bastiaansen 提交于
The RxCFG register of the CS89x0 could be configured incorrectly (because of misplaced parentheses), resulting in the disabling of packet reception. Signed-off-by: NJaccon Bastiaansen <jaccon.bastiaansen@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
-
- 31 8月, 2012 3 次提交
-
-
由 Pablo Neira Ayuso 提交于
Existing code assumes that del_timer returns true for alive conntrack entries. However, this is not true if reliable events are enabled. In that case, del_timer may return true for entries that were just inserted in the dying list. Note that packets / ctnetlink may hold references to conntrack entries that were just inserted to such list. This patch fixes the issue by adding an independent timer for event delivery. This increases the size of the ecache extension. Still we can revisit this later and use variable size extensions to allocate this area on demand. Tested-by: NOliver Smith <olipro@8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Merav Sicron 提交于
This patch correct poll_bnx2x (ndo_poll_controller call) which was not functioning well with MSI-X. Signed-off-by: NMerav Sicron <meravs@broadcom.com> Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Merav Sicron 提交于
Move netif_napi_add for all queues from the probe call to the open call, to avoid the case that napi objects are added for queues that may eventually not be initialized and activated. With the former behavior, the driver could crash when netpoll was calling ndo_poll_controller. Signed-off-by: NMerav Sicron <meravs@broadcom.com> Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-